Search Documents

By J. F. McDermott

The problem of converting our raw coal, and especially those coals that are not suited for long storage, in other words soft, into a fuel which would be at once clean; of a high B. t, u. content and low ash, is one that has occupied the minds of many able chemical engineers and hydrocarbon technologists during the past few years. Low temperature carbonization is the present outcome of this line of research, and many methods have been evolved of recent years to turn out a serviceable, useful fuel, and at the same time, save the by-products. As most of the research and data within my experience and knowledge pertains to lignite or sub-bituminous coals, I will confine my remarks to coals of that character and grade: I might say that Colorado coals, commonly called lignite, are not in reality true lignite, but are sub-bituminous, although I have in my possession an analysis of a Colorado coal which shows a moisture of 17 per cent, volatile 31.5 per cent, fixed carbon 28.8 per cent, and an ash of 22.7 per cent, and B. t. u. less than 8,000. Even this, though useless for domestic or indeed industrial purposes, could not be classified as true lignite. However, for the purposes of this paper I will refer to these coals as lignite. Two thousand pounds, or one ton, of raw lignite carries about 20 per cent moisture. This, of course, varies in some coals, but is, I believe, a fair average. For carbonization purposes this is usually dried to a 5 per cent moisture, therefore leaving but 1,700 pounds of coal to be placed in the retort. From present knowledge, and with the average process of carbonization, 70 per cent of this coal will come out carbonized, or 1,190 pounds, to which is added about 10 per cent pitch, which is fried out as the coal passes through the retort, and which is used as a binder, making a total of 1,360 pounds of coke or carbonized coal. This is usually in appearance a dark colored, rather porous coke of about the size of pea coal. It burns without smoke and have a very high B. t. u. content. According to most authorities on this subject, carbon, hydrogen, oxygen, nitrogen, sulphur and ash constitute the only elements on which carbonization value of a coal depends, and of these hydrogen is the most important. It is claimed the value of a coal for carbonization purposes may be roughly surmised from the hydrogen content. If this is promising, that is, showing an available hydrogen content of from 3 to 5 per cent, the coal should be given a careful ultimate analysis. Should the seam, as often happens in lignite coals, show varying bands of coal of different structure or appearance, samples should be taken from each band as well as a gross sample taken down the face of the seam in the usual way. This is in order to determine what part of the seam is most promising for by-product processes. A seam showing a high nitrogen content adds to the attractiveness of the coal in carbonizing as; if available nitrogen is 2 per cent or better, it should give a very high ammonia yield.

Jan 1, 1923

(The following discussion took place on this screen lecture in the dark.) MR. SHUBART: Would you give us a little .explanation as to the operation of this machine and what you are doing with it? MR. TESCHER: There is a 20- horsepower motor, rheostat, crusher, and a fan mounted on one base plate and operating on one shaft. The fan is overhung on the shaft. The only bearings you have are the bearings on each side of the crusher and the motor hearings. On one side of the ma- chine there is an opening for feeding shale. The machine is operated at 1,200 revolution per minute and as the shale is pulverized, the fan automatically exhausts fine dust from the crusher from an opening in the top of the crusher. The machine pulverizes 3,000 pounds in eight hours, reducing the materid to one hundred mesh. The last ma- chine we put in has been operating continuously fifteen hours a day for the past sixty days, without repairs of any kind. PRESIDENT LITTLEJOHN: Where is the machine in operation? MR. TESCHER. At the Royal mine. We have used ordinary mining ma- chine cable in local movements of the machines. This has enabled us to have twenty-two locations throughout the mines. The mine is highly gaesous, and the machines had to be placed on intake air. MR. SHUBSRT: What type of crusher do you use? MR. TESCHER. A No. 16 Universal, operating at 1,200 revolution per minute. M. SHURART: What material do you feed to it? MR. TESCHER: We have shale three-quarters of a mile from the mine. In the winter months we have been troubled with moisture. We build a kiln and get this shale and load it into the kiln for drying and then place it into a pit car and take it into the mine. The material must be dry. We have also used slate in the mine and have had good success. The slate at the mine is fairly hard. I presume, however, that the slate will probably carry a high silica content. MR. SHUBART: Mr. Harrington claims that silica does not do the harm, as was formerly supposed. MR. TESCHER: There is still a question as to whether it is harmful or not. PRESIDENT LITTLEJOHN: Are there any of these machines in operation closer than Aguilar? MR. TESCHER: There is one at the Alamo mine. Mr. Quealy also purchased a couple of them for use at his Wyoming mines. PRESIDENT LITTLEJOHN: Are there any other questions you would like to ask Mr. Tescher regarding his rock dusting machine while it is on the table for discussion? MR. DALRYMPLE, SR.: How many men does it take to operate it? MR. TESCHER: One man operates the machine. Sometimes we put the

Jan 1, 1925

The ninth annual Mine Rescue Evaluation was held in conjunction with the RMCMI 2000 convention at the Sheraton Tamarron Resort, Durango, Colorado June 25 thru 27. The purpose of the mine rescue evaluation program is to provide an opportunity for mine rescue teams to learn new skills and improve their existing ones in a non-competitive environment. Several staged "disaster" scenarios were [ ] held where the teams are called upon to exhibit their life saving abilities. The evaluators meanwhile are offering suggestions, both verbal and written, to help the teams better understand the situations presented them. This non-competitive environment allows the teams to work together and share their knowledge with fellow mine rescue teams providing everyone with a positive learning experience. Mine Rescue Chairman Bill Balaz was in charge of coordinating the events. Seven teams consisting of seven to ten members each (totaling 63 members) participated in the two-day event. Each team was required to respond to three different real-life scenarios plus a written general knowledge test daily. This year's four professional evaluators included Art Saenz (Hazardous Materials) of Western Envi¬ronmental Associates; Guy Horton (Ropes), Guy Horton Rope Rescue; Mary Bailey (Medical), MBA Training and Ron Lauer (Confined Space) also lassos Western Environmental Associates. They cash prov- [ ] ided three different challenging mock situations per day per team. The teams had no prior knowledge of what the scenarios would be as details were provided only as they arrived. Ten volunteer victims added much drama and excitement to the event. Their realistic enactments, complete with false blood makeup and severed limbs, made for some very tense scenarios. The Mine Rescue Teams participating this year were BHP LaPlata, BHP Navajo, BHP San Juan, all from Farmington, New Mexico; Bridger Coal Co., Rock Springs, Wyoming; Sabine Mining, Longview, Texas; Solvay Minerals, Green River, Wyoming and Western Energy Co., Colstrip, Montana. Many new [ ] friendships were made and much knowledge shared. A swap meet was held Saturday afternoon for the teams to exchange miscellaneous equipment, hats, shirts, etc. The teams were asked to evaluate the program and the evaluators. Then responded with many positive suggestions that will help improve the upcoming events in the years to come. Culmination of the Mine Rescue program was a Tuesday morning awards breakfast where the teams were presented with plaques. The participating victims and evaluators were also commended for their outstanding efforts. Sponsors for the Mine Rescue program were Big Sky Coal Company, CMC Rescue, Magnum Metals, Inc., and Rocky Mountain Electric. Many hours of volunteer time and effort from various family members of participants helped make the 2000 event a huge success.

Jan 1, 2000

By D. A. Stout

The Rouse Mine, belonging to the Colorado Fuel & Iron Company, earlier known as the Santa Clara Mine, is located at Rouse, Huerfano County, Colorado. Operations at this property started about the year 1899, after the old Rouse mine had been drowned out by a large flow of water coming from the strata underlying the Cameron seam. The present new Rouse mine was opened by a slope on what is familiarly known as the Walsen seam in the Walsenburg district. This slope has an average grade of 12 per cent bearing approximately, south 45 degrees west, and having at the present time a total length of 6300 feet. This seam has an average thickness at that property of five and one-half feet; however, there are sections of the mine where the thickness is from seven to eight feet. The mine has been developed. since the time it was opened on what is known as the Room and Pillar system ; water level entries have been driven right and left off the slope, and in some cases the rooms are driven directly up the pitch; and in other cases entries have been driven with rooms turned on water level courses. The first flow of water of which we have ally record was encountered in 1901 in what was called the "Second West Entry." This flow, however, was small, and did not require the installation of any large pump unit. From 1901 up until 1909 the flow increased normally as the field was developed. In January, 1909, the first large inflow occurred, coming from a break in the seventh west entry, making a total flow at that time of about 500 gallons per minute. This necessitated putting in larger pumps, and the first pump to be installed of the centrifugal type was a 600 gallon Worthington. By the year 1911 the water had increased, due to additional development, until it was found necessary to install an additional 600 gallon Worthington centrifugal type pump. In December, 1912, a break occurred in the eighth west entry, between the fourth and sixth cross entries, making 2000 gallons per minute. This flow decreased after a period of three weeks some 500 gallons, but on account of the quantity of water then being handled at the mine, and in view of the fact that we needed some reserve pumping equipment to take care of these flows, and additional 600-gallon Worthington centrifugal type pump was installed in June, 1913. An the latter part of 1914 a 250 gallon Reese roturbo was installed to take care of the water, which was being made in the lower workings of the slope. We found after the installation of the centrifugal pumps that the water decreased to a certain degree in the uppermost workings. This led us to believe that the field was being drained, more or less, and the head reduced ; however, our ideas in regard to this were again upset in December, 1915, when we encountered a flow in room 6 off the first cross entry on the ninth east entry. This flow was not as large as previous flows had been, but made 200 gallons per minute.

Jan 1, 1921

A great many questions were asked Mr. Bright, and Mr. Bright's opinion was given on a number of subjects. He spoke at length on spring suspension of locomotives, bringing out the necessity for better spring suspension due to heavier weights and higher speeds now developed. The subject of dynamic braking was brought up, and the opinion of the engineers present was that dynamic braking was not a desirable feature except where heavy, long, adverse grade is encountered. Mr. Goddard and Mr. Bright had a spirited discussion regarding ball bearings, bringing out the opinion of the meeting that ball bearings in motors are preferable to sleeve bearings, and the few failures so far encountered are due to improper application or insufficient size of bearing. Mr. Shubart brought up the question of locomotive speed, mentioning some high speed work on main haulage, also an interesting experiment in a large Eastern mine where very slow speed, 3 1/2 miles per hour, gathering locomotives were substituted for the high speed gathering locomotives with an increase in cars gathered and a material decrease in derailment and accident. Mr. Bright mentioned the improvement in gathering reels, and Mr. Shubart mentioned the safety in the use of the concentric cable in direct current, using the outer wire as the ground wire, so that in case of accident to the cable, the ground wire acted as a protector to the live wire, materially decreasing the danger of sparking. Mr. H. I. Smith of the Bureau of Mines brought up the question of explosion proof construction, and Mr.. Bright and. Mr. Shubart explained the construction adopted by two of the larger manufacturers. Experiment has shown that the force of explosion in motors due to gas does not exceed 150 pounds per square inch. All forms of screen or baffles have proven an actual source of danger, due to the collection of dust, usually soaked in oil, forming an active means of propagating flame, together with the fact that all these appendages are frequently left off when the motors are repaired. Modern construction eliminates all openings, screens, devices for stopping or extinguishing flame. The motor is made entirely enclosed, practically air tight, all joints are ground and all openings necessary for access and attention are closed by bolted plates. The case is made stout enough to withstand any interior explosions, and ample ribbing is provided for heat dissipation. Mr. Bright was asked regarding the use of contactor control. He replied that his company is now recommending contactor controls for series and parallel starting on all locomotives of 13 tons and over, and particularly on the tandem units that are now becoming popular in coal mining work. The question of dynamic braking and reversing was brought up and Mr. Bright explained that this made a very complicated contactor installation but they had

Jan 1, 1922

By John M. Jennings

The Hiawatha pitmouth is located at the head of the middle fork of Miller creek, at an altitude of approximately 8,100 feet. The coal is lowered to the tipple down a gravity tram two miles long, in 16 car trips which carry about 60 tons net. The average running time of the trip is about nine minutes. At the bottom of the tram there are two tracks for the loads and two for the empties. The trip, after being cut off the rope, is dropped by gravity onto a feeder, where the cars are uncoupled and fed one at a. time across the pitcar scales and into the dump. The dump is of the full revolution type, friction driven. On passing out of the dump the cars are returned by a kickback onto the empty car haul. They are caught at the bottom by a brake which consists of a pair of steel squeeze blocks operated by heavy springs. The empties are elevated to the double tracks, where the trips are made up. The feeder, scales, dump and empty car haul are all built on the solid ground of the hillside instead of being incorporated in one structure with the screening plant. The coal is dumped into a small hopper with a capacity of about 15 tons, whence it is fed by a reciprocating feeder onto a scraper conveyor which takes the coal over to the screening plant, a distance of 120 feet. This conveyor is 48 inches wide and travels at 120 feet per minute. The screen itself is interesting. It is of the Marcus Horizontal type.

Jan 1, 1925

To be held in Denver Probably in June. The correct dates will be announced later IF you have any suggestions for the program, send them to the Secretary without delay.

Jan 1, 1942

Salt Lake City will hold the Winter Meeting the last week in February or the first week in March. An unusually good program, both technical and social, is being arranged.

Jan 1, 1928

RMCMl PRESIDENT CHARLES W. MARGOLF on behalf of The RMCMI Board of Directors and Officers invites you and your family to attend The 81st Regular Meeting and Convention of The Rocky Mountain Coal Mining Institute to be held at Tamarron, Durango, Colorado JUNE 30, JULY 1 AND 2, 1985

Jan 1, 1984

The 1942 meeting will be held in Salt Lake City, June 10,11, and 12, at the Hotel Utah. ... If you have any suggestions for the program, send them to the Secretary at once.

Jan 1, 1941

[ ]

Jan 1, 1995

of our good friends and fellow members: James Dalrymple, Sr. R. M. Perry A. E. Oliver R. M. Harding C. L. Oliver Arthur S. White Arthur N. Fancher A. E. Lindrooth D. A. Stout Clayton Morrison Frank O'Ryan Charles Billington who left the world better for their having lived in it.

Jan 1, 1935

[Participating Scholarship Colleges and Universities 148 Andalex Resources, Inc 99 Big Sky Coal Company 118 Canyon Fuel Company, LLC 100 Coal Age 141 Commercial Testing & Engineering Company 103 Continental Conveyor & Equipment Co 104 Copper Mountain Resort 139 Cove Shoe Co., Inc 116, 117 Dakota Coal Company 105]

Jan 1, 2000

Thomas J. LIEN RMCMI PRESIDENT 1997-1998 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 94TH Regular Meeting and Convention to be held June 27 thru June 29, 1998 Snowmass Village, Colorado

Jan 1, 1997

The morning session opened at 9:00 a.m. and was presided over by Harold Levent., Manager Coal Activities, Cameron Engineers, Denver, Colorado. The first speaker was Dr. Joseph J. Yancik, Assistant Director-Mining, Bureau of Mines, U.S. Department of the Interior, Washington. D.C. Subject-"Coal Mining R&D Programs of the Bureau of Mines." (See index for printed text of Dr. Yancik's paper.) Joseph J. Yancik is Assistant Director - Mining for the Bureau of Mines, U.S. Department of the Interior, Washington, D.C. He is responsible for the Bureau's research programs in mining. Principal programs are the coal and metal mining health and safety research, mining extraction and excavation, tunnelling, explosives, mined land reclamation, mine fires and mine waste disposal. He administers these programs through four research centers and through outside contracts and grants.

Jan 1, 1974

Preceding the regular meeting, "Harvest from the Sky" was shown, an action-packed movie demonstrating how man and machines provide Denver with water. This vividly colored picture illustrated the magnitude of the job, highlighting the construction scenes at the 23-mile Harold D. Roberts tunnel, many scenes of which were taken underground at the face. Presiding was Mr. John Peperakis, Alanager, Sunnyside Operations, Kaiser Steel Corporation, Sunnyside, Utah, who called the regular meeting to order at 9:30. Mr. Peperakis introduced Mr. Otto A. Wiesley, Chairman, Industrial Commission and Utah Labor Relations Board, Salt Lake City, Utah, who spoke on "Functions and Policies of the Industrial Commission of the State of Utah." It was with obvious pride that he discussed the Medical Panel in use and the successful operation of the Indus- trial Commission in Utah, stressing the fact that the most important word in their vocabulary was "cooperation." (The text of his address appears later in these proceedings; see index for page number.)

Jan 1, 1959

The Fortieth Regular Meeting of the Rocky Mountain Coal Mining Institute was called to order in the Hotel Utah, Salt Lake City, Utah, Wednesday, June 10, 1942, at 11:30 a.m., by President, Wetzel, who presented Mr. William A. Fealey who, in turn, introduced Mr. Bracken Lee, Mayor of Price, Utah, who made the address of welcome. President Wetzel then made a few remarks. The Secretary announced with regret that, due to the critical illness of Mr. Sidney Hale, he would be unable to at- tend the meeting. On motion of Charles M. Schloss, duly seconded and carried, the reading of the minutes of the Thirty-ninth Regular Meeting was dispensed with. Mr. Schloss also moved that the Chair appoint the usual committees, which motion was seconded and carried. President Wetzel then announced that the committees would be appointed during the afternoon session. Following routine announcements, the meeting recessed at 12 o'clock noon to reconvene at 1:30 p.m.

Jan 1, 1942

MINUTES OF MEETING, AUGUST 27, 1923. Meeting called to order at 10:00 a. m, by the President, George B. Pryde. In the opening remarks Mr. Pryde commented on the Kemmerer disaster, making the work of the Institute particularly important, the desirability of using a more up-to-date emblem for the Institute, the formation of local chapters. The minutes of previous meeting were presented by the Secretary in connection with our publication. Announcements were made regarding the program. Under reports of officers, no reports were made. No reports of standing committees. Report of Special Safety Committee was postponed for a full session, August 28th. There was no further business. Under the head of new business, the following names were proposed and accepted for membership: J. P. Russell, Salt Lake City, Utah, W. A. LaPierre, Salt Lake City, Utah, G. A. Schultz, Latuda, Utah, W. A. Seyffert, Salt Lake City, Utah, P. C. Bunning, Rock Springs, Wyoming, F. L. Gates, Superior, Wyoming, F. C. Miller, Trinidad, Colorado, G. B. Parker, Trinidad, Colorado, Robert Williams, Jr., Somerset, Colorado, F. L. McCarty, Rock Springs, Wyoming,

Jan 1, 1923

The morning session opened at 9:00 a.m. and was presided over by Mr. George A. Nugent, Manager Mining Division, Peter Kiewit Sons' Company, Sheridan, Wyoming. The first speaker was Mr. Jack Huebler, Vice President Research, Institute of Gas Technology, Chicago, Illinois. Mr. Huebler joined IGT in 1961 as Director of IGT's contract research program, a major part of which is IGT's extensive coal gasification work. He is also an adjunct associate professor at Illinois Institute of Technology, teaching gas utilization. Before joining IGT, Mr. Huebler spent 20 years with Surface Combustion Corporation where he was chief research engineer. He developed, designed, and constructed a wide variety of heat processing equipment and the associated chemical processes and was involved in applied research in heat treating, gas chemistry, and gas-solids reactions. He has carried out extensive research on the heat treating of ferrous metals, oil gasification and gas combustion, and has made major contributions to the development, construction, and operation of large-scale industrial furnace equipment. He received B.S. degrees in 10th chemical engineering and mathematics from the University of Michigan in 1941. He has 60 publications including 15 patents. He is also a world traveler in the field of engineering. Mr. Huebler's subject "Gasification of Western Coals." (See Index for printed text of Mr. Huebler's paper.)

Jan 1, 1972

Mr. Geo. B. Pryde, Chairman; Committee on Safety, Rocky Mountain Coal Mining Institute, Rock Springs, Wyoming. Dear Mr. Pryde: In accordance with suggestion in your letter to me of June 21, 1923, Mr. Roberts, Mr. Dalrymple and I had a meeting and attached find our contribution to the proposed August report of the Committee on Safety. You will note that we have confined ourselves to matters in connection with explosions and prevention of explosions, in coal mines. If the committee is to report on general safety in coal mines, including accidents from haulage, timbering, rock falls, electricity, etc., we would like to suggest that you ask other members of the committee to specialize on one or more of these subjects. Especially we believe it would be advisable to specialize as to precautions against electrical accidents with giving of data as to maximum voltage, precautions to be taken as to gas ignitions by mining machines at faces, best methods of placing power wires underground, etc.; also give information as to up-to-date safety installations, such as whistle devices notifying of disarrangement of ventilation or devices for quick cutting off of electrical power from mines under certain conditions; also give data as to efficient safety man cars on various pitches, etc. Yours truly, D. HARRINGTON.

Jan 1, 1923