Search Documents

By Kenneth C. G. Heath

The paper point out the economics importance of the Torco process as lubricant and fuels of the motor in the mining. It is possible to envisage an arrangement in which TORCO would be used to treat a sulphide ore, the acid used to dissolve the metallic ccoper in the concentrate and the copper produced in cathode form by electrowinning. However, there are studies point out that it would be as profitable as conventional flotation, smelting and refining. To carry out full testing of the TORCO process on anyore would be expensive, involving sending several hundred tons to one of the pilot plants located in Johann esburg or Milan. Such pilot plant testing should & be considered as confirmatory rather than exploratory, and a good economic case for using theTORCO process would have to be made out based of mallet scale testing before in curring the larger expense.

Nov 20, 1969

By Alexander Seyfarth

X-ray systems for elemental and phase determination have become more expensive and easier to use. In this sense, although the new systems offer more functions in the software for matrix correction, preconfigured optimized measurement parameters as well as wizards for method development, they will not perform for the applications if not used with the right sample preparation technique. Experience in this sector is not widely shared since it is a more empirical trial and error approach unique to the sample preparation equipment used. This paper outlined 3 case studies, where the sample preparation was crucial in the adaptation of the X-ray technique and it also illustrated that an analytical solution is not complete without the sample preparation, which ultimately governs the accuracy of reference materials and unknowns used. Comparing the necessary sample for XRF with the one used for ICP analysis clearly shows the time and cost savings.

Jul 31, 2003

By Pabel Alvarado

Mineral deposits with large data uses different block dimensions in Long term planning (LTP), short term planning (STP), and ore control (OC). Using applications can Re-block, Krige, Compute variable, Compute Route, etc. necessary block models with multiple dimensions can be created. For instance, disseminated deposits require granular ore control block model because mineralization can be unpredictable. Then different block size must be created for the ore control activity and different block size must be shaped individually in LTP, STP, and OC.

Sep 1, 2017

By Alfred Goldberg

The paper is founded on the results of an investigation on the softening behavior of a cold-rolled low carbon steel. This specimen, originally cold rolled 15 , 30 , 50 and 75% reduction in thickness, were annealed at several temperatures ranging from 481 to 687ªC. A temperature-time range was encountered over which strong competition between these processes was evident. An interpretation on the effect of test variable on determining which one of the competing processes dominated during annealing is presented.

Jul 20, 1961

By James R. Kunkel

Water management at a mine site is a critical component for the design of ponds for mine facility operation and mine facility closure. A comparison of pond sizes designed using both a probabilistic and deterministic dynamic water balance model is made. In this sense, the paper point out the probabilistic design of mine-site ponds using a dynamic water management model. The two models both have the capability of using actual operational data and climate inputs to give storage requirements of the ponds Both short-term (60 days) and longterm (many years) designs incorporating a user-selected storm event and a probabilistic or deterministic analysis may be utilized for calculating storage volumes for various mine facilities. Based on these, operational decisions based on actual values or probabilities over time can be made.

Sep 14, 2009

By Xuejing Xie

Exploration geochemistry for many years has been very effective in searching for mineral deposits covered by residual overburden or blind ore bodies hosted in pre-ore rocks. It has not been as effective discovering ore bodies deeply concealed under various kinds of transported overburden or post-ore sedimentary and volcanic rocks. From the 1980s to 1990s, various types of new geochemical techniques with the ability of deep-penetration through exotic covers have been developed. The concepts and methodology of deeppenetrating geochemistry are evolving from partial extraction and gas surveys prevailing from the 1950s up to now, but there are intrinsic differences. Most of the new deep-penetrating methods are used in detailed surveys to delineate deeply concealed ore bodies which could not be ascertained by conventional geological, geophysical and geochemical surveys. In this sense, the sampling and analytical methods of Nameg and Momeo are described briefly. Experiments of such strategic deep-penetrating geochemical surveys have been carried out in desert, alluvium, steppe and laterite covered terrains in China, Australia and Uzbekstan.

Apr 24, 2001

By N. Mendoza, B. Nohtani

Kalegar Project is a copper porphyry system with gold-copper structures. The system is located in southeastern Iran, about 170Km NW of Zahedan city, capital of Sistan and Baluchistan Province. The Project is near the highly deformed and tectonized Lut Block and flysch zone. This type of mineralization is related to regional tensional structures and a pull apart basin. Hydrothermal alteration extends (4.5km x 1km), with an EW tendency. The alteration is predominantly moderate silica-clay with restricted silica pyrophyllite alteration and it is related to ‘B’ banded quartz veinlets. These alterations occur in a dacitic unit, heterolithic breccia sequences and early porphyritic andesite. It may be related to a postulated productive porphyry system at depth.

May 1, 2008

By John. A. Lombardi

Membrane technology for mining applications has gone beyond producing high-quality water from well- and sea-water by pushing forward with process water treatments to recover and concentrate metals, reagents and clean, discharge-quality waters. Therefore, the main objective of this work is is presenting state-of-the-art process alternatives using membrane technology to face four treatment issues common in the copper, gold and in general all the mining industry regarding process waters and streams that offer treatment challenges to the metallurgical and process engineers.

Sep 14, 2009

By Luz Marina Acharte L., Luis Quispealaya A., Enriquez Donaires A., Daniel Lovera D.

La presente investigación modela los impactos de los polvos de perforación en frentes mineros empleando una metodología integral: producción, ambiental, seguridad y salud ocupacional en la pequeña minería Cambalache ubicado en la Provincia de Angaraes, Departamento de Huancavelica a una altura de 3,250 m.s.n.m, que realiza actividades de explotación subterránea de minerales polimetálicos (Ag, Pb, Zn , Fe y Cu), con un análisis mineralógico de la roca: Magnetita ( tamaños hasta de 0,775 mm), Hematita (0,250 mm), Ilmenita (0,250 mm), Rutilo ( 0,175 mm), Leucoxeno ( 0,185 mm de longitud), Pirita ( 0,045 mm), Calcopirita ( 0,055 mm ) y Goethita.

Sep 1, 2017

By Michael Klug

"In the past the optical sorting in the mining sector has not enjoyed an outstanding and very celebrated position in the industry because of insufficient computer–, sensor– and valve-technologies. Due to the fast development processes in the last years, companies nowadays can offer a high efficient system to the industry. Sensor based sorting is already an outstanding and proven technique and has become an important alternative to either extensive process steps or the widely spread handpicking.The increasing costs for the latter results in manual sorting of more coarse material. "

Sep 1, 2017

By J. Arango Gonzales, J. Vela Portilla

Este estudio se basa en un probable nuevo descubrimiento de un yacimiento de Au, en las rocas del volcánico Llallahui (Grupo Tacaza – Terciario Medio a Superior), que podría estar ligado a la ocurrencia de yacimientos epitermales de Au del sur del Perú. Se trata de un yacimiento epitermal de baja sulfuración, emplazado en autobrechas y tobas donde mediente los análisis químicos de los muestreos realizados se dete rminó valores de leyes en Au 0,10g/TM a 0,81g/TM, estimandose recursos inferidos de 70MT @0,10-0,80 g/t de Au, lo cual convierten en un prospecto de gran potencial.

Sep 1, 2017

By Gordon I. McPhail

Future challenges to the mining industry are many and include increasing requirements from regulatory agencies and communities, more competitive commodity pricing, increasing competition for power and water supplies, deeper mines and increasing number sulfide ore bodies requiring dealing with Acid Rock Drainage (ARD) controls and finally larger mine waste structures increasing consequences of potential failures. In this sense, the paper deals with approaches that can, and have been, used in planning the overall project and tailings facilities locations and layouts. It also discusses approaches used to achieve better planning, by considering an integrated milling, concentration, and tailings process, rather than considering tailings and the Tailings Storage Facility (TSF) as an independent entity.

Oct 21, 2015

By Aigen Zhao

This paper describes the geocomposite manufactured with a special HDPE geonet and heat-laminating a polypropylene geotextile to one or both sides of the geonet. Also the text presents the design and result analyses of large-scale field test pad with the geocomposite overliner system, compared side by side to a control pad with a conventional gravel and pipe drainage system.

Oct 21, 2015

By M. I. Freeman

This paper point put if the companies will considerate large- scale mining in South Américan in the future. In this sense, the philosophy of an international mining company means that the company and the country working in the partnership and they can convince the outside world of the creditworthiness of the project. The mining company would be considering the account metal requirement in the future, the code of behaviour, the obligations and the rights among the employees, the shareholders, the customers, and to the State in wich its work. However, is not specially tailored philosophy for South America. The most important is the satisfactory agreement can be reached even with governments whose domestic laws preclude equity participation by the mining company.

Nov 20, 1969

By Michael Leslie Connor

The paper point out the services of the london metal exchanged on the mining.The investigation is divided at two parts: the tradings sessions and dealing and delivery dates. As well as, the london metal exchanged serves the world metal trade at large in three ways: a daily market price, a physical market and the insurance against market fluctuations.

Nov 20, 1969

By Gabriel Castillo

The global warming and the associated changes in climate variability would increase the risk to the mining industry in both magnitude and frequency. Consequently, extreme climate conditions would disturb the infrastructure, equipment and mine closure strategies in areas that have not consider this potential impact. To cope with these climate-associated risks is critical to understand the exposure and vulnerability with a local perspective. Having a clear knowledge of the current climate risks, the vulnerability of species, ecosystems, and ecological processes in the watershed where the mining operations are is essential to inform how patterns of risks and potential benefits are shifting due to climate change.

Sep 29, 2023

By Robert Griesbach

One of the important decisions in the development of new mining concentrator projects is the electric power supply for the project. Key decision factors often include the production of power on site versus purchase of power from the grid, ownership of the power supply infrastructure and the choice of generation technology. In this sense, the paper introduce a methodology that will allow the evaluation of the various alternatives to supply electric power to remote mining and mineral processing sites in a consistent and equitable manner taking into account economic and technical considerations and providing the same degree of availability and reliability. The most employed evaluation method consists of carrying out trade-off studies between the various alternatives but care should be exercised so that the alternatives analyzed offer comparable operational results.

Sep 14, 2009

By V. E. McKelvey

The paper point out the importance of the knowing about the role of minerals in economic development throght the energy and of many of the materials that make it possible for tre industrial society to obtein a high level of living. They yield their greatest benefit througth constructive use but produced as raw materials for export they can be a valuable means for forming capital for country development and of obtaining foreign exchange for the purchase of manufactured goods and others necessary imports. Likewise the export industries are to make their fullest contribution to economic development and the capital formed us rbe reinvested localy to if stimulate development of other industries and of industrialized agriculture.

Nov 20, 1969

By B. Whistler

The Alpala porphyry copper-gold deposit is a recent discovery located in the Imbabura Province of northwestern Ecuador. The drilling of seventeen diamond core holes over a 900 m by 400 m area has defined a northwesterly-trending, steeply northeast-dipping dike-stock complex of diorite to quartz diorite that exceeds 1300 m in height. This intrusive complex is hosted by a sequence of andesitic volcaniclastic rocks and lavas. The host-rocks are interpreted to be part of the Paleocene to Late Eocene Macuchi Formation (BGS-CODIGEM, 1997; Cruz, 2007). The best drill intercept to date is 1312 m at 0.67 % Cu and 0.63 g/t Au from 128 m depth in CSD-15-012, which includes 576 m at 1.03 % Cu and 1.19 g/t Au.

May 1, 2008

By Józef Hansel

The paper point out that shaft hoists operated in Polish mines represent the average wolrd standard. In this sense, transport of mining personnel and mined material from increased depths causes no major problems, the number of hoists of considerable loading capacity still increases despite the increase in the shaft depth; the output per one mine hoist has grown considerably and high safety standards in personnel transport are provided (in the last 10 years no life was lost during personnel transport).

Sep 13, 2001