Search Documents

By G. I. Gritsko

In this paper we consider the elements of a distributed information geomechanic monitoring system which is used in computerized mine planning and mining operations control. The automated system is a technical means of geomechanic monitoring, as a complex system of regulated observations, estimation and prediction of geomechanic state of rock mass and workings during underground mining of coal deposits. Geomechanic monitoring at coal mines and the automated system execute data collection, analysis and calculations of geomechanic situation in the panel during planning, development and carrying-out of mining operations for ensuring geotechnical stability of underground mining.

Jan 1, 1996

By Sydney H. Ball

It is a peculiar anomaly that while the world uses the term "rich as a gold mine" as the superlative figure of speech descriptive of wealth, the shares of gold mines are not as popular investments in America as certain of them should be. One of the most able of Manhattan's bankers is a director in an investment trust with a portfolio the value of which has gone the way of other such portfolios. Luckily a couple of years ago a few hundred shares of Homestake were purchased, and since then the trust has not only received therefrom satisfactory dividends but has benefitted from a large appreciation in their value. At each directors' meeting, however, the banker in question, Cato-like, suggests the sale of these shares, gold shares being, in his opinion, too speculative to be included in the portfolio of any trust. A short time ago the financial pages of one of our great metropolitan papers featured an article listing the corporations still paying dividends at the 1929 rate. Gold-mining shares were, the article stated, excluded, although in reality every gold mine on the New York Stock Exchange paid higher dividends in 1932 than in 1929. This 'Alice in Wonderland' treatment of the gold-mining shares is admittedly a bit confusing to those of us who believe that the shares of certain gold-mining companies have a rightful place in any well diversified portfolio. It should, however, here be recorded that whereas, fifty years ago, in America, gold-mining shares were considered by the public as instruments of nefarious gambling, now shares of the better gold mines are sought by astute investors. In England for well over a generation their value as sound investments has been widely recognized.

Jan 1, 1933

By K. T. Menzies

Over 1500 literature citations related to diesel exhaust sampling and analysis were obtained as a result of both computer and manual searches of nine data bases. Abstracts and hard copies of relevant citations were reviewed and those considered appropriate for evaluation were included in a bibliography. Based on the literature collected, available sampling and analysis methods for the following diesel exhaust contaminants were evaluated: CO, CO2, NO, NO2, Hydrocarbons, Particulates, PNA, S04, Oxygenates Emphasis was given to both laboratory and field methods for these species. Methods were evaluated on the basis of sensitivity, selectivity, accuracy and reliability and a selected list of preferred methods was developed for each compound/ class. The selected methods were additionally evaluated through communication with current investigators. Sampling and analysis methods for all compounds except CO and CO2 were observed to have some unreliability. Recommendations were made for future research to develop, improve, and validate methods.

Jan 1, 1979

By Donald Carlisle

El presente texto revisa los costos, utilidades, cantidades y velocidades de "recuperación" en el empleo de la mena. La mena debe ser explotaba con beneficio -en tanto se trabajan las minas para obtener de ellas un beneficio. Cuando un geológo trata de aplicar la definición citada a una situación concreta, ya no hay simplicidad. Para ello, es necesario explicar cómo se fija la ley marginal, la máxima profundidad de minado, la recuperación porcentual óptima y otros márgenes similares cuando no hay procedimientos rutinarios establecidos. Sobre esta base se calcula la utilidad diaria, tonelada, o total del yacirniento y si este implica una ganancia mínima o no.

Mar 1, 1959

By Faruk Oksuz, Phillip L. Covell, Martin Doll

A series of difficult ground conditions causing high groundwater inflows and hazardous gas intrusion abruptly halted the construction of a 6.4-meter (21-foot) finished diameter and 1,890 meters (6,200 feet) long tunnel planned to serve as a 4-millioncubic meters (1-billion gallon) per day capacity river outfall for treated wastewater. Some 808-meters (2,650-feet) section of the constructed tunnel, TBM, and all other tunneling equipment were completely flooded with hydrogen sulfide laden artesian groundwater. The subsequent pumping and tunnel recovery efforts were unsuccessful and the tunnel was abandoned. In the end, the construction contract was terminated and options to redesign and reconstruct the project were re-evaluated to maximize the use of already constructed tunnel facilities such as the construction access and inter-mediate shafts and six outfall diffuser shafts in the river.

Jan 1, 2007

By Bruce I. Thomas

[THIS PAPER, tine of a series on placer ml n in iii Alaska, describes mining methods and gives unit costs at operations where hydraulic and mechanical excavation equipment is used with nonfloating washing plants. The mining methods described were developed during the last 30 years to copy with conditions peculiar to arctic and subarctic regions arid are now used by a large segment of the placer mining industry in Alaska. The operations described have been classified if m ii into three main categories: Those having sluices at a bedrock level, those having sluices above bedrock and those having mobile nonfloating washing plants (dryland dredges). Diesel-powered bulldozers and draglines convey or clevate gold-bearing gravel to the sluices, remove tailings, and strip waste gravel and other overburden. Diesel-powered centrifugal pumps supply water foe sluicing and hydraulic stripping. Detailed descriptions and unit cost arc presented for 14 operations to illustrate the numerous arrangements udder the first 2 categories.]

Jan 1, 1959

By William R. Barton

COLUMBIUM (niobium) and tantalum are similar refractory metals with closely related properties and uses and close association in ore deposits. Until recently both metals, particularly columbium, were essentially laboratory curiosities. However, since the beginning of World War II, applied technology, under the impetus of national security requirements, has realized many chemical, electronic, nucleonic, and missile and rocketry applications, where high temperature or corrosive environments require the use of columbium or tantalum. At the same time, advances in these fields have resulted in intensive research on the geological distribution, resources, metallurgy, and properties of these two metals; their alloys and compounds; and the development of a full-fledged columbium-tantalum industry. The future appears to promise continued acceleration in such studies and ever-increasing demand for these elements. The raw material supplies of columbium are abundant, and the extractive metallurgy of columbium is well enough advanced to assure adequate supplies of the element at reasonable prices to meet any projected demands. Although the extractive metallurgy of tantalum is similarly well developed, raw material supplies are so limited that, lacking new ore discoveries, an increase in demand to five times the 1959 level would severely tax ore-production facilities. Approximately 120 tons of tantalum and about one-half as much columbium was produced in 1959. Additional quantities are consumed as compounds or additive alloys such as ferrocolumbium and ferrotantalum columbium (55).3

Jan 1, 1962

By Mel Febesh

Working in New York City has become the graveyard of many Foundation Contractors. Varying subsurface conditions require Foundation Contractors to be aware of the conditions at each particular site and have the knowledge and equipment to successfully complete the project. Looking back, we can see that many of the methods and much of the equipment that were commonly used in the past have been replaced with newer methods and equipment, but sometimes the old methods prove to be the most reliable. This paper will describe examples of varying conditions and construction methods in sites that are close to each other. It will also show different construction problems that are encountered when working adjacent to existing subway structures, when excavating below the foundations of adjacent structures and when ground water is encountered.

Jan 1, 2000

By Mark S. Sanders

This report is a review and synthesis of the published literature dealing with personal equipment items used by low seam coal miners. This report reviews the following items of equipment: headgear, outer garments, respirators, cap lamp, gloves, knee pads, footwear, boots, helmets, ear protection, eye protection. Recommendations for further research and development are included.

Jan 1, 1978

By Américo Zuzunaga Cardich

La voladura de rocas es la operación minera más importante de la producción minera, dado que provee materiales de calidad para el equipo de carguío, transporte y conminución. En este sentido, el presente texto señala el método temporal alternativo para el diseño de malla y carga de la voladura en la mina Cuajone. El diseño de la malla se realizó considerando los parámetros geotécnicos del explosivo y del equipo de perforación, mientras que para el cálculo de carga se utiliza el criterio de "velocidad pico de partícula" que originalmente fue desarrollado para el control de daños a estructuras por efectos de la vibración derivado por la voladura. Finalmente, para minimizar el daño ocasionado a la pared del banco a ser minado, la ejecución debe efectuarse a través de métodos de voladura controlada a través del equipo empleado en voladura de producción normal.

Nov 24, 1986

By V. Barúa

El presente estudio revisa el panorama historiográfico sobre las etapas del minado de tajo abierto desde el pasado, presente hasta el futuro. En el pasado, la minera superficial a tajo abierto surgió para obtener principalmente materiales no metálicos de construcción, alcanzando su auge a partir de las últimas décadas del siglo pasado. Sin embargo, existieron algunos obstáculos en el desarrollo de su mecanización y tecnología que posteriormente fueron mejoradas. Posteriormente, existe una competencia por desarrollar equipos mecánicos de mayor capacidad y operación, como un interés por el advenimiento de nuevas tecnologías y uso de la investigación. Finalmente, el panorama sobre el futuro del minado a cielo abierto, presenta condiciones en las que no se asume nuevos progresos mecánicos ni mayores espectativas que en el pasado.

Nov 20, 1972

By Carlos Virrueta

"El presente texto señala la importancia del comportamiento seguro en el sistema de riesgos aplicados al comportamiento de los trabajadores, salud y medio ambiente para así establecer los lineamientos yresponsabilidades requeridos para realizar el programa de Auditorías de Comportamiento Seguro, fortalecer el compromiso visible de liderazgo de los equipos de trabajo, así como crear y fortalecer en las personas el hábito de la prevención de los riesgos."

Oct 21, 2015

By D. A. Bruce

The Deep Mixing Method is a very valuable tool for combating problems related to in situ soil treatment, improvement, and retention. Many different variations are used throughout the world, and there is a correspondingly rich technical literature on the testing and properties of the treated soil. This paper provides a synopsis of these aspects.

Jan 1, 2001

By Paulo Henrique da Silva Gomes

A melhoria contínua dos processos é fator fundamental para o sucesso do negócio. Avaliar as melhores práticas e propor soluções que equilibrem os custos e o uso consciente dos recursos naturais transformará o negócio sustentável e sólido. Com esse ideal, foi realizado um estudo de viabilidade econômico-financeira e operacional para a implantação de um novo modelo de peação (fixação) de cargas conteinerizadas com produtos siderúrgicos (bobinas de aço) da CSN movimentados pelo Sepetiba Tecon - Porto de Itaguaí - RJ. O processo de peação de bobinas era basicamente realizado utilizando-se de madeiras fumigadas para a fixação das bobinas dentro do contêiner. O estudo objetivou a implantação de um processo de peação utilizando cintas de poliéster, reduzindo o uso de madeira, proporcionando maior segurança pessoal e agilidade nas operações. Além disto, propôs também a utilização de um implemento para acomodações das bobinas dentro do contêiner que pode ser operado por uma empilhadeira de menor capacidade, reduzindo assim a emissão de gases poluentes e o consumo de combustíveis fósseis.

Jul 29, 2018

By Susana Marraccini Giampietri Lebrão, Jorge Alberto Soares Tenório, Renato Souza e Silva, Guilherme Wolf Lebrão, Viviane Tavares de Moraes

Os resíduos eletroeletrônicos podem ser compostos por equipamentos ou parte deles, que se tornaram obsoletos, pararam de funcionar ou ainda por apresentar defeitos durante a sua produção. As placas de circuito impresso (PCIs) são peças presentes em equipamentos eletroeletrônicos compostos por materiais metálicos, cerâmicos e poliméricos. Para alguns destes metais já existem processos para recuperação, contudo estes processos baseiam-se em técnicas pirometalúrgicas que podem liberar substâncias tóxicas. A fim de minimizar os impactos ambientais propõe-se o beneficiamento das PCIs através de rota hidrometalúrgica para a obtenção de cobre em solução e, posteriormente fazer a redução do cobre. Para tanto se fez a moagem das PCIs, seguida de caracterização química. Partiu-se para rota hidrometalúrgica em meio ácido e em meio oxidante. A solução resultante de cobre foi reduzida para cobre metálico por reação de redução com ácido ascórbico. Os resultados apresentam recuperação de 97 % de cobre das PCIs com obtenção de cobre metálico.

Oct 11, 2019

By H. J. Sutherland

This paper reviews the results of the subsidence research prop ram at Sandia National Laboratories. The manuscript highlights the following: the application of empirical methods (profile functions) to the subsidence above longwall panels in the U.S.; the use of the "rubble model" to describe the behavior of broken strata as it distends when it falls to the Mine floor (or top of the rubble pile) and then is subsequently compacted as it is loaded by overlying elements of strata; and, the application of physical modeling techniques (centrifuge simulations) and numerical techniques to study the failure mechanisms in highly structured stratigraphy. The capabilities of the latter two are illustrated ')y comparing their predictions to the results of a field case that has complicated stratigraphy.

Jan 1, 1982

By Claude MacDonald, John H. Ashburn

"IntroductionIndustrial growth and technological change over recent years had been accompanied by two major sources of concern to management and employees: (a) increase in occupational injury and illness and the resultant costs involved; and (b) equipment damage and breakdowns in concentrated production lines causing more extensive loss potential.Due to economic factors, management attention has focussed more on production and quality than on safety, health and related loss potential sources. As a result , occupational safety and health activism has grown, government legislation of compensation and occupational safety and health standards have progressively developed and stronger liability attitudes have been taken by courts of law.To improve efficiency and allow development in more competitive markets, rising labour costs, equipment costs and safety related financial losses have dictated that attention be given to conservation of all resources. Conservation of resources, people, equipment, material and environment, can no longer be addressed in isolation but must be managed integrally with production and quality. To this end, systems have developed utilizing sound management principles applied with equal intensity to production, quality and loss potential"

Jan 1, 1987

By Aline Silva Magalhães

Os aços rápidos são assim chamados por sua capacidade de reter elevadas durezas mesmo quando submetidos a altas temperaturas, em geral decorrentes de elevadas velocidades de corte no processo de usinagem. No entanto, para que esses aços apresentem as propriedades mencionadas, faz-se necessária a combinação adequada da composição química e dos parâmetros dos tratamentos térmicos. Dentro deste contexto, o objetivo do trabalho é avaliar os efeitos da temperatura de austenitização e do tempo de encharque na têmpera na microestrutura e na dureza do aço rápido AISI M2, ligado ao tungstênio e ao molibdênio. As análises foram conduzidas através de testes de dureza e microscopias óptica e eletrônica de varredura, além de difração por raios-x, considerando três temperaturas e três tempos de austenitização. Foi observado que, de maneira geral, os valores de dureza aumentaram com a elevação da temperatura de austenitização para os três diferentes tempos de encharque utilizados, de forma concomitante com a redução na quantidade de carbonetos dispersos na matriz martensítica.

Aug 8, 2018

By Mariana Hellen de Freitas Fonseca

Os produtos feitos de ferro puro contendo Ni expandiram enormemente as aplicações de produtos sinterizados, incluindo a fabricação de peças que suportam altas cargas em automóveis tais como transmissões. Deste modo, este trabalho pretende contribuir com um estudo direcionado à identificação de fases em ligas Fe- Ni-Mo sinterizadas a temperatura de 1.100°C e processadas por moagem de alta energia (MAE), buscando relacionar a variação do percentual do molibdênio (0%, 1% e 2%) e a respectiva dureza da liga sinterizada. O estudo demonstrará as fases presentes pela técnica de difração por raios X (DRX) e o perfil de dureza obtidos após a sinterização. Os resultados mostraram a presença de uma fase estável a (CCC ferrita) e uma fase meta-estável ? (CFC Austenita) com formação de solução sólida de molibdênio na ferrita. O perfil de dureza mostrou que existe uma relação linear entre o % de Mo e a dureza das ligas para os valores utilizados neste estudo.

Aug 16, 2017

By Ariella Vianna Fontes

Os dutos de plástico reforçados com fibra de vidro, devido a sua boa relação entre resistência mecânica, peso e resistência à corrosão, são amplamente utilizados, por exemplo, na indústria petrolífera. Todavia as conexões de vários trechos desses dutos, realizadas por juntas adesivas, podem apresentar defeitos como a falta de adesão e a falta de adesivo, tornando-se pontos propícios ao colapso. Até o momento ainda não há uma metodologia de ensaio não destrutivo consolidada, capaz de avaliar a integridade das juntas adesivas. A técnica mais utilizada é o ensaio de ultrassom, porém com fortes limitações. Dentro desse contexto, o presente trabalho apresenta a caracterização dos defeitos utilizando a técnica de microtomografia 3D, visto que esta permite examinar a estrutura interna do material. Foram confeccionados e avaliados corpos de provas contendo os defeitos típicos encontrados em campo. Os resultados mostraram que a técnica utilizada é adequada para caracterização qualitativa e quantitativa dos defeitos típicos em juntas adesivas encontrados em campo.

Aug 16, 2017