Search Documents

The twenty-eighth regular meeting of the Rocky Mountain Coal Mining Institute, which was held jointly with the Utah Section of the American Institute of Mining and Metallurgical Engineers, was called to order at eleven o'clock A. M., Monday, March 11, 1929, President Otto Herres presiding. Introductory remarks were made by John M. Boutwell, Chairman of the Utah Section of the American Institute of Mining and Metallurgical Engineers, who outlined the intent and purpose of the joint meeting, and its co-operative program. He spoke of the in- creased recognition being given to men in the engineering profession by the public, which has recently been manifested by the election of President Hoover, an engineer of outstanding ability, and the re-election of Governor Dern to the Governorship of the State of Utah. He then introduced Governor Dern, a fellow member, to make the address of welcome. Governor Dern assured the meeting a hearty welcome. He spoke of Utah as one of the important mining states of the Union, particularly in metal mining; the magnitude of Utah as a coal mining state being limited only by its market; of the enormous coal resources of Utah, and the problems of the coal mining industry.

Jan 1, 1929

Jan 1, 1982

CLARK MOSELEY RMCMI PRESIDENT 1998-1999 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 95th Regular Meeting and Convention to be held June 27 thru June 29, 1999 Crested Butte, Colorado

Jan 1, 1998

By Thomas Collier

MR. PRESIDENT AND CO-WORKERS IN THE COAL INDUSTRY: I was requested by our president to prepare a paper on Longwall Coal Mining, to be read before this honorable organization. There are three general systems of Longwall, Longwall advancing and Longwall retreating, and the Nottingham system which is worked in England and South Wales. In Fremont county, where I am employed, the Colorado Fuel and Iron Company are working their mines on the advancing system. The face is started generally from the bottom of the shaft or other mine opening, or, at the outside of the pillar left to support the shaft or slope-bottom and advances toward the boundary of coal area. As the roads in this system are maintained by pack walls, it is sometimes called gob-roads system, and by these means the mine is opened up rapidly and consequently early returns are secured from the capital invested. By this method, there is no expense for narrow work, and a minimum amount of timbering of the roads is required. Now what I call ideal Longwall work is where there is about eight inches of dirt mining-and four and one-half feet of coal, .and when the entries and rooms will gob themselves, so that there will be no rock or dirt to haul out to the surface. But this is not the case in the mine I am in charge of. The entries and rooms will not gob themselves, therefor we have to haul the rock and dirt to the surface, which runs up the cost of production. Now the ideal roof in Longwall is composed of tough elastic and pliable strata that yield gradually by bending when the coal is removed, and throwing a sufficient weight or roof pressure on the coal face to break the coal when the same has been mined or undercut. Timbering should be done systematically, the coal well spragged before the miner starts to undermine the coal. Cogs or cribs are alright in their place, but I am not a believer in crib in Longwall working because they are too strong for the roof and do not leave the roof to squeeze .down gradually and break the roof around the crib. Longwall work requires particular skill on the part of the miner, and a familiarity with the conditions affecting room and pillar work, and a good room and pillar mail may not be successful in. Longwall work. A good Longwall miner realizes more than any one else the importance of being regularly at his place every working day. A day lost causes his place to fall behind the others which makes his work harder, and his daily output is further reduced by the amount of small coal that is liable to result from the excessive pressure where the face falls behind. The bad results are also felt by the miner working on each side of such place, as the roof pressure is often insufficient and the coal does not break as well as when the face is kept in a uniform line.

Jan 1, 1921

Jan 1, 1985

[Participating Scholarship Colleges and Universities 148 Andalex Resources, Inc 99 Big Sky Coal Company 118 Canyon Fuel Company, LLC 100 Coal Age 141 Commercial Testing & Engineering Company 103 Continental Conveyor & Equipment Co 104 Copper Mountain Resort 139 Cove Shoe Co., Inc 116, 117 Dakota Coal Company 105]

Jan 1, 2000

Jan 1, 1926

TABLE ONE Accidents occurring in the Coal Mines of Utah by fiscal years: [Deaths ........................ Permanent total disability ...... Permanent partial disability. .... Temporary disability: .......... 28 days and over 14 to 28 days ............... 4 to 14 days ............... Under 4 days ]

Jan 1, 1922

[ ] RMCMI PRESIDENT 1985 - 1986 ARTHUR K. NEILL on behalf of The RMCMI Board of Directors and Officers invites you and your family to attend The 82nd Regular Meeting and Convention of The Rocky Mountain Coal Mining Institute to be held JUNE 29, 30 AND JULY 1, 1986 Kalispell, Montana

Jan 1, 1985

By John Bevan

In a discussion of the personal dangers that may arise from mine gases, it is necessary to take into consideration the gases which may result from an underground fire, or a fire in or about the downcast shaft, and the methods of avoiding or minimizing the danger arising therefrom. In all cases of the combustion of carbonaceous material such as coals and timber, carbon dioxide and water vapor are formed. In cases where the air supply is limited, some carbon monoxide is produced, the quantity varying with the readiness with which the oxygen from the air can get into intimate contact with the consuming carbon; in addition to these products there may be produced large volumes of irritating fumes consisting of unconsumed vapors' distilled from the burning material. Apart from the physical distress that may be caused by the irritant action of the fumes, the chief danger to life underground arising from a fire in or about the downcast shaft or intake airways is due to the carbon monoxide which the smoke is almost certain to contain. The physiological effects of this gas have already been discussed in mining papers and ref¬erence should be made to this. The prevention of fires at the surface near to the mouth of the downcast shaft, or in the shaft itself, or at the bottom of the shaft, usually lies outside the duties of the fireboss. An outbreak of fire at such places would, however, immediately foul the air current passing into the mine, and, assuming the men were in the mine, create a situation demanding urgent attention of the fireboss. As a rule, each case of fire creates its own problems, but in all cases the guiding principle should be to restrict the poison-laden 'air to the smallest part of the mine that is practicable, by opening separation doors, or breaking down selected stoppings at the most accessible points near the seat of the fire, so that the gases and smoke may pass directly into the return and so to surface. In the case of a shaft fire it will have the effect of fouling both shafts and in the case of a fire in an intake airway, both roadways leading to the shafts. It requires the use of some judgment. Therefore, in circumstances as to whether men inside the mine should attempt to escape to the shafts or should remain in the mine, and attempt to protect themselves from the poisonous air by suitably short circuiting the air-current and retiring from the main air-ways. In order to make such restraint easier, it is very desirable that all mines should be equipped with telephone communication from all sections of the mine to the surface so that men in the mine may be informed of what is being done at the surface to secure their safety, or instructed as to what they themselves should do. In cases of fire in or about the shafts, the question of the reversal of the air-current will probably arise. Should this be decided on by the management at the surface, the fireboss in the mine may have to give some attention to the effects which this action will have on the circulation of the

Jan 1, 1922

Jan 1, 1987

Jan 1, 1986

By E. R. Gibson

It is quite generally conceded that the coal mining industry is among the most progressive in the adoption of modern and efficient equipment and mining methods, but most woefully antiquated in many respects in the matter of systematic accounting. The cause of this condition is problematical, but is usually thought to be due to false economy. We realize that those who do not understand accounts, or like accounting, are inclined to be disdainful of accounts and statistics, and to under-estimate the benefits derived from the expense and labor involved in proper accounting. The business that is run without a proper accounting system is subject to haphazard financing and courts disaster. Furthermore, the operator who disposes of his product without due regard to the requirements of the industry as a whole, as reflected in the cost of doing business, is an unfair competitor. No one will deny that the possible production of coal in the United States is much in excess of the demand. While it is true there is an occasional shortage in certain localities, it is due to temporary abnormal conditions which are overcome in a short period of time, when the mines are again obliged to take idle time, and herein lies the danger, not alone to the operator who neglects to keep informed as to operating costs; but to his competitor as well. While physical conditions and operating methods differ materially, accounting methods must likewise differ in some respects, but irrespective of how the result may be obtained, a true statement of cost is absolutely essential. Daily cost statements may be preferred by some, but have proven unsatisfactory, generally speaking, because of variation in production as well as in both labor and material expense from day to day; therefore, we will confine our attention to a monthly cost statement. To be most effective, operating cost statements should be prepared and submitted to the officers as soon after the close of the month's busi¬ness as possible, to enable them to remedy any defects in the operations that might be discovered by an analysis thereof. Opinions differ materially with respect to the most efficient method of compiling and the distribution of labor and material. The writer believes that a time book which provides space in which to enter the number of hours worked each day of the month by each employe, together with distribution thereof, is the most accurate, simple and complete. This record will show the service performed by an employe each day of the month and the account to which same is properly chargeable. This, of course, refers only to the employe working by the-day or month. While there can be but little said concerning the compiling and distribution of miners' wages, as the weighman's bulletin used almost

Jan 1, 1921

Robert M. Magraw John W. Roshold Thomas H. O'Brien Joe Mann Walter M. Dake E. P. Lucas "How well they fell asleep Like some proud river, widening toward the sea; Calmly and grandly, silently and deep. Life joined Eternity."

Jan 1, 1948

Jan 1, 1923

Thomas J. LIEN RMCMI PRESIDENT 1997-1998 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 94TH Regular Meeting and Convention to be held June 27 thru June 29, 1998 Snowmass Village, Colorado

Jan 1, 1997

ACM Equipment Sales Co. ACM/ICM Andalex Resources, Inc. ARCO Coal Company Behre Dolbear & Company, Inc. Coastal State Energy Company Colowyo Coal Co. L.P. Commercial Testing & Engineering Company Continental Conveyor & Equipment Company Crane & Hoist Cyprus Amax Coal Company Dakota Coal Company Driltech Inc. Empire Machinery Energy West Mining Company Fleischli Oil Company Inc. Halbach & Braun Industries Hemscheidt Corporation GH Hensley Industries Ingersoll-Rand Company Jennmar Corporation Joy Technologies, Inc. K & P Sales Engineers, Inc. Kennametal, Inc. Kerr-McGee Coal Corporation LeTourneau,Inc. Long-Airdox Company Magnum Metals, Inc. McLanahan Corporation Morgantown Machine & Hydraulics Morrison Knudsen Corporation National Mining Association The North American Coal Corporation Peabody Coal Company Phillips Machine Services, Inc. Pincock Allen & Holt Powder River Coal Co. Ramsey Technology, Inc. Rust Tractor Company Salt River Project Savage Industries Inc. Stamler Corporation Tamarron Resort TerraMatrix Inc. Texaco Lubricants Company TIC (The Industrial Company Wyoming, Inc.) Trapper Mining Inc. Wagner Equipment Comp any Western Energy Company Wheeler Machinery Company

Jan 1, 1995