Search Documents

By Scholl EW, Ricken W

The simultaneous presence of fuel, oxygen, and of an ignition source is necessary for an explosion to arise. If one of these conditions is missing an explosion cannot take place. A continuous reduction of oxygen, often applied as a protective measure in surface plants, is not to be considered for underground mining because of possible danger to persons. Therefore, measures for avoiding explosions can only be concerned with lowering methane and coal-dust concentrations to an undangerous level and avoiding ignition sources. As these measures alone are not sufficient, additional ones have to be taken to keep the effect of an explosion as low as possible. Measures for controlling and monitoring methane are essential. Although the formation of dangerous coal dust concentration cannot be avoided it can be reduced. Dust-binding by means of hygroscopic pastes and dusting with limestone dust are effective measures to pre vent explosions.

Jan 1, 1981

By C Li

Removal of gangue minerals from ilmenite concentrates can beaccomplished by relatively low temperature roasting in controlled gasatmospheres to selectively enhance the magnetic separationcharacteristics of the ilmenite. At roasting temperatures below 800¦C the magnetising reactions are often not consistent with phase equilibria considerations. Metastable phases can nucleate and control the roasting products. In weathered ilmenites the phase assemblages and microstructures in the altered ilmenite grains can influence the roasting reactions. In this paper we give an overview of the phase chemistry of chemically weathered ilmenites and of metastable phases formed by low temperature roasting. We also report the results of roast experiments conducted in a neutral gas atmosphere. Major increases in magnetic properties after short roasting times at low temperatures were obtained for a range of ilmenite concentrates. For example heating a secondary ilmenite concentrate from Western Australia for 15 minutes in nitrogen at 600¦C gave an increase in the three kilogauss magnetic fraction from three to 92 wt per cent. The solid state phase changes accompanying the inert atmosphereroasts were characterised by combining elemental analyses withquantitative phase analyses of the ilmenite concentrates and their roast products. It was found that the phase reaction that is principally responsible for the increase in the magnetic properties of weathered ilmenites involves a transformation of disordered ferrous-containing pseudorutile to an ordered ilmenite-hematite solid solution containing typically ten to 35 mole per cent of the hematite component. Examples are given of the application of the inert atmosphere roast to effect separations of ilmenite from gangue minerals.

Jan 1, 2001

By F Baars, M Zu, C A. RosiFre, L Lobato

A genetic model for the genesis of high-grade (>65 wt per cent Fe) Proterozoic, banded iron formation (BIF)-related iron deposits such as the Tom Price, Mount Whaleback deposits in the Hamersley Province (Australia), the N4E, N4W, N5 deposits at Carajßs (Brazil), the Aguas Claras, Conceitpo, and Casa de Pedra deposits in the Iron Quadrangle (Brazil), the Donkerpoort West, Kwagas East deposit in the Thabazimbi iron ore district (South Africa), or the Saksagan ore field at Krivoy Rog (Ukraine), needs to take into account the: timing of regional metamorphism with respect to the upgrade of BIF to high-grade iron ore; significance and relationship of the proto-ore to the hydrothermal alteration minerals and zonation and the process of iron enrichment; source and oxidation state of the hydrothermal fluids that caused the iron enrichment; types of geochemical processes that caused the hydrothermal alteration and iron enrichment; and significance of the widespread carbonatisation of the host rocks as a prerequisite for high-grade BIF-related iron mineralisation.We argue that a unifying model for high-grade BIF-related iron deposits cannot, presently, adequately explain the geological and geochemical characteristics observed in these deposits and, therefore, provide two end-member models that take into account the diversity of geological and geochemical ore deposit features. Our discrete model for the genesis of high-grade, BIF-related iron deposits is based on the interpreted tectonic setting, distinct hydrothermal fluid source of, and processes observed in, major BIF-related iron deposits. We divide two end-members: Proterozoic deep fault-magmatic (Carajßs) type, and Proterozoic rift-basin (Hamersley) type.Both end-members experienced varying degrees of deep weathering episodes that effected the hypogene enrichment and, ultimately, yielded the high-grade iron ore mined in many places today.

Jan 1, 2005

By Huafu L, Ruishi N, Hongnian Y, Qinglong Z, Yangshen S

The Dongshan terrane was first recognized in 1984 (Guo,et al., 1984, 1989) as an old continental crust block of migmatized granitic gneiss in the Southeast Coastal Hercynian-Indosinian orogen, and it was thought to have occured on Dongshan Island, which has an area of less than 100 km? Recent research work has shed much light on the geology of the Dongshan terrane.The Dongshan terrane is approximately 40-50 km wide and 380 km long, trending NE. It runs from the region of the mouth of the Ming River through Putian and Huian Counties, Amoy and Dongshan island of Fujian Province to Nanao island of Guangdong Province, bordering the southern segment of the coastal region and coastal islands of Fujian and eastern tip of Guangdong Province. The Dongshan terrane is divided from the Zhejian-Fujian Mesozoic Volcanic Mountain Chains by the Changle-Shaoan fractural zone, and its eastern boundary is covered under water in the Taiwan Straits.

Jan 1, 1990

Trade unions are people. As organisations they exist to represent the needs and interests of their members; that is the workforce. Thus one of the underlying objectives of the trade union movement has been and will continue to be: achieving from management recog- nition that the labour input to the production process - whether that be in the factory, office or service context - is made up of individual people who can not be treated as just another factor of production. The essential difference between labour input and other factors of production such as capital and raw material is the "humanness" of the individual entities which make up a firm, company or industry's labour supply. Recognition of the "people" input to the production process has essentially two aspects: humanisation of the workplace and the treatment of labour as human beings who have a role to play both within the workplace and within broader society.

Jan 1, 1982

By A E. Annels, M NoppT

Ore Reserves are key mining company assets and their reliable estimation is crucial for both feasibility studies and the day to day operation of a mine. The reserve is based on the Mineral Resource after the application of certain technical and economic parameters. Engineering aspects of reserve estimation can be accurately determined to ¦10 per cent, however the majority of project risk will revolve around the resource. A final Ore Reserve generally contains a set of figures quoted without reference to its potential errors. Rarely are overall confidence limits quoted and, if they are, they often do not take into account many of the factors that cause uncertainty in the grade and tonnage estimates. There is thus an unquantifiable risk, which the operator should be aware of. This paper presents a review of the possible sources of error that might occur during the various phases of an exploration and estimation programme which are carried through into the Ore Reserve and hence mine design.

Jan 1, 2002

Development of a small ore body to 137m below surface was carried out in sixteen months driving 610m of 1:5 decline.

Jan 1, 1973

By Sorokin AP

The main regularities of the tectonic history of the Circumpacific belt's Asian segment are discussed. The established longitudinal metallogenic zoning is characterized by essential copper specialization being replaced in the.continentward direction by tin-tungsten and then by copper-gold-molybdenum and-tin-lead- zinc ones. The zones indicated show specific magmatism and ore forming fluid composition. The eastern margin of Eurasia experienced specific tectonic history and exhibits a wide variety of mineral deposits. It is composed of the Siberian and Sino-Korean cratons and of the largest mobile elements of tectonosphere like the Hyperborean, Urals-Mongolian, Mediterranean and Circumpacific belts. The Earth's Atlantic segment mobile features show deep penetration of their geosyncline-fold systems into the eastern margin of Asia. A good example is the Urals-Mongolian belt, its Intra-Asian branch being located within the continental margin. The Intra-Asian structural features have WE and NE trending, while folding process moved southward : Karelides and Baikalides are found in the Transbaikalia and the Soviet Far East (Stanovoy, Bodaibo-Patom, Baikal- Vitim, Selenga-Yablonovy fold regions)

Jan 1, 1987

By M Kuruppu

Large mining operations require a high percentage of the capital invested in mobile and fixed mining machinery. From an investment point of view this expenditure must be met by an equally high rate of return, thus the need for high plant and equipment reliability is of major importance. Equipment downtime is undesirable and very costly, resulting in lost production and revenue, which is of critical importance to successful mining operations. One of the solutions to this problem may be found in the form of competent computerised maintenance management software systems, which help to reduce the problem of breakdowns. These software assist the engineers for the management of service orders, resource allocation, progress monitoring as well as costing. They also facilitate the communication of targets and objectives among the service personnel. A computerised maintenance management software called MAINPAC was used to record and plan the activities of mobile equipment maintenance in a large mining operation in Western Australia. Among the details recorded were equipment data, service history, machine downtimes, previous maintenance, job planning and the resource required. This information further helped to analyse the maintenance efficiency, availability and the reliability of the equipment.

Jan 1, 2006

By D Phillips

One of great challenges is to determine the exact timing of gold mineralisation in centralVictoria due to suitable materials and/or geochronological techniques. Here we report new mica and pyrite 40Ar/39Ar age data by laser probe and step-heating furnace analyses, and discuss problems in data collection and interpretation. An EXTENDED ABSTRACT is available for download. A full-length paper was not prepared for this presentation.

Jan 1, 2008

Two continuous computer controlled, remote air analysis (RAA) systems operate at The Zinc Corporation, Limited (ZC) to give early warning in case of an underground fire at ZC or New Broken Hill Consolidated Limited (NBHC) mines. Air drawn from underground sampling points via a tube bundle system is analysed for carbon monoxide and carbon dioxide. An alarm is sounded if the concentrations of these gases exceed bench mark figures.

Jan 1, 1983

By Runge IC

The mine planning process is reviewed and appropriate software considered in terms of "line process" or "support function". The mine planner's requirements of a geological model and the elements of and requirements of a computerised mine planning system are all discussed. The use of "support" software for mine planning is considered and general rules for its development are given. Important changes involved in implementing a computerised mine planning program are listed.

Jan 1, 1983

INCREASE OF THE OIL CONSUMPTIONIt is of the greatest interest to study the prospects open today for the petroleum industry by looking back to the past years.The' results for the past 15,years can be said. to be- satisfying; - the develop-ment of the petroleum industry has sustained a very fast tempo and the world consumption of energy has around the years 1960-1961 - reached aòpeak figure.Undoubtedly, the petroleum industry is the principal beneficiary of the growth of world, energy demand. For the caning years a slackening of the rate of expansion is'. likely to be expected; but will. not alter the general trend. This ' slackening of expansion may be explained, partly by a better use of the energy consumed and by the increased use of new types of energy, mainly natural gas.Although.the development of world energy demands follow structural and tech-nical modifications".,-At. can be foreseen, without any doubt, that the petroleum products. consumption. vri 11 be less affected than any other type of energy by this limited reduction in the rate of increase.

Jan 1, 1962

New Zealand's obligations under Kyoto protocol New Zealand's economic and emissions profile Use of energy and electricity generation in New Zealand World energy supply Coal's rule in the world today Coal and New Zealand Future energy needs in New Zealand Clean coal technologies

Jan 1, 2002

By D Lees

Safety is paramount in the underground mining environment. The mining industry has for many years focused on injury prevention in the workplace through procedures and training. In the area of control of major accident events that could result in single or multiple fatalities, and serious injuries, the mining industry approach has concentrated mainly on past experiences and lessons learnt. However, in the last 20 years, other high hazard industries, such as the chemical process industry and oil and gas industry have developed the Safety Case approach, using systems safety techniques and risk assessment as a means of identification and control of major accident events. The Safety Case approach is now being introduced into Australian underground mining. This paper describes the Safety Case approach and how this can be adapted to underground mining. This is a holistic approach and assists in ranking significant risk contributors and prioritising risk management efforts. The discussion includes how the Safety Management System interfaces with the Formal Safety Assessment in effectively controlling the hazards. It provides examples from actual case studies conducted by KBR, and suggests ways forward for the industry.

Jan 1, 2003

By P Allum

This paper presents a case study to reduce the operational cost on the secondary ball mill circuit in the Lead/Zinc Concentrator at Mount Isa Mines. The circuit includes two five-metre diameter ball mills each closed with a cluster of ten 15-inch cyclones. The operating cost for both ball mills is about six million Australian dollars per annum.The concentrator achieves 75 per cent of the plant design capacity with one ball mill operating, but will have to use two ball mills when 100 per cent plant capacity is required. The optimisation study on the circuit identified a new flowsheet that enabled the concentrator to reach 100 per cent of the capacity by using one of the two secondary ball mills. The success of the project utilised the existing equipment rationally and saved the operational cost for one ball mill at full concentrator capacity. A further simplified secondary circuit is proposed using the IsaMill for the secondary grinding duty. Performance of the IsaMill circuit and the potential cost savings are predicted.

Jan 1, 2002

Problems encountered in the design, construction, acceptance, commissioning and early operation of the electrolytic zinc plant at Port Pirie are reviewed. Recommendations based on the author's experience are made for proper control of each phase of the development of new plants.

Jan 1, 1971

This paper deals with the Australian taxation laws, and in particular the income tax laws, as they apply to mineral exploration and development both in Australia and off-shore. The Australian tax laws are imposed principally at a Commonwealth level. The most important Commonwealth taxes are Income Tax, including Capital Gains Tax, Fringe Benefits Tax, Sales Tax, Customs Duty, Excise Duty and Bank Accounts Debits Tax. The States of Australia impose Stamp Duties and Financial Duties, Payroll Tax and Land Tax. The Australian Income Tax Law including Capital Gains Tax, is the most significant tax in the country. The principal features of the income tax law are as follows: tax is imposed on a taxable income being the assessable income less allowable deductions; a full imputation system of company tax applies; a foreign tax credit system applies to both companies and individuals; capital gains are taxed as income and subject to income tax rates but the gain is inflation adjusted. Australia has negotiated tax treaties with most of its trading partners based on the OECD model; and special tax concessions apply to the mining industry.

Jan 1, 1987

Groundwater issues for the mining industry are many and varied. When the depth of mining is below the water table/potentiometric surface, a groundwater æsinkÆ is created which alters the local groundwater flow regime resulting in minewater inflows. Assessment of mine dewatering, mine water balance and wastewater disposal requirements are central to the effective management of water in a mining operation. Each of these issues has a significant groundwater component. Other groundwater issues for mining operations include: water supply, aquifer storage and recovery, the impact on other groundwater users in respect of groundwater levels, bore yields and water quality, and the development of an effective groundwater monitoring network for early detection of impacts and to satisfy regulatory requirements. This paper outlines the techniques involved in assessing groundwater issues for project feasibility, during operation and post closure, and provides an overview of several mine dewatering and water disposal methods. The practical assessment of groundwater issues for the mining industry is illustrated with several case studies of mining projects in Australia, SE Asia and the subcontinent. These are projects to which the author has contributed during a career as a geologist/hydrogeologist spanning more than 25 years.

Jan 1, 2003

This paper provides an expanded definition of industrial minerals that challenges the way we look at exploration, development and the understanding of mineral industry structure and profitability. Included in industrial minerals are bulk commodities such as iron ore and coal alongside the more traditional industrial minerals such as salt, soda ash, silica sand and clay. The profitability of industrial minerals is reviewed from a producerÆs perspective and shown in many instances to be significantly higher than for precious and base metal industries. The key drivers of profitability are examined along with some highly profitable industrial mineral industries such as borate, potash, chromite and natural soda ash. Demand for industrial minerals in Australia and Asia is reviewed, with a focus on supply bottlenecks and the opportunity this represents for investment by Australian companies. The establishment of new price benchmarks is considered and the possibility of new export grades for industrial mineral products. Investment opportunities in industrial mineral projects are outlined, including some exploration concepts in Australia and Asia. Industrial mineral project evaluation methods are discussed and the challenge issued to companies (exploration, production and finance) to become a part of the profitable action in the world of industrial minerals.

Jan 1, 2004