Search Documents

By Franklin P. Wood

Unnumbered ages have passed since the time when nature's laboratories were working without the aid of capital or labor unions assisted only by earth's cooling crust and old Sol's rays, to lay the prodigious coal beds of the earth and distil the oils which now furnish the basis for the world's great industries. Strangely enough rays from the same old sun probably somewhat diminished in intensity are still drawing from earth to clouds the water that will run down hill and through man-made devices produce energy to compete with that made with the products created in ages past. So now we find that within the past century vast human industries have grown up around the products of these agencies and here we are today discussing the many problems connected therewith and among the others the subject of this paper, which is essentially the relation of COAL to OIL in industry. The problems involved are those of human relationship and are not fundamentally unsolvable when engineering skill and knowledge is properly applied. The last few years has developed a brand of pessimism that is especially prevalent in the coal industry, at any rate in the west where we come in contact with it. In any general discussion with coal men, a very short time only is required to bring out the feeling or expression that the coal business is on the rocks and the reasons run the gamut of human deviltry. We have heard that in the not far distant past corn was so cheap that the farmers were compelled to burn it and thus deprive the coal mines of their well earned right to sell coal for this purpose. We have heard that the flood of oil is so vast that it was being burned in preference to coal, and to heap insult on injury that the rail- road locomotives were burning oil in order to pull coal away from the mines. We have heard that the union was responsible for all the woes to which the industry is subjected. We have heard that the family tin lizzie is so depleting the family exchequer that coal could not be purchased and if purchased could not be collected for. We have heard that producing mines are so numerous that the profits are a negligible quantity. These are but a few of the reasons assigned for making the coal producers a class of pessimists which is not good for the industry. All these reasons given and all the others must be taken collectively and these are not the cause but the effect of a rapidly changing civilization. An analogy may be found in the experience of many of us in the electric industry a few years ago. You may remember that less than 20 years ago the high efficiency Tungsten electric globe was introduced. It was so much more efficient than the old carbon lamp that only one-third of the current previously required was needed to produce the same illumination. Consternation seized the ranks of electrical men who had little or no vision, for the out- look was that so little current would be sold that everyone would be bankrupt. This limited vision, however, did not prevail, for all engaged in the industry spurred on by necessity, accomplished many of the things that we are now enjoying the fruits of be- cause the electric industry has grown and is growing by leaps and bounds and every highly efficient improvement is greeted with rejoicing. It is well known that when the old type of carbon arc lamp began to be replaced by modern units the manufacturer of carbon rods thought his doom was sealed and yet these same manufacturers have so adjusted them- selves to conditions that the dry battery business of today is of vastly greater volume and profit than was the carbon rod business of the past. Of course, there are industries that should not have survived anyway that have gone down and out to makeway for vastly improved conditions and can

Jan 1, 1925

By F. C. Miller

The briquetting of fuel is an industry centuries old and has followed the hammer and tongs method of making use of any by-product fuel by the simple process of sticking the mass together with anything that will stick. If fuel briquetting, as an industry, once in the lead over coal mining, had kept pace by introducing science, there would not at this time be the mad scramble to look up the fuel briquette family tree and accept every new method as fruit without the cultivation that makes fruit worth while. Cultivation of industry is a mass of evidence showing a tremendous expenditure of money for mistakes paving the way to success. Cultivation of the mining industry is practiced by nations and low temperature distillation and fuel briquetting will in the near future receive the same consideration. Fuel briquettes were used as a winter fuel in Ireland and Scotland before the discovery of America' or the introduction of coal as a fuel to replace briquettes in Ireland. This industry was practiced by the peasants who collected peat from the bogs and cut it into brick-shaped blocks, which were set up to dry in the sun and stored under cover for use or for sale. Demand for peat briquettes led to competition that resulted in a highly refined fuel. In some localities the peat was ground and purified from the earth by washing before placing in presses to squeeze out the excess moisture and form a block of peat about four inches thick. These blocks, after standing in the sun for a few weeks, were cut into briquettes about four inches square by twelve inches long and moved under cover where they remained until thoroughly dry. In this form peat makes an excellent fuel with considerable heat, small amount of smoke while burning, and tough enough to stand hauling in carts and boats without breakage. Slack from domestic coal, non-coking and anthracite, has until recently commanded a very low price and the attention of briquette men has centered on ways and means of preparing this class of fuel for the market in the form of briquettes. Industrial plants with automatic stokers have taken kindly to cheap slack or slack that was cheap because the price has been boosted to a figure where the cost of slack plus the cost of binder and operation makes fuel briquettes somewhat expensive. However, fuel briquettes are being turned out in commercial quantities to compete with prepared lump coal and the demand is in favor of the briquette man. Science has been called to aid the briquette and it is possible to purchase a complete coal briquetting plant that will turn out between four tons per hour and thirty tons per hour of briquettes at a calculated cost per ton to cover material and every item down to insurance on the plant. A few briquettes are being ' made with a mixture of- Portland cement and pulverized coal, where this class of briquette is cheap in the making, there is the increased amount of ash due to the cement to contend with and the briquette is not one that can compete with lump coal. Most binders have a fuel value, such as coal tar, pitch, asphalt residium, flour, glue and secret binders. Most briquettes are of an egg shape, weighing between one and one-half ounces and five ounces, pressed to form with a pressure varying between 1,000 pounds and 2,500 pounds per square inch. This' pressure, together with the binder, make a lump of fuel harder than most grades of soft coal. Most of the briquettes are free from pitch odor, and any tendency to leave a trace of the binder on the fingers, easy to handle, quick to, ignite, high in heat value and capable of indefinite storage without any change. Evaporative efficiency of briquetted fuel in stationary, marine and locomotive boilers has proved that a great many low-grade coals can be fired successfully in the briquetted form, where the same fuel without briquetting failed to give boiler rating.

Jan 1, 1923

MR. TESCHER (Disaster at Dawson) : I move that you appoint a committee of nine members of this Institute to draft a set of resolutions that we can send out to all members of this Institute, to the mine officials in all four states, that might go towards preventing these disasters; that we reach all men, all mining men, mine officials of all kinds. I think we have enough brains to carry out a few suggestions of that kind. I think you are fully familiar or know men who are fully qualified to act on this committee. The only qualification that I have is to ask that Mr. Harrington be appointed a member of this committee. PRESIDENT WHITESIDE: You have heard the motion, and I believe it was seconded. Is there any discussion? That is a subject that really needs a great deal of thought. MR. LAMB: Things like that can't be handled in a minute. What Mr. Tescher suggested is all right, but to my mind, going into a great many of these different properties, seeing the conditions, such things hit pretty close to home. I would suggest that you put this off; lay it over until such time as the people who had the disaster have some time to think these things over. It is too soon to offer even a suggestion. Suggestions are all right, but there are no nine living men in the United States who can stand up or sit down and talk it over and give you any reasonable answer, in one hour or six months. First, you would naturally have to go down there and converse with the men who were at the camp at the time. You are all operators; all you operators would -like to talk it over today. You realize that anything that is good for the camp is always acceptable in disasters of this kind. I say, do it gracefully and not by publication. MR. TESCHER: I feel that the men present know these suggestions by heart and they don't have to discuss them. They know them instinctively and they know they will apply to any mine. It must be understood that if these suggestions are not carried out, they ought to be; and there is a motion before the house. PRESIDENT WHITESIDE: Mr. Murphy, you started to rise to your feet a moment ago. Have you anything to say on the subject? MR. MURPHY: I have just returned from a visit to Mr. Brennan. Mr. Brennan and I have worked together for twenty years. The manager of our company asked me to go down there and express his sympathy. Those things come to all men if they live long enough, in the coal business, and he wanted me to express to Mr. Brennan personally his sympathy and deep regret. What I had in mind when I started to rise, was to suggest that the Institute as a whole express its sympathy to Mr. Brennan. I don't think there is a man in Utah, Wyoming, Colorado or New Mexico who has done more in safety' lines than Mr. Brennan, and it just seems bad luck that he had this disaster, and I am in hearty sympathy with the gentleman who spoke about not appointing this committee. I believe a resolution to Mr. Brennan would be very much better. JAMES DALRYMPLE: I am in sympathy with this gentleman here. I think it is going to hurt the feelings of those connected with the mines in which this disaster occurred. If you will give me the privilege for a few minutes, I will gladly express myself and the action that has been taken in the past by this Institute, and my opinion combined with a great many other opinions. And what I am going to say is going to be said by the-well, I am going to say it as I see it. I am going to say it not in an unfriendly spirit, but from a spirit of not undue criticism. I happen to be one of the original members who organized this Institute. I did what I could to obtain memberships. I remember very well when we had our first meeting that we had a very large membership. I think I have a photograph of the members which was taken on the steps of the Capitol building at that time. Our membership at that time was composed largely of underground officials. I mean by "underground" officials, the superintendents to some extent, the mine foremen, their assistants,

Jan 1, 1923

By D. C. McKeehan

The use of electric power was introduced in this field in the year 1892. The initial installation being an engine-driven generator and one nine-ton haulage locomotive using 500-volts direct current. Reference to this locomotive appears in the issue of COAL AGE for February 24, 1921. For a large coal field, the conversion to electricity has been very complete, there being no compressed air machines in service and but one steam driven hoist, that at No. 1o mine and located within fifty feet of the present power plant boiler room. Two eight-ton haulage locomotives, installed in 1896 and still in use, justifies the service and the equipment. These mines used the pioneer types of electric cutting and drilling machines, the story of which is, no doubt, familiar to you. The extensive use of electric power began in 1900, when there was installed four 400 k.w., 500-volt direct current engine-driven generators. These were cross-compound machines and operated non-condensing. By 1910 the mines had developed main haulage entries of several miles in length and a working territory of about six square miles in area. The necessity of supplying adequate power at the working face required a local power supply from motor-generator sets in various parts of the mine to supplement the power furnished by the engine-driven generators. The power to these motor-generator sets was supplied by a 300 k.w. high pressure non-condensing turbo-generator delivering 2300 volts, 60 cycle, three-phase current. This marks the beginning of the use of alternating current for mining purposes. In 1913 new mines were being developed at Reliance, seven miles distant, and the plant was enlarged to accommodate a 750 k.w. low pressure, condensing turbine, utilizing the exhaust steam from the cross-compound engines and the 300 k.w. turbine. Transformers were installed for supplying Reliance with power at 13,200 volts. In the course of time the old engines began to dismantle themselves by throwing various pieces, such as cylinder heads, about the building, damaging walls and switchboards, and created a general feeling of unrest among those who had to do with power production. The limitations of the old engines that had given admirable service for ten years were recognized. The source of exhaust steam became questionable and in 1915, a 1000 k.w. high pressure condensing turbine was installed in order that a more general use could be made of motor-generator sets for the direct current supply. The plant at that time containing a 1000 k.w., a 750 k.w., and a 300 k.w., in alternating current generators, supplemented

Jan 1, 1921

PRESIDENT MOSES: I thank you, Mr. Emrick. Mr. Shubart would like to supplement your paper with another article. SECRETARY SHUBART: My paper really should not supplement Mr. Emrick's paper, because I secured some data from him, I knew Mr. Emrick had had a great deal of experience in shearing and I thought he could give you some useful data. (Here Mr. Shubart read the following:) "For the past two years, there has been considerable discussion among coal mining men concerning the advantages of a shearing cut in addition to the undercut, in mine work. We have had a number of requests for information on sheared coal. We were asked questions like these: What percentage increase in lump can be obtained from sheared coal? What has been the experience of mine men who have employed the shearing cut? Is the shearing cut a means of increasing the lump content? If so, is it increased to such an extent as to warrant the installation of shearing machines? Upon investigation it was found that no one could give us any definite information on the subject as no one had weighed separately the grades of coal produced from' the shearing cut. With a view of getting this information first-hand, the Goodman Manufacturing Company built up a shearing machine to be used in experimental work only. The officials of the Troy Coal Company were eager to share in the expense of obtaining this information, so that in May of this year we shipped to their mines our first type 319 shearing machine. The Troy Coal Company operates a mine at Troy, Illinois, in the No. 6 seam and produces about 275 tons daily. The coal seam averages five and one-half feet in thickness. Previous to the arrival of the shearing machine the coal was undercut six feet deep by a' Goodman Shortwall Machine. To break down the coal required two shots in the entries and three in the rooms. The percentage of lump measured over two-inch screens, averaged 58.2 per cent. The conditions of the mine were very favorable for obtaining accurate weights on the amount of lump and slack coal run over the shaker screens. The shearing machine easily cut the entire tonnage of the mine so that all coal dumped into the railroad cars had been produced from a shearing cut, in addition to an undercut. Accurate records were kept of the railroad weights and front this data the percentages of lump and slack were computed. During the month of June the percentage of lump produced over two-inch shaker screens was 69.9 per cent. This result demonstrated that the introduction of the shearing cut had increased the percentage of lump twenty per cent. The entries were driven ten feet wide and the rooms thirty feet wide The shearing cut was made near the center of the face in all places. A hole was drilled in each rib and the coal shot down with one-half the powder required when the places had been undercut only. The coal was broken down to the back of the cut so that very little pick work was necessary to load it out. The benefits derived from the shearing cut were as follows: 1. Increased percentage of lump, thus increasing the average price of coal per ton. 2. Preservation of a tender top due to the decreased amount of explosive used. 3. Facilitated handling of coal by the miner thus increasing the tonnage per man. 4. Eliminated coal yardage in entries and crosscuts of ten feet or less in width for the reason that the shearing cut provides a loose end from which to shoot the coal. This applies to the union fields only, as the non-union mines do not pay for coal yardage. Based on a price of $2.50 for lump coal and $1.25 for slack coal, the average price per ton was increased

Jan 1, 1926

Jan 1, 1921

Jan 1, 1925

The Role of Partnerships ?Industry history ?Companies were their own kingdoms ?MSHA and NIOSH were out of touch and focused on enforcement with no direction ?Labor and management were constantly at odds with each other

Jan 1, 2002

Jan 1, 1994

[ ] RMCMI PRESIDENT 1985 - 1986 ARTHUR K. NEILL on behalf of The RMCMI Board of Directors and Officers invites you and your family to attend The 82nd Regular Meeting and Convention of The Rocky Mountain Coal Mining Institute to be held JUNE 29, 30 AND JULY 1, 1986 Kalispell, Montana

Jan 1, 1985

Jan 1, 1923

[Participating Scholarship Colleges and Universities 144 Andalex Resources, Inc 91 Behre Dolbear & Company, Inc 93 Canyon Fuel Company, LLC 92 Big Sky Coal Company 114 Commercial Testing & Engineering Company 96 Continental Conveyor & Equipment Co 97 Copper Mountain Resort 108 Cove Shoe Co., Inc 110, 111]

Jan 1, 1999

PRESIDENT LITTLEJOHN: Until Mr. Wood comes back, we have a gentleman with us who has been sitting in one of the back seats. He has never gotten up and showed himself, and I think we ought to call on Mr. Ryan to stand up and say two words, or a half dozen words. Mr. Ryan! (Applause.)

Jan 1, 1925

[ ]

Jan 1, 1996

This session was devoted to Surface Mining. Presiding was Virgil W. Carmichael, Vice President- Exploration, North American Coal Corporation, Bismarck, North Dakota, and John (Jack) F. Ratchye, Manager of Marketing and Resources, Peter Kiewit Sons' Co. Mining District, Sheridan, Wyoming. Subject-The new Federal Surface Mining Regulations-a thorough briefing as to content of law and how it will affect western mining. Introductory Speaker: William Hynan, Senior Vice President, National Coal Association, Washington, D.C. (See index for printed text of Mr. Hynan's paper.) Panel Members: The first speaker was George M. L. Robinson, Senior Hydrologist, Peabody Coal Company, Denver, Colorado. Mr. Robinson has a B.S. Degree from New Mexico University, Portales; Masters in Hydrology, Kent State, Ohio.

Jan 1, 1978

[Page Officers of the Institute 5 Minutes of. Twentieth Meeting 9 "Cutter Bits"-J. H. Emrick 12 Discussion 16 Experiments in Roof Control-D. A. Stout 18 Discussion 28 Use of Permissible Powder in Coal Mining-H. Petersen 35 Discussion 38 Safety Measures-F. C. Miller 40 Automatic Mine Fan Signal-O. C.. Irwin 45 Discussion 46 The Operation of Gaseous Mines-Samuel Tescber 51 Discussion 55 "The Alamo Mine"-E. H. McCleary 60 Discussion 69 Mudite Discussion 71 The Mudite Machine-Ogden Iron Works Co 73 Reducing the Labor Turn-Over-Eugene McAuliffe 79 Coal vs. Oil Competition-Franklin P. Wood and Eugene Weber 81 Miscellaneous Discussion 86 New General Coal Mine Safety Orders of the State of Utah-B. W. Dyer 90 Discussion 93 Wednesday Afternoon Session 103 Comment on Utah Mining Law-Wm.Monay 104]

Jan 1, 1925

Thomas J. LIEN RMCMI PRESIDENT 1997-1998 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 94TH Regular Meeting and Convention to be held June 27 thru June 29, 1998 Snowmass Village, Colorado

Jan 1, 1997

[HORACE MOSES President Gamerco, New Mexico BENEDICT SHUBART Secretary-Treasurer 521 Boston Bldg., Denver, Colorado ROBT. L. HAIR Vice-President for Colorado VIRGIL R. McKNIGHT Vice-President for New Mexico A. E. GIBSON Vice-President for Utah THOS. FOSTER Vice-President for Wyoming EXECUTIVE BOARD COLORADO: J. B. DICK Walsenburg C. M: BILLINGTON Lafayette NEW MEXICO: W. C. HOLMAN Dawson ROBT. WYPER Gallup UTAH: R. R. KIRKPATRICK Sunnyside GEO. A. SCHULTZ Latuda WYOMING EDWARD BOTTOMLEY Kleenburn QUINCE RICE Superior]

Jan 1, 1926

Presiding-Thomas R. Young, President, Wyoming Fuel Company, Lakewood, Colorado. Mark Gillaspie, Vice President, San Marco Pipeline Company, Houston Natural Gas Company, Houston, Texas, presented a very interesting film-"Invocation in Coal Transportation-Black Mesa Coal Slurry Pipeline." (See index for printed text of Mark Gillaspie's remarks) * * * Kaye Kuhlmann, President of Citizens for Total Energy, San Jose, California, presented a paper-"Grass Roots Support for Energy Policy." (See index for printed text of Mrs. Kuhlmann's paper.) Mrs. Kuhlmann is President of Citizens for Total Energy, an International volunteer grassroots organization with the purpose of educating the public on energy alternatives. CITE strongly advocates responsible citizen participation in the establishment of energy policy.

Jan 1, 1980

The Thirty-third Regular Meeting of the Rocky Mountain Coal Mining Institute was called to order at 11: 10 o'clock A.M., Monday, March l8th, 1935, President H. H. Bubb presiding. On motion of Gilbert Davis, duly seconded, it was voted that the reading of the minutes be dispensed with, inasmuch as they are printed in the proceedings. Owing to the absence of Mr. H. C. Marchant, who was unavoidably detained in Washington, Mr. F. W. Whiteside, Secretary Pro Tem, made the annual reports of the Secretary-Treasurer, which, on motion duly made and seconded, were received."

Jan 1, 1935