Search Documents

By M. Nambiar

Due to the remote locations of mining projects and the need for long transmission lines to provide electrical power, mining sites often operate with poor network power quality and low short-circuit capacity. To cope with this situation, more and more mining operators are considering the installation of appropriately designed synchronous condensers together with power factor correction and harmonic filter systems (PFC & HFS). The installation of such power quality equipment is viewed as a technological advancement in the mining application. An adequate level of short-circuit power is essential and has to be ensured for the safe and reliable operation of especially large cycloconverter-driven gearless mill drive systems (GMDs) used for grinding. This paper explores the impact, technical advantage and reasoning for the selection of this advanced hybrid technology to cope with the power system challenges of future mining projects. It also delves into the potential problems and how to address them.

By Manoj Khandelwal, Bright Akuinor Tsidi, Newton Amegbey, Daniel Mireku‑Gyimah

One of the ambient effects of production blasting is flyrock. To effectively manage flyrock throw distance in mining, there is the necessity to successfully envisage blasting output without sacrificing the hazardous impact of flyrock which may result in fatality and operational shutdown. For flyrock throw distance prediction, velocity of detonation (VOD) and charge per bank cubic meter (CPBCM) are not usually included. This paper focuses on the use of support vector machine (SVM) regression to ascertain the impact of VOD and CPBCM on flyrock throw predictions. The machine learning models were linear support vector machine (LSVM), quadratic Gaussian support vector machine (QGSVM), fine Gaussian support vector machine (FGSVM), medium Gaussian support vector machine (MGSVM), and cubic Gaussian support vector machine (CGSVM). The outcome indicates that FGSVM was the most sensitive with a 4% improvement when VOD and CPBCM were included. As a result, the LSVM model provides a suitable AI competitive alternative tool for flyrock throw prediction in mining operations by incorporating VOD and CPBCM.

Feb 10, 2024

By Ken Mills

A program of stress change and roadway deformation monitoring was undertaken to measure the forward abutment load distribution about a retreating longwall panel at Dartbrook Mine. The results of this monitoring allow roadway conditions observed at various stages of mining to be ranked according to the estimated vertical stress they have experienced. This ranking also provides a means to predict and visualise future roadway conditions at various stages of mining. This paper presents the results of the monitoring and describes the approach developed to predict future roadway conditions. The monitoring results show the vertical stress distribution associated with the front abutment from a longwall goal decreases exponentially away from the goaf edge. The vertical stress distribution peaks at the goaf edge at 5 to 6 MPa stress increase and decreases to 1 MPa within 50 m becoming imperceptible beyond 100 m By scaling this measured distribution to reflect the loading environment, the vertical stress can be estimated for different overburden depths and different stages of mining. Photographs of roadway conditions at particular vertical stress levels provide a way to visualise roadway conditions at various stages of mining in the future

Jan 1, 2000

By AIME AIME

OVER-ALL operations of the oil industry, as measured by production of crude oil and consumption of products, are almost exactly of the same magnitude as a year ago. Does this mean that the great oil industry has been undisturbed by the war? Has this industry, so vital to the prosecution of the war and to the maintenance of our way of life, been unaffected in its operations? No indeed - changes within the industry are great. It has been called upon to revamp its trans¬portation methods so as to move about one fourth of the total amount of crude and refined products by railroad tank car instead of by ocean-going tankers. Its fundamental internal economy, based on maximum gasoline yield from a barrel of crude, has been relegated to memories of the past. Rationing of oil products, which has been forced upon us in face of an abundant supply, is not only disagreeable medicine but is in itself completely disruptive to the marketing end of the-business.-

Jan 1, 1942

By James W. Evans, Brian R. Wildey

"Carbon has been the principal reducing agent in producing metals for centuries. Carbon is an inexpensive reducing agent, but also an effective one, as any undergraduate who knows her Ellingham diagrams is aware. Even in the production of aluminum, an electrolytic process, carbon consumed at the anodes serves to reduce the voltage of the Hall-Héroult cell. The interest in reducing the amount of anthropogenic CO2 has led to this examination of whether a switch to hydrogen as a major reductant is feasible and economic. The main source of hydrogen is natural gas and its production entails the generation of CO2; however, that CO2 is more easily captured than, say, the CO2 leaving an iron blast furnace. Calculations and speculations lead to conclusions about whether there is significant benefit to be obtained from such a radical change in our way of producing metals and the approximate cost of such change.IntroductionThe 1991 paper by Forrest and Szekely1 was one of the first to examine the impact of CO2 emissions from the primary metals industries on global climate change. These authors compared data from 1968 and 1985 and reported a drop in carbon emissions from 115.8 million tons to 65.6Mt over this period, the latter figure representing approximately 1% of the world’s greenhouse gas emissions. Much of this reduction was due to a drop in steel output (with carbon emissions increasing within the aluminum and copper industries in this period) but some were due to technological changes such as increased use of continuous casting. A more recent paper on CO2 emissions, focused on the steel industry in Japan, is that of Ariyama and Sato2. These authors report CO2 emissions of 182.4Mt from the Japanese steel, industry in 2003, down from 194.8Mt in 1990. The former represents 14% of the GHG emissions for Japan in 2003. Much of this emission is from ironmaking and the authors break these emissions down into"

Jan 1, 2008

By J. H. Starkey

Large differences between macro and micro grindability relationships have been discovered for mill design measurements using the patented SAGDesign(TM) test. Crushing, Rod and Ball Mill Wi tests, and breakage parameter measurements have previously been used to design SAG mills but have not revealed the true magnitude of these differences. A SAGDesign(TM) test measures the SAG/Bond Wi Ratio (defined below) for every sample tested and gives a good design result because the F80 of the SAG stage test feed is 19 mm and because the test includes a Bond Ball Mill Work Index on SAG ground ore. Good flotation operation demands properly sized grinding mills and steady feed to the flotation circuit.

Jan 1, 2009

By Felipe P. D. Lopes, Jr. dos Santos, Sergio N. Monteiro, Frederico M. Margem

"Continuous and aligned fiber composites provide the highest possible reinforcement for a polymeric matrix. In particular, the impact resistance is significantly increased in comparison with a low energy absorbed brittle polymer. For this reason, investigations have been carried out with both synthetic and natural fibers as a way to improve the toughness of polymeric composites. Among the natural fibers, ramie was not yet been studied for its reinforcement effect to make tougher polyester composites. Thus, the present work assesses the impact toughness of polyester composites incorporated with different amounts of ramie waste fibers.IntroductionIn most engineering and other technological areas, the use of materials associated with low energy processing conditions is gaining attention for the possible environmental benefits. This offered an incentive towards the substitution of natural renewable and biodegradable materials for the traditional energy intensive synthetic materials [1]. Natural fibers from both origins: animal, such as silk and wool, and vegetable, such as cotton and jute, are typical examples of those environmentally friendly materials. Low cost and highly reduced processing machinery wear are important advantages of the natural fibers over the most common synthetic ones such as glass fiber and nylon. For these reasons, polymeric composites reinforced with natural lignocellulosic fibers have nowadays been the subject of investigation [2,3].The mechanical strength is one important property of lignocellulosic composites to access the possibility of uses like structural materials for building parts such as doors and panels, as well as furniture. In this case, mechanically strong fibers like sisal, jute, curaua and ramie [4-7] are most convenient. Moreover, the relatively low fiber/matrix interfacial shear stress in these composites is associated with higher impact energy. In fact, a greater energy has to be expended for the rupture of a weak interface. The many cracks that are formed by impact tend to branch during the fiber pullout from the matrix [8]. A larger number of cracks correspond to a greater fracture surface and consequently higher toughness."

Jan 1, 2008

By M Doran

The Olympic Dam mine utilises 1.1 m to 1.4 m diameter raise bores for generating the initial slot void for most production stopes. Slot raise bores generally span two development levels ranging from 30 m to 50 m in height. Raise bores are reamed upward and typically leave a cap of rock equivalent to two times the raise bore diameter on the drill level (minimum 3 m). This provides safe access over the cap for subsequent production activities. It is therefore critical to ensure robust falling object protection for personnel accessing underneath, and in the vicinity of the raise bore void on the lower level. Recently, a number of mesh failures have occurred at Olympic Dam as a result of falling rock from the underside of the cap and raise walls. In addition, as Olympic Dam transitions to deeper and more challenging ground conditions, rockfall-off onto the raise bore protection mesh is anticipated to increase in frequency. This paper discusses the evolution of raise bore protection mesh used at Olympic Dam and presents results from recent site-based drop testing. This impact testing was carried out using a built for purpose object to replicate point loading and shear failure of mesh wires. Testing was also carried out on an improved mesh design which utilises two layers of Geobrugg high-tensile MINAX mesh. Results from the drop testing suggest an improvement in performance of the raise bore protection mesh is realised with the updated design.

Mar 29, 2023

By K. Esmaieli

ABSTRACT We conducted a series of numerical experiments to investigate the influence of rock mass foliation on impact-induced damage on ore pass walls. The 2D Particle Flow Code was used to simulate three distinct rock masses surrounding an ore pass, characterized by foliation angles of 60°, 90°, and 120° (clockwise from horizontal). Subsequently, we projected a rock fragment against the ore pass walls at a constant impact angle and velocity. The resulting damage increase

Jan 1, 2014

By Bibhu Mohanty, Sheng Huang

Accurate measure of fragment size distribution is a key objective in all blasting and crushing operations. Several generic distribution functions have been devised to describe the degree of fragmentation for the representative range of fragments from selected measurements. The application of four distribution functions, i.e. Rosin-Rammler, Swebrec, Grady and Gilvarry, in describing fragment size distribution of impact-induced fragmentation of a limestone rock has been investigated. A modified Hopkinson Pressure Bar experimental set-up is used to control both impact velocity and energy input into the target rock. The feed size in the sample holder is varied from 6.35mm to 15.88mm in three ranges and the impact velocity up to 14m/s. The size distribution in the product is determined by sieve analysis for a range of impacts. The experimental results are fitted to the four distribution functions to examine their relative accuracy and reliability.

Jan 1, 2016

By Dave Pal

El impactador de rocas proporciona un método eficiente, económico y seguro para triturar rocas de dimensión excesiva como una alternativa a la voladura secundaria. En ese sentido, el presente artículo resalta las ventajas del empleo de los impactadores de roca con énfasis en las aplicaciones en tolvas subterráneas y puntos de descarga, en base a la experiencia que Teledyne Mining Products tiene con dichas máquinas desde 1968 en minas cuyas rocas poseen alta resistencia compresiva.

Nov 1, 1981

By Renan da Silva Ramos, Caio da Silva Pontes, Leonardo Paraíba Cidrão, Alexandre Bestwina, Vilson Wenis dos Santos Belle, Gabriel Flintz Fraga Marques

A resposta a impacto balístico dos compósitos de alumina com polietileno de ultra alto peso molecular (PEAUPM) com diferentes concentrações relativas de alumina foi investigada. Os testes de impacto foram realizados em velocidade subsônica usando sistema de ar comprimido. As amostras de melhor desempenho foram as A00 e A90, sendo fraca a adesão interfacial entre a matriz de PEUAPM e as partículas de alumina. A profundidade de penetração (PP) em madeira MDF, protegido por um disco feito do compósito, diminuiu com o aumento da concentração de alumina no compósito.

Mar 1, 2019

By Cristina da Paixão Araujo

O planejamento de lavra de curto prazo tipicamente confia em amostras obtidas de furos de desmonte em uma operação de lavra a céu aberto. Essas amostras podem conter grande erro de amostragem. O objetivo deste artigo é avaliar o impacto do erro de amostragem na recuperação de lavra. Para comparação, foi utilizado banco de dados Walker Lake exaustivo considerado como a distribuição real dos dados. A metodologia consiste na obtenção de amostras a partir dos dados exaustivo, em um espaçamento regular de 5x5 m. Em seguida, o erro de amostragem foi adicionado às amostras. Posteriormente, as amostras foram utilizados para estimar os blocos e classifica-los como minério ou estéril. Quatro cenários com amostras com 0%, 10%, 20% e 30% de erro relativo. A recuperação de lavra de cada cenário é comparada com a real distribuição dos dados. Além disso, o erro de classificação do bloco é avaliado para os quatro casos. Os resultados mostram que problemas na amostragem e no protocolo de preparação de amostras pobres afetam a curva teor tonelagem e a classificação dos blocos em minério e estéril.

Aug 8, 2018

By Thiago de Morais Gomes

Este trabalho trata-se de uma pesquisa bibliográfica com o objetivo principal de analisar o impacto das diferentes propriedades que podem ter as pelotas de minério de ferro e seus comportamentos no processo de produção de gusa no alto-forno. São destacados conceitos e definições gerais sobre o tema, bem como exemplos de processos. Para tanto, foi realizado uma seleção bibliográfica em vários artigos, livros e portais da Internet, cujos autores subsidiaram na compreensão dos principais assuntos relacionados ao tema. Concluiu-se que existe a necessidade de se realizar um processo de seleção de pelotas com determinados tipos de propriedades para a produção de gusa no alto-forno, com isso reduzindo a quantidade de escória e aumentando o desempenho do alto-forno. Também existe a necessidade de novos estudos sobre este tema devido a escassez de artigos e livros que tratam especificamente deste para a siderurgia.

Aug 16, 2017

By Germán Mallén

Como parte de los estudios línea base realizados por MWH Perú S.A. para el proyecto aurífero Chucapaca de las Canteras del Hallazgo en el distrito de Ichuña de la región Moquegua, Perú, se investigó el origen de boro, alta salinidad y otros componentes que perjudican la aptitud de los ríos Ichuña y Tambo para irrigación y otros usos. En este sentido, se encontró que la calidad de agua es perjudicada principalmente por altas concentraciones de sodio, entre otros, precipitándose como hidróxidos de estos metales debido al pH neutro en el río. En ese sentido, el presente texto describe la relación de este impacto químico con los manantiales entre el Cerro Chucapaca y el cañón del Río Ichuña/ Alto Tambo, ubicados al Norte de Moquegua, donde presentan la característica distribución de diferentes tipos de aguas volcanogénicas sobre un sistema de convección hidrotermal de agua meteórica profunda reciclada, calentada y movida por una cámara magmática andesítica que aporta calor y gases.

Sep 21, 2013

By Juan Anes, Omar Godínez, Adrián Tolentino, Mario Franco

Como aplicación práctica de las herramientas hidrodinámicas de flotación desarrolladas por Flottec, McGill y otros investigadores, el objetivo del estudio fue crear, para Minera Fresnillo, una herramienta preliminar de control de procesos, a nivel de la primera celda de la flotación primaria del circuito de plomo, con el fin de expandirla luego a toda la planta. El trabajo determinó ecuaciones matemáticas que describen las relaciones entre las variables de proceso e hidrodinámicas para aumentar la recuperación de plata mientras que disminuye la cantidad de insoluble al concentrado. Se desarrolló usando diseño de experimentos con tres variables (nivel de espuma, adición de espumante en ppm, y flujo de aire en cm/s) para observar los cambios en la recuperación de plata y plomo.

Sep 20, 2019

By David Ramírez

"Dentro del proceso de optimizar la fragmentación del mineral por voladura, el principal objetivo es determinar el impacto que tendría la incrementación de las partículas medias y finas sobre la extracción de cobre en elmineral ROM, (Run of Mine), que actualmente constituye una de las fuentes de producción por lixiviación en la Sociedad Minera Cerro Verde. En ese sentido, el presente trabajo describe la cantidad de cobre que aporta el mineral ROM a través de su optimización en el proceso, así como el impacto económico que tendría a futuro. Para ello, se utilizan los resultados de las pruebas para los módulos experimentales 12 y 13 desarrolladas entre 1998 y 2000, y la validación preliminar del sistema de análisis granulométrico por fotos (Split Desktop) desarrollado en julio del 2002 para así otorgar validez a los resultados fotográficos de granulometría reportados para las diferentes pruebas de voladura. "

Jul 31, 2003

By Ronald Ticona, Jair Alarcón

Generalmente, la operación de perforación y voladura se gestiona de forma independiente a los resultados de la planta de procesamiento. Por lo tanto, la segmentación técnica para determinar los diseños de perforación y voladura del mineral no incluye las propiedades de la roca de la planta de procesamiento, como el Bond Work Index, Axb, Drop Weight Index u otros. El año 2021, en la operación de una mina de cobre del Perú, de acuerdo a su plan de minero tendría una dureza de molienda SAG significativamente mayor, lo que impactaría directamente en la producción de concentrados de cobre. Se volvió necesaria la búsqueda una estrategia integrada entre mina a planta para mantener los niveles de producción.

Sep 30, 2022

By Alexi Delgado, Carlos López

Los pasivos ambientales mineros (PAM en sus siglas en Perú), constituyen uno de los mayores problemas en el Perú, ya que son causa de conflictos sociales por el impacto que generan en el medio ambiente, especialmente en la calidad del agua, la metodología escogida para realizar la investigación fue Grey Clustering la cual brinda una alternativa para evaluar la calidad de agua de manera integral considerando la incertidumbre dentro del análisis, específicamente, se utilizó como mecanismo de evaluación para determinar la calidad del agua de la cuenca del río Llaucano la función de peso de blanqueamiento triangular del punto central, mejor conocida como CTWF (center-point triangular whitenization weight functions), que es un enfoque del agrupamiento gris.

Sep 29, 2023

By Kássio Nogueira Cançado

O objetivo desse trabalho é analisar a eficiência de um forno de aquecimento de barras quantificando o impacto de paradas não programadas na linha de produção. Para isso foram realizados 3 balanços energéticos durante um período de 7 horas. O primeiro balanço foi realizado em um intervalo com registro de paradas, o segundo no período subsequente sem ocorrência de paradas e o terceiro englobando o período total produção analisado (balanço 1 + balanço 2). Tomando-se como referência o resultado do balanço energético sem ocorrência de paradas temos duas situações: a eficiência do forno no período com ocorrência de paradas apresentou uma queda de 27% em relação ao período sem paradas, em relação ao período total de produção a redução foi de 20%. Esses resultados permitiram fazer a projeção, que se a produção ocorresse sem paradas, o potencial de redução seria aproximadamente 15% no tempo total de produção com uma redução de aproximadamente 23% no consumo de combustível. Portanto, destaca-se a importância de um plano de manutenção eficiente, com o objetivo de minimizar o tempo de linha de produção parada e o consumo de combustível, além de aumentar à qualidade aquecimento a vida útil do equipamento térmico.

Oct 30, 2017