Search Documents

By Scott Dupont

Due to the scarcity of miners, and the necessity of decreasing the cost of mining, the Phelps-Dodge Corporation, Stag Canon Branch, at Dawson, [ ] New Mexico, decided to try, by various methods of mining, to increase the tonnage of coal mined per man, per day. With this in view, they first tried mining on a 250-foot face, maintaining the track at the face and using six to eight men shovel- [ ] ling. These men were able to aver age from ten to twelve tons each per, day when they were loading, but with

Jan 1, 1926

By F. C. Miller

The briquetting of fuel is an industry centuries old and has followed the hammer and tongs method of making use of any by-product fuel by the simple process of sticking the mass together with anything that will stick. If fuel briquetting, as an industry, once in the lead over coal mining, had kept pace by introducing science, there would not at this time be the mad scramble to look up the fuel briquette family tree and accept every new method as fruit without the cultivation that makes fruit worth while. Cultivation of industry is a mass of evidence showing a tremendous expenditure of money for mistakes paving the way to success. Cultivation of the mining industry is practiced by nations and low temperature distillation and fuel briquetting will in the near future receive the same consideration. Fuel briquettes were used as a winter fuel in Ireland and Scotland before the discovery of America' or the introduction of coal as a fuel to replace briquettes in Ireland. This industry was practiced by the peasants who collected peat from the bogs and cut it into brick-shaped blocks, which were set up to dry in the sun and stored under cover for use or for sale. Demand for peat briquettes led to competition that resulted in a highly refined fuel. In some localities the peat was ground and purified from the earth by washing before placing in presses to squeeze out the excess moisture and form a block of peat about four inches thick. These blocks, after standing in the sun for a few weeks, were cut into briquettes about four inches square by twelve inches long and moved under cover where they remained until thoroughly dry. In this form peat makes an excellent fuel with considerable heat, small amount of smoke while burning, and tough enough to stand hauling in carts and boats without breakage. Slack from domestic coal, non-coking and anthracite, has until recently commanded a very low price and the attention of briquette men has centered on ways and means of preparing this class of fuel for the market in the form of briquettes. Industrial plants with automatic stokers have taken kindly to cheap slack or slack that was cheap because the price has been boosted to a figure where the cost of slack plus the cost of binder and operation makes fuel briquettes somewhat expensive. However, fuel briquettes are being turned out in commercial quantities to compete with prepared lump coal and the demand is in favor of the briquette man. Science has been called to aid the briquette and it is possible to purchase a complete coal briquetting plant that will turn out between four tons per hour and thirty tons per hour of briquettes at a calculated cost per ton to cover material and every item down to insurance on the plant. A few briquettes are being ' made with a mixture of- Portland cement and pulverized coal, where this class of briquette is cheap in the making, there is the increased amount of ash due to the cement to contend with and the briquette is not one that can compete with lump coal. Most binders have a fuel value, such as coal tar, pitch, asphalt residium, flour, glue and secret binders. Most briquettes are of an egg shape, weighing between one and one-half ounces and five ounces, pressed to form with a pressure varying between 1,000 pounds and 2,500 pounds per square inch. This' pressure, together with the binder, make a lump of fuel harder than most grades of soft coal. Most of the briquettes are free from pitch odor, and any tendency to leave a trace of the binder on the fingers, easy to handle, quick to, ignite, high in heat value and capable of indefinite storage without any change. Evaporative efficiency of briquetted fuel in stationary, marine and locomotive boilers has proved that a great many low-grade coals can be fired successfully in the briquetted form, where the same fuel without briquetting failed to give boiler rating.

Jan 1, 1923

[President Vernal Mortensen Vice Presidents Colorado Charles W. Margolf Montana Art K. Neill New Mexico Robert Diederick North Dakota James A. Brown Utah Bernard Bernstrom Wyoming John T. Goodier Secretary-Treasurer Doris G. Finnie Executive Board Roy Coulson A. Z. Dimitroff Claude P. Heiner J. R. Kastler Loren V. Linville Shirl C. McArthur Ira E. McKeever, Jr. Ralph E. Moore Robert E. Murray V. O. Murray George A. Nugent John Peperakis John A. Reeves Max A. Robb Joe T. Taylor R. M. von Storch R. R. Williams, Jr. Robert W. Wilson Mike Zakotnik, Jr. Edward F. Ziolkowski]

Jan 1, 1982

By T. H. Butler

February 22nd, 1926. Mr. Benedict Shubart, 521 Boston Building, Denver, Colorado. Dear Mr. Shubart: At your request, am submitting to you several suggestions for the amendment of our safety code which you felt should be kept up to date. As before, am advising you that these suggestions do not have the approval of the entire Safety Committee, but rather are the individual opinions of several members who have expressed their wishes in the form of letters to me. I am particularly indebted to Mr. Dan Harrington and Mr. Wm. Littlejohn for their assistance. Would recommend the following amendment a to the various sections. Section 1. Wherever possible trolley wires should be securely hung to roof or timbers at a distance of not less than five feet and not more than six and one-half feet above rail and six inches to one side. Spacing of hangers should be from 20 to 25 feet apart. Section 2. 500 volts D. C. should not be allowed in any installations. Trolley wires should not carry a voltage of more than 250 D. C. Pumps, mining machines and other small machinery units where A. C. power is used should not carry a voltage of more than 220. Large units, such as pumps, motor genera- tor set and hoists, may use a voltage of 2,200. When power cables to operate same are of armored construction, cables should be securely buried at all crossings. Section 4. Where power lines pass through door frames or stoppings they should be properly insulated with porcelain or rubber tubing. Whenever men get on or off man-trips in vicinity of trolley wires same

Jan 1, 1926

The 71st Regular Meeting of the Rocky Mountain Coal Mining Institute convened at the Steamboat Village Inn, Steamboat Springs, Colorado, and was in session at 10:00 a.m. The session was called to order by William W. Grant, Assistant to Manager of Navajo Mine, Utah International, Inc., Fruitland, New Mexico. Mr. Grant was delegated to open the meeting due to the untimely death of Past President A. F. Geiger. Mr. Grant introduced President Roy Coulson, President and Director of the Kemmerer and Gunn-Quealy Coal Companies, Frontier, Wymoing. His biography follows: Jan. 7, 1922 Born to Jean and Joseph Coulson, Ernest, Pennsylvania 1940 Graduated - Indiana High School, Indiana, Pennsylvania

Jan 1, 1975

By Geo. A. Murphy

MR. ARTHUR E. GIBSON (General Manager, Consumers Mutual Coal Company of Utah) : I suppose the reason I was called upon to read this paper was because I was at the mine for several years, but I have not been there for the past four years and the installation has been put in since I left. This article has been written by my successor-it follows: At the very urgent solicitation of your Secretary I have consented to prepare this paper descriptive of the spiralizing plant which is a part of the new steel tipple recently erected by the Spring Canyon Coal Company to serve its mines at Spring Canyon, Utah. I have been reluctant in giving this consent for two reasons: one of which is an excellent one, and the other isn't any good at all. First,, I find that it takes a long time to become familiar with the eccentricities of spirals-to get wise to their whims and peculiarities, and while this plant has been in operation for a number of months, something new seems to crop up nearly every time I see it, and -it would be impossible to describe all of these things even if I remembered them. The second reason is, purely personal. Among the many things I have learned by attending the sessions of the Rocky Mountain Coal Mining Institute is that if a man is not pretty sure of the ground he attempts to cover, he had better keep his mouth shut, because if he isn't right, he is dead sure to be called down by someone. However, as I will not attend the session, this feature will not hurt much, but it will make it necessary for someone else to read the paper and this will make it much better for those who are obliged to listen to it because I don't read English very well. To begin with I will say that what is said in this paper applies only to the plant under discussion as I have had no experience with any other plant. While spirals have been in use for quite a number of years, and there are some large plants in the East, their use has not been general, and I believe the plant at Spring Canyon is the only one in the United States west of the Mississippi River. The details of the plant were worked out by Mr. Thos. R. Stockett, General Manager of the Spring Can= yon Coal Company; it was manufactured by the Anthracite Separation Company of Hazelton, Penn., incorporated in the design and erected by the Link-Belt Company of Chicago, in connection with the balance of the tipple. It consists of five units. Each unit consists of a vertical wood column about 6 inches in diameter, and 9 feet 6 inches in height, around which the spiral is built. It is something like a triple screw conveyor, set vertically, with flights down which the coal and refuse travel by gravity in the process of separation. There are three of these flights, forming a sort of nest but about 7 inches apart, and they make 21 turns around the column in its length. These flights dip toward the column about 27 degrees; they have a uniform pitch downward of 31 degrees; they are 19 inches wide at the top (measured from the column) and taper gradually until they are about 9 inches at the bottom. They are not made with one continuous plate from top to bottom, but are made up of a number of plates. Some of these plates are slightly waved, others have small corrugations in them and still others are perforated with small holes, all of which are intended to accelerate or. retard the movement of the coal and refuse as they pass down, At intervals there are adjustable plates in the flights for the purpose of decreasing the maximum outside;

Jan 1, 1926

By D. C. McClure

MR. McCLURE: Mr. Chairman, you sprang a surprise on me; I really came over here for a good time. Gentlemen, I am not at all qualified to pose as an expert on pulverized fuel; I have merely been making some rather interesting observations, and unfortunately at the present time, a great deal of substantial data, the technical data, I don't happen to have with me; it is still in the process of being calculated, but I will be very glad to tell you some of the observations as I have made them, and in as truthful and complete a way as I can. The question of how we would handle fuel became a very pressing subject in this new Valmont electric plant, which is now under progress. We have studied the methods of burning fuel for a number of years on different types of stokers at the existing plants in Denver; we are burning it with a natural draft chain grate and with underfeed and with forced draft chain grates, and I am very frank to confess at the present time that I have no answer as far as stokers are concerned for a better solution of the problem of burning lignite. In other words, I could not tell you that this or that is a better type of stoker to use for that coal. However, to boil the thing down, after considerable trials, the underfed stoker was chosen as the one most adaptable for the utilizing of lignite fuel if stokers are to be used. In other words, the chain grate was put aside. I might say in support of the chain grate, the prime reason for which that type of stoker was condemned, as far as lignite goes, is the initial investment charge and the large maintenance which is involved.

Jan 1, 1923

Mr. Robert Von Storch opened the meeting at 9:00 a.m. Mr. Von Storch: As a matter of fact, I am very much surprised to see many of these faces. The way you were acting last night I did not expect to see so many but you are evidently all right, and survived. This morning's session is the ?RESEARCH DEVELOPMENT? theme, and our first speaker- (and we made a little switch) - is Jack Huebler, Associate Director, Research Institute of Gas Technology, Chicago, Ill. The switch is because of a projector problem. Jack Huebler was born in Michigan and received degrees in Chemical Engineering and Mathematics from the University of Michigan in 1941. He joined the Surface Combusion Corp. immediately and was with them for 20 years, rising to the head of research. He took leading roles in the invention and development of many heat using processes involving gas chemistry combustion and metallurgy. The now famous Erie Mining Taconite Pellet Process was one of these. He pioneered in gas carburizing and in the preparation and use of prepared atmospheres. He specialized in the heat transfer aspects of many new industrial metal heating processes. He left Surface 5 years ago to join IGT.

Jan 1, 1966

By Geo. A. Brown

This paper was written from conditions existing in the Cumberland Mines of The Union Pacific Coal Co., with my impressions and cause of same. These mines are located on a branch line of the 0. S. L. R. R., about sixteen miles south of Kemmerer, Wyoming. The mines are the property of The Union Pacific Coal Company with headquarters at Rock Springs, Wyo. There are two mines, No. 1 and No. 2, located about two miles apart in a seam of coal averaging about 16 feet thick which is split with a parting of rock from 4 feet to G feet from the bottom, averaging from 4 inches to 5 feet thick, mostly of soft fire clay, with an average pitch of 21 degrees to the west. The lower coal below the fire clay band being of a soft nature, much softer than the coal above it. The cover or roof next to the coal is of a massive sandstone formation from 4 feet to 60 feet thick while the floor of the seam is of a soft fire clay as far down as has been prospected. These mines are also of a dry and dusty nature, they generate lots of fire damp and are subject to fires from numerous causes. These mines were opened up in 1900 with five openings each, Main Slope, North and South Manways and North and South Aircourses driven parallel directly on the pitch of the seam which is fairly regular, entries being turned North and South at right angles off the slope about 300 feet apart. The entries were driven double 10 feet wide with chain pillars from 20 feet to 30 feet thick. The main entries are used for haulage and main intake, back entries for return aircourses. Rooms are turned on 50-foot centers and 20 feet wide, directly on the pitch Galvanized sheet iron chutes are used in the rooms. The slopes were driven down in No. 1 mine about 4,000 feet, in No. 2 mine about 5,000 feet where the cover would be about 1,400 feet in No. 1 mine and about 1,700 feet in No. 2 mine approximately. When a point about 2,000 feet on the slope had been reached with cover, 600 or 700 feet squeezing became noticeable on the entries and room pillars with slight bumps which extended clear to the upper entries of the mines and continued to get worse as the mines got deeper and with more cover as no pillars had been removed at this time. It should be stated here that faulty ground was found on the south side of No. 2 mine and on the north side of No. 1 mine, in some places looking like a fault of a down throw, some places like a want and other places like an erosion. The latter theory seems to be correct from prospecting and drilling. The mining of entries and rooms became more difficult with more squeeze and bumps of increased pressure which closed entries and aircourses and finally caused the lower workings of the mine to be abandoned. It was then decided to open up the entries from the 6th up, or approximately half way up the slope. The opening of these entries was started with the intention of extracting pillar coal but considerable danger was met with for the entries .were squeezed tight and when they were disturbed, bumps and squeeze conditions had to be contended with, also gas and fires due to the continued grind on the pillars due to overhead pressure bringing on friction which caused innumerable fires to start in the bottom coal. Bumps being so extensive at times as to close up aircourses for 500 or 600 feet, also discharge timber, coal and rock from the rib of slope and entries for hundreds of feet, dislodging tracks and throwing mine cars around just as if an explosion had taken place, filling places with gas and throwing dust into the atmosphere so that you could cut it with a knife. It became necessary to discontinue the use of black powder and naked lights entirely as a safety precaution. Permissible Powder Monobel No. 5 and Wico Electric Safety Lamps were installed. All coal was shot off the solid whenever it was necessary to shoot. ' In opening up these entries it was found that practically all of the weight was centered on room pillars up to the first crosscut chain pillars and barrier pillars between top of rooms of entry below and the one above which averaged 30 feet thick and in all practically 120 feet of ground. The rooms were mostly open from the first crosscut up to the face which showed that the points mentioned had taken the weight. It was found impossible in some of these entries to drive double entries again as the bumps and squeeze made it impossible to maintain them. This made ventilation quite a problem, small booster fans and flexoid tubing being used for ventilation until one entry could be connected with the one above which has solved most of our ventilation problems so far.

Jan 1, 1924

By W. R. Deeths

The Great Plains Coal Gasification Project is the first commercial scale grass roots synthetic fuels (SNG) plant to be built in the United States. The plant will be constructed in two phases, with each phase producing 125 million cubic feet per day of pipeline quality (970 BTU per cubic foot) substitute natural gas from lignite coal. The plant is located north of Beulah in Mercer County, North Dakota. The first phase complex, when completed, will cost about 1.2 billion dollars and will include all necessary process units, oxygen production, steam generation, coal handling and preparation, utilities and infrastructure. The plant will be owned and operated by, the Great Plains Coal Gasification Associates, a partnership consisting of the following companies: ANG Coal Gasification Company, Mid Con Corporation, Tenneco, Inc., Transco Energy Company and Pacific Lighting Co. The Project began in late 1973 with a Phase I feasibility study and site selection study. The feasibility study was completed in 1975, at which time Kaiser Engineers and C. E. Lummus, the two engineering contractors, proceeded with a Phase II conceptual engineering design for the project. The culmination of the Phase II work was the publication of a detailed scope definition and control estimate, which was to become the cost guideline for procurement and plant construction. Following an engineering slowdown period in 1979, due to continuing delays in regulatory procedures, detailed engineering effort was reinstituted in early 1980 and by mid-1981 was approximately 35 percent complete. The total home office engineering effort amounts to approximately 3.5 million man hours of work split between Kaiser Engineers and Lummus. These totals exclude the engineering effort expended by Lurgi of Germany in the process design. The gasification plant shares the site and certain other facilities with the Basin Electric Power Station. Among these facilities are the plant access railroad, peripheral drainage ditch and raw water supply system. In addition, the gasification plant will draw its power directly from the Basin main substation, and Basin will receive coal from the gasification plant, consisting of the coal fines which cannot be gasified in the Lurgi units. The overall construction program covers a period of approximately 44 months with mechanical completion and initial gas production slated for late 1984. Craft labor requirements amount to approximately 11.5 million man hours and the work force peaked in excess of 4,500 people. In anticipation of an early resolution of both Federal Energy Regulatory Commission ruling and Department of Energy loan guarantee commitments, certain work on the site was commenced during 1980. This work consisted of site rough grading, driving of piles, and erection of three of the plant auxilliary buildings. Orders and subcontracts were placed for compressors, pumps, electrical equipment, material handling equipment, piping, structural steel, boilers, oxygen plant and cooling towers. Over 40 major Federal, State and local permits were required. Among these were such diverse permits as: ? Soil conservation ?Railroad and pipeline rights of way ? Certificates of site compatibility ? Permits for structures in areas controlled by the ? U.S. Army Corps of Engineers ? Environmental permits required by the North ? Dakota Department of Public Health. The preparation of an Environmental Impact Report began in September of 1973. FPC (now FERC) guidelines and North Dakota special requirements were followed except that, at the time, the highly structured form of environmental impact statements we know today was not in use. We were required to develop a number of new sampling and evaluation techniques and reporting procedures at a time when the requirements were vague and often contradictory. In March 1975, field studies were completed and submitted to the Bureau of Recla¬mation, which then began to prepare its own EIS. Two years later, in May 1977, public hearings began on the Project. The hearings and public review of the report drew over 400 comments or questions. Responses o the comments were in¬corporated in a Final Environmental Impact Statement issued in January 1978. In March 1975, the original filing was made for an FPC Certificate of Public Convenience and Necessity which included: ? A technical feasibility study ? An Environmental Impact Assessment ? An Economic and financial feasibility assessment. An amended filing was submitted in 1976 to build the plant in two phases because studies then indicated that the cost of the plant had increased substantially. A second amended filing was submitted in 1977 to reflect the involvement of Peoples Gas (now Mid-Con Corporation) in the Project. At the time, it was believed that an FPC Certificate could be issued by December 1977. However, approval would be contingent on the U.S. Bureau of Reclamation having a complete Final Environmental Impact Statement for the Project. In 1977, with the formation of the Department of Energy, the FPC

Jan 1, 1984

[Adams, Dell H Consolidation Coal Co., 3300 One Oliver Plaza, Pittsburgh, Pa. Adams, Douglas K General Electric Co., P.O. Box 2331, Denver 1, Colo. Adams, Kenneth L Peabody Coal Co., 33 Carnation Dr., Belleville, Ill. Ahlborg, William Joy Mfg. Co., 580 Denver Club, Bldg., Denver, Colorado Albrechtsen, Ray H Mt. States Resources Corp., 2330 S. Main, Salt Lake City, Utah Allen, Dr. Harry C U. S. Bureau of Mines, Washington, D. C. 20242 Amerman, Richard W Utah Cons. & Mining Co., Box 155, Fruitland, New Mexico Anderson, G. A Walker Bank & Trust Co., 848 N 3rd E, Price, Utah Anderson, John S. Utah Cons. & Mining Co., 550 California St., San Francisco, Calif. Anderson, Robert Mine Safety Appliances Co., 1881 West N. Temple, Salt Lake City, Utah]

Jan 1, 1971

PRESIDENT MOSES: I thank you, Mr. Emrick. Mr. Shubart would like to supplement your paper with another article. SECRETARY SHUBART: My paper really should not supplement Mr. Emrick's paper, because I secured some data from him, I knew Mr. Emrick had had a great deal of experience in shearing and I thought he could give you some useful data. (Here Mr. Shubart read the following:) "For the past two years, there has been considerable discussion among coal mining men concerning the advantages of a shearing cut in addition to the undercut, in mine work. We have had a number of requests for information on sheared coal. We were asked questions like these: What percentage increase in lump can be obtained from sheared coal? What has been the experience of mine men who have employed the shearing cut? Is the shearing cut a means of increasing the lump content? If so, is it increased to such an extent as to warrant the installation of shearing machines? Upon investigation it was found that no one could give us any definite information on the subject as no one had weighed separately the grades of coal produced from' the shearing cut. With a view of getting this information first-hand, the Goodman Manufacturing Company built up a shearing machine to be used in experimental work only. The officials of the Troy Coal Company were eager to share in the expense of obtaining this information, so that in May of this year we shipped to their mines our first type 319 shearing machine. The Troy Coal Company operates a mine at Troy, Illinois, in the No. 6 seam and produces about 275 tons daily. The coal seam averages five and one-half feet in thickness. Previous to the arrival of the shearing machine the coal was undercut six feet deep by a' Goodman Shortwall Machine. To break down the coal required two shots in the entries and three in the rooms. The percentage of lump measured over two-inch screens, averaged 58.2 per cent. The conditions of the mine were very favorable for obtaining accurate weights on the amount of lump and slack coal run over the shaker screens. The shearing machine easily cut the entire tonnage of the mine so that all coal dumped into the railroad cars had been produced from a shearing cut, in addition to an undercut. Accurate records were kept of the railroad weights and front this data the percentages of lump and slack were computed. During the month of June the percentage of lump produced over two-inch shaker screens was 69.9 per cent. This result demonstrated that the introduction of the shearing cut had increased the percentage of lump twenty per cent. The entries were driven ten feet wide and the rooms thirty feet wide The shearing cut was made near the center of the face in all places. A hole was drilled in each rib and the coal shot down with one-half the powder required when the places had been undercut only. The coal was broken down to the back of the cut so that very little pick work was necessary to load it out. The benefits derived from the shearing cut were as follows: 1. Increased percentage of lump, thus increasing the average price of coal per ton. 2. Preservation of a tender top due to the decreased amount of explosive used. 3. Facilitated handling of coal by the miner thus increasing the tonnage per man. 4. Eliminated coal yardage in entries and crosscuts of ten feet or less in width for the reason that the shearing cut provides a loose end from which to shoot the coal. This applies to the union fields only, as the non-union mines do not pay for coal yardage. Based on a price of $2.50 for lump coal and $1.25 for slack coal, the average price per ton was increased

Jan 1, 1926

[Page Officers of the Institute 5 Minutes of the Twenty-third Meeting 9 Preservative Treatment of Mine Timber at Primero Mine-F. T. Baker 10 Discussion of Treatment of Mine Timber JA Shearing Coal-John H. Emrick 19 Discussion of Shearing Coal 22 Local Chapters 29 Experiments in Increasing the Production at Dawson, New Mexico-Scott Dupont 30 Discussion of Experiment in Increasing Production 33 Report of Safety Committee-Warren C. Bracewell 41 Bureau of Mines Defines a Gassy Mine 58 Mechanical Loading in Coal Mines-S. W. Farnham 59 Discussion of Mechanical Loading 65 Vocational Training-Discussion 69 Accident Rate-Discussion 71 Holmes Safety Association Chapter Plan-J. J. Forbes 73 Washing Domestic Coal-f. M. Charles 78 Discussion of Washing Domestic Coal 81 Safety Work in Western Mines-Discussion 86]

Jan 1, 1926

PRESIDENT MOSES: Mr. Hall, can you tell us something that will help our cause? R. DAWSON HALL: I did not want to tell anything; I wanted rather to say something, if. I said anything at all, about my impressions regarding the safety of the mines in the West. We heard yesterday how terribly dangerous they were, and I think that is due to the natural conditions. It is interesting to note that many of the developments of safety, which you will find all through the country, had their origin here in the Rocky Mountain States. It has not been because the Rocky Mountain States have been negligent - though, of course, they could have been more active - but it is becaues the conditions have been such as to make accidents more numerous. Rock dusting by mechanical means was used here before any other country adopted it, let alone the United States. It is true that rock dusting was started in England; but it was by hand, as it remained with the Victor -American Fuel Company to be the first to distribute rock dust by machines, and that is to the credit of Mr. Murray, who was the man that did the original dusting in those mines. It was at Delagua, they put up shelving and put dust on it; they used the adobe, and Mr. Pryde, at Reliance, very early in the game, put dust in the Reliance Mines, and some of the dust, I believe, is there yet but they can hardly find it for the new dust. That is not all. I believe it was first in the Utah Fuel Company's mine that incombustible clay was used for stemming, and in the East, where we were in the habit of using slack entirely, that was a big advantage. Another thing that the West has originated has been the wetting of the chain in cutting. The people in Alabama took a great deal of credit for having used that very early, but not as early as Mr. Brennan did at the Hanna Mine, he having used water on the cutter bits in 1913. Another development was that the Phelps Dodge Corporation were the first people to use, I believe in the United States, storage battery locomotives for main haulage, and while they didn't go ahead with that, so far as putting in power trucks and mining machines, until just recently-I think the Consolidation Coal Company in the East managed to get ahead of them in that development,-notwith-standing, they were the earliest to use it for main haulage. When I came through this section of the country, in 1912, I think it was, I went through the mines of the Union Pacific Coal Company. I was surprised to see the extent to which fire-proofing had been carried out in that mine, with regard to non-combustible brattices and overcasts, which were of concrete; even the boxes were covered with sheet metal. They were very far ahad of us in that respect; far, far ahead of us in the East, because the East has its favorable conditions in the fact that most of the lump in the mines is more or less wet all the time. Another safety provision which has been taken by the Utah Fuel Company, was shooting from the surface. That has not spread very much in the, East, but it has been used in Oklahoma and the middle West. I think there is plenty of evidence that the Western people have been thinking for themselves, in going ahead and' establishing new standards in Safety. One of the most unusual things is this Safety Committee, permanent Safety Committee of the Rocky Mountain Coal Mining Institute, which has been endeavoring here to find out the conditions under which safety cant best be practiced. I think it is those who venture to. criticize the West that) have to show that in the East there is not the spirit which has led the Rocky Mountain region to endeavor to reduce its very terrible death rate that really exists. It has to be faced and it furnishes a cause, an incentive; for further work toward safety; but none can deny that the desire of the western mining man has been to find

Jan 1, 1926

Pictured on these pages are the eight RMCMI Scholarship Award Winners for the 1990-1991 year followed by a brief profile. All winners, except John Nixon from Texas, were present as guests of the Institute at the June convention in Keystone, Colorado to receive recognition at the Welcome Session Monday, July 1, 1991. Each state vice president served as the host for the collegiate winner. In addition to receiving a plaque from the Scholarship Chairman, Dr. Donald Gentry, each winner receives $750 tuition credit for the coming academic year. As this is a continuing award, the winners from the previous year will receive another $750 for tuition credit in their senior year if they have maintained good academic standing and are recommended by their university. Criteria for these awards to be made in the spring annually is (1) That the award be made to a sophomore student and used as tuition during the junior year. (2) That the recipient be both a U.S. citizen and a resident of the state involved. (3) That the recipient have good academic standing, be pursuing a degree in a mining related field and have an expressed interest in Western coal as a possible career path. The scholarship program includes curricula other than those in the mining departments, but in the engineering disciplines, such as geology, mineral processing and metallurgy. Contributions to this worthy project are tax deductible to each individual RMCMI member or his firm. Through annual donations of $100 or more, the Patrons of the Institute fund the scholarship program and the various vice presidents contribute the travel expenses to conventions for these outstanding young collegiates. Donations to this worthwhile program may be made payable to RMCMI Scholar- ship and mailed to the RMCMI Office, 3000 Youngfield Street, Suite 324, Lakewood, CO 80215. Profiles of the 1991 Scholarship Winners follow. [ ] Walter Mengel III University of Arizona Tucson, Arizona Walter has attended the Mining Engineering program at University of Arizona since fall, 1990. He is a very diligent student and has recently been selected student mine foreman for the San Xavier Mine. Walter is secretary of the U. of A. AIME Student Chapter and a student member of the AIME Tucson Chapter. His career interests lean towards western coal mining. [ ] Matthew Madden Colorado School of Mines Golden, CO Matt carries a 2.619 cumulative grade point average in the Mining Engineering Department and ranks 194 in a class of 440. He is involved in a number of school activites such as a member of the Society for Mining, Metallurgy and Exploration, Inc., member of the Resident Hall Association, a Admissions Ambassador, and will be a Resident Hall Director for 1991-1992. Matt is also involved in wrestling and received a Colorado School of Mines Athletic Scholarship in 1990.

Jan 1, 1991

By Todd A. Myers

Forward Looking Statement Disclaimer This presentation may include forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including statements about the Company's vision, strategy, operations, growth, development and any other statements containing the words, "believes, " "expects, " "anticipates, " "plans, " "estimates, " and similar expressions. There are a number of factors that could cause Westmoreland Coal Company's actual results to differ materially from those indicated by such forward-looking statements including, but not limited to: general economic and business conditions; healthcare cost trends; the Company's ability to manage growth and significantly expanded operations; the ability of the Company to implement its business strategy; the Company's ability to pay the preferred stock dividends that are accumulated but unpaid; the Company's ability to retain key senior management; the Company's access to financing; the Company's ability to maintain compliance with debt covenant requirements; the Company's ability to successfully identify new business opportunities; the Company's ability to achieve anticipated cost savings and profitability targets; the Company's ability to utilize its tax net operating losses; demand for electricity; the effect of regulatory and legal proceedings; and other factors identified in the Company's most recent Annual Report on Form 10-K and subsequent reports filed with the SEC. The Company disclaims any intention or obligation to update any forward-looking statements as a result of developments occurring after the date such statement was first made.

Jan 1, 2008

[Page Officers of the Institute 5 Minutes of. Twentieth Meeting 9 "Cutter Bits"-J. H. Emrick 12 Discussion 16 Experiments in Roof Control-D. A. Stout 18 Discussion 28 Use of Permissible Powder in Coal Mining-H. Petersen 35 Discussion 38 Safety Measures-F. C. Miller 40 Automatic Mine Fan Signal-O. C.. Irwin 45 Discussion 46 The Operation of Gaseous Mines-Samuel Tescber 51 Discussion 55 "The Alamo Mine"-E. H. McCleary 60 Discussion 69 Mudite Discussion 71 The Mudite Machine-Ogden Iron Works Co 73 Reducing the Labor Turn-Over-Eugene McAuliffe 79 Coal vs. Oil Competition-Franklin P. Wood and Eugene Weber 81 Miscellaneous Discussion 86 New General Coal Mine Safety Orders of the State of Utah-B. W. Dyer 90 Discussion 93 Wednesday Afternoon Session 103 Comment on Utah Mining Law-Wm.Monay 104]

Jan 1, 1925

By R. Dawson Hall

*This paper was not read as it arrived too late. In the beginning of the last century "cottage industry" gave way to the factory system, and at present manufacturing that was once performed in homes is done wholly in factories. Division of labor came into being at the same time. In earlier years rarely more than a half-dozen men worked at the home of the master workman. Each group performed all the labor involved in changing crude material to the finished article, and many of the masters in a cottage industry themselves took the raw material and converted it by their own efforts into a highly specialized product ready for the market. Mining has in a degree moved in the same direction. But for the most part every man still has his own room. Pick miners in many places get their cars at the room neck, push them to the face, undercut their coal, drill their shot-holes, load and fire them, complete the breaking down of their coal, fill their cars, push them to the entry and also test their roof for weak spots, examine for gas, timber their rooms, bail them out and lay their own track. Mining is still in a way a "cottage" industry, only the cottage is a room in the mines instead- of a home. The men who gather the coal and take it to the tipple are in a measure like the middlemen who went from cottage to cottage and gathered the product of the owners or "masters", to use the term then prevalent. The change in ordinary industry from old methods to new came with machinery. The machines then introduced needed power for their operation, and distribution of power from house to house was too great a task for those times. Power could not readily be taken to machinery where water power only was available. It was necessary for the machinery and its workers to go to the power. Nor when steam was harnessed could every cottage have its steam engine. Compressed air and electricity had not arrived, and con-

Jan 1, 1922

By Warren C. Bracewell

At your request, am submitting to you several suggestions for the amendment of our safety code which you felt should be kept up to date. These suggestions are the individual opinions of the several members of the Committee who have expressed (heir wishes to me in the form of letters. I am particularly indebted to Mr. Daniel Harrington, Mr. Wm. Littlejohn, Mr. Warren Bracewell, Mr. James Dalrymple and Mr. Hugh McLeod. Would recommend the following amendments Section 1. Wherever practical trolley wires should be securely hung to roof or timbers at a distance of not less than five feet and not more than six and one-half feet above rail and six inches to one side. Spacing of hangers should be from 20 to 25 feet apart. (Adopted.) Section 2. 500 volts D. C. should not be allowed in any installations. Trolley wires should not carry a voltage of more than 250 D. C. nominal voltage. (Referred back.) Pumps, mining machines and other small machinery units where A. C. power is used should not carry a voltage of more than 220. Large units, such as pumps, motor generator sets and hoists, may use a volt- age of 2,200. When power cables to operate same are of armored construction, cables should be securely buried at all crossings, on haulage-ways or where men travel. (Adopted.) Section. 4. Where power lines pass through door frames or stop- pings they should be properly insulated with porcelain compound or rubber tubing. Wherever men get on or off man-trips in vicinity of trolley wires same should be secure1y guarded and should also be protected with a cut- out switch, same to be pulled before men are allowed to get on or off trips. (Adopted.)

Jan 1, 1926

By C. B. Huntress

"We have ourselves to blame in the steel industry for our condition." These words were addressed twelve days ago by James A. Farrell, President of the United States Steel Corporation, to his "comrades" at a meeting of the American Iron and Steel Institute. They carry a note of challenge to all industry, and particularly to the coal industry, where they point the way to the pressing need for operators everywhere to get their feet under one table. It is that note which I would stress to all producers. You have yourselves to blame for your condition. True, there are inter-district competition and competition of substitute fuels, but they'll always be with us, more or less, and the only sensible, sane course is to remove the evils within our respective districts, which can be done only by constructive effort along cooperative lines. It's the same story in Alabama, the same in Illinois and elsewhere. The larger number of the men gathered here are at the front, as it were, in the business of mining coal. They are the men who are doing a remarkable operating job. And naturally, the sessions of this annual meeting treat of news from the front, of technical problems. But, as in actual warfare, those at the front are often uninformed of developments in the rear. They keep on fighting without fully sensing the significance of a disaster at headquarters. You've played your eighteen holes today and evidenced the efficiency of your technique in the, production of coal. It is not amiss to take advantage of this moment, the nineteenth hole, to ponder over what it's all about. After all, what do improvements in the art of mining mean if business policies engulf you in red ink? To the extent that mechanization is a factor in increased overhead, which in turn increases the pressure to produce regardless of market demand, it only aggravates our troubles unless there is the controlling influence of coordinated effort.

Jan 1, 1931