Supplementary Report of the Safety Committee

February 22nd, 1926. Mr. Benedict Shubart, 521 Boston Building, Denver, Colorado. Dear Mr. Shubart: At your request, am submitting to you several suggestions for the amendment of our safety code which you felt should be kept up to date. As before, am advising you that these suggestions do not have the approval of the entire Safety Committee, but rather are the individual opinions of several members who have expressed their wishes in the form of letters to me. I am particularly indebted to Mr. Dan Harrington and Mr. Wm. Littlejohn for their assistance. Would recommend the following amendment a to the various sections. Section 1. Wherever possible trolley wires should be securely hung to roof or timbers at a distance of not less than five feet and not more than six and one-half feet above rail and six inches to one side. Spacing of hangers should be from 20 to 25 feet apart. Section 2. 500 volts D. C. should not be allowed in any installations. Trolley wires should not carry a voltage of more than 250 D. C. Pumps, mining machines and other small machinery units where A. C. power is used should not carry a voltage of more than 220. Large units, such as pumps, motor genera- tor set and hoists, may use a voltage of 2,200. When power cables to operate same are of armored construction, cables should be securely buried at all crossings. Section 4. Where power lines pass through door frames or stoppings they should be properly insulated with porcelain or rubber tubing. Whenever men get on or off man-trips in vicinity of trolley wires same