Search Documents

By R. C. Head

The investigation describe the history of copper in the seventties, as well as indicates the forecast the probable trend of the Copper Industry over the coming decade, and second, to stimulate some discussion on what is a somewhat controversial subject. At the same point, the period of surplus production from about 1972 to 1976-1977, during part of which some voluntary restriction on output maybe necessary. In consecuence, its a necessity for forward planning so that, by 1973-1974, new mines maybe developing to preserve the continuity of supply .

Nov 20, 1969

By Todd Hamilton

For mine closure, the prospect of treating mine drainage in near-perpetuity can be onerous – especially when flow rates are high. One closure option is to construct tunnel plugs within the adits to flood the mine and reduce discharge volumes. Flooding reduces oxygen access within the mine and hence ARD potential. It also reduces hydraulic gradients such that uncontaminated groundwater is not drawn toward open, acid-generating areas of the mine/orebody. Evaluation of the technical and economic feasibility of permanently sealing mine tunnels necessitates detailed hydrogeological and geotechnical investigations. The capital costs associated with tunnel plugs may be relatively high, and there are ongoing maintenance requirements, risk of significant leakage and even risk of catastrophic failure if improperly designed or constructed. In this sense, the paper point put the means available for assessing the liabilities associated with adits at project start up, and the options available for closure of existing adits to reduce long-term environmental liabilities.

Sep 12, 2005

By Dave Gilbert

The Antamina tailings beach is considered a fundamental design component, as well as a predictive control for phreatic surface control. In this sense, the paper point out the development and purpose of the tailings beach , as well as what future opportunities may exist. These present and future opportunities, include implications of the beach as an evaporative surface control thus reducing pond volume. These desireable outcomes include better control of the phreatic surface in a rockfill dam, and reduction of pond water volume.

Sep 21, 2013

By Jeremy Dowling

Mine dewatering is needed in most large open pits but the current practice of using in-pit vertcal wells is often chellenging to implement with good results. In order to address these challenges, SWS collaborated with FMI and innovated a directionally placed mine dewatering well workflow, based on well placement technologies from the Oil and Gas industry. The main aims of the program are to: Maximize hydraulic contact between the ore deposit and production dewatering wells and attain enhanced well production rates from the most important fracture sets. Move the well-heads to permanent areas outside of mine operating areas, removing or reducing the need for in-pit wells and allowing for sustained, prolonged pumping runs times.

Oct 21, 2015

By Joseph W. Ruetz

The paper describes the San Nicolas deposit, México. San Nicolás deposit is the most important VMS deposit discovered in Mexico to date, and a major deposit on a global scale. The discovery of San Nicolas resulted from the early recognition of VMS mineralization in a region not known for this style of mineralization, and the flexible use of appropriate exploration technology.

Apr 24, 2001

By Zaraí Toledo, Freddy Cáceres, John Hayes, Katherine McKiernan

Facing the rapid proliferation of informal artisanal and small-scale mining (ASM) in the 2000s, states with commodity-dependent economies pursued different strategies to enforce regulations to the activity. This article assesses the effectiveness of these strategies in increasing compliance. We leverage a view of policy effectiveness that considers the type of state-society relations a policy foster. We look at how different state-society relations impact the relevance a policy has to the subject it attempts to regulate. We argue that cooperation helps the state overcome its limitations on the knowledge of ASM and its limited institutional powers to enforce regulations alone. By learning about the activity in question and developing ties with the informal miners, the state can produce feasible regulation that is more likely to be followed.

May 10, 2023

By Rodrigo Rossi

Evaluating the field of artificial intelligence, it could be seen an increase on video analyses (or computer vision) usage, capturing information that would be difficult to get with other techs and reducing measurement error. After this research, it was presented to operational managers and the idea of applying it to monitor our industrial processes was born.

Sep 29, 2023

By Patrick High Smith

The paper summarizes the results from geochemical orientation and project surveys in North and South America. The orientation surveys were designed to characterize the soil gas response over buried mineralization and compare soil gas geochemistry with other geochemical exploration techniques for overburden. In addition to successful tests in orientation surveys, soil gas geochemistry has been applied in large-scale exploration programs for gold, copper, and zinc. The studies includes results from several of these surveys, including the Crandon Zn-Cu massive sulfide deposit in Wisconsin, USA, and the Ruby Star skarn Cu deposit in Arizona, USA.

Apr 24, 2001

By Marco Silva

Underground mines are complex environments that require continuous control and monitoring actions in order to have a safe and efficient operation. At Nexa, the goal of achieving "zero harm" promotes the constant search for in its operational processes. Currently, there are manual activities that reduce the agility and precision when working with information from inside the mine, using mostly radio communication and management by sight of badges as an operational standard. This project was born in the context of increasing the operational safety of underground mines, bringing gains to the entire process involving the underground.

Sep 29, 2023

By Marc Leduc

Since co-disposal technology promises to replace conventional tailings disposal methods at sites with high strip ratios or plentiful old dumps. While the mine waste needs to be relatively strong and low in fine material, and chemical compatibility must be assured, when these parameters are satisfied there are no other significant hurdles to its implementation. In this sense, the paper describe the resulting benefits range from substantial reduction in capital and operating costs to reduction or essential elimination of the short- and long-term liabilities associated with tailings dams are impoundments.Since tailings dam failures are arguably the greatest environmental liability and public relations problem in the industry, reducing the quantity of tailings managed behind dams is a worthy goal.

Jul 31, 2003

By Mustafa Onder

The paper point out that there are two méthods in the design of the long auxiliary ventilation systems. These methods can be summarized as constant fan spacing and constant fan size. If the fans are placed at the end of the duct, leakage will increase due to the high combined pressure.Also The program called SERIP can be used to examine the effects of positioning the fans at varying distances along the duct and determine the appropriate locations.

Jul 17, 2000

By Francisco J. Sotillo

"The paper point out the fundamentals of surface chemistry used on the design of this organic polymer, and its effect on the rheology of clayishphosphatic slurries in comparison with other available dispersants. Reducingthe viscosity of clayish slurries increases phosphate particles settling rates, and decreases value losses during desliming using gravitational forces. Also presented the improvement of desliming using centrifugal forces by achieving better separation of the ore from the slimes during cycloning."

Jul 31, 2003

By Emilio Navarro

XML technology can be used as a standard to transfer information from a relational database to any system that relies on such information. There have been many proprietary methods to perform this information transfer, However, none of them was either able to talk to each other or exchange information in a transparent way. This paper describes a system that will allow for a transparent exchange of information not only between a Web browser and a Web Server but also a stand-alone application and the same Web Server. First, the autor summarize the Internet technologies that support the possibilities. Then the autor outline the tasks needed in order to take advantage of these technologies. Finally, it is suggest a few applications that could take advantage of this system.

Aug 25, 2002

By Andreas Rompel

New technologies and applications in exploration and mining are the result of R&D. As the acronym indicated, R&D is separated into Research and Development. They represent different stages in the progress of the development of a new application.

May 1, 2008

By Edmundo Alfaro

"The paper point out about on the use of ion exchange resins for adsorption of gold from ammoniacal thiosulfate solutions. In this sense, the gold can be recovered from ammonium thiosulfate solutions with strong base resins. The amount of gold loaded onto the resin in a batch process is a function of gold concentration in solution, amount of resin, volume of solution, copper and competing ions concentration in solution. Thiosulfate concentration in leaching solution has influence on gold loadings onto resins; in contrast, ammonia concentration in solutions has no influence on gold loadings. Gold seems to be loaded onto the resin preferentially over copper - thiosulfatecomplexes and also over thiosulfate ions. Polythionate ions strongly compete with gold and copper thiosulfate complexes for resin sites. This causes reduction on gold and copper recoveries from the leaching solutions. Even more, polythionates are produced in leaching solutions when thiosulfate is oxidized by the action of both copper and oxygen. "

Jul 31, 2003

By Dan W. Bench

PCBs are hazardous not only to human health and the environment but also to the mining industry because of potential worker exposure and improper disposal liabilities. In this sense, the paper point out the identification, management, and proper disposal of pcb-containing electrical equipment used in mines. Also it point out alternatives to PCB dielectrics, storage, and disposal. The use of PCBs in mines has been documented during U.S. Environmental Protection Agency Region 8 mine inspections and it used as dielectrics in transformers, capacitors, and fluorescent light ballasts are common throughout industry worldwide.

Sep 14, 2009

By Jan Klein

"The last decade of the 20th century saw the development of one of the last missing geophysical tools for mineral exploration: the Airborne Gravity Gradiometer. It is possible that Airborne Induced Polarization, one of the stillelusive systems, will make its debut in the next few years. In this sense, the paper point out are the most recent and important improvements in geophysical technologies for mineral exploration. Airborne techniques are followed by the systems used on the ground and in boreholes. New equipment and data processing and modeling software are referred to. Brief remarks are made about developments that can be expected in the years to come, these will be mainly focussing on deep search in rugged and conductive terrains. "

Apr 24, 2001

By J. B. Greenwood

The paper point out some reasons why contract mining should not achieve the same success in Latin America as it has in Australia. In this sense, any reasons are: the size of operation, mining industry employees bonus scheme, the privatization of nationalized mining assets, general sales tax and the mining unions. Therefore, great deal depends on the attitude or "mindset" of a company's employees. lt is strongly my view that the attitude with which a contractor approaches a job will give rise to a superior mindset amongst its employees when comparad to those from most mining companies. The value of this cultural difference is significant and should never be underestimated. lmportantly, it doesnot only manifest itself in a more productive workplace: it is invariably the case in Australia that the safety achievements of contract miners are superior to those generally expected from the mining industry at large.

Oct 6, 1999

By T. L. Gibbs

The paper describes the role of the State in the general regulation of the mining industry in the Republic of South Africa as well to refer briefly to some modern technological aspects in South American gold mining practice. In the same way, the paper categorizes it geographical, historical, the mineral and mining laws, lease consideration and taxation, the department of mines, atomic energy board and modern practices in the gold mining industry.

Nov 20, 1969

By Murray Hitzman

Central and southern South America contain a variety of sediment-hosted base metal deposits including shale-hosted Zn-Pb-Ag, Irish-type Zn-Pb-Ag, BrokenHill-type Pb-Zn-Ag, Mississippi Valley-type Zn-Pb, and sediment-hosted stratiform Cu deposits. In this sense, the paper point out Potential for sediment-hosted base metal deposits in Central and Southern South America.

Apr 24, 2001