Search Documents

By S. W. Farnham

Those who remember the years of patient effort and the slow results obtained in the first introduction of electrical coal cutters and locomotives will, I think, admit that mechanical loading of coal is unquestionably being established at a much more rapid rate than any previous application of machinery to reduce manual labor in mines. There are many operators who consider the progress of the loaders today as slow, but considering the number of years it took to thoroughly establish electrical coal cutters and locomotives, and comparing it with the short time that the mechanical loader has been on the market, and the results that have been obtained today, they will admit, I think, that the progress of the latter is much more rapid. It is about 35 years since the advent of the electrical coal cutter and electric locomotive. Their use has brought about these improved conditions, increased tonnage per mine and other features, which are of assistance to the installation of mechanical loaders. The management and the technical staff in practically all of the American mines are trained in the use of electrical machinery and understand its operation, care and maintenance. . There is frequently, a surplus of electrical power and wiring available to take care of the small requirements of the electrical loader. The mechanical loader, therefore, starts today with the ground prepared for it. Those manufacturing companies who have had years of experience in the design and construction of mining machinery, know in a large measure what to incorporate in their designs to make the parts of the new type of machine effectively strong and to operate with efficiency under the severe conditions encountered in mining service. All these advantages greatly assist the success of a new type of machine such as the mechanical loader. In spite of these advantages, however, there are bound to be some failures. All new types of loaders have to be developed. We hear of some that are a success and some that are set aside. The field of application of each type and its limitations first must be determined by actual operation. The earlier loaders had to be changed and improved in design as weaknesses developed. Not all of the new types of coal loaders have been built by mining machinery manufacturers of long experience, and the lack of experience in this line is responsible for some of the early failures. The coal mining company staffs and also those of the loader companies had to learn what the operating factors were that made mechanical loading a success. The difference in results obtained by loaders in different properties under similar physical conditions indicates that the mine management is a very large, if not the major factor, affecting the efficiency of mechanical loading. Many articles have been written on the question of loading. The subject has been quite fully discussed at recent coal meetings and in the technical press. It is not always as easy or simple a matter to form conclusions as may first appear as to one's own particular loading problem. Mechanical loading is a comparatively new art, and many companies while claiming that loaders are quite successful, do not have an accurate line on the actual saving they are affecting. Many of them have only a few of the factors taken into account in their costs. Many loaders have been generally bought without very careful consideration given to all details and except where extremely favorable conditions prevail, failure resulted. When contemplating the installation of mechanical loading, one naturally desires to select the type of loader that will, fit his mining conditions. The things

Jan 1, 1924

Jan 1, 2008

At 5:30 p.m. a social hour was held for all RMCMI registrants on the lawn area south of the Gondola Lift House. This was followed by a western steak fry and dancing to the country western band, "The Cat's Night Out". MORNING SESSION Tuesday, June 29,1982 RMCMI golfers came out in force for a shot-gun start of the Championship Golf Tournament at Vail Municipal Golf Course which began its first session at 7:30 a.m. followed by a second at 1:15 p.m. The tournament was headed by William Carpender, chairman and his committee members Gary Bennewitz, Jr. and Gene Christmann. RMCMI members were treated to early morning rolls and coffee in the Conference Center preceding a showing of the RMCMI slide/tape program on enhancing the image of coal mining, by telling the story of the Institute. Following this, the meeting was called to order by President McKeever at 8:30 a.m. when he introduced Mr. Carl Terzian who presented a workshop entitled "Sure You Have an Image - But What Kind?". MR. McKEEVER: Good morning Carl. I see you're ready to address this bright and busy tail audience. One of the things that I really want to point out this morning and I knew we would have a second chance with Carl Terzian but Carl is someone that will leave a good lasting impression on you and what he will hopefully be talking about, as I remember, is that what he's saying here can be used personally, or for company, or for the Institute, or anything else on image. Carl is Chairman of the Board of Carl Terzian Associates. He is a prominent author, lecturer and consultant. He is headquartered in Los Angeles and he's nationally known: governmental affairs, man¬agerial development and executive speech training and has served nearly four hundred clients since 1969. Each year he travels nearly 300,000 miles to address conventions, conferences and sales and management meetings as a motivational speaker. Carl has been speaking professionally for more than twenty-five years. He was graduate magna cum laude 1957 from the University of Southern California where he was elected Phi Beta Kappa and student body president. He later served as State Department goodwill ambassador for President Eisenhower; public relations director for Lutheran Hospital Society of Southern California; dean and professor of political science and speech at Woodbury University and public affairs director for architect Charles Luckman. He has been honored for his civic and philanthropic and professional accomplishments by the Congress and State Department, California Assembly and Senate, City and County of Los Angeles, Her Majesty the Queen of England, and six times by the Freedom Foundation of Valley Forge. Carl, welcome to our Coal Mining Institute and it's been kind of a historical situation on Tuesday morning that we will probably have people straggling in after that wonderful steak fry that we had last night. You're very welcome to come and takeover the command. MR. TERZIAN: Thank you very much Ira. This gives me an opportunity for those who were in my luncheon audience yesterday to again thank you for giving me the opportunity of that platform and for the very kind comments that were made following the address. Those of us who had been working for some months with Ira, Charlie, Betsy and many

Jan 1, 1982

Past President Shirl McArthur opened the meeting at 9:30 a.m. He called on the Auditing Committee to give its report. Stan Shubart, who checked the financia1 report of the treasurer, read the report. He asked that it be approved. A motion was made, seconded and carried. Shirl thanked all the committees for an excellent job in making this meeting a most successful one. Special thanks to Park Lamborn for a fine program and to Gussie Whiteside for all her efforts in behalf of the Institute. An increase in salary was voted for the secretary-treasurer. It was decided to return to Vail for the 1979 convention. The Resolutions Committee was called upon to give its report. Roy Coulson, Chairman, submitted the following: (I) RESOLVED, Whereas, in the year since the last convention of The Rocky Mountain Coal Mining Institute, the Institute and the coal mining industry have suffered the loss through death of the services of: O. F. Bridwell C. L. Book O. F. Lewis Frank Kolar O. H. Littrell L. B. Phillippi Weston L. Potter George C. Trevorrow

Jan 1, 1978

CHAIRMAN ALLEN: Gentlemen, I have been asked to call this meeting to order by Mr. Marchant, and am acting here temporarily in the absence of Mr. Nyman, who is unable to be with us. Mr. Nyman sends the following telegram: "Will not be able to be present at the Institute meeting. Serious illness of my father has made it necessary for me to remain in Salt Lake Please arrange substitute. Very sorry." In addition to having to pinch-hit for Mr. Marchant and President Nyman, I am here representing the Governor of the State of Colorado also who is unable to be here. The Governor of Colorado is a very busy man. His appointments are made months ahead. We only got word of the possibility of his addressing this meeting yesterday morning, and I went over to the Governor's office this morning to see if there was any possibility of getting him here, but he had been booked up for two months ahead of this time to appear at the convention of the Veterans of Foreign Wars in Trinidad, Colorado, where he is today, and which makes it impossible for him to attend this meeting. I know that he would have liked to have been here with you, as there is not any doubt but what the Governor of Colorado has the interests of the mining industry at heart. This was manifested last week when he called a meeting of representative men of the different lines of industry so that we could arrive at some results and some arrangements to see if it was possible to get at the bottom of the condition causing our bad times, and the appointment of commit- tee groups to find out what these problems were and to see if they could get any possible solution to them. The meeting was adjourned with the suggestion that those who were present would among themselves select such committees to investigate the conditions of the coal mining industry, and offer suggestions for betterment.

Jan 1, 1938

Earl W. Baker W. P. Bigler Lyman Fearn Leslie H. Johnson V. O. Murray Max C. Scheble Fred L. Smith who left the world better for their having lived in it . . .

Jan 1, 1986

G. B. Southward, Mechanization Engineer of the American Mining Congress, Washington, D. C., presiding. PRESIDENT HERRES: If you will come to order, please, we will get started on this morning's program. This morning's program takes up the matter of mechanized mining, particularly mechanical loading. There has been considerable progress made in the West with mechanical loading, but we are interested particularly in what is being done in other fields. We are particularly fortunate in being able to have with us Mr. G. B. Southward, Mechanization Engineer of the American Mining Congress. Mr. Southward has devoted his time for the past several years entirely to a national study of mechanized mining. He is the author of the Year Book published by the American Mining Congress, which is the authority for progress and development on mechanical loading. Mr. Southward has come here from Washington, D. C., particularly for this meeting. We have asked him to speak on the national phases of mechanized mining, and particularly on what is being clone in the East, since we are familiar with what is being done in the western field. I take great pleasure in introducing Mr. Southward. (Applause.) MR. SOUTHWARD: Mr. President and Gentlemen: Before starting on this gaper, I would like to express to all of you and to your President my appreciation in being asked to come here. It is a privilege. This question of coal mine mechanization, as you all know, is a big one. It is too big a problem for any one company to handle and it is through such meetings as these, through the co-operation of the various companies throughout the United States, that we have been able to make the progress that we have made. As Mr. Herres has said, I am not going to try to tell you gentlemen anything that is going on out here, in the West. You already know that yourselves. But he has asked me to give a brief resume of the progress that mechanization has made in the eastern coal states.

Jan 1, 1929

By Harold J. Rose

It is a real pleasure to attend another meeting of the Institute. This is partly because I am a Westerner by birth and training. As a young man I had personal experience with firing Colorado and Wyoming coals. The coal industry of the United States has done an outstanding job of producing coal. We can all be proud of the industry's record of continuously adopting technical improvements in coal mining. NEED FOR MORE EFFECTIVE COAL MARKETING However, it cannot be said that the industry has done an equally good job of marketing coal. There has been a rapid growth in U. S. population, and an even greater expansion of industrial demands for heat and power. Yet coal consumption for the past several years has been no greater than it was 40 years ago, in 1912 and 1913.

Jan 1, 1954

PRESIDENT MOSES: Mr. Hall, can you tell us something that will help our cause? R. DAWSON HALL: I did not want to tell anything; I wanted rather to say something, if. I said anything at all, about my impressions regarding the safety of the mines in the West. We heard yesterday how terribly dangerous they were, and I think that is due to the natural conditions. It is interesting to note that many of the developments of safety, which you will find all through the country, had their origin here in the Rocky Mountain States. It has not been because the Rocky Mountain States have been negligent - though, of course, they could have been more active - but it is becaues the conditions have been such as to make accidents more numerous. Rock dusting by mechanical means was used here before any other country adopted it, let alone the United States. It is true that rock dusting was started in England; but it was by hand, as it remained with the Victor -American Fuel Company to be the first to distribute rock dust by machines, and that is to the credit of Mr. Murray, who was the man that did the original dusting in those mines. It was at Delagua, they put up shelving and put dust on it; they used the adobe, and Mr. Pryde, at Reliance, very early in the game, put dust in the Reliance Mines, and some of the dust, I believe, is there yet but they can hardly find it for the new dust. That is not all. I believe it was first in the Utah Fuel Company's mine that incombustible clay was used for stemming, and in the East, where we were in the habit of using slack entirely, that was a big advantage. Another thing that the West has originated has been the wetting of the chain in cutting. The people in Alabama took a great deal of credit for having used that very early, but not as early as Mr. Brennan did at the Hanna Mine, he having used water on the cutter bits in 1913. Another development was that the Phelps Dodge Corporation were the first people to use, I believe in the United States, storage battery locomotives for main haulage, and while they didn't go ahead with that, so far as putting in power trucks and mining machines, until just recently-I think the Consolidation Coal Company in the East managed to get ahead of them in that development,-notwith-standing, they were the earliest to use it for main haulage. When I came through this section of the country, in 1912, I think it was, I went through the mines of the Union Pacific Coal Company. I was surprised to see the extent to which fire-proofing had been carried out in that mine, with regard to non-combustible brattices and overcasts, which were of concrete; even the boxes were covered with sheet metal. They were very far ahad of us in that respect; far, far ahead of us in the East, because the East has its favorable conditions in the fact that most of the lump in the mines is more or less wet all the time. Another safety provision which has been taken by the Utah Fuel Company, was shooting from the surface. That has not spread very much in the, East, but it has been used in Oklahoma and the middle West. I think there is plenty of evidence that the Western people have been thinking for themselves, in going ahead and' establishing new standards in Safety. One of the most unusual things is this Safety Committee, permanent Safety Committee of the Rocky Mountain Coal Mining Institute, which has been endeavoring here to find out the conditions under which safety cant best be practiced. I think it is those who venture to. criticize the West that) have to show that in the East there is not the spirit which has led the Rocky Mountain region to endeavor to reduce its very terrible death rate that really exists. It has to be faced and it furnishes a cause, an incentive; for further work toward safety; but none can deny that the desire of the western mining man has been to find

Jan 1, 1926

of our good friends and fellow -members: J. R. Gemmill J. J. Walsh J. F. Gieble M. O. Danford John E. Havens J. E. Edgeworth R. S. Rubincam Phil Lloyd E. J. Raddatz who left the world better for their having lived in it.

Jan 1, 1934

The Wednesday morning session was called to order by President Geiger at 9:30 a.m. He asked Stan Shubart to conduct the meeting. Stan thanked Loren Linville and Bill Grant for the excellent job they did in their assignments. He called on John Schmidt, Chairman of the Auditing Committee, to report on the financial statement of the treasurer. Mr. Schmidt read the data and asked for its approval. A motion was made, seconded and approved. Stan called on Joseph Berta, Chairman of the Resolutions Committee, who submitted the following resolutions: (1) RESOLVED: Whereas, in the year since the last convention of the Rocky Mountain Coal Mining Institute, the Institute and the coal mining industry generally have suffered the loss through death of the services of: Clement Audin, Jr. C. Herbert Clendenin Donald Haske William H. Hays M. J. Keenan Fred W. Koelling James Mecca Neil Robinson C. M. Shott

Jan 1, 1974

The Wednesday morning session was opened by President Max Robb at 9:30 a.m. He thanked the various committees, speakers and all participants in making the 67th meeting a success. He called on David M. Lane, Chairman of the Auditing Committee, to give his report. He read the report and asked for a motion to approve it. Motion was made, seconded and approved. (See Treasurer's Report on page 5.) Walter E. Duncan, Chairman of the Resolutions Committee, gave his report, which follows: RESOLVED: WHEREAS, since the last convention of the Rocky Mountain Coal Mining Institute, the Institute and the Coal Mining Industry generally has suffered the loss through death of the services and fellowship of: Kenneth G. Eaton Frank Field C. M. McConnell George H. Smith Glen E. Sorensen Harry Tibbs Carl H. Zietz NOW, THEREFORE, BE IT RESOLVED, That this Institute does give recognition to the contribution of these outstanding men to the Coal Industry and to the programs and objectives of the Institute, in recognition of which a copy of this Resolution shall be included in the permanent minutes of the organization and transmitted to their respective families.

Jan 1, 1971

Jan 1, 1977

President elect Ralph Moore opened the business meeting at 9:30 a.m., he called on the Auditing Committee to present its report on the financial statement of the treasurer. Gabe Ishley read the report and asked for its approval. A motion was made, seconded and carried. The Resolutions Committee was called upon to make its report. William A. Bear submitted the following: (1) WHEREAS, the 72nd Regular Meeting of the Rocky Mountain Coal Mining Institute celebrates sixty-four years of most successful service to the coal industry, and WHEREAS, this success is largely due to the faithful and devoted service of our Secretary-Treasurer, Augusta Whiteside, during the last fifty years of its existence, NOW THEREFORE BE IT RESOLVED, that we commend and express our sincere thanks to "Gussie" for her outstanding devotion in per- forming a job well done. (2) RESOLVED: WHEREAS, in the year since the last convention of the Rocky Mountain Coal Mining Institute, the Institute and the coal mining industry have suffered the loss through death of the services of:

Jan 1, 1976

of our good friends and fellow members: Patrick J. Quealy J. C. Roberts Gilbert Morton Sidney W. Farnham who left the world better for their having lived in it

Jan 1, 1930

A Joy Global Inc. Company [ ] ? Joy Global Inc. headquarters located in Milwaukee, Wisconsin ? P&H Mining Equipment surface mining equipment and support ? Joy Mining Machinery underground mining equipment and support

Jan 1, 2007

Jan 1, 1942

President-elect Bob Wilson opened the business meeting at 9:30 a.m. He called on Shirl C. McArthur to report on the financial statement of the treasurer. He read the data and asked for its approval. A motion was made, seconded and approved. The Resolutions Committee was called upon to make its report. The following resolutions were submitted: (1) RESOLVED: WHEREAS, in the year since the last convention of the Rocky Mountain Coal Mining Institute, the Institute and the coal mining industry have suffered the loss through death of the services of: J. S. Besser Harry Brophy Walter E. Burleson A. F. Geiger Wilbur J. Gunther Albert W'. Holmes Harold Levene Larry Littlejohn David H. Michael Carmal Patton Charles M. Schloss Ira R. SigMan

Jan 1, 1975

By E. H. McCleary

The Alamo Mine The Alamo mine is located about seventeen miles northwest of Walsenburg, Colorado, on the Loma Branch of the Denver and Rio Grande Western railroad, in the foothills of the Black Mountains of Huerfano County. Prospecting Mr. W. B. Lewis of New York City, president of the Oakdale Coal Company and also president of the Alamo Coal Company first became interested in this property in 1920. After all natural features of the surface had been carefully examined by Mr. Lewis, he was convinced that the property was underlaid with coal seams. Plans for prospect drilling were made at once and this drilling was started late in 1921. In all, eight drill holes were put down to the Trinidad sandstone which underlies the coal measures in this field. These drill holes in general, showed very satisfactory results. Two workable coal seams were penetrated by most of these drill holes, the upper seam being six and one half feet thick and the lower seam having a thickness of ten and one-half feet. The two seams are separated by forty feet of sandstone and shale. Analyses of the seams proved each to be of a very high grade bituminous coal possessing hardness much above other bituminous coals, and having very bright lustrous appearance. Tests of more than a year's duration proved the coal to store excellently in closed bins and also in open bins where coal is exposed to elements. The drill hole data further showed the coal seams to pitch more than fifty per cent or about twenty-six and one-half degrees. The pitch direction being approximately South 65 degrees East. The drill holes further proved the coal seams did not outcrop at any point on the property, and no evidence of coal outcrop has been found in near vicinity. A splitting and pinching out of seams was found to occur some two hundred to three hundred feet of theoretical outcrop at very Western boundary of property. The most Easterly or No. 6 drill hole has a depth of eight hundred fifty feet to floor of lower coal seam. The Trinidad sandstone was found to be immediately under the lower coal seam, and the Pierre shales lying under this sandstone. Plans for Development and Sinking Having obtained sufficient data, plans for development of the property were carefully made sometime in advance of the actual opening of the mine. Every condition was carefully studied and the maximum production of clean and well prepared coal at as low a cost as possible during the entire life of mine was kept uppermost in the minds of all. The life of mine is estimated at approximately fifty years. It was decided to open up the lower and thicker seam first, and due to the pitch and other conditions a slope opening was decided upon for its extraction. The pitch of the coal having been found to be from fifty to sixty per cent or twenty-six to thirty degrees, the plan of driving the slope directly down the pitch of seam was eliminated and a plan that would give a more economical grade was decided upon. To obtain a lesser grade, a point several hundred feet west of-and at a less elevation than the theoretical outcrop of coal seam was selected for the slope opening. (Fig. 18.) To have driven directly down the pitch of coal seam would also have given the slope an uneven grade as the pitch of coal seam varied as it approached the crop. From this point of opening, the slope was to be driven on a thirty-one per cent, or' about seventeen degree pitch to intersect coal seam in No. 6 drill hole, a distance through the Pierre shales and Trinidad sandstone of two thousand five hundred fifty feet, the slope to be driven practically due East

Jan 1, 1925

Jan 1, 1970