Search Documents

By D. H. Dueñas Tapia, Laura R. A. Huallpa, Laime L. Alarcón

Este trabajo se basará en datos obtenidos en el campo y también analizados en laboratorio, que serán interpretados y analizados para dar conclusiones y recomendaciones. Es necesario realizar un estudio Geológico, Geoquímico y Petromineragráfico del yacimiento de Oro orogénico (mesotermal) en la comunidad de Ccapana- Ccatca-Quispicanchi-Cusco.

May 1, 2008

By David Lewin

The journey toward cleaner coal-fired power generation is driven by technological improvements, more stringent regulations around greenhouse gas and other air emissions, and the potential of one of Canada?s most abundant resources. Within this context, EPCOR is leading efforts to commercialize gasification technology to produce electricity with near-zero emissions. By turning coal, oxygen, and water into synthesis gas through a gasification process ? and then capturing CO2 ? it is possible to dramatically reduce greenhouse gas and smog-related emissions. EPCOR is conducting front-end engineering and design work on an Integrated Gasification Combined Cycle technology (IGCC) utility-scale plant ? in conjunction with the Canadian Clean Power Coalition ? at its Genesee site, west of Edmonton. EPCOR, the Alberta Energy Research Institute, and Natural Resources Canada have each contributed $11 million to the $33 million project. A critical element of the project features the capture of CO2, which would be piped underground for long-term sequestration, or for use in enhanced oil recovery (EOR). The combination of IGCC and CO2 sequestration, at this scale, has not been used anywhere else in the world.

May 1, 2008

By B. Whistler

The Alpala porphyry copper-gold deposit is a recent discovery located in the Imbabura Province of northwestern Ecuador. The drilling of seventeen diamond core holes over a 900 m by 400 m area has defined a northwesterly-trending, steeply northeast-dipping dike-stock complex of diorite to quartz diorite that exceeds 1300 m in height. This intrusive complex is hosted by a sequence of andesitic volcaniclastic rocks and lavas. The host-rocks are interpreted to be part of the Paleocene to Late Eocene Macuchi Formation (BGS-CODIGEM, 1997; Cruz, 2007). The best drill intercept to date is 1312 m at 0.67 % Cu and 0.63 g/t Au from 128 m depth in CSD-15-012, which includes 576 m at 1.03 % Cu and 1.19 g/t Au.

May 1, 2008

By Jean Legault

ZTEM is a natural field airborne EM technology that is in its 10TH year of service and is widely used for porphyry copper exploration around the world, yet is still considered a new technology. ZTEM uses EM fields generated by worldwide thunderstorm activity as is primary source field. Its large depth of investigation (>1km), its sensitivity to weak lateral resistivity contrasts and the relative simplicity of its EM fields for computer modelling are among its greatest attributes. ZTEM has helped discover blind porphyry copper deposits and is also widely used in unconformity uranium, epithermal gold and geothermal exploration around the world.

May 1, 2008

By Theo Mayer

Presentation Outline Define data visualization in the context of workflow Present other industries? application and demonstrated benefits Provide conceptual tools to help you address a visualization strategy Hold 10,000 foot view ? to touch on many issues

May 1, 2008

By W. Zezenarro, J. Medina

El proyecto Kajol se encuentra a 154 Km al SW de Arequipa, en la Cordillera de la Costa (desierto de Clemesi) en la franja de pórfidos Tia María, La Tapada y Cruz de Mayo. El proyecto consta de rocas del Batolito de Ilo que intruyen la Formación Chocolate donde posteriormente han sido intruidos por un sistema de porfido, donde han sido albergados en el corredor Ilo-Islay (NEE-SWW) que correspondería a una zona de transtensión, las fallas del borde Este y Oeste del proyecto tienen sentido sinestral y al interior forman estructuras en pull apart con morfo-estructuras anastomasadas de tipo flor negativa demostrando la relación del corredor estructural con esfuerzos Riedel para el emplazamiento de magmas fértiles y lograr desarrollar sistemas pórfidos mineralizados.

May 1, 2008

By Cari Deyell, Brigette Martini

The AntaKori Cu-Au-Ag Project in the Hualgayoc mining district, northern Peru is a complex system dominated by calcic Cu-Au-Ag skarn hosted in Cretaceous sedimentary units. The skarn system is partially overprinted by two younger epithermal systems: high sulphidation (HS) epithermal gold-copper-silver mineralization related to the adjacent Tantahuatay system, and intermediate sulphidation carbonate-base metal Au-Ag-Pb-Zn-Cu mineralization related to late stage rhyolite stocks and flow domes (Wilson, 2012).

May 1, 2008

By J. Caliza, M. Ayamamani, E. Calizaya

"Los estudios se localizan en el extremo noreste sobre la margen derecha del rio Ocoña, próximo al poblado la Barrera, enmarcado por el batolito de la costa. El yacimiento PAITITI, emplazado por rocas Igneas plutónicas del Cretácico pertenecientes a la Súper Unidad Incahuasi, cortadas por estructuras filoneanas preferentemente de rumbos NE-SW con mineralización económica de Oro (Au). El objetivo principal es conocer las características geológicas, estructurales y los eventos de relleno en el yacimiento PAITITI, relacionada con la mineralización Aurífera depósito. "

May 1, 2008

By Lía Martínez, James J. LoCoco

Borehole geophysical logging has developed and improved many measurements for mining exploration in the past decade. Imaging tools such as the acoustic and optical televiewer are now being used to collect real time, high resolution, oriented fracture and bedding data. Drill holes 100’s of meters deep can be processed very quickly using automated structure picking software and borehole core samples can be digitally logged instead of using paper and pencil.

May 1, 2008

By J. Hantelmann

The Yanaquihua gold-bearing vein-fault deposit is associated with a sinistral strike-slip fault system, hosted within granite to granodiorite of the Tiabaya Super Unit of the Coastal batholith. The deposit is located near the northwest striking Cincha-Lluta-Incapuquio (System 11) regional fault system . Mineralization exhibits vertical trends and is primarily controlled by sub-vertical vein-fault structures. Mineralization includes variably abundant quartz, clay minerals, pyrite, calcite.

May 1, 2008

By C. Chávez, J. Portilla

El prospecto se ubica en el distrito de Chojata, provincia de General Sanchez Cerro, departamento de Moquegua y a altitudes desde 4,200 a 4,700 m.s.n.m. Las alteraciones más importantes en la brecha andesitica, son la silicificación (calcedonia, ópalo) y cloritizacion; también se observa un poco la presencia de sericita y algo de calcita.

May 1, 2008

By J. Peralta

El distrito Minero de Yanacocha está conformado por 10 depósitos epitermales de oro de alta sulfuración emplazados a lo largo del corredor estructural NE-SW. Quecher Main es uno de estos depósitos que fue descubierto y desarrollado en los últimos años como resultado de un nuevo enfoque en los trabajos de exploración. El descubrimiento y exploración del depósito se realizó entre 1998 - 2002, después de una evaluación económica cuyo resultado fue negativo el depósito fue descartado. En el 2013 el proyecto fue re-evaluado con el objetivo de encontrar zonas mineralizadas de oro en óxidos cerca de superficie; posteriores trabajos de mapeo, geoquímica superficial, y perforación de taladros diamantinos perpendiculares al corredor estructural NE-SW encontraron zonas con alta ley de oro (Au > 1g/t) en profundidad en óxidos.

May 1, 2008

By I. Sangay, J. Vivas

La investigación se desarrolla en el yacimiento La Arena, pertenece al distrito de Huamachuco, provincia de Sánchez Carrión, región La Libertad. Geográficamente se emplaza en la vertiente oriental de la cordillera Occidental de los Andes Centrales, en la margen izquierda del río Yamobamba y a 18 km al suroeste de la ciudad de Huamachuco, en la parte sur de la hoja de Cajabamba (16g) de la Carta Nacional.

May 1, 2008

By J. J. Morales

El deposito aurífero La Libertad es la mayor operación minera en toda Nicaragua. Adquirida por la compañía B2Gold Corp., en marzo del año 2009, ha producido para la misma un total de 811,000 onzas de Au a una ley promedio de 1,86 g/t Au y cuenta actualmente con un total de 213,000 onzas de Au en reservas probadas y probables, 415,000 onzas de Au en recursos medidos e indicados, y 436,000 onzas de Au en recursos inferidos.

May 1, 2008

By Mario Bendezú

Este trabajo tiene como objetivo mostrar la importancia de la minería junior en la creación de nuevas minas, así como en el mercado de valores. Este documento tocará los retos por los que está atravesando el sector junior, y analizará las acciones, factores, estrategias y documentos públicos provistos por ciertas mineras junior que lograron llegar a su objetivo.

May 1, 2008

By Kristie D. Tarr

Ideally, in situ monitoring would supply the input data for numerical modeling of backfill material property requirements. However, clue to production requirements and costs of conducting field tests, input data are often based on small-scale laboratory tests. The size of test samples is known to play an important role in the laboratory assessment of the behaviour of geotechnical materials, including backfill. There are observed differences between the mechanical properties of laboratory-scale samples and those of in situ materials, and these are generally attributed to the differences in scale. Various scaling factors have been proposed for converting laboratory observations to anticipated in situ conditions for soil and rock materials. With regard to mine backfill, very limited studies exist which have involved the effects of sample size on material properties. The literature indicates that reported backfill strength data are based on a variety of test sample sizes and in some cases, specimen geometries. Carefully determined laboratory scale effects could play an important role in estimating the potential backfill behaviour in the field, especially when developing new backfill systems. Laboratory studies were conducted with sample diameters ranging from 50 to 300 mm. Scale factors relating specimen size to strength were developed wherever possible, and are presented in this paper

May 1, 2008

Background: Frictional ignitions continue to be a problem facing the U.S. underground coal mining industry. Many methane igni-tions are associated with the impact of mining machine cutter bits on quartzitic material (e.g., sandstone) during the coal-cutting process. Most ignitions result in small methane-air fireballs often only a few feet in size and limited to the cutter head location. However, under certain conditions, frictional ignitions can lead to larger methane explosions and/or fires with the potential for causing serious injury or death to the mining machine operator and other nearby miners. The requirements for a frictional ignition are a flammable volume of methane-air and an ignition source. This source is usually the hot streak caused by the frictional impact of the mining bit on hard rock, and the frequency of occurrence increases with increased bit wear. Another possible ignition source is the fric-tional impact of rock on rock during a roof fall.

Mar 1, 2008

By Charles Graham

For hundreds of years the standard vertical mine shaft was rectangular shaped and timber lined. There are many advantages to rectangular shafts but as mines became deeper the circular shaft became more popular. The chief advantages of circular, concrete lined shafts are their ability to resist lateral pressure and they offer less resistance to ventilation air. A number of elliptical shafts have been sunk in an attempt to realize the advantages of both the rectangular and the circular shaft. A concrete lined elliptical shaft provides better space utilization than a circular shaft, would allow for shaft sinking with two double drum hoists, as well as concurrent level development. The design also makes one sided stations possible and provides for a simple headframe design.

Feb 1, 2008

By Jacek Paraszczak

As the deposits located closer to the surface are getting depleted, more and more Canadian mines produce ore from considerable depths. Deep mining represents a number of serious challenges including high rock temperature. Conventional diesel powered loadhaul- dump machines and trucks so widely used in metal mines constitute an additional source of heat and noxious gases. Due to this, they have a substantial adverse impact on a quantity of fresh air required and a cost of ventilation, particularly since the mines have to meet more and more stringent regulations in this respect. In this context, the paper examines possible alternatives for diesel powered equipment, both these commercially available as those at the stages of prototypes or under development. They are reviewed with regards to their principles, required infrastructure, stage of technology development and its progress. The questions of their flexibility, practicality and economic viability are also addressed. Following the above a potential for their implementation and possible benefits (if any) in the conditions of deep Canadian mines is discussed. The paper concludes with short to medium term predictions concerning the most promising drive alternatives for vehicles destined to operate in deep metal mines.

Feb 1, 2008

By Iann Bouchard

Introduction à l?abrasion et l?érosion Avec le temps, tout solide va éroder et user les métaux les plus durs; de plus, la Corrosion va aussi laisser une couche mince et faible d?oxydation qui sera rayée du substrat. Solutions et guide de sélection Les polymères de Henkel Loctite® peuvent: ? Réduire l?abrasion par glissement ? Protège contre les agents corrosifs ? Prévenir la cavitation ? Augmenter l?efficacité ? Réduire la turbulence ? Résister aux hautes températures?

Feb 1, 2008