Search Documents

By Marco Rojas

El yacimiento de Cerro Lindo es un depósito de sulfuros masivos de naturaleza volcánica, cuyo método de explotación Sub Level Stoping fue el más adecuado dado que utilizaba taladros largos en abanico que oscilaban entre los 8.0 y 21.0 metros; y posteriormente se convirtieron en taladros pasantes de hasta 38.0 metros. Sin embargo, existe un descontrol en la estabilidad de la roca remante, ubicado entre ambos lados de la galería central superior del tajo,y que tiene como consecuencia el colapso de la misma. En ese sentido, el presente texto plantea una alternativa de solución a través de la ejecución de taladros entre las mallas y paralelos a los últimos taladros de cada abanico, donde se calcula su espaciamiento y se les da la forma para generar voladura controlada. De forma que se determina los parámetros necesarios para ejecutar una voladura controlada exitosa que mantiene un mejor desarrollo de los tajos en Cerro Lindo.

Oct 21, 2015

By Raúl Gomero Cuadra

El presente texto revisa el Plan de acción sobre la Salud de los trabajadores realizado entre el período de 2015- 2025 de la Organización Mundial de la Salud. El plan elaborado contiene los ejes de acción estratégicos, objetivos específicos e indicadores dirigidos a la protección de los trabajadores, la promoción de la salud y el bienestar de los mismos, con énfasis en las poblaciones laborales en condiciones de empleo inequitativas y los que están expuestos a condiciones de trabajo peligrosas. Así también se difunde las acciones que buscan disminuir los riesgos del trabajo y las enfermedades no transmisibles en los sectores económicos críticos, el acceso a la salud y la cobertura universal de salud y los determinantes sociales de la salud de los trabajadores.

Apr 1, 2017

By Lawrence H. Van Vlack, Alfred S. Keh

The distribution of sulfur in iron was found to be dependent upon the time and temperature of the treatment as well as the chemical composition of the sulfide. With higher temperatures, the sulfide phase spreads more extensively between the iron grains. A complete network, however, does not form until approximately 1300°C (2372°F), ot which temperature the dihedral angle approaches zero. Silicon has little effect on this change. Aluminum, oxygen, and manganese all modify the temperature of sulfide network formation to a higher value. The microstructures which result and have significance in relation to hot-shortness are discussed. SULFIDE inclusions in steel were recognized by metallurgists before the turn of the century. Considerable attention has been paid to them, and numerous studies have been made on the working properties of steel as affected by them. It has been suggested that ho t-shortness of steel is due to the presence of an enveloping liquid sulfide film at the grain boundaries of the steel in the range of the hot-working temperatures. However, several facts have been observed in commercial steels which do not seem to be completely consistent with this explanation: 1) the frequent absence of continuous films of sulfide as observed under the microscope, 2) the absence of hot-shortness in some high sulfur and resulfurized steels, and 3) the limitation of hot-shortness to a definite temperature range. The role that manganese plays in steel to eliminate hot-shortness is well known, but the theory behind it is still under question. Moreover, the effect of de-oxidizers such as aluminum and silicon, and the effect of oxygen are still not clearly known. In this study, the effect of heat treatments and of additions of manganese, aluminum, silicon, and oxygen upon the distribution of sulfide inclusions in iron was investigated. Both the as-cast and the heat treated structures were studied, using microscopic and autoradiographic techniques. Part of the results were interpreted in terms of Smith's' concept of microstructure. Review of Literature Metallurgists used to consider sulfide inclusions as suspended particles. It was Wohrman' who first pointed out that sulfide inclusions are soluble in liquid iron. Many observed facts may be understood on the basis of this concept of solubility. Wohrman found that small castings contain small inclusions. and larger castings contain larger ones. Also, inclusion sizes are smaller near the chilled surface. For the same size ingot, the average inclusion size in a given heat of steel depends upon the rate of solidification. That is, with slow solidification, enough time for precipitation and agglomeration of these

Jan 1, 1957

By A. C. Fieldner

This is the tenth annual report of research and technologic work conducted by the Bureau of Mines on the occurrence, properties, mining, preparation, and uses of coal and coal products. These annual reviews are guide's to the current work-and publications of the Bureau but do not replace the more complete reports published under the authorship of the individual investigators on specific problems in Bureau of Mines bulletins, technical papers, reports of investigations, and information circulars and in the technical press. The Annual Report of the Director of the Bureau of Mines to the Secretary of the Interior for the Fiscal Year ended June 30, 1945, summarizes the year's work on coal as follows: Coal and Coal Products The United States maintained its No. 1 industrial position in supplying fuel for war and in preparing for peace through more complete mining, improved preparation and up-grading of coal for special uses, and better utilization of coal in industrial establishments and homes.

Jan 1, 1946

By Iván Monteagudo

El presente texto señala la mineralización y zoneamiento en el distrito minero de Colquijirca. En ese sentido, los zoneamientos, tanto de mineralización como alteración para los tres yacimientos (Gregorio, Colquijirca y Marcapunta) de dicha zona, apoyan la hipótesis de que estos se han formado a partir de un mismo sistema hidrotermal y que las mineralizaciones de Colquijirca y San Gregorio, se originaron por procesos de reemplazamiento polimetálico. De forma, que el Complejo de Volcánico de Marcapunta, centro de la actividad hidrotermal, presenta dos tipos de mineralizaciones distinguibles en tiempo y espacio. La primera mineralización de plata y oro se encuentra en los cuerpos de vuggy silica desarrollados en rocas volcánicas y la segunda, está relacionada a cuerpos de enargita-pirita (Cu±Au, Ag) que alcanzan su máximo desarrollo en sedimentos de la Formación Calera. Asimismo otros trabajos, señalan que la plata se encuentra asociada al cobre, así como también al zinc-plomo y los valores más altos de plata se encuentran en la zona de transición.

Jul 31, 2003

By Marino Gaspar

El presente texto tiene como objetivo la mejora de gestión de mantenimiento de la flota, el aumento de la productividad y eficiencia de los scoop en el proceso de monitoreo de la mina Los Quenuales de la unidad minera Yauliyacu. Para ello, se desarrolla SIMORES, un sistema que recolecta toda la información accesible de los scoop, para que se tenga una perfecta gestión de la flota de scoop con la máxima productividad y eficiencia. Dicha información genera datos como: tiempo de uso del motor, consumo del combustible, uso de los cambios de la transmisión, información de servicio, etc que permite monitorear y administrar mejor el equipo, haciéndolo más productivo.

Sep 24, 2008

THE furnace described in this paper was installed and has been used by the writer for the melting of rich gold-bearing material, and has given complete satisfaction. It may, therefore, prove of interest to other metallurgists who are faced with a similarproblem. A furnace of this type should be most suitable for the reduction of "cyanide preeipitate," "charcoal ash," "anode sludge," &c. formerly the melting was done in fire-clay crucibles, using coke or crude oil as fuel, but this method is costly, slow, and unsatisfactory. A small water-jacketed blastfurnace was also tried on this material after briquetting it, but was discarded in favour of the electric furnace. The furnace may be described as a simple form of the Heroult resistance furnace, with an adjustable upper electrode and a fixed bottom electrode. This is in accordanee with Stansfield's classification of electric furnaces. The heating is mostly due to the resistance offered the current by the molten slag. The melting chamber consists of a steel drum 14 in. in diameter and 21 in. high, and is lined with silica bricks specially made to fit the shell. The internal diameter is G in. The bricks contain 92 % silica, are made from calcined quartzite bonded with fireclay, and are similar in composition to those used for lining steel converters. They are set in a mixture of finely-ground quartzite and clay, and well dried out. The shell is bolted to a steel plate, which forms the decking of a truck running on rails, so that the furnace can be moved under ahood for carrying off the fumes. A cast-iron slag spout is bolted to the shell below the tapping hole, which is 4 in. from the bottom of the shell. Opposite this another hole 1 in. in diameter is drilled through the shell and lining for the passage of the lower...

Jan 1, 1918

By Flavio B. Begazo M

Dentro del proceso de refinería, el lodo generado en las celdas es menor de 2,3 kg de lodo/t de cátodos, debido a que la cantidad de plomo es menor a 100 ppm en los ánodos. De acuerdo a los yacimientos mineros y al proceso de modernización de fundición, se prevee que el contenido de plomo se incrementará 2.000 ppm y el peso del lodo en más del 200%. En ese sentido, las nuevas celdas han sido diseñadas para soportar un incremento en peso de lodo de hasta 200% sin que el lodo alcance el borde inferior de los cátodos. Sin embargo, se desconoce el modelo de volumen que alcance el lodo para un incremento de peso mayor al 200%. Por ello, el presente texto busca formular un modelo del proceso que permita predecir el comportamiento del lodo durante el proceso electrolítico y su efecto sobre la calidad del cobre refinado a través de la modelación el peso en lodo formado (m) Vs. en el plomo en ánodos y así determinar el efecto de este en los ánodos sobre la calidad de los cátodos.

Jul 31, 2003

By Silvio Hernández Aquije

El presente texto señala el descubrimiento del vanadio en el Perú, así como las cualidades de resistencia que imprime este elemento en los aceros. De otro lado, se menciona la clasificación que hizo L.Lunay de los depósitos vanadíferos que tienen un interés económico en la minería.

May 1, 1955

By Cleiton Rodrigues de Vasconcelos, Elizeth Oliveira Alves, Kleber Gonçalves Bezerra Alves

Em virtude da periculosidade do Pó de aciaria (PAE), práticas alternativas, como a reinserção do resíduo no processo produtivo, ou sua incorporação em outros materiais fizeram com que a reciclagem tenha se tornado uma via para este subproduto. O presente trabalho tem como objetivo identificar as áreas de desenvolvimento tecnológico de utilização do PAE, avaliar a potencialidade de reaproveitamento e reciclagem do resíduo oriundo do processo de produção do aço carbono, comparando as características obtidas do PAE analisado com os requisitos indicados através da análise de patentes. O PAE produzido no estado de Pernambuco foi caracterizado pelas técnicas de Fluorescência de raios X (FRX), separação granulométrica via peneiramento, distribuição do tamanho de partículas, Difração de raios X (DRX), Microscopia eletrônica de varredura (MEV) e Espectroscopia por energia dispersiva (EDS). A prospecção tecnológica foi realizada nas bases de patentes europeia EPO e na base nacional de patentes nacional do INPI. As análises realizadas mostraram que o material apresentou aproximadamente 28,5% de suas partículas com granulometria inferior a 53μm, composto em sua maioria por ferro e zinco presentes na forma de óxidos, organizados nas fases franklinita, zincita e magnetita. A baixa granulometria e composição química possibilitam a sua aplicação no campo dos materiais cerâmicos, bem como sua reinserção no processo de fabricação. O resíduo estudado apresentou características similares com os demais resíduos observados nas patentes.

Mar 1, 2019

By Sergio Sarmiento

La utilización de los espacios cedidos por las Comunidades Campesinas del entorno de la compañía minera Catalina Huanca y la complicada geografía desarrolllada en estas zonas andinas, generó la búsqueda de métodos de disposición de relaves alternativos y seguros en el desarrollo de sus operaciones mineras. En ese sentido, el presente texto señala la búsqueda de optimización de los relaves y su disposición en proporciones adecuadas para que cumpla con una granulometría adecuada de finos y áridos, de forma que se obtenga una mezcla homogénea que logre una masa de alto grado de cohesión al ser compactados y así minimizar los impactos de los relaves en el medio ambiente.

Oct 21, 2015

By O. P. Hood, R. H. Kudlich

When a gasoline locomotive is used in a mine there is danger of the noxious gases of the exhaust vitiating the air, but if enough air is circulating in those parts of the mine in which the locomotive is used, these gases are so diluted that they are rendered harmless, and the health of the workmen is not affected. In some mines the use of gasoline locomotives is impracticable, though in the majority of mines where they have been tried they have proved to be safe and economical. To determine the limitations that should surround the use of these machines in mines so that they shall not be detrimental to health and so that their economic advantage may be retained, it is necessary to ascertain the volume and the character of the exhaust gases and the amount of these gases that may be safely allowed in the mine air, and also to determine safe conditions of operation. The problem is primarily one of ventilation and like all ventilation problems must be intelligently computed to meet the conditions of each mine. The investigation described in this bulletin was undertaken 'by the Bureau of Mines in an endeavor to obtain exact information on some of the basal questions involved in the use of gasoline locomotives in mines, this investigation being one of many that the bureau has been conducting in its efforts to increase safety and efficiency in mining.

Jan 1, 1915

By Lucien Eaton

THE use of filling in mines is less common in the United States than it is in Europe, where in some places it is required by law. In most cases the filling is placed by hand, and the material used for this purpose is the waste from development and that sorted from the ore in the stopes. When these sources provide an insufficient supply, additional rock must be quarried on surface or mined underground, or some other material :st be used. In different parts of the world sand, clay, gravel, culm, nulated slag, mill tailings, and even ashes, have been used as filling material in place of or in conjunction with rock. Of all the materials used for filling the best is probably clean sand. Gravel, finely crushed rock, granulated slag and coarse mill tailings are almost as good, and the methods used for placing and confining sand will apply equally well to any of these. The advantages of sand are its comparatively slight compressibility and the ease, economy and convenience with which it may be placed. On account of the voids, which necessarily occur in fills made of coarse waste, such fills will compress 10 to 25 per cent before they develop their full strength, whereas clean sand seldom compresses more than 5 per cent. Sand is especially desirable when practically complete filling is required, and sand derived from mill tailings, especially when not thoroughly cleaned, has been remarkably effective in sealing off and extinguishing mine fires. When natural sand is available on surface, or when it can be obtained from the mill tailings or tailings dump, the cost of using this material for fill will probably be considerably less than that of rock. In this paper it is not proposed to discuss all methods of filling, butt to describe some of the methods used for placing sand fill and to make a brief comparison of their merits.

Jan 1, 1932

By William Sergio Flores Roman

Los aceros para armaduras de hormigón tienen que exhibir una buena relación entre resistencia y tenacidad que se ve reflejado en la performance del producto en servicio al ser aplicado a esfuerzos exigidos. Acerbrag es una empresa que produce aceros para la industria de la construcción teniendo en su gama los aceros de medio carbono para la fabricación de barras conformadas de dureza natural para armaduras en estructuras de hormigón. El objetivo de este trabajo es encontrar criterios de ventanas de trabajos operacionales y de control para la manufactura de aceros con buenas propiedades mecánicas en términos de resistencia y tenacidad. Este paper muestra los resultados de los trabajos realizados en las diferentes áreas productivas para conseguir un producto final con mayor resistencia a altas exigencias en servicio, además, reporta diferentes aspectos del proceso de manufactura del producto que van desde el ajuste de la composición química del acero, incluyendo criterios de propiedades mecánicas objetivos, criterios de calidad interna mostrando la microestructura de la barra antes y después de los cambios y finalmente la calidad dimensional y superficial de la barra nervurada, este último potenciando la falla prematura del material. Todos estos cambios, se ven reflejados finalmente en la performance de la barra, sometida a los nuevos criterios de exigencia en los ensayos mecánicos.

Oct 30, 2017

By Jorge F. Ponciano

El presente texto plantea una forma de tratamiento de lodos anódicos en la fundición de La Oroya a través de una individualización de los residuos de cobre y plomo, con la finalidad de recuperar los elementos valiosos. También, se analizan los resultados experimentales del esquema propuesto (tratamiento térmico-fusión-reducción) para los lodos anódicos de plomo, así como las ventajas que el nuevo diagrama de flujo aporta. Finalmente se plantean alternativas que procesen los residuos anódicos de cobre, complementando el esquema de los lodos nódicos de plomo, y se dan conclusiones técnico-económico del método innovador en relación al sistema actual.

Apr 1, 1991

By B. Boberg

Annual requirements of uranium to fuel the 441 currently operating nuclear reactors in the world is 170 million pounds U3O8 (65,385 tonnes U). 2005 global production was 108 million pounds (41,595 t U), of which only 2.7 million pounds U3O8 (1,039 t U), was produced from US uranium deposits. US nuclear utilities represent 26% of the global nuclear capacity but only obtain 2.5% of their supply from US uranium mines. Since 2002 annual global production increased from 93 million pounds U3O8, a 15% increase and the US production increased from 2.3 million pounds to 2.7 million pounds, a 17% increase. Reasonably Assured Resources (RAR) of 12,332 million pounds U3O8 (4.7 million t U) are reported from a wide variety of countries and types of uranium deposits. This RAR suggests that there are significant global uranium resources potentially producible at a price of $50 per pound U3O8 ($130 per kg U). Table 1 shows the distribution of global uranium resources. This table, prepared from historic data maintained by the World Nuclear Association, does not include some areas of the world that are currently considered to contain significant resources of uranium such as Mongolia. Table 1 suggests that the United States contains the fourth largest uranium resource in the world with 890 million pounds U3O8, behind Australia, Kazakhstan and Canada in resources that are producible at a price of $50 per pound U3O8 ($130 per kg U). Within the US, the states that demonstrate the greatest amount of uranium resource are Wyoming, New Mexico, Texas and the Four Corners Area of Arizona, Colorado and Utah.

Jan 1, 2007

The objectives of this paper are to introduce the International Code of Practice for Risk Management of Tunnel Works and to illustrate to the participants of the 13th Australian Tunnelling Conference 2008 how the insurance industry would like to see the future of tunnelling insurance. Tunnel construction projects have suffered large losses over the years as can be shown from various loss examples and a list of major losses over the last ten to 15 years. Since the consequences of insufficient risk control had to be borne by insurers, these losses have heightened the need for improved and adequate risk management measures so that insurance cover can also in future be provided for this hazardous industry sector. Observations are made as regards to the prevailing trends in the tunnelling industry, which contribute to the increase in risk and have adverse consequences for the insurance industry. To find a solution to this dilemma various options are examined with the suggestion of a Joint Code of Practice for Tunnel Works being agreed by all stakeholders, which would become essential to secure future insurance protection for such project work. The British Tunnelling Society has, in cooperation with the Association of British Insurers, developed such a code, which the International Tunnelling Insurance Group has now adopted for global application in international markets. The content and concept of this code is explained to establish a framework of understanding and applied risk management principles for tunnel works. This initiative also has the support of the International Tunnelling Association and the International Association of Engineering Insurers. The international application of this new code is demonstrated with a few examples, which also includes Australian projects. It is the aim that this code forms in future part of the insurance coverage for tunnelling works in order to put this risk segment on a more sustainable basis. For that reason the insurance industry is seeking the support of all stakeholders of tunnelling construction projects.

Jan 1, 2008

By A. Ordoñez

El presente estudio refiere la metodología y los cálculos para resolver el problema del transporte del fluído en el sistema de bombeo, de forma que ayude al diseñador en la selección de números de plantas de bombeo, sistema de la tubería y los diámetros adecuados, así también se describe las características idóneas para las posibilidades de su operación. Las características técnicas y económicas son programadas en FORTRAN IV y se obtienen para cada alternativa los costos de inversión anual dol proyecto con los que se determina la solución óptima. Una vez obtenida la solución óptima para el sistema de bombeo, el diseñador evaluará un programa donde se determine los anclajes y la ubicación de válvulas de aire, considerando ciertas simplificaciones en la estructura que mejoren el análisis del sistema.

Nov 20, 1972

By Paul Swatkowski

A Note About Copyrighted Material ??Permission to Use? has been granted ?Teachthe7habits ?Think win/win (4thHabit) ?Don?t stop here ?i.e., buy the book

Jan 1, 2009

By Laís Couto dos Santos

A corrosão é definida como sendo um conjunto de fenômenos de deterioração dos materiais em consequência de reações entre o material e o meio. Em instalações metálicas, tais processos são monitorados através de cupons de perda de massa. Quando o ataque se evidencia pela formação de cavidades com pouca perda uniforme, ele é denominado corrosão por pites. As empresas de monitoramento de corrosão adquirem cupons de diferentes fornecedores, e pouco se observa quanto ao tipo de processamento durante a fabricação, a composição química, a microestrutura, entre outros parâmetros e o quanto, podem alterar a confiabilidade dos resultados. O presente trabalho tem como objetivo avaliar o desempenho de cupons aço carbono, relacionando a composição química, densidade de inclusões e pites de corrosão presente em cupons. Na caracterização foram envolvidas as análises química e microscópica. Os cupons foram ensaiados em loop de corrosão tendo como fluido a água potável. Para determinar a densidade, área e profundidade dos pites de corrosão foram adotados as normas NACERP0775 e ASTM G46-94. Foi observada uma relação direta entre o teor de enxofre e a densidade de inclusões e, consequentemente, entre a densidade de pites presente nos cupons, após ensaio em loop de corrosão.

Aug 17, 2017