Search Documents

CONCLUSIONS: Our experience, where we attempt to remove a continuous face with a seam more than six and one-half feet in thickness, has been rather disastrous. We have been able to open up faces and retreat for a distance of 75 to 100 feet in this particular character of coal, but after the supporting timbers have been removed for the second or third time we have found that the roof has a tendency to ride over the props and break off at the face of the coal support. However, where our coal is below six and one-half feet in thickness we have had very good success in handling the roof and breaking it off systematically with our break line of props, which are usually from 12 to 15 feet from the face of the coal. Our practice in to set props at about two-foot intervals in each direction and remove two sets of props, at the same time two additional sets are placed along the coal face. At all times we are very insistent that all props be removed from the gob and that entire coal be taken out so that it is possible for the roof to break freely and all come down, not having any supporting pillars in the gob. The conclusion of our experiments to date is that if all the supports beyond the breaking line of props are taken out as the long face retreats and the closer the breaking line of props is kept to the face the better the results will be. We have never felt it safe to have less than four rows of props to protect the machinery and men working along the coal face. We feel that the time element as to the rapidity with which these faces are advanced or retreated, is of vast importance, but to date have not had an opportunity or experience enough to reach any conclusion as to what time element is proper here with us. We feel that the crushing strength of the overlying strata will govern this to a large extent, and as ours varies considerably, it is going to he very difficult for us to reach a definite conclusion. My opinion is, that conditions may be such that rather than have a short face and retreat rapidly, it will be found that a longer facewith a slower retreat will work out better. Such a condition might give the overlying strata time to settle. The caving of roof or of control of this caving, with us, is quite closely associated with the ventilation. We find that the places where the strata overlying the coal are composed of shale, that the effect of the air on this is of very great importance. It is our endeavor, at all times, not only to remove obnoxious gases, but to keep a current of fresh air moving along the face and, of course, a portion of this travels over the gob and comes in contact with the roof and overlying strata. This, we find, helps materially in keeping the roof on the move. As it is our practice to keep water for sprinkling purposes at all places, we also use this water to keep the roof wet back in the gob. The effect of water on the shale is to cause it to disintegrate quite rapidly. MR. HOLMAN (Concluding): If there are any questions about this, I will be glad to answer them. I have some prints and also some pictures of the scraper loader and the shaking conveyors (distributes.) PRESIDENT MOSES: We wish to thank you, Mr. Holman, and also wish that you would thank Mr. Dupont for his paper. Are there any discussions? Do you wish to ask Mr. Holman any questions? (No response.) PRESIDENT MOSES: Mr. Holman, I would like to ask you how you take the photographs; were they taken by flashlight, or were globes used, or how were they taken, in a gaseous mine? MR. HOLMAN: Our mines being gaseous, we do not use the ordinary flashlight for taking underground photographs, but we have had considerable success, I think, with underground pictures by means of electric lights. We use 250 watt globes. We have six of these rigged up with tin reflectors, 18 inches in diameter, on standards, and we carry two or three hundred feet of wire connected with these six lights, and they can be turned on in the room where we take the photograph, by means of this extra wire. We set the kodak up and arrange the picture and take a long time-exposure. We usually take an

Jan 1, 1926

Jan 1, 1974

[Page Officers of the Institute 5 Minutes of the Twenty-second Meeting 9 Spiralizing Plant Spring Canyon Coal Company-George A. Murphy 12 Discussion of Spiralizing Small Coal 16 Ventilation of Working Faces Under the Various Systems of Concentrated Mining-C. H. Trik 19 Discussion of Ventilation of Working Faces 23 Dangers from Electricity in Coal Mines-D. Harrington 35 Mechanical Loading-Edward Bottomley 56 Discussion of Mechanical Loading 63 Shot. Firing at Utah Fuel Company Mines-Frank N. Cameron 69 Supplementary Report of the Safety Committee-T. H. Butler 75 Membership List]

Jan 1, 1926

Jan 1, 1960

The following pages contain valuable information about the products and services offered by our advertisers

Jan 1, 1984

By Bill Reid

Jan 1, 2007

By David R. Hammond

How Could Natural Gas be Coal?s Best Friend ? - Natural gas is the environment friendly ?fuel of choice?; coal is the opposite - 90 % of new / replacement generating capacity in U.S. projected to be gas-fired - Natural gas-fired generation market share predicted to increase to 25-30% at expense of coal - Natural gas consumption forecast to growth from 22 TCF to 35 TCF per year by 2025 - Gas has good friends in the Environmental Industries and the current Administration

Jan 1, 2003

By Richard M. Whiting

Thank you very much for that introduction. I spent part of my early career in the coal industry here in Colorado, and I am always happy to return. In such a beautiful setting, it seems out of place to talk about "Improving the Climate". But in our work-a-day worlds, we know the climate for the coal industry is something less than picture perfect. But unlike Mother Nature's climate, there are some things we can do about the climate for coal. Today, I want to talk to you about sonic of the activities that we are engaged in... and that you can support... to improve that climate. A number of challenges and opportunities face our industry. I will try to set the stage for this conference by briefly describing the current climate for coal - which is indeed very challenging. I will then outline some of the steps we are taking to broaden our base to include our allies in the rail and electricity industries and the public at large.

Jan 1, 2000

The first session of the Rocky Mountain Coal Mining Institute was called to order by John T. Maulsby, Superintendent of Maintenance and Planning, Columbia-Geneva Steel Division, U. S. Steel Corporation, Dragerton, Utah, representing the past-president. W. K. Dennison, Jr., Superintendent. Koehler line. Kaiser Steel Corporation. Raton, New Mexico, who was unable to attend. Mr. Maulsby welcomed the members and guests, and introduced the President, A. Z. Dimitroff, Mining Electrical Engineer, Health and Safety, District 1-L, U. S. Bureau of Mines. Denver. Colorado. The text of President Dimitroff's address of welcome is as follows: The President's Remarks Guests and Members of the Rocky Mountain Coal Mining Institute: The distinct honor and privilege of officially welcoming you to this, the fifty-seventh regular meeting of the Institute, is indeed a pleasure. Your officers and committees have tried to provide a varied program which I am sure should have something of interest to all of us. The theme of this meeting, "Where Do We Go From here'?", appeared rather fitting for the In¬stitute this year because, as most of you know, until only two weeks ago we thought that this is the last time we will be able to meet at the Colorado Hotel, which has been the favorite spot of most members. Your officers and many of you were literally asking just that question.

Jan 1, 1961

PRESIDENT LITTLEJOHN: The paper of Mr. Emrick will now be open for discussion for about twenty minutes. The meeting is now open for discussion. MR. EMRICK: There is some question that may have occurred to you at different times, that is how are you going to tell when the bits are properly made? A fairly good rule to go by is when the used bits come out of the mine, if half of them are bent and half of them are broken, the average is pretty good MR. GEO. B. PRYDE (Union Pacific Coal Company): I would like to ask Mr. Emrick if he has any figures as to the saving of Dower with the different styles of its. MR. EMRICK: I suppose you mean chisel point bits and pick point bits? MR. PRYDE: Yes. MR. EMRICK: So far as I have been able to learn, the only reason why chisel point bits are used is to prevent coring that might be done by the cutter chain. The pick point bit, of course, is the proper thing to use. It can be used when the position of the cutter links in the cutter chain is right. I do not know of any figures which give power consumption ratings on the use of pick point and chisel point bits, but there are tests and ratings, etc., which have been taken- which have been tested as against different bits, which have been given proper clearances against bits not having been given proper clearances, and they will run,-in their saving in power, they will run 20 to 25 per cent. MR. A. C. WATTS (Chief Engineer, Utah Fuel Company) : I would like to ask Mr. Emrick if he has any record showing the saving in power on using the alloy steel chisel bits. I know that several experiments have been made; I do not recall the figures now, but we had a very decided saving in power. MR. EMRICK: I haven't any of the records. Do you think that is because of the steel that has been used? MR. WATTS: Well, they were all sharpened by the same man and used in the same machine, and at the same shop. I do not know the composition. It is "Red Star" Vanadium that I had in mind. MR. EMRICK: I have not seen any records. Some companies are using the tool steel bits because they stand up a little bit better. MR. BENEDICT SHUBART (Secretary) : I was going to ask Mr. Emrick about that question. There is one company that does not recommend tempering the bits. They recommend using not exactly self-hardening steel, but one that is bard enough without quenching-they use 80-90-point car- bon but about a 70-point manganese, not exactly self-hardening steel, but they do not temper this at all. Will Mr. Emrick state if a steel of that kind could be worked in the bit sharpening machine that his company makes, as it

Jan 1, 1925

[W. R. Abbott, 11o8 First National Bank Bldg., Denver, Colo. L. E. Adams, 817 Newhouse Bldg., Salt Lake City, Utah. Herbert Addison, Big Horn Colliers Co., Denver, Colo. Richard V. Ageton, Brighton Mich. John Alexander, Dacona, Colo. C. A. Allen, 448 Capitol Bldg., Salt Lake City, Utah. David Allen, Lafayette, Colo. John Allen, Ludlow, Colo. Thomas Allen, Mt. Harris, Colo. Gerald Alley, C. F. & I. Co., Pueblo, Colo. Archie Allison, Box 562, Walsenburg, Colo. D. S. Allison, 56 W. 6th South Street, Salt Lake City, Utah. Park Allison, Box 94.0, Rock Springs, Wyo. Howard R. Allonier, care Lunkenheimer Co., Cincinnatti, Ohio. J. B. Ambler, care Ambler & Riter, Engineers, Salt Lake City, Utah. A. F. Anderson, 403 Ideal Bldg., Denver, Colo. W. K. Anderson, 4.23 East Yampa Street, Colorado Springs, Colo. Sam Andrews, 503 Pike Avenue, Canon City, Colo. Jos. Angster, Farr, Colo. William Angus, Somerset, Colo. Joseph Appleton, Ironton Engine Co., Ironton, Ohio. Victor Arnoldi, Ideal, Colo. John Arnott, Crested Butte, Colo. R. M. Atmore, Swastika, N. M. W. H. Backman, 1601 Alcott Street, Denver, Colo. Edward E. Barrett, Roberts & Schaefer Co., Chicago, Ill. G. F. Bartlett, 311 Ernest & Cranmer Bldg., Denver,, Colo. C. S. Beach, Kemmerer, Wyo. Thos. Bertram, Box 134?, Oak Creek, Colo. Charles Beuchat, Pryor, Colo. John Bevan, 1625 North Corona Street, Colorado Springs, Colo. James L. Bisch, Van Houton, N. M. Jos. Bodner, Oak Creek, Colo. A. H. C. Boissier, 302 E. & C. Bldg., Denver, Colo. John M. Bopp, 1615 Walker Bank Bldg., Salt Lake City, Utah. Edward Bottomley, Carneyville, Wyo. James V. Bowen, Union Coal and Coke Co., Denver, Colo. Alex R. Bowie, Bowie, Colo. John S. Bowie, Bowie, Colo. Wallace D. Bowie, Bowie, Colo. W. J. Bowns, Castle Gate, Utah. L. Brandenburger, 59 West Broadway, Salt Lake City, Utah. James Brennan, Primero, Colo. W. D. Brennan, Dawson, N. M. Burt B. Brewster, 704 Kearns Bldg., Salt Lake City, Utah. A. L. Brockman, Sugarite, N. M. Alex. J. Brooks, Supt. Hastings No. 5 Mine, Hastings, Colo. Edward Brooks, Sweetwater, Wyo. E. S. Brooks, Rock Springs, Wyo. D. W. Brown, Rocky Mountain Fuel Co., Denver, Colo. L. E. Brown, 1212 Walker Bldg., Salt Lake City, Utah. Mark Y. Brown, 629 East Main Street, Trinidad, Colo. H. H. Bubb, Carbon Coal and Coke Co., Cokedale, Colo. W. H. Bullock, 1052 Gas and Electric Bldg., Denver, Colo. Thomas B. Burnite, 523 Boston bldg., Denver, Colo.]

Jan 1, 1921

Jan 1, 1995

PRESIDENT WETZEL: The meeting will come to order. We are pleased to see a few of the more hardy survived last night's-ordeal and are present this morning. The Secretary has some correspondence which he will read. SECRETARY WHITESIDE: Gentlemen, I have a couple of telegrams and a letter which I would like to read to you at this time. First, a telegram addressed to Mr. Wetzel: "Regret greatly necessity canceling my plans to be present at meeting. Appreciate your conveying my best wishes to members for successful and profitable session.

Jan 1, 1942

Meeting called to order by President Herres, eleven o'clock A. M., Monday, August 27, 1928. Address of Welcome by Mr. T. S. Taliaferro, Jr. Address by Mr. William Redshaw, Chairman of the Rock Springs Chapter of the Institute. Paper, "The Effect of Mechanical Coal Mining on Mine Safety," by Lyman Fearn, State Mine Inspector, Wyoming. Paper, "Safety," F. C. Miller, Chief Chemist, Colorado Fuel & Iron Com¬pany, Trinidad, Colorado. Afternoon session, meeting called to order two P. M. On suggestion of Mr. William Littlejohn, the President appointed a special resolutions committee, consisting of Messrs. P. J. Quealy, R. L. Hair and William Littlejohn, to draft resolutions protesting against the granting of a franchise for piping natural gas into Salt Lake City, to be sent to the City Commissioners of Salt Lake City, with carbon copy to the Utilities Commission of Utah. The Committee submitted resolutions which, upon motion of Mr. Littlejohn, and seconded by Mr. Butler, were adopted and sent by telegraph to the Utilities Commission and the City Commissioners.

Jan 1, 1928

The Wednesday morning session was opened by President Stanley Shuhart at 9-30 a.m. He called the Chairman of the Auditing Committee. Kenneth Eaton, to report on the financial statement. Mr. Eaton read the data and asked for its approval. It was made, seconded and approved. John Turner, Chairman of the Resolutions Committee, submitted the following: RESOLVED: Whereas, in the year since the last convention of the Rocky Mountain Coal mining Institute, the Institute and the cool mining industry generally have suffered the loss through death of the services of: Walter M. Bellairs F. V. Colombo, M.D. George R. Delamater J. H. East, Jr. E. W. Felegy Hugo H. Machin Archie M. Morrison George E. Mills Veloy K. Piccioni

Jan 1, 1969

[Adams, Dell H Consolidation Coal Co., 3300 One Oliver Plaza, Pittsburgh, Pa. Adams, Douglas K General Electric Co., P.O. Box 2331, Denver 1, Colo. Adams, Kenneth L Peabody Coal Co., 33 Carnation Dr., Belleville, Ill. Ahlborg, William Joy Mfg. Co., 580 Denver Club, Bldg., Denver, Colorado Albrechtsen, Ray H Mt. States Resources Corp., 2330 S. Main, Salt Lake City, Utah Allen, Dr. Harry C U. S. Bureau of Mines, Washington, D. C. 20242 Amerman, Richard W Utah Cons. & Mining Co., Box 155, Fruitland, New Mexico Anderson, G. A Walker Bank & Trust Co., 848 N 3rd E, Price, Utah Anderson, John S. Utah Cons. & Mining Co., 550 California St., San Francisco, Calif. Anderson, Robert Mine Safety Appliances Co., 1881 West N. Temple, Salt Lake City, Utah]

Jan 1, 1971

Jan 1, 1925

A Joy Global Inc. Company [ ] ? Joy Global Inc. headquarters located in Milwaukee, Wisconsin ? P&H Mining Equipment surface mining equipment and support ? Joy Mining Machinery underground mining equipment and support

Jan 1, 2007

Earl W. Baker W. P. Bigler Lyman Fearn Leslie H. Johnson V. O. Murray Max C. Scheble Fred L. Smith who left the world better for their having lived in it . . .

Jan 1, 1986

[Adams, Dell H Consolidation Coal Co., 43 Denver Tech Center, Englewood, Colo. Adams, Douglas K General Electric Co., Box 2331, Denver, Colo. Adams, Kenneth L Peabody Coal Co., 33 Carnation Dr., Belleville, Ill. Aggen, Marshall J Marathon LeTourneau Co., Rt. 4, Box 1188, Henderson, Texas Ahlborg, William Joy Mfg. Co., 580 Denver Club Bldg., Denver, Colo. Albrechtsen, Ray H Mt. States Resources Corp., 2330 So. Main, Salt Lake City, Utah Alford, Eugene C Pittsburg & Midway Coal Mining Co., 2025 TenMain Center, Kansas City, Missouri Allen, Earl W Mine Safety Appliance Co., 5708 East 7th St., Tucson, Arizona Alston, George Mine Safety Appliances Co., 400 Penn Center Blvd., Pittsburgh, Pa. Amerman, Richard W Utah International, Inc., Box 155, Fruitland, New Mex. Anderson, G. A Walker Bank & Trust Co., Drawer M, Price, Utah Anderson, John S Utah International, Inc., 550 California St., San Francisco, Calif. Anderson, Robert Mine Safety Appliances Co., 1881 West North Temple, Salt Lake City, Utah]

Jan 1, 1973