Search Documents

By Jan M. Peter

The Early Norian Windy Craggy massive sulfide deposit is within the allochthonous Alexander terrane of the Insular tectonic belt in extreme northwestern British Columbia (Figure 1). Host rocks are the Middle Tats Volcanics, part of an informally-named volcano-sedimentary succession of mixed graphitic argillites and mafic pillowed and massive volcanic flows and sills of Upper Triassic age (Figure 2) that have suffered only lower greeschist-facies metamorphism. The volcanic rocks are light rare earth element (LREE)-enriched and display a variably developed back-arc subduction signature. Major and trace element compositions of the host argillite show that it contains an appreciable hydrothermal component, as evidenced by low high Fe and Mn contents. These sediments therefore record steady, continuous hydrothermal activity punctuated by intermittent turbidity currents sweeping into the basin. The deposit consists of at least two discrete sulfide lenses (the North and South Sulfide Bodies), as shown in Figure 3, a level plan at the elevation of the exploration workings. Published reserves at 0.5% copper cut-off are 297.4 million tonnes grading 1.38% Cu, 0.08% Co, 0.21 g/t Au and 3.9 g/t Ag (as of December 1991). However, the deposit is larger than this and further drilling is required to delineate it completely. Mineralization comprises massive sulfide, stringer/stockwork, and finely bedded to laminated sulfides and exhalites. Stockwork mineralization consists of sulfide-quartz-chlorite veins with attendant chlorite and silica alteration. Mineralization consists predominantly of massive pyrrhotite andlor pyrite with lesser chalcopyrite and magnetite. Figure 4 is an oblique section through the North Sulfide Body, the most northerly sulfide mass shown in Figure 3, which shows the distribution of the pyrite and pynhotite-rich massive mineralization and the stringer zone. The North Sulfide Body contains appreciable sphalerite, whereas the South Sulfide Body contains only trace amounts. Gangue minerals include quartz, chlorite, calcite, siderite, ankerite, stilpnomelane and magnetite. The minor hydrothermal exhalite sediments are comprised of chert, carbonate, and minor

Jan 1, 1993

By Tetsuo Yamazaki

Deep-sea rare-earth element-rich mud (REE Mud) distributes in pelagic clayey sediment column on ocean seafloor at 4,000-6,000 m deep. The thickness ranges 5-80 m and the burial depth 0-100 m. The REE content ranges 600-2,250 ppm in Pacific and one of the richest, maximum 6,500ppm, has been found in Marcus Is. exclusive economic zone. By applying a conventional hydraulic excavation and lifting methods, the economy of REE Mud mining around Marcus Is. is preliminary examined. Because the waste content in REE Mud is high and the disposal cost in Japan is very expensive, the mining is recognized far away from economy.

Sep 14, 2011

By Robert M. Owen

Geochemical exploration for marine placers involves the acquisition, processing, and interpretation of geochemical data. Recent technological advances such as in-situ analysis systems and microcomputers have greatly improved our ability to acquire and process data, but their full benefits cannot be realized until we also develop improved methods for reducing and interpreting large amounts of raw geochemical data. Toward this end, our research has sought to identify existing and/or develop new geostatistical techniques for use in marine placer exploration. Each technique has been tested by evaluating its performance in the analysis of existing data sets. The data sets typically include the results of chemical analyses of suites of sediment samples collected from areas of known or suspected platinum and gold placers along the Bering Sea coast of Alaska. Results to date indicate that three geostatistical methods (subpopulation partitioning analysis, comparative factor analysis, and end-member compositional factor analysis) are useful in identifying elemental groups which can serve as "pathfinders" in the search for marine placers, and are also helpful in discerning the generic geochemical basis under lying observed statistical correlations between pathfinder elements and placer minerals. Existing methods of modelling sediment dispersal patterns have been examined with a view toward adapting them to the specific problem of understanding placer formation in

Jan 1, 1986

By Richard H. T. Garnett

Diamonds were discovered on the coast of Namibia in 1907 but it was not until 1962 that the first gems were produced from offshore by a barge employing an airlift. Geophysical surveys and a sampling program were initiated and an understanding of the diamond distribution was gained. Several vessels, some with multiple airlifts, were used until the early 1970's. Some spectacular production results were achieved, but generally the systems failed to retrieve the gravels efficiently from beneath the overburden and off the bedrock. Various companies continued working with mixed outcomes until the mid-1980's, when new regulations were enacted by the authorities. The local Southern sea conditions dictate the present mining methods which are now applied over several hundred kilometers of the west coast. In shallow waters divers operate from small vessels, suctioning the diamondiferous gravels to surface with gravel pumps. In water depths of up to 50 m airlifts of various designs continue to be utilized with recovery plants installed on the vessels. Beyond 100 m depths a remote controlled, tracked, vehicle is used, together with a large drill mounted on swell compensator. Each system is deployed from a separate ocean-going vessel. Production of diamonds from the offshore is rising rapidly, with expectations of further increases. The coastline is likely to be the scene of new developments in marine mining techniques.

Jan 1, 1992

By Virginie Tilot de Grissac

This project funded by Government of Flanders (Belgium) and coordinated by the Intergovernmental Oceanographic Commission proposes to draw recommendations for conservation of the biodiversity and for minimizing the impact of future nodule mining from the description of the referential state of suprabenthic megafaunal assemblages within a nodule ecosystem in the Clarion-Clipperton Fracture Zone (CCFZ). The description of this specific ecosystem is based on the analysis of about 200 000 photographs and some 55 hours of film collected by French and American exploratory cruises. The video and hotographic sampling has been achieved by means of different towed and remote control devices designed for Ifremer and NOAA including the manned submersible “the Nautile.”

Aug 24, 2006

By Henrik Schiellerup, Irene Zananiri, Johan Nyberg, Thomas Kuhn, Luis Somoza, Teresa Medialdea, Maria Judge, Pedro Ferreira, Gerry Stanley, Javier González

The GeoERA Co-Fund action is a joint contribution of 48 national and regional Geological Survey Organisations from 33 European countries “Establishing the European Geological Surveys Research Area to deliver a Geological Service for Europe (GeoERA)”. This is an ERA-NET action under Horizon 2020. The aim of GeoERA is to fund transnational projects contributing to the best use and management of the subsurface, addressing the following four themes: Geo Energy, Ground Water, Raw Materials and Information Platform. The European Commission recognises the significance of raw materials through its Raw Materials Initiative (RMI), the European Innovation Platform on Raw Materials (EIP-RM) and Horizon 2020 funding, specifically through Societal Challenge 5 – Climate Action, Environment, Resource Efficiency and Raw Materials. The GeoERA Raw Materials Theme will contribute to research and innovative developments for minerals inventory, minerals yearbook, exploration, mapping, modelling, metallogeny and critical raw materials in the pan-European framework including the sea. A major element in Europe’s long term economic strategy is to ensure security of supply for strategic and critical metals as part of the Blue Growth Strategy developing sectors that have a high potential for sustainable jobs and growth as seabed mining. The project MINDeSEA results of the collaboration between eight GeoERA Partners and four Non-funded Organizations at various points of common interest for exploration and investigation on seafloor mineral deposits. The Geological Surveys of Spain, Germany, Greece, Ireland, Norway, Portugal, Sweden and Ukraine are organisations with responsibility for coastal, marine geological investigation and mineral resources studies and mapping in their respective countries. The Non-funded participants: the Instituto Português do Mar e da Atmosfera; the United States Geological Survey; the All-Russia Scientific Research Institute for Geology and Mineral Resources of the Ocean; and the Geosciences Institute, host important databases, they have an international reputation for excellence in both science and technology, and are internationally-known experts on seafloor mineralisation and hydrothermal systems. This project addresses an integrative metallogenetic study of principal types of seabed mineral resources (hydrothermal sulfides, ferromanganese crusts, phosphorites, marine placers and polymetallic nodules) in the European Seas. The work program includes all the regional seas around Europe comprising the Atlantic Ocean, the Mediterranean Sea, the Baltic Sea and the Black Sea (Fig. 1). The MINDeSEA working group has both knowledge of and expertise in such types of mineralisation, providing exploration results, sample repositories and databases to produce innovative contributions. The importance of submarine mineralisation systems is related to the abundance and exploitation-potential of

Jan 1, 2018

By Naoki Hiroyoshi, Kunihiro Hori, Kengo Sekimura, Mayumi Ito, Kouki Kashiwaya, Eiji Yamaguchi, Masami Tsunekawa

Cobalt-rich ferromanganese crusts and nodules ores from seamount areas contain volcanic and sedimentary rocks as substrate or nuclei. During the mining operation, these rocks should be separated as unfavorable waste rocks with the manganese minerals. The ferromanganese crust and nodule ores require mineral processing to remove the substrate rock before the smelting. Deep-sea manganese nodule ores in contrast contain vanishingly small rocks, and can be directly treated with a smelting process without mineral processing treatment. This paper shows phisical and chemical description of the ores for the purpose of mineral processing, and reports liberation degree measurements of crushed ores and gravity separation tests. A mineral processing treatment flow is proposed from the obtained results. There is the first report of applying gravity separation in the treatment of coarse sized crushed products of cobalt-rich ferromanganese crust and nodules ore.

By Alexander Malahoff

A shipboard research system capable of operating in waters of up to 2,000 m has been designed and implemented by the Hawaii Undersea Research Laboratory (HURL), University of Hawaii. It uses a remotely-operated ocean bottom survey camera system, ROV, bottom TV grab, the PISCES V submersible, and a submersible emergency recovery system aboard the 225-foot RN KA'IMIKAI-O- KANALOA. All systems are operated from the stern of the KA'IMIKAI with a mounted Caley telearm and articulated A-frame system. The system was designed for multi-purpose use of the telearm for launch and recovery of the PISCES V submersible on a lift recovery line (with or without diver assistance), or night-time operations with an electro-optical cable using either the HURL ocean floor sidescan, or photo and video system operated at 10 m above the ocean floor. The 1.14-inch diameter cable is also used to operate the RCV-150 garage/ROV system. The garage/ROV system has also been designed to act as a submersible rescue system with a submersible lift capability.

Jan 1, 1992

By Charles L. Morgan

The Minerals Management Service of the U.S. Department of the Interior and the State of Hawaii Department of Planning and Economic Development are investigating the cobalt-rich ferromanganese oxide crust deposits found within the Exclusive Economic Zones (EEZ) of the Hawaiian Islands and Johnston Atoll. The objective of this investigation is to complete a preliminary resource assessment and an Environmental Impact Statement for potential leasing of mineral rights to these crusts. The results of this effort will be summarized and published in a Draft Environmental Impact Statement in March 1986. Three oceanographic cruises to deposit sites in the Hawaiian Islands EEZ were conducted by the University of Hawaii in 1984. As a result, data and sample analysis yielded the following resource estimates (in thousand tonnes): (1) total crusts - 378,500; (2) cobalt - 2,500; (3) manganese - 76,200; (4) iron - 59,700; and (5) nickel - 1,400. These estimates do not include key factors such as deposit continuity, recoverability, and environmental sensitivity. A preliminary attempt to quantify some of these factors for one particular deposit is in progress and will consist of detailed field studies followed by laboratory analysis. Similar evaluations of the Johnston Island EEZ have also begun and are based upon field work conducted by West German researchers and the U.S. Geological Survey. The Johnston Island EEZ appears to have crust resources about as large as those contained in the entire Hawaiian EEZ.

Jan 1, 1985

By T. Kuhn

The Logatchev hydrothermal field is situated on the east inner flank of the rift valley of the MAR at 14°45?N and is hosted by serpentinized peridotites and minor gabbronorites while basalts are subordinate. Hydrothermal precipitates recovered from the Logatchev field during a recent R/V Meteor cruise include massive chalcopyrite chimneys, massive pyrite crusts, silicified breccias, abundant secondary Cu-sulfides, red jaspers, abundant Fe-Mn-oxyhydroxides as well as atacamite and Mn-oxides (Kuhn et al., 2004). Previous results of hydrothermal fluid studies in the Logatchev field are somewhat at odds with theoretical models of ultramafic-seawater reaction. Butterfield et al. (2003) suggested that the Fe component of orthopyroxene plays the more important role compared to olivine in ultramafic-hosted hydrothermal systems. This consideration is supported by the recovery of large amounts of Opx-rich gabbronorites and orthopyroxenites in the Logatchev field (Kuhn et al., 2004). A possible tool to constrain the contribution of the different rock types (ultramafics, mafics, MORB) to a seafloor hydrothermal system is the systematic analysis of 187/188Os ratios of the host rocks as educts and the sulfides as products. For instance, abyssal peridotites mainly display low 187/188Os ratios (<0.127); in contrast MORB and gabbronorites have radiogenic ratios of >0.13 (Snow and Reisberg, 1995), orthopyroxenite has ratios of about 0.174 (Büchl et al., 2002) and seawater has an ever higher 187/188Os of about 1 (Sharma et al., 1997). Therefore, massive sulfides predominantly leached from ultramafic rocks should have Os isotopic ratios plotting on a mixing line between the ultramafic rocks and seawater (in a 187/188Os vs. 1/Os diagram), whereas those derived from MORB, gabbronorites and/or orthopyroxenites will be plotting on different mixing lines.

Jan 1, 2004

By T. Barryere, R. B. Pedersen, E. Reeves, A. Stensland, I. Thorseth, T. Baumberger

Venting on ultraslow spreading ridges is far more abundant then previously predicted, and the discrepancy between observed and predicted vent field density may imply that non-magmatic heat sources are common along these ridges (Baker and German, 2004; Escartin et al., 2008; Rona et al., 2010; German et al., 2016). In this study we have estimated the flux from two hydrothermal vent sites situated on the slow to ultraslow spreading Mohns Ridge at the Arctic Mid-Ocean Ridge system (AMOR). The flux estimates have been made using the primordial isotope 3He in the non-buoyant plume above the Loki’s Castle vent field at the northern termination of the Mohns Ridge, and from the Jan Mayen vent fields area situated close to the southern termination of the ridge. Primordial 3He enters the oceans through degassing and mixing with hydrothermal fluids eventually to be discharged at the ocean floor primarily at hydrothermal vent sites and submarine volcanic eruptions (e.g. Clarke et al., 1969; Lupton and Craig, 1981; Lupton, 1998). Once introduced into the water column the concentration will only decrease by dilution due to its conservative behavior in the water column. Water column samples were collected using a CTD (conductivity, temperature, depth) probe (911plus Seabird) with a Niskin water bottle rosette. The water column above the Jan Mayen vent fields (JMVF) was sampled in the years 2006, 2011, 2012 and 2013 (82 samples) and the water column above the Loki’s Castle vent field was sampled in the years 2007, 2008 and 2009 (116 samples).

Jan 1, 2018

By Randolph A. Koski

Recent investigations located at least six major massive sulfide deposits (dimensions measured in tens to hundreds of meters) within a 50-km-long segment of Escanaba Trough, the sediment-covered axial valley of southern Gorda Ridge. The sediment fill is intercalated silt and sand turbidites and hemipelagic mud with a maximum thickness of 500 m. Several volcanic edifices, spaced at approximately 15-km intervals along the ridge axis, penetrate and locally breach the sediment. The largest sulfide deposits form mounds and ridges on the steep flanks of structurally unstable sediment-capped blocks that have been uplifted above the volcanic edifices; both sediment and sulfide deposits are undergoing rapid erosion and redeposition. Although hydrothermal activity appears to be absent at most sulfide fields, 220°C fluids are discharging from the tops of sulfide mounds near 41°00&apos;N lat, 127°31&apos;W long. Recent pillow lavas and sheetflows erupted onto the sediment-covered sea floor less than 500 m away from the active vent field. The massive sulfide deposits have compositional characteristics that differ from deposits formed on sediment-free spreading axes. The Escanaba Trough deposits include Fe- and Cu-rich, Zn- and Pb-poor massive sulfide mounds, polymetal (Zn-Fe-Pb-Cu-As-Ag-Sb-Sn) sulfide vent structures, abundant barite-rich chimneys, crusts, and sinter cones, and thermogenic petroleum in the sulfide and sediment. Sulfate-rich crusts have high Au values ranging between 2 and 10 ppm. The unusual mineral assemblage at Escanaba Trough

Jan 1, 1989

By Lénaick Menot, Anne-Sophie Alix, Charline Guérin, Sébastien Ybert, Ewan Pelleter, Florian Besson

Ifremer, on behalf of the French government, holds an Exploration Contract with the ISA for polymetallic nodules in the CCFZ. As part of its exploration activities, the NODULE (2015) cruise was conducted to acquire a 50 m resolution bathymetric coverage of the eastern sectors of the Contract. In 2017, Ifremer initiated an update of the Contract’s mineral resource estimate. Metal grades and nodule abundance were modelled using ordinary kriging. The inferred mineral resource is 436 Mt (wet) of polymetallic nodules at an average abundance of 10.7 kg/m² with a cut-off grade of 7 kg/m². Based on the geological data, seamounts, sedimentary basins and steep slopes contain no nodules. Technical studies of most of the contractors have determined that nodule collectors could not maneuver on slopes above 5 to 10°. Thus, Ifremer has selected a quite conservative slope threshold of 7 % (about 4°) and a backscatter threshold of -29.5 dB to delineate nodule-free areas. This has a significant impact on the resource estimate, as about 54 % of the eastern Contract areas are excluded. Near-seafloor high-resolution mapping and photographic transects, associated with finer-spaced box-core sampling could constitute a next step to better constrain the mineable areas and to get a higher level of confidence in the resource estimation.

Jan 1, 2018

By Toru Yamasaki

A concept of plate-tectonic controls for the formation of seafloor massive sulfide (SMS) deposits in back-arc settings was established by Franklin et al. (2005). According to Franklin et al. (2005), a consequence of extension and rifting is subsidence, thinning of the crust, and the rise of hot, athenospheric mantle into the base of the crust. Underplating of the crust by mafic magmas results in low-pressure partial melting of the hydrated crust at a <15-km depth, and the generation of felsic anhydrous melts. The rapid ascent of hot felsic melts, along with mantle-derived mafic melts, results in bimodal volcanism that characterizes rift and volcanogenic massive sulfide deposits (VMS) environments. The rapid and focused advection of the magmatic heat within the rift to the near-surface environment which are required to sustain vigorous long-lived VMS hydrothermal systems. Faults within rift environments may also allow seawater to penetrate into subvolcanic intrusions and mix with magmatically generated metalliferous fluid or allow a direct magmatic contribution from shallow crustal level (3–12 km) magma chambers (Franklin et al., 2005, and references therein). In addition, the caldera-forming processes are favorable for the formation of VMS deposits and the focused high heat flow and cross- stratal structural permeability that is restricted in time and space to caldera development provides an explanation for the clustering of VMS deposits and their restriction to specific time-stratigraphic intervals and structures in the evolution of submarine central volcanic complexes (Franklin et al., 2005, and references therein). The concept is persuasive, although it is based on a series of logically constructed reviews mainly focused on ancient on-land deposits.

Jan 1, 2018

By Kioshi Mishiro, Pratima Jauhari, Walter Williams

INTRODUCTION The UN-General Assembly adopted an Agreement on 28 July 1994 entitled ‘Agreement relating to the implementation of Part XI of the United Nations Convention on the Law of the Sea ((UNCLOS) of 10 December 1982’. The Agreement came into force on 16 November 1994, and consequently, the inauguration of the International Seabed Authority (ISA, or the Authority), located in Kingston, Jamaica. The Authority is the organization through which States Parties to the Convention (168, as of 25 July 2017) shall, in accordance with the regime for the seabed and ocean floor and subsoil thereof beyond the limits of national jurisdiction (the Area) established in Part XI and the Agreement, organize and control activities in the Area, particularly with a view to administering the mineral resources of the Area. The legal regime for the administration and development of the mineral resources of the Area as it now exists are available in Part XI of the Convention1 which contains the legal framework governing “activities in the Area” and in Annex III to the Convention which contains the “Basic Conditions of Prospecting, Exploration and Exploitation” with respect to the resources of the Area2. The 1994 Agreement relating to the Implementation of Part XI of the UNCLOS is the so- called ‘parallel system’; as elaborated in article 153 of the Convention. The essential elements of the ‘parallel system’ include assured access for States parties and their nationals to seabed mineral resources along with a system of site-banking, whereby ‘reserved areas’ are set aside for the conduct of activities by the Authority through the ‘Enterprise’ itself or in association with developing States or in joint venture with the contractor who provided the particular reserved site2.

Jan 1, 2018

By J. C. Wiltshire

Both ferromanganese crusts and nodules present potential processors with enormous volumes of tailings of dubious environmental character: most processing scenarios fail to utilize the uneconomic manganese itself, leaving a total waste volume on the order of 96% of the incoming ore. Each current disposal proposal seems flawed: (1) backhauling to the initial mine site is costly and might run afoul of EPA or UN marine dumping*regulations, (2) subsea disposal near a coastal processing site means almost inevitable community opposition, (3) agricultural soil amendment for improving barren lava or coral rubble appears to require prohibitive amounts of supplementary phosphate, and (4) the slag resulting from an energy intensive pyrometallurgical processing may have potential as road ballast, but few processors will opt for smelting in all but those locales where energy is very cheap. This unfortunately rules out a smelting operation in almost any Pacific Island environment. We envision at least one other scenario which could result in both the removal of tailings from a processing plant and an increase in the supply of useful building materials at little or no cost to either the processing or construction industries--transforming a tenacious waste into a novel resource. Ongoing experiments have demonstrated considerable potential for turning acid leach tailings into dark composite facing stone, fancy black tile, novelty ceramics or concrete aggregate. The tailings are commonly very fine grained and may also serve as an additive in drilling mud. Applications as an additive to asphalt also need to be explored. The metal scavenging nature of ferromanganese minerals should be considered as a radioactive waste disposal matrix. There is no doubt that the greatest challenge will be

Jan 1, 1991

By Toru Yamasaki

"Bimodal lithostratigrafic assemblages are of significance in volcanogenic massive sulfide (VMS)-hosted lithology. The largest deposits are either bimodal-siliciclastic or maficsiliciclastic, and the presence of a significant siliciclastic component in the host stratigraphic succession favors large VMS deposits (e.g., Franklin et al., 2005; Barrie and Hannington, 1999). In the case of modern sub-seafloor VMS deposits in arc-related settings, the majority of deposits have been discovered in association with calderas or cauldrons (Halbach et al., 1993; Ishibashi and Urabe, 1995; Iizasa et al., 1999). These features are formed by the explosive eruption of silicic volcanoes, so that silicic host rocks and/or pumiceous volcanic clasts are generally observed around the ore deposits (e.g., Binns and Scott, 1993; Fiske et al., 2001). Caldera-like and graben-like morphological features therefore attract attention in geophysical surveys. However, silicic lithologies (dacite and rhyolite) normally contain only small amount of metallic elements (e.g., a few ppm to a few dozen ppm of Cu), whereas mafic rocks, such as basalts and basaltic andesites, contain significant amounts of metals (e.g., a few hundred ppm of Cu). Thus, the origin of metallic elements in VMS deposits associate with the silicic host rock remains unclear.The Iheya North Knoll is a volcanic complex in the middle of the Okinawa Trough. It is located in a young and actively spreading back-arc basin that extends for 1200 km behind the Ryukyu arc-trench system (Lee et al., 1980; Letouzey and Kimura, 1986). Several active hydrothermal fields have been recognized in the Iheya North Knoll. Mineralization at the Iheya North Knoll is characterized by relatively juvenile features consisting of VMS deposits with associated hydrothermal alterations to various degrees. Massive sphaleriterich sulfides at this site, recovered for the first time from beneath an active seafloor hydrothermal system, strongly resemble the black ore of the Kuroko deposits of the Miocene age in Japan (Takai et al., 2011). From February 11 to March 17, 2016, the SIP CK16-01 (Exp. 908) D/V Chikyu cruise was conducted at Iheya North Knoll and the rifting center of the Iheya Minor Ridge area, middle Okinawa Trough. The Iheya Minor Ridge area is also an active hydrothermal field, located ~30 km southeast of the Iheya North Knoll. In this area, basaltic rocks are widely distributed, and drilling has confirmed that the basaltic materials continue to ~120 m below the seafloor (Kumagai et al., in prep)."

Jan 1, 2017

By Andrea Koschinsky

Recent technological breakthroughs in the fields of ceramics, medicine, aerospace engineering and electronics (semi- and superconductors) are constantly creating new uses and an ongoing increasing demand for a variety of rare valuable trace metals. These so-called high-tech elements such as hafnium (Hf), titanium (Ti,) niobium (Nb), tantalum (Ta), zirconium (Zr), molybdenum (Mo), vanadium (V) and the rare earth elements (REE), many of them of strategic importance, occur inter alia at elevated and potentially economic concentrations in marine ferromanganese nodules and ferromanganese crusts, making those deep sea deposits potential future resources of these metals. As these metals are mostly present in the lattice of the manganese and iron phases, which are strongly intergrown, rather than in separate mineral phases within the nodules and crusts (Koschinsky and Hein, 2003), reductive dissolution of the host phases is a prerequisite to release and dissolve the valuable metals. To evaluate the association of these rare valuable metals with their mineral carrier phases, sequential leaching experiments were carried out on selected samples in a first step in our project.

Jan 1, 2011

By LeRon E. Bielak

The marine minerals program of the Minerals Management Service (MMSI has undergone significant changes during 1991. Formerly the Office of Strategic and International Minerals, the program has been renamed and invested with additional responsibilities. The new name, Office of International Activities and Marine Minerals, (INTERMAR) reflects its dual mission. INTERMAR&apos;S role in the international area was broadened in January 1991 to provide the MMS with a focal point for identifying and coordinating international opportunities of mutual interest and benefit. Opportunities include energy and nonenergy minerals and a broad range of areas such as resource and environmental assessment and management, structural and operational safety, royalty management, regulatory matters and public affairs. Cooperative efforts involving information exchanges, training programs, research, and similar arrangements are receiving particular emphasis. Australia, Canada, France, Japan, Sweden, the United Kingdom and the USSR represent a growing list of countries with whom arrangements have been established. Support has also been lent to other Federal Agencies and the United Nations in areas where MMS expertise and resources can impart a significant contribution. Opportunities will also be explored which involve Pacific insular areas.

Jan 1, 1991

By Luc Rombouts

The resources and reserves calculation of marine diamond deposits should be based on a systematic sampling grid. The distribution of the sample grade results tends to be very skew and has a large variance. A bias is easily introduced due to the fact that the grade distribution of the samples is very different from the grades of the area of influence. The temptation is always there to extrapolate the highest grade samples simply to their area of influence. If this is done, the higher grade areas will be systematically overestimated, while the lower grade areas will be underestimated. Such a bias should surely be avoided by weighing the sample grades in such a way with their neighbours, so that the estimated grades have a similar distribution as the grades of the blocks. The grade distribution of small mining blocks tend to be lognormal-like. If the coefficient of variation is known, i.e. the standard deviation divided by the mean, then the grade distribution of the small mining blocks is relatively well-defined. The distribution of the diamonds within the deposits can be simulated, based on the histogram of the sample results and on the semivariogram. The diamonds tend to cluster in trapsites. From the semivariogram and the histogram, the average size and spacing between trapsites, and the grade distribution within the trapsites, can be calculated using the model of the General Family of Discrete Distributions. Using such a simulated deposit, the grade distribution for different block sizes can be obtained. The grade distributions become more lognormal-like with increasing block sizes, as the trapsite effect is reduced.

Jan 1, 1998