Search Documents

By D Millette, F Gay

Surface tailings are finely ground waste materials produced in all mines after the mineral or metal has been removed from the metallurgical process. Current methods for disposal of tailings involve constructing dams, dumping into existing waterways, and depositing as backfill underground. Each method has its drawbacks in terms of cost, level of complexity, safety and environmental concerns. Backfilling is the process whereby waste material (generally metallurgical tailings, prepared aggregates or a combination) is placed from the surface back underground into open mine workings via conveyor belts, hydraulic or pneumatic pipes or gravity. In the backfill process common difficulties are expensive placement costs, equipment wear and the ability to meet early and long-term strength requirements. Traditional tailings transportation in pipes involves the use of water as the transport medium. Foam technology involves the introduction of micro-air bubbles that replace the water as the main transport medium. This air can be removed after placement if necessary, by the addition of a defoaming agent. This could produce an under-saturated stable cake. Foam technology has the potential to revolutionise surface tailings disposal and backfilling by providing a less expensive and environmentally safe alternative to those just described.

Jan 1, 2000

By Johnson G. D

Confidence in Yakabindie becoming a truly cost competitive nickel project has risen recently because of: ò the emergence of an economically effective contract mining climate; ò the delivery of cheaper energy via the Goldfields Gas Pipeline; and ò the development of the Yakabindie Process for production of nickel cathode and cobalt by-product directly from sulphide concentrates at site, dramatically cutting capital and operating costs compared to the conventional route. Development of the Yakabindie Process was a result of 'necessity being the mother of invention'. Yakabindie can now break out of the trap of relying on existing downstream processors to treat an intermediate, and instead the project can gain direct market access. The very attractive cost advantages demonstrate that hydrometallurgical processing of sulphide concentrates is a worthy prize. Improved cobalt recoveries, and tolerance of higher levels of magnesium and arsenic than allowable by smelters, are further advantages of this approach. Leach residues are combined with much larger quantities of naturally alkaline flotation tailings and remain at site. As a result the process is more environmentally sensitive than the conventional smelt/refine route, with no sulphur dioxide gas emissions and 'metal only out the gate'.

Jan 1, 1996

This paper explains why the valuation of mining assets is often a very different exercise from the valuation of the shares in the mining company which owns those assets. The fundamental reason for this is that mining assets, and the shares of the company which owns those assets have different risks. In order to properly value mining securities it is essential to: ò ensure all the different risks and other factors which impact on the value of the mining assets and the value of the shares are taken into account; and determine the extent to which the different risks and other factors are addressed in the value of the mining assets and the value of the shares so as to avoid double counting or not counting at all. If the alternative, but far from consensus, view is accepted that the correct valuation methodology to apply to shares in mining companies should be based on option pricing theory then conventional valuation practice of both mining assets and shares in mining companies will need to be fundamentally reassessed.

Jan 1, 1994

We often read and hear, especially in the United States, that we are running out of critical metals. These are vague forebodings of stagna- tion or winding down of our civilization. Our technological progress has been rapid in the last 50 years and is still advancing at an accelerated rate, and predictions of its long-term impact on consumption and production of metals are more hazardous than ever in the light of the great economic and political shifts that are bound to continue. There are many factors that will have a hardly predictable but profound effect on pro- duction and consumption of metals over a time span of, say, 25 years. Among such factors are recycling, substitution, availability of capital, direct involvement of governments in financing and production, and the capability of producing much lower grade ores at possibly much higher prices relative to costs in the event of scarcity. I must state at the outset that my discussion of this topic does not take into account the role that deep-sea nodules containing copper, nickel, cobalt, and manganese may play, because I don't believe production from these deposits will be of much significance within the 25 year span I will be discussing.

Jan 1, 1978

By Gutsche O, Kapur PC

Experimental data on the production of fines as a function of specific grinding energy consumption show that in general the energy utilisation in a choke fed high-pressure roll mill is higher than in a ball mill, but lower than in the single-particle mode of comminution under slow compressive loading. There is some evidence to suggest that the presence of water in feeds improves the energy efficiency of pressurised roll milling somewhat. Within a wide range of energy input, the size distributions of the ground product are self-similar, the logarithmic median size decreases linearly with the amount of fines produced and the inverse of the median size increases linearly with the energy spent. The production of fines as a function of energy expended follows essentially the same pattern as the one frequently encountered in media mills. The kinetics of grinding in the high-pressure roll mill can be simulated satisfactorily by modifying the standard particle population balance equation in order to account for energy dissipation in the tightly compressed bed. Common characteristics and important differences in grinding by the media mill and the high-pressure roll mill are highlighted.

Jan 1, 1993

By H R. Watli, K L. Davies, J A. Johnson

Novel microbial isolates that readily oxidise iron and sulfur were recovered from samples collected from a spent chalcopyrite/pyrite test heap. Methods were developed to enrich and isolate microbes that thrive in low pH environments and utilise iron and/or sulfur as sources of energy. Screening of these isolates revealed diverse substrate utilization (sulfur, ferrous ion, chalcopyrite, pyrite, glucose) as well as growth at temperatures between 30 - 50¦C. When native isolates were employed, shake flask leaching tests of chalcopyrite concentrate resulted in higher copper yields in comparison to laboratory reference strains Acidithiobacillus ferrooxidans (DSM 583) and Sulfobacillus thermosulfidooxidans (DSM 9293). After 700 hours several native isolates had leached between 20 - 30 per cent more copper than laboratory reference strains during experiments conducted at 45¦C. This research has established a unique culture collection of mining microbes that readily adapt to Australian conditions. Exploitation of these microbes may result in improved leaching kinetics and copper recovery from Australian chalcopyrite ores as demonstrated from shake flask leaching tests. Whilst this research provides a capability for Australian mineral sulfide ores, this technology can be easily adapted to suit ores of any origin resulting in more effective and efficient microbial leaching.

Jan 1, 2004

This paper quotes the results of many years of experiments and observations concerning ore drawing from mining blocks in major ore deposits mined by bulk induced caving of ore and country rock. Numerous laboratory and commercial test results of Russian, Ukrainian and Kazakh mines have been used and processed. Over 35 per cent of all ferrous, non-ferrous and other ore mined in the Russian Federation by the underground method is drawn underneath overlying caved rock (including ore drawing after bulk caving of pillars). The complexity of the process denies a logical or engineering calculation answer to many commercial production questions. Hence the massive research of ore drawing issues targeted at ore recovery forecasts in specific instances in order to assess an engineering solution or to define the design or planned ore draw performance. At first, the conditions were pictured as ideal. Subsequently, it was attempted to take into account the side contacts of ore with the country rock and the caved barren rock, the small size stuff in the caved rock, the unevenly loosening ore, end draw, and so on. The ore draw information available provides ample qualitative characteristics of the phenomena and only approximated and partially quantitative characteristics for individual cases. Many specific situations require individual studies of subject specific models.

Jan 1, 2000

The subject of the present paper will be combustion of fuel and as the combustion of fuel requires a certain amouut of air to effect combustion the question might be asked what is air?Air is composed, we will say, principally of two gases, oxygen and, nitrogen, but our business is with the former gas, and its leading feature as a supporter' of combustion. In point of fact no fire will burn without its presence, nor can animal life be sustained when this gas ls absent, because it is the life-sustaining element. For example, if we take a piece of charcoal, which is pure carbon, and burn it in the open air combustion takes place in the union of the carbon of the charcoal with the oxygen of the air, forming the compound known as carbonic acid (0.0.)The rust we see on iron and other metals is a kind of slow combustion, which is termed oxydation. When oxygen unites with any other element heat is given off in the process, and it may be here stated that the most intense heat is produced, by burning the two gases-oxygen and hydrogen in precisely the same proportions as that forming water.

An investigation was performed to determine the sequence of events which caused the 1987 surface subsidence and related damage to several homes in Walker County, Alabama, USA (see Figure 1). Surface affects compared to mine maps indicated the subsidence to be mine related. However, two coal seams had been worked under this area. The upper seam, the American seam ranged from 250 to 280 feet beneath the surface in the area in question. It was mined-out before 1955 by room-and-pillar method leaving in place narrow-long pillars to support the overburden strata, and abandoned in 1955. The lower seam, the Mary Lee seam, ranged from 650 to 700 feet beneath the surface. The Mary Lee seam had been abandoned in 1966 and subsequently became flooded. The dewatering of the Mary Lee seam workings in 1986 caused the submerged pillars to be exposed to the atmosphere. Due to multiple seam mining and the fact that workings had been inundated then dewatered, a subsurface investigation ensued to determine the sequence and ultimate cause of surface subsidence. Core sample tests with fracture analysis in conjunction with "down-the-hole" TV camera inspections provided necessary information to determine that the subsidence started in the lower seam and progressed through the upper coal seam to the surface. Evidence from the investigation program established that dewatering of the lower seam workings caused the marginally stable support pillars and the roof to collapse. This failure triggered additional subsidence in the upper seam which broadened the area of the influence at the surface.

Jan 1, 1992

THE Great Fitzroy Mines Limited, comprising an area of 183 acres, and held under lease, are situated at Mt. Chalmers, within the Cawarral goldfield, 18 miles from the city of Rockhampton, Queensland, on the Rockhampton-Yeppoon railway.The nearest railway station i; Mt. Ohalmers, distant about half a mile from the mine, with which it is connected by a fairly good road. The outcrop of the ore-body consists almost entirely of ironstained quartzite, no sign of copper being visible. The outcrop and its immediate vicinity have been worked intermittently for gold during the past :fifty years, the ore being amenable to battery treatment.About twenty years ago a company was formed to prospect this outcrop, and work was commenced by driving an adit, but the results proved disappointing, and work ceased. Later a party of prospectors sunk a winze from the adit level, which has sincedeveloped into wh~t is now known as the North shaft. The property was afterwards prospected by Messrs. Oharley and Osborne, who continued sinking the winze, meeting with sulphides at a depth of about 120 ft.The Mt. Chalmers Copper Mining Company was formed to work the property, and smelting operations started on a small scale. These, however, met with ip.different success, and the property was again abandoned.

Jan 1, 1911

Over the past 18 months the De Beers Consolidated Mines Ltd operations have made a concerted effort to move away from using the traditional shock tube initiating systems. These systems are being systematically replaced by the use of electronic delay detonators (EDD). Various trials were conducted in both host rock and kimberlite rock masses to improve tunnel advance as well as to optimise delay timing during trough openings (Ngoma et al, 1999; Mohle, 1999; Baltus, 2000). The high cost of EDDÆs, when compared with traditional initiation systems, led to a number of detailed studies being conducted on the mines where EDDÆs were being used. These studies aimed to quantify the additional benefits when blasting with electronic detonators. The studies showed that the change was justified on the basis of increased quality control and reliability gained through the use of EDDÆs. However, these benefits attract other related benefits, like fragmentation control, and backbreak reductions. When compared to the shock tube initiating systems the increased development face advance and the reduction of oversize during production blasting using EDDs, compared favourably to the less costly systems. As blasting engineers gained experience and confidence in the use of the system bigger blasts were initiated in mass under-cut blasts and slot raise development, by using multiple hole firing and second delay periods between holes. In the open pit and sublevel open stope mining methods the control of the fragmentation distribution and the effect of the mass of explosive detonated during a blast is detrimental to the loading and hauling production rates and the stability of the rock mass behind the blast. With a stable rock mass the bench cutting can be executed to establish steeper overall slope angles leading to large cost savings due to a reduction in waste stripping. It is the purpose of this paper to indicate through quantification that the use of the EDDs as an initiating system improves all-round blasting performances and assists in meeting customer requirements. The customer being the ore treatment plant.

Jan 1, 2001

Cyanidation tests by bottle agitation were conducted on an oxidized lead-silver ore containing approximately 12% Pb and 500 g/t Ag. Over 60% of the silver was leached when the ore was ground to 100% passing 0.15mm, whereas 50-60% of the silver was leached when the ore was only ground to 100% passing 0.5mm. Slurry handling and dewatering at the fine grind size were very difficult due to the high clay content of the ore, however this problem was greatly reduced at the coar- ser grind size. The silver recovery at the fine grind size was very dependent on cyanide solution strength with stronger cyanide sol- utions (containing more than 0.1% NaCN) re- sulting in lower solution silver contents. This was thought to be due to the precipi- tation of leached silver by zinc, which was also leached from the ore by the higher cyanide levels. There was a critical zinc level in solution of approximately 1000ppm, above which the silver recovery fell markedly. Cyanide and lime consumptions for this ore were high (typically 5 kg/t and 40 kg/t respectively), hence the processing of this particular ore by cyanide leaching is un- economic at current silver prices.

Jan 1, 1987

By E Wan, K Stokes

Since 1978, the nickel concentrator at Leinster has been subject to continuous change. In 1971 a significant nickel sulphide deposit was discovered on Leinster Downs Station, within three years the extent of the deposit was determined. In 1978 the Agnew Mining Company began production of nickel concentrate from the Perseverance Mine and continued to do so until production ceased in 1986. In 1988 WMC purchased the mothballed project and began the first phase of many expansion initiatives. Milestones in the life of Leinster have included:open cut mining of the Perseverance orebody and the discovery of the RockyÆs Reward orebody, as well as the metallurgical challenges in treating each of these; underground mining at both Perseverance and RockyÆs Reward; construction and commissioning of the WMC grinding and flotation circuits; variations in the reagent schemes, including the introduction of æliquidÆ reagents; development of mill linings to reduce maintenance; circuit re-configuration and simplification; development of Harmony open cut; strategies for increasing throughput at the drier; and changes to tailings facilities to cope with increased throughput. This paper outlines the steps which have been required to expand the Leinster Nickel Concentrator from 650 000 tpa to 2.5 Mtpa and those steps which will be required in the future.

Jan 1, 2000

The torsion test is considered as the best test used when the part is subjected to static or dynamic torque. Many published papers have investigated the torsion of non-heat treated metals. However, very few published papers dealt with the torsion behaviour of heat treated metals. The aim of this work was to study the effect of heat treatment on the torsion behaviour of steel alloy (AISI 01), which can be used for manufacturing small and medium drills, taps and reamers. The diameter of specimens used was 15 mm. The metal used was heat treated under different conditions, then torsionally tested. The results of torsion test were divided into two groups: results obtained during elastic limit from which the shear stress, shear strain and modulus of rigidity were calculated, while from the results obtained during plastic limit the plastic depth was calculated by applying derived equation when the angle of twist was more than yield value. The results obtained indicated that the value of hardness alone is not sufficient to establish heat treatment conditions. Rather, it was found that the determination of plastic depth together with hardness can help in the establishing of the optimum condition which was hardening temperature of 820¦C, hardening time 20 minutes and tempering temperature 220¦C. This condition produces hardness of 60 HRc and plastic depth of 2.5 mm.

Jan 1, 2003

By G Mulder, M Adams

Since the introduction of raiseboring 30 years ago there have been many operational and mechanical design improvements in the raiseboring machine, its reamers and associated cutters. These have now made the technology of raiseboring a routine and practical operation within the underground mining world. Over the last decade these advances have been aided by the introduction of robust automation packages which have allowed unattended drilling and reaming, real time performance monitoring and enhancement and the rapid diagnostic investigation of mechanical and electrical abnormalities. The constraint to higher raiseboring performance is now the drill string. However when it comes to a cost-effective solution of applying the high drill string torque and tension necessary for the next step change in performance, designers have æhit the wallÆ. Whilst carbon fiber reinforced plastic composites with abrasive resistant sheaths may offer a solution, the limit of conventional steel, drill string technology has been reached. This limit to advancement is however based on the drill string being in tension and alternative solutions may exist by literally turning the raiseboring paradigm on its head. This paper describes the story of a small Australian company engaged in the design and manufacture of mechanical excavation machines, two Australian raiseboring contractors and three Australian mines going against tradition and pushing down rather than pulling up.

Jan 1, 1998

The æProfit Driver ModelÆ is a tool which builds costs from first principles and integrates revenue, costs and physical mining parameters and, hence, can quantify the impact and leverage on profit. In this paper an æexample mineÆ has been created to represent a typical Australian Open Cut Coal Mine. This has then been input into the Profit Driver Model to allow different variables to be tested. A series of variables were tested to determine which ones had the highest impact on profit and results are useful to management as a guide to the areas in which they can focus effort to achieve better profitability. Whilst the highest profit drivers are those external to the control of management and include selling price and exchange rate, the next most sensitive are those variables related to the geology of the mine and the mining method. These included coal quality, yield and strip ratio. Site management has some control of these. For example, the ability to vary the sequence of mining or improve the yield by a more efficient coal washing process. The efficiency of the workforce and management has similar impact to the mining variables. Finally, there are the supply variables, such as fuel, labour and explosives which are the least sensitive although, cumulatively, still significant. Each mine is different and the results of the example mine will not apply to all mines. However, the approach taken is universal and the tool illustrates a simple method to quantify the profit impact when changing variables. The benefit of the approach is the short time taken to get a set of results. This allows the more detailed and time consuming work to be more focused. The results illustrate that management has a significant influence on profitability.

Jan 1, 2000

A significant resource of uranium has been discovered within a buried palaeochannel located in the south western corner of the Officer Basin of Western Australia by PNC Exploration (Australia) Pty. Ltd. The mineral- isation is redox controlled and is hosted by Eocene organic rich paludal sediments. Prob- able insitu reserves are 13,000 t of contained uranium with an average ore grade of 0.12% at a cutoff grade of 0.03% U. The Mulga Rock palaeochannel has been traced for at least 100 km beneath the Quaternary surficial cover. The main channel is horseshoe shaped with the channel arms vary- ing from 5 to 15 km in width. The western arm connects to the Lake Raeside-Ponton Creek drainage system, whilst the eastern arm'is open to the south. The headwaters of the palaeo- channel are thought to have been the Lake Minigwal drainage system, prior to its capture by the Lake Rason system. Differential.erosion of the basement rocks during the Late Cretac- eous to Early Tertiary strongly influenced channel shape and resulted in the main channel being confined to a Permian,mudstone filled valley. Upwards of 100 m of fluviatile sediments accumulated within the palaeovalley during a period of subsidence in the Early Tertiary. Three broad stratigraphic units have been re- cognised within the channel: 1. An upper unit of fluviatile sands with interbedded lacustrine sediments, which have subsequently been wholly oxidised and variably silicified and ferruginised. 2. A middle unit of lacustrine to paludal sediments, which host the main mineral- isation. 3. A basal unit of fluviatile gravels and sand. The presence of excellently preserved Nothofagidites in organic rich paludal sediments from the middle unit, suggest that unit was laid down in a non-marine, fluviatile, humid environ- ment during the Middle Eocene.

Jan 1, 1988

By D A. Williams

The conventional method of transporting mine tailings from a process plant to a tailings storage facility (TSF) is in the form of a low to medium density1 slurry, which can be pumped using centrifugal pumps. Over the past several decades, therefore, mine operators have generally adopted this default approach. There are, however, some convincing arguments why consideration should be given to thickening the tailings slurry to a higher density paste consistency. In particular, the minimisation of environmental impacts, the reduction in water consumption and the cost savings relating to TSF closure make paste an attractive option for the life of mine tailings disposal. There are several environmental impacts that are associated with a conventional slurry TSF, such as land sterilisation, aesthetics, dust, seepage and acid mine drainage. Some of these impacts, such as dusting, may be difficult to mitigate while the TSF is in operation. Others can be influenced by adjustments made to the tailings slurry density at the plant. Unplanned fluctuations in slurry density and/or viscosity can have a significant influence on TSF performance and can exacerbate the environmental impacts relating to the facility. Relatively minor changes in the solids content of the slurry can affect tailings beaching behaviour, degree of segregation, position of the phreatic surface, amount of freeboard, consolidation behaviour, placed (settled) density (and hence TSF capacity) and in situ strength of the tailings. Paste is a non segregating slurry and many of these effects can be minimised at the TSF when the tailings slurry is thickened to a paste. These improvements are manifested by reduced seepage, flexibility in selecting an appropriate final landform, ability to rehabilitate progressively and reductions in plant water usage. It is possible to minimise environmental impacts of a TSF through the use of tailings paste. Ideally the paste production plant should be part of the initial design of the process plant. However, significant benefits can be gained by adding a paste production plant at some time later in the operational life of the mine to reduce environmental impacts and facilitate an environmentally acceptable TSF closure.

Jan 1, 2002

One common public perception of mining is that financially it is an extraordinarily risky business. Another and contrary view, in certain circles, is that price risk and other financial risks can be relatively easily removed or shifted by a number of schemes or devices. In reality, beyond the orebody discovery stage, mining need not be any more risky than most heavy industrial businesses. Nevertheless, as stated by Rappaport, (1986): Risk is a parameter of central importance in establishing the economic value of any asset. The level of risk is determined both by the nature of the firm's operations and by the relative proportions of debt and equity used to finance its investments. These two types of risk are commonly referred to as 'business risk' and 'financial risk' respectively. The term financial risk is used somewhat more loosely herein to recognise the reality that any risk inadequately addressed in the design, construction and operation of a mining project can have significant financial consequences; usually negative. For instance, a specific area of business risk in mining is often called technical risk which definitely has severe financial consequences if not managed correctly. The various risk shifting, hedging and risk management tools available all have their place and range from merely useful to almost indispensable. However, in the long-term, financial risks are maintained at acceptable levels by the application of sound, more fundamental business management principles. There are many with a vested interest in perpetuating a perception that the conceptual foundations of sound management practice are extremely complex. In reality, most management concepts are prosaic, but their application requires incredible discipline and hard work. There is no magic formula or 'silver bullet'. It appears that a company whose activities are restricted to mining can analyse the range of risks specific to mine development and operations more clearly than companies in which mining is just one of many businesses. The almost universal failure of large oil companies in the mining business is probably the best example of lack of any clear comprehension of fundamental business characteristics and risks. Conversely, in regard to risk management, choosing to be in other business as well as mining does nothing to reduce the risks of the mining business. The individual shareholder can probably make such 'diversification of portfolio' decisions better than most management teams. It could be argued that diversification across a number of disparate businesses may actually increase overall corporate risk due to lack of management concentration and focus. These differences between the perceptions of financial risks and the realities in mining need to be further elaborated in relation to some uncompromising business concepts.

Jan 1, 1994

By G P. J Dijkema, M A. Reuter

From a material cycles perspective all processes are interconnected and consequently a process can never be evaluated as an isolated and independent unit. This also holds true for the evaluated co-incineration options. Environmental and sustainability issues for example, such as raw material and energy utilisation or air pollution, are a resultant of the whole system of industrial activities. It is therefore important, not to optimise a single process or industrial activity, but rather the whole system. Although engineering procedures for the design of individual industrial units are well developed, the problem of determining the best arrangement of these interconnected units is often far more difficult. Regulation that manages the arrangement of the units for waste processing is still under construction. In the evaluation of co-incineration, analogous principle from process control can be used: feedforward control. This principle includes the determination of which outlets can be used for all process outputs, hence avoidance of any æunusableÆ products or wastes possibly arising from co-incineration. To establish the extent, to which produced wastes are usable, a system overview is necessary, in addition to in-depth information on the subsystems, which produce and can consume wastes. Material cycles modelling can be used as the basis for a tool that supports the development of a suitable playing field. It should provide overview of the system and in-depth information on its subsystems. This tool then represents an attempt to bridge the gap between æholisticÆ industrial ecology and process engineering.

Jan 1, 2000