Search Documents

Article I1 of the RMCMI Bylaws reads: Section 1. Classes. The membership of the corporation shall be divided into three classs, consisting of active members, life members and senior members, who shall have such rights, privileges and qualifications as these bylaws may provide. The names of all active, life and senior members, together with current mailing addresses, follow. [Lt. Jay Abbott M. L. FOSS Co. 7458 S Jackson St Littleton. CO 80122 Lt. Ronald H. Achziger Midwest Rbr & Sply Co 6404 E 39th Are Denver, CO 80207 ]

Jan 1, 1986

[Proceedings VOL. II. PART V. CONTENTS PAGE Mine Haulage, by R. A. McAllister-----------------145 Efficiency in Shot Firing, by Robert A. Marshall -- 149 Some Facts About Coal Mining, by Sam Andrews -153 Flexoid Tubing and Its Application to Coal Mines As a Means of Temporary Ventilation, by George A. Brown -161 Longwall Coal Mining, by Thomas Collier ------ 163 Advantages of Having Such Men as Fire Bosses Under State Rather Than Corporation Jurisdiction, by R. S. Morton ---- 165 Longwall Mining, by Parley Potter -------169 DeWatering of the Rouse Mine, by D. A. Stout ---175]

Jan 1, 1921

CHAIRMAN LITTLEJOHN: Some of the members will want to question Mr. Farnham on some of the things he has brought tip, so we will throw the meeting open for discussion. I am quite sure Mr. Farnham will be willing and glad to answer any questions that may be put to him. MR. HOLMAN: I would like to ask Mr. Farnham a question in regard to the Duckbill: How wide a face will it operate without moving the bill? MR. FARNHAM: The Duckbill is a device that was developed in the Union Pacific Mine at Rock Springs, within the last few months, and it is shaped something like, a dustpan, with discharge throat in the rear. They made one seven feet wide and found it was too wide, and the one they are using now is between three and four feet in width. The front section of the conveyor, which attaches to the duckbill, meshes into it to form a sliding section, and the front end of the Duckbill is pushed by the upper segments. I saw one used in a room twenty-four feet wide, and they drew it back after they cleaned out one room and pushed it forward again. MR. HOLMAN: You have no arrangement other than ratchet work? MR. FARNHAM: The ratchet is for forward working and back; the sections are made 12 or 13 feet long, and the stroke of the conveyor automatically works the ratchet; they can ratchet it back; it is a hand device. MR. HOLMAN: They just swing the end of the conveyor across the face to pick up the loose coal? MR. FARNHAM: Yes; they are also planning to use it endwise along the panel face, that and the room work both are quite new in their application, and I do not think the Union Pacific is giving out any results as yet, because the system has not been in use long. MR. HOLMAN: We are planning on putting one in very shortly. MR. HALL: I understand they can swing it over 30 degrees one way or the other, and it goes the same way easily because of the continual jar of the back and forward motion on a 60-degree swing. SECRETARY SHUBART: Take on a comparatively long conveyor, you can get quite a sweep, a large part of the circle. The Duckbill could command quite a large range. For a 12-foot entry, take a four-foot wide advance through the middle of the shot coal, with a 12-foot advance, ratchet back, swing the Duckbill to the rib and repeat; but I do not think they could get as much as 60 degree. on the end of the Duckbill without curving further back. The conveyor is light and not normally set on any permanent foundation. I saw one of Mr. McCarty's first machines, a rather rudimentary one, clean tip a 12-trot entry, 21 tons of coal, in 16 minutes, three men at the face and one at the loading end. MR. FARNHAM: The average time to clean the entries is about an hour-to clean up good-it wouldn't take but a short time; that is why they get this record of several cuts a shift. CHAIRMAN LITTLEJOHN: Are there any other questions you would like to ask Mr. Farnham? MR. HOLMAN: We were discussing this entry driving in regard to the entry loader; an entry loader in advance work, just what you have to do to place the jackbars with the sheave-blocks? Do you dig along the ribs after the coal is shot or do you have any other scheme that could be worked out to a good advantage? MR. FARNHAM: This record is a report I have just received from our Chicago office, without the full details, which I have written for. I am sorry I cannot give you the details. This was an Indiana or Pennsylvania mine, near Pocahontas, not the one where they had an accident. I assume they set the jacks ahead and swung and dumped the coal partly out with a scoop and partly by hand, but the application for that for entry driving is entirely new. The reports stated that they anticipated using that as a standard method of entry driving in the future. I will be glad to see that you get a copy of it when I get the report completed. MR. MONAY: Mr. Shubart, did you say they loaded 12 tons in 16 minutes? SECRETARY SHUBART: Twenty-one tons. MR. MONAY: How long did it take to change the machinery out of there

Jan 1, 1926

WILLIAM P BALAZ RMCMI PRESIDENT 1990-1991 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 87th Regular Meeting and Convention to be held June 30, July 1 & 2, 1991 Keystone Resort, Colorado

Jan 1, 1990

MR. ENZI: hank you very much. I'm sure there?s a lot of you out there just realizing that Rock Springs and Gillette is not one city. I'm sure there's a lot of you wondering why a person from a town who has the image in the national media that the town of Gillette has is talking to you about image. I had a person this morning ask me if Gillette wasn't the end of the world. The only response I can give is "no, but you can see it from there." We have been researched a lot and, I realize, we've been very lucky because I've observed that researchers cause cancer in rats. In fact a wonder drug is one that has no effect on mice. In fact I've been thinking of posting a sign in my office that would read "due to the large number of interviews by journalists who already have their articles written, we would most respectfully request that anyone wishing to insult the city of Gillette, please limit themselves to 3,000 words or 15 insults, whichever is shorter." I don't know if any of you saw the article in Playboy about three months ago on the city of Gillette. What you probably don't realize about that article is that that was an attempt by Playboy magazine to see if they couldn't change their image to a national municipal magazine. I think it's important to know Gillette is the frontier city, a pioneer city, it's a shopping center for northeast Wyoming and most importantly, we're the energy capital of the nation. We're on the threshold of the Powder River Basin and we will be the nation's energy solution. Besides coal, we're, already the heart of the state's leading oil producing area and we have vast uranium resources. But I, want to tell you the biggest resource that we have is, the people who have come to live in Gillette. You will find Gillette a busy, young, pulsating community. We're experiencing the excitement of growth. We're welcoming a higher percentage of newcomers than any other town in the nation. Yes, growth to us is exciting. Where else can you get ten years of experience in two years? We realize you can't maintain the status quo. Growth can be painful but not as painful as the alternative, recession and depression. For a little bit of background, we are now at 16,000 people and we have another 4,000 people who live on the outside but look like they live on the inside. The Census Bureau says that we have, 11,225 people but we have that many people in a traffic jam on the Douglas Highway in one day. I?ll , tell you about a few things happening in Gillette. I think it's very important to emphasize that I didn't , do these things; it's the youth and the energy of the community that has done these things. Right now the city of Gillette has 32 major projects underway. We have water for 50,000 people and we're seeking more water. The city in 1975 was 1 .8 square miles. Last year alone we annexed I square mile. We build 10 miles of paved streets a year. For the last 8 years we've doubled our parks' budget. I

Jan 1, 1982

MR. HARRINGTON: I would like to ask Mr. Bottomley if they fire their shots while the men are in the mine? MR. BOTTOMLEY: No sir; the shot-firing law in our State requires the shots to be fired after the men are out of the mine. We fire more shots than we did under the hand method of loading. Where formerly four holes were drilled, now we drill eight, using the same amount of powder as we did formerly, perhaps a little more, but we use a slower grade of powder. CHAIRMAN LITTLEJOHN: Any further discussion, gentlemen? MR. GIBSON: Mr. Chairman, I would like to ask Mr. Bottomley, if, in his shot-firing system, as I understand it, he has a very high coal and is working something like eleven feet? MR. BOTTOMLEY: Something like that. MR. GIBSON: I read the article that you referred to. Did you use both the first and the second delay explo¬ders in shooting the coal? MR. BOTTOMLEY: We use the ordinary fuse. MR. GIBSON: That is what I wanted to find out; whether you use the delay exploders and the detonators. In Utah, we are getting away from the fuse altogether, because we do not think it is accomplishing anything to use the electric light on the cap, and' at the same time shooting with fuse. We are defeating the object we might gain in using the electric safety lamp. That is a point that might be discussed a little further. MR. E. H. JOHNSON, The Coloder Company: I would like-since it is a general opinion that mechanical loading breaks up the coal, to ask Mr. Bottomley, if he finds a larger percentage of small coal, or how much, through the use of the mechanical loaders? MR. BOTTOMLEY: We do not find any great difference. In fact, we have succeeded in improving our lump coal percentage, and that is important, because it is largely domestic. At first, when the machines were installed, the boys shot the coal too hard, and we fell down a little, about two or three per cent, the first month, in our lump percentage, and we tightened up a little and changed our methods in shooting and got on to the stunt of drilling more holes and getting a slower grade of powder. We could not load as much coal in one day as we could before, but we did succeed in in. creasing our lump coal percentage four and a half per cent over the hand method, and that is quite a factor-quite an important factor and since our domestic trade is over with, we loosened up on the shooting and we are running about the same as we did with the hand loading, maybe a half per cent more, or one per cent, but pretty much the same. MR. SHUBART: Your coal is very high? MR. BOTTOMLEY: Yes. MR. SHUBART: Have you tried sunbbing the coal before shooting? MR. BOTTOMLEY: No, we have not tried that. It is very hard coal to shoot; we have no defined cleavage in our coal. It is the worst coal I ever saw to shoot. We do not try to snub it. Formerly, as I said, the miners drilled four holes, pretty well up near the top, and then four holes down, within about three feet of the bottom. It is the same thing as a snub shot, and that we find is the best method for shooting the coal. We have not tried any mechanical device for snubbing as yet. SECRETARY SHUBART: At one mine I saw snubbing tried with a Jeffrey undercutter with a seven-foot Jeffrey bar. This mine, by the way, is very similar to Mr. Bottomley's condition. They have very high coal, so the snub cut is a small percentage. They cut a seven foot undercut and raise the machine on an eight inch tie and undercut five feet to give the effect of a snub cut, 14 inches at the front of the cut, and then six inches at the back of the cut. They made a very marked increase in lump. (The bug dust would be a small percentage of the total coal), and they increased the percentage of the slack at the same time. They found a decrease by reason of the easier shooting of about 15 per cent in their slack. In other words their nut and lump coal ran considerably higher and their slack decreased 5 per cent with the snubbing cut. Mr. Bottomley, I believe, understands those conditions.

Jan 1, 1926

By Geo. A. Murphy

MR. ARTHUR E. GIBSON (General Manager, Consumers Mutual Coal Company of Utah) : I suppose the reason I was called upon to read this paper was because I was at the mine for several years, but I have not been there for the past four years and the installation has been put in since I left. This article has been written by my successor-it follows: At the very urgent solicitation of your Secretary I have consented to prepare this paper descriptive of the spiralizing plant which is a part of the new steel tipple recently erected by the Spring Canyon Coal Company to serve its mines at Spring Canyon, Utah. I have been reluctant in giving this consent for two reasons: one of which is an excellent one, and the other isn't any good at all. First,, I find that it takes a long time to become familiar with the eccentricities of spirals-to get wise to their whims and peculiarities, and while this plant has been in operation for a number of months, something new seems to crop up nearly every time I see it, and -it would be impossible to describe all of these things even if I remembered them. The second reason is, purely personal. Among the many things I have learned by attending the sessions of the Rocky Mountain Coal Mining Institute is that if a man is not pretty sure of the ground he attempts to cover, he had better keep his mouth shut, because if he isn't right, he is dead sure to be called down by someone. However, as I will not attend the session, this feature will not hurt much, but it will make it necessary for someone else to read the paper and this will make it much better for those who are obliged to listen to it because I don't read English very well. To begin with I will say that what is said in this paper applies only to the plant under discussion as I have had no experience with any other plant. While spirals have been in use for quite a number of years, and there are some large plants in the East, their use has not been general, and I believe the plant at Spring Canyon is the only one in the United States west of the Mississippi River. The details of the plant were worked out by Mr. Thos. R. Stockett, General Manager of the Spring Can= yon Coal Company; it was manufactured by the Anthracite Separation Company of Hazelton, Penn., incorporated in the design and erected by the Link-Belt Company of Chicago, in connection with the balance of the tipple. It consists of five units. Each unit consists of a vertical wood column about 6 inches in diameter, and 9 feet 6 inches in height, around which the spiral is built. It is something like a triple screw conveyor, set vertically, with flights down which the coal and refuse travel by gravity in the process of separation. There are three of these flights, forming a sort of nest but about 7 inches apart, and they make 21 turns around the column in its length. These flights dip toward the column about 27 degrees; they have a uniform pitch downward of 31 degrees; they are 19 inches wide at the top (measured from the column) and taper gradually until they are about 9 inches at the bottom. They are not made with one continuous plate from top to bottom, but are made up of a number of plates. Some of these plates are slightly waved, others have small corrugations in them and still others are perforated with small holes, all of which are intended to accelerate or. retard the movement of the coal and refuse as they pass down, At intervals there are adjustable plates in the flights for the purpose of decreasing the maximum outside;

Jan 1, 1926

[Adams, Leonard E.819 Newhouse Bldg., Salt Lake City, Utah Adams, V. H422 East San Miguel. Colorado Springs, Colo. Allen, Earl W.2636 So. Gilpin St., Denver 10, Colo. Allen, Thomas State Coal Mine Inspector, State Office Bldg., Denver, Colo. Ambler, J. B P. O. Box 591, Denver, Colo. Apperson, A. B 394 Elm St., Denver 7, Colo. Arnold, G. O Phelps-Dodge Co., Dawson, New Mexico Audin, Abel Somerset, Colorado Audis, Clement, Jr. Paonia, Colorado]

Jan 1, 1948

By Scott Dupont

Due to the scarcity of miners, and the necessity of decreasing the cost of mining, the Phelps-Dodge Corporation, Stag Canon Branch, at Dawson, [ ] New Mexico, decided to try, by various methods of mining, to increase the tonnage of coal mined per man, per day. With this in view, they first tried mining on a 250-foot face, maintaining the track at the face and using six to eight men shovel- [ ] ling. These men were able to aver age from ten to twelve tons each per, day when they were loading, but with

Jan 1, 1926

By E. H. McCleary

The Alamo Mine The Alamo mine is located about seventeen miles northwest of Walsenburg, Colorado, on the Loma Branch of the Denver and Rio Grande Western railroad, in the foothills of the Black Mountains of Huerfano County. Prospecting Mr. W. B. Lewis of New York City, president of the Oakdale Coal Company and also president of the Alamo Coal Company first became interested in this property in 1920. After all natural features of the surface had been carefully examined by Mr. Lewis, he was convinced that the property was underlaid with coal seams. Plans for prospect drilling were made at once and this drilling was started late in 1921. In all, eight drill holes were put down to the Trinidad sandstone which underlies the coal measures in this field. These drill holes in general, showed very satisfactory results. Two workable coal seams were penetrated by most of these drill holes, the upper seam being six and one half feet thick and the lower seam having a thickness of ten and one-half feet. The two seams are separated by forty feet of sandstone and shale. Analyses of the seams proved each to be of a very high grade bituminous coal possessing hardness much above other bituminous coals, and having very bright lustrous appearance. Tests of more than a year's duration proved the coal to store excellently in closed bins and also in open bins where coal is exposed to elements. The drill hole data further showed the coal seams to pitch more than fifty per cent or about twenty-six and one-half degrees. The pitch direction being approximately South 65 degrees East. The drill holes further proved the coal seams did not outcrop at any point on the property, and no evidence of coal outcrop has been found in near vicinity. A splitting and pinching out of seams was found to occur some two hundred to three hundred feet of theoretical outcrop at very Western boundary of property. The most Easterly or No. 6 drill hole has a depth of eight hundred fifty feet to floor of lower coal seam. The Trinidad sandstone was found to be immediately under the lower coal seam, and the Pierre shales lying under this sandstone. Plans for Development and Sinking Having obtained sufficient data, plans for development of the property were carefully made sometime in advance of the actual opening of the mine. Every condition was carefully studied and the maximum production of clean and well prepared coal at as low a cost as possible during the entire life of mine was kept uppermost in the minds of all. The life of mine is estimated at approximately fifty years. It was decided to open up the lower and thicker seam first, and due to the pitch and other conditions a slope opening was decided upon for its extraction. The pitch of the coal having been found to be from fifty to sixty per cent or twenty-six to thirty degrees, the plan of driving the slope directly down the pitch of seam was eliminated and a plan that would give a more economical grade was decided upon. To obtain a lesser grade, a point several hundred feet west of-and at a less elevation than the theoretical outcrop of coal seam was selected for the slope opening. (Fig. 18.) To have driven directly down the pitch of coal seam would also have given the slope an uneven grade as the pitch of coal seam varied as it approached the crop. From this point of opening, the slope was to be driven on a thirty-one per cent, or' about seventeen degree pitch to intersect coal seam in No. 6 drill hole, a distance through the Pierre shales and Trinidad sandstone of two thousand five hundred fifty feet, the slope to be driven practically due East

Jan 1, 1925

By D. C. McKeehan

The use of electric power was introduced in this field in the year 1892. The initial installation being an engine-driven generator and one nine-ton haulage locomotive using 500-volts direct current. Reference to this locomotive appears in the issue of COAL AGE for February 24, 1921. For a large coal field, the conversion to electricity has been very complete, there being no compressed air machines in service and but one steam driven hoist, that at No. 1o mine and located within fifty feet of the present power plant boiler room. Two eight-ton haulage locomotives, installed in 1896 and still in use, justifies the service and the equipment. These mines used the pioneer types of electric cutting and drilling machines, the story of which is, no doubt, familiar to you. The extensive use of electric power began in 1900, when there was installed four 400 k.w., 500-volt direct current engine-driven generators. These were cross-compound machines and operated non-condensing. By 1910 the mines had developed main haulage entries of several miles in length and a working territory of about six square miles in area. The necessity of supplying adequate power at the working face required a local power supply from motor-generator sets in various parts of the mine to supplement the power furnished by the engine-driven generators. The power to these motor-generator sets was supplied by a 300 k.w. high pressure non-condensing turbo-generator delivering 2300 volts, 60 cycle, three-phase current. This marks the beginning of the use of alternating current for mining purposes. In 1913 new mines were being developed at Reliance, seven miles distant, and the plant was enlarged to accommodate a 750 k.w. low pressure, condensing turbine, utilizing the exhaust steam from the cross-compound engines and the 300 k.w. turbine. Transformers were installed for supplying Reliance with power at 13,200 volts. In the course of time the old engines began to dismantle themselves by throwing various pieces, such as cylinder heads, about the building, damaging walls and switchboards, and created a general feeling of unrest among those who had to do with power production. The limitations of the old engines that had given admirable service for ten years were recognized. The source of exhaust steam became questionable and in 1915, a 1000 k.w. high pressure condensing turbine was installed in order that a more general use could be made of motor-generator sets for the direct current supply. The plant at that time containing a 1000 k.w., a 750 k.w., and a 300 k.w., in alternating current generators, supplemented

Jan 1, 1921

The second annual RMCMI Mine Rescue Performance Evaluation was held in conjunction with the 1993 RMCMI Convention at Beaver Creek. [ ] Six teams participated in this year's evaluation; BHP Minerals, Navajo Mine, Fruitland. NM; BHP Minerals - LaPlata Mine. LaPlata, NM; BHP Minerals - San Juan Mine. Waterflow. NM; The Coteau Properties Company - Freedom Mine, Beulah. ND; Cordero Mining Company, Gillette, WY; and The Falkirk Mining Company - Falkirk Mine. Underwood, ND. The Western Energy Company of Colstrip, MT was represented through observers and evaluators. [ ] Realistic industrial related scenarios, closely simulating the stress of actual rescue incidents, were provided by members of the Eagle Valley Ambulance Service. Five different scenarios were presented to each team on the first day of the evaluation and three on the second. Each team was given the pertinent information to solve the problem as they assembled at the scenario site. The scenarios were going on simultaneously and each team was unaware of the circumstances until they entered the scene. Interested onlookers were afforded the opportunity of viewing the actual simulated rescue operations as they occurred. The teams received valuable pointers and direction from the ream of evaluators following each scenario. They were are also given the opportunity to observe the other teams in action and to meet with the members of all the teams to share information and ideas during team meetings per the predetermined schedule. The primary goal is to recognize current rescue skills, knowledge, and abilities of participating teams. In doing this, each team was provided with individual evaluations and a path for improvement as needed. Each team was recognized for their efforts at an awards breakfast on the final day of the evaluation. New innovations in rescue equipment were introduced and demonstrated for interested teams following the awards program. The importance of progressive training such as what we are witnessing at evaluations during the RMCMI conventions cannot be stressed strongly enough. These teams are the providers of immediate rescue and medical care for victims of accidents at their respective properties. Every mining operation has the potential for very serious accidents due to immense size of equipment and mining logistics. These rescue teams must be prepared to act with the most immediate, professional and knowledgeable actions to save lives and prevent further injuries. Safety is a primary concern of every mining operation and the mine site rescue team is an integral part of that safety effort. The evaluation program is very appreciative for the financial support of the following businesses to enable this program to continue: Safety Master, Acme Welding, North American Coal, Triune. Cummins, OK Tire. Modern Industrial, The Industrial Company, Mine Safety Appliances (MSA), Biomarine, Personal Safety Enterprises, Inc., and Blattner Construction, Thank you again for your much needed assistance. Plan to be a part of next year's Mine Rescue Evaluation Program as a participant or an observer. You will be amazed at the skill levels of the Rescue Teams. See you next year! Linda G. Ash The falkirk Mining Company [ ]

Jan 1, 1993

Jan 1, 1924

[Page Officers of the Institute 5 Minutes of Nineteenth Meeting 9 Coal Mine Explosions-William -Moorhead 11 "What Do You Mean-`Coal Dust'?"--K. L. Marshall 16 Discussion of Foregoing Papers 17 Shale Dusting-J. A. Smith 21 Discussion 25 Conditions That Make Coal Dust Explosive-T. T. Read 25 General Discussion 27 1-Mechanical Loading Review-Chas. Gottschalk 30 Mechanical Loading in Coal Mines-S. W. Farnham 34 Mechanical Loading Practice at Hanna, Wyo.-T. H. Butler 48 Guessing or Knowing! Which?-Eugene McAuliffe 52 Discussion of Loading Papers 54 Bumps or Squeezed Conditions in Coal Mines-Geo. A. Brown 59 Vertical Cutting-Thos. A. Stroup 62 Mine Fires-Thos. A. Foster 71 Membership List 74]

Jan 1, 1924

RMCMI members were welcomed at 12:30 p.m. by President McKeever. Following the luncheon held at the Conference Center, McKeever introduced Mr. Brooks Mitchell who is President, Human Resources Management, Inc. in Richardson, Texas. His topic was "Perspective on the Last Five Years. " The RMCMI Championship Tennis Tournament was held at the Marriott's Mark courts under the direction of Chairman Alan W. Czarnowsky and his committee members Mary Kay Aisenbrey and Jon Pratt. EVENING Tuesday, June 29, 1982 From 6:00 to 9:00 p.m. a Mini-Banquet was held for the young people of RMCMI members in the East Room of Lionsquare Gore Creek Lodge. The 6:00 p.m. time found RMCMI members gathered for a social hour at Marriott's Mark poolside, The Annual Speechless banquet followed at 7:00 p.m. in the Conference Center. After the dinner, President McKeever introduced the Golf and Tennis Chairmen who announced the prize winners. Robert W. Wilson, Chairman of the Nominating Committee, presented the following slate of officers for 1982-83: President, Vernal Mortensen; Vice Presidents-Colorado, Charles W. Margolf; Montana, Art K. Neill; New Mexico, Robert Diederick; North Dakota, James A. Brown; Utah, Bernard Bernstrom and Wyoming, John T. Goodier. It was moved by Loren V. Linville, seconded and carried that the elective ballot of RMCMI be cast for the officers as nominated. Mr. Wilson advised RMCMI that a successor to Mrs. Whiteside would be selected at a later date by the Committee and Executive Board inasmuch as Mrs. Whiteside's resignation had been received only ten days earlier and there had been no time for interviews. There being no further business, the meeting was adjourned at 9:30 p.m. MORNING SESSION Wednesday, June 29, 1982 President McKeever called the meeting to order at 9:30 a.m. in Salon A of the Marriott's Mark. New business included a report of the Auditing Committee and it was moved by Chairman Paul Hronich, seconded and carried that the Financial Report as prepared by the Treasurer, Mrs. Augusta Whiteside, be approved as submitted. The report of the Resolutions Committee was presented by Chairman Ed Ziolkowski who moved that certain resolutions be approved. The motion was seconded, carried and the resolutions follow: 1. RESOLVED, WHEREAS, in the year since the last convention of The Rocky Mountain Coal Mining Institute, the Institute and the coal industry have suffered the loss, through death, of the services of: John Chrystal Richard R. Fenner G. D. Grayer Albert M. Keenan C. E. Osborn Stanley C. Shubart George Sumers Cal Witmer NOW THEREFORE, BE IT RESOLVED, that there be recorded in the minutes of The Rocky Mountain Coal Mining Institute recognition of the passing of these members, who have so greatly contributed to the advancement of the industry, both nationally and in the Rocky Mountain area, and that a copy of this resolution be sent to the next of kin as evidence of the sincere and deep regard and sympathy of the members of the Institute. 2. RESOLVED, that in recognition of the faithful service to the coal industry generally, and to this Institute in particular, the status of Life Membership in The Rocky Mountain Coal Mining Institute be hereby conferred upon these members: John T. Leech George C. Lindsay A. George Setter

Jan 1, 1982

By C. B. Huntress

"We have ourselves to blame in the steel industry for our condition." These words were addressed twelve days ago by James A. Farrell, President of the United States Steel Corporation, to his "comrades" at a meeting of the American Iron and Steel Institute. They carry a note of challenge to all industry, and particularly to the coal industry, where they point the way to the pressing need for operators everywhere to get their feet under one table. It is that note which I would stress to all producers. You have yourselves to blame for your condition. True, there are inter-district competition and competition of substitute fuels, but they'll always be with us, more or less, and the only sensible, sane course is to remove the evils within our respective districts, which can be done only by constructive effort along cooperative lines. It's the same story in Alabama, the same in Illinois and elsewhere. The larger number of the men gathered here are at the front, as it were, in the business of mining coal. They are the men who are doing a remarkable operating job. And naturally, the sessions of this annual meeting treat of news from the front, of technical problems. But, as in actual warfare, those at the front are often uninformed of developments in the rear. They keep on fighting without fully sensing the significance of a disaster at headquarters. You've played your eighteen holes today and evidenced the efficiency of your technique in the, production of coal. It is not amiss to take advantage of this moment, the nineteenth hole, to ponder over what it's all about. After all, what do improvements in the art of mining mean if business policies engulf you in red ink? To the extent that mechanization is a factor in increased overhead, which in turn increases the pressure to produce regardless of market demand, it only aggravates our troubles unless there is the controlling influence of coordinated effort.

Jan 1, 1931

By Todd A. Myers

Forward Looking Statement Disclaimer This presentation may include forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including statements about the Company's vision, strategy, operations, growth, development and any other statements containing the words, "believes, " "expects, " "anticipates, " "plans, " "estimates, " and similar expressions. There are a number of factors that could cause Westmoreland Coal Company's actual results to differ materially from those indicated by such forward-looking statements including, but not limited to: general economic and business conditions; healthcare cost trends; the Company's ability to manage growth and significantly expanded operations; the ability of the Company to implement its business strategy; the Company's ability to pay the preferred stock dividends that are accumulated but unpaid; the Company's ability to retain key senior management; the Company's access to financing; the Company's ability to maintain compliance with debt covenant requirements; the Company's ability to successfully identify new business opportunities; the Company's ability to achieve anticipated cost savings and profitability targets; the Company's ability to utilize its tax net operating losses; demand for electricity; the effect of regulatory and legal proceedings; and other factors identified in the Company's most recent Annual Report on Form 10-K and subsequent reports filed with the SEC. The Company disclaims any intention or obligation to update any forward-looking statements as a result of developments occurring after the date such statement was first made.

Jan 1, 2008

By D. Harrington

At the time of mine accidents one frequently hears the expression "there will be accidents as long as there are mines", or it may be varied to state that the accident in question was unavoidable, or something similar indicating inability to prevent accidents. However, it is the opinion of the writer, after over twenty-one years experience in both coal and metal mining, seven years being spent wholly in safety work, that by far the greater number of all accidents is due to carelessness or negligence. This carelessness or negligence may be on part of the victim of the accident or of one of his companions, or on part of his employer or possibly even of the inspector or safety man, and in some cases all of these agencies are involved. It manifests itself in various guises, one of the most serious being violation of state mining laws or regulations or of mine rules, and frequently the rules of ordinary common-sense. The cause very frequently is that trait in human nature to "take a chance" and it has been the writer's observation that the worst offender is the old-time miner who has come safely through many years experience, who was mining when the "safety man was a baby", and who clings to old-time ideas and practices and has "no use" for "newfangled" present-day "notions". Unquestionably, there are accidents, wholly unavoidable and many are caused by ignorance and by the new-comer in mining, yet as previously indicated, the writer's observation is that the old-timer is by far the worst offender, bringing grief to himself, companions and employer. Of the numerous manifestations of carelessness and negligence in connection with mine accidents, which have come to the notice of the writer, only one will be treated in this paper, viz: Violation of State Mining Law, and mention will be made only of explosions and major accidents in coal' mines with which the writer came in personal contact as investigator. In most cases, in addition to mine inspection after the accident, the writer heard the evidence given at Coroner's inquest and thus was enabled to for¬mulate fairly definite impressions as to events and conditions leading up to the occurrence.

Jan 1, 1922

By Graham Bright

Up until a few years ago most of the electrical equipment used in the mines of this country was developed for industrial purposes and was adapted for use in mines by slight modifications. It became apparent, however, that mining conditions differed widely from most industrial applications and it became necessary to design and develop apparatus, particularly suited for use under mining conditions. Most of the electrical apparatus used in mines today, however, does not owe its success entirely to mining development, but in many cases developments in other branches have been taken and improved upon and modified to meet mining conditions. Power Plant: In the earlier days the power plant for the production of electric power usually consisted of fairly small belt driven direct current generators operated from reciprocating non-condensing steam engines. Today where possible the mines purchase power from central stations and where not possible it is ususally produced from turbine driven plants using non-condensing turbines for the smaller plants and condensing turbines for the larger plants. The bad water conditions at many of the coal mines in this country is, responsible in a large measure for the high cost of upkeep and repairs in isolated power plants. This feature with the type of labor available makes it difficult to operate an isolated plant condensing except in the larger mines where water conditions are good and the apparatus can be taken care of. The geared turbine is a particularly simple and rugged piece of apparatus and requires very little attention over long periods of time. Hoists: The first electric hoists to be installed used various types of motors designed for railway or industrial purposes, and the control furnished was far from satisfactory. Today most of the mine hoist motors are of the alternating current type, especially designed for hoisting service. The control for motors of 200 H. P. or over is usually of the magnetic of liquid rheostat type, and as built today will operate over fairly long periods with a very moderate cost of up-keep. Hoists of 1000 H. P. or larger are usually of the direct current type using field control and receiving power from a flywheel or synchronous M. G. set. Hoists of this type have made remarkable records in regard to continuity of operation and low cost of up-keep. Where high speed operation is desired in either coal or metal mines, the D. C. equipment using field control and a separate M. G. set to supply power to the hoist motor is not only the safest and most economical but in many cases is the only type of equipment capable of satisfactorily obtaining the output required. A number of improvements have been brought out with the field control scheme in connection with the acceleration, retardation, overfeed and overwind of the hoist. With these new developments the hoist operator can no longer abuse the hoist by improper manipulation of the control handle. Until a few years ago the matter of safety devices was not given much consideration when installing hoisting equipment. At the present time the safety devices are considered one of the most important items in connection

Jan 1, 1922

The fourth annual Mine Rescue Evaluation program was held in conjunction with the 1995 Institute convention at Crested Butte, Colorado. The Mine Rescue committee is chaired by Lynn Busskohl and is but one of 16 such committees of the institute. In 1995 seven teams participated in the program. They were BHP Minerals, The Coteau Properties Company, Decker Coal Co., The Falkirk Mining Company, Kerr-McGee Coal Corporation, Sabine Mining Co. and Western Energy Co. [ ] Professional evaluators who provided challenging scenarios for the near 60 persons were Jack Knight of Pensacola, Florida; Dave Medick of Northwestern Resources, Jewett, Texas; Joe Nugent of Idaho Springs, Colorado and Jack Peleaux of Innovative Access, Evergreen, Colorado. Each team was comprised of seven members and one trainer representing the states of Montana, New Mexico, North Dakota, Texas and Wyoming. This committee challenges the incoming Colorado vice president to locate a team for the 1996 program in Durango, Colorado. Five different scenarios were presented the first day of evaluation and three the second. Each team was given the pertinent information to solve the problem as they assembled at the site. The realistic industrial related scenarios closely simulated the stress of actual rescue incidents and were going on simultaneously. Each team was unaware of the circumstances until arriving on the scene. Lynn Busskohl presented an overview of the Mine Rescue committee work at the Monday Institute welcome session and invited all attendees outside to view the various pretend rescue operations. Valuable suggestions were made by the team of evaluators following each scenario. These teams are providers of immediate rescue and medical care for accident victims at their respective properties. The members are prepared to act with immediate and professional knowledge to save lives and prevent further injuries. [ ] Many donors financially assisted with the 1995 program. They are: Blattner Constructors; Butler Machinery Co.; CMC Rescue, Inc.; Galls, Inc.; General Equipment; PMI-Petzel Distribution, Inc.; SafetyMaster; Skedco and TIC of Wyoming. An adder to the 1995 convention was golfing on Saturday, June 24 for three foursomes. This may become an annual event if there is sufficient interest. Team meetings, tests and swap meetings were attended by all participants during the Friday thru Monday program. A fun competition took place after lunch Monday followed by a training session. All events were chaired by Lynn Busskohl. On Saturday evening, June 24 a reception for all mine rescue participants and spouses who had advance registered for the social event. The RMCMI Board of Directors was invited to attend and meet with the teams. As convention attendees, all mine rescue committee members attended the Monday night country western reception and Bar-B-Q with their families. This was followed by an adult western dance evening. The Mine Rescue committee looks forward to a 1996 return to Tamarron near Durango, Colorado which was the site of the first evaluation program. Plans call for all convention housing to be at Tamarron.

Jan 1, 1995