Search Documents

The reasons for including treatment of water in Whites and Intermediate open cuts in the overall rehabilitation strategy are given in the introduction. The target quality of the treated water also is discussed. Equipment selections are reviewed and reasons given as to why certain choices were made. The differences between this plant and an ore dressing mill are highlighted. An outline of the operating procedure is included along with a basic flowsheet. Cost estimates are briefly Discussed.

Jan 1, 1984

Concrete has been used for many years in block caving, principally for drift and drawpoint linings. This paper describes the requirements for concrete in this application, the required properties, the mix design, and transportation and placement systems. In addition a concrete mix design rationale is also proposed.

Jan 1, 2000

A brief introduction is given of the scale and of some special features of South African gold mining; it is noted that great depth of mining and narrowness of the reefs, and hardness and abrasiveness of the rock are the main sources of the problems of the industry. The most inhibiting problems are: Excessive rock pressure occcurring in conjunction with rockbursts, hot and humid working places due to high virgin rock temperature and auto-compression of the air, and low level of productivity. Conventional solutions applied ordinarily in mining do not promise to eliminate, or even alleviate, these difficulties.

Jan 1, 1985

Indonesia remains relatively unexplored by modern methods. The great expectations created by the rush of companies taking up Contracts of Work over large areas during the epithermal gold/ring-of-fire boom (1985-7) have not been fulfilled. This is not necessarily a reflection on the prospectivity of Indonesia; on the contrary, many of the hopeful companies were,, under-staffed and under-financed to overcome the physical and logistic problems of exploring virgin jungle.After the stock market crash of 19th October, 1987, many of the weaker companies were unable to sustain their programs or to arrange farm-outs, and they have subsequently relinquished their tenements. In some cases, little or no field work has been carried out so that many areas remain untested. This poor performance will ensure much more rigorous scrutiny of future applications by the Indonesian authorities.

Jan 1, 1990

By Miskelly N

The Joint Committee of The Australasian Institute of Mining and Metallurgy (AusIMM) and the Australian Mining Industry Council (AMIC) have published a Code for the Reporting of Identified Mineral Resources and Ore Reserves. The Code is the result of an initiative begunin 1971 to achieve industry self regulation of Resources and Ore Reserves reporting which resulted first in guidelines for reporting standards but which have now been incorporated in ASX Listing Rules as a Code withsignificant sanctions ensuring compliance. This paper describes the background to the Code, its key provisions, and comments on practical aspects of1 working with the Code and compliance issues.

Jan 1, 1990

This paper outlines a range of strategies for steady state optimisation of most types of concentrators. Optimisation is considered in terms of comminution performance, energy efficiency, concentrator strategy and overall mine/concentrator operating philosophies. Application becomes more complex as the range of optimisation is expanded. However, the potential gains also increase. A step by step framework for data collection and analysis is provided. This process is facilitated by powerful simulation and mass balancing programs which are now in common use. Once a sound, steady state rationale for optimisation has been developed, it may be used to provide a fine foundation for process control system development.

Jan 1, 1993

By J Morton

There are many avenues for potential liability facing the Mining Industry today. Liability for breaches of environmental statutes such as the Resource Management Act 1991 and the Hazardous Substances and New Organisms Act 1997 include not only financial penalties but imprisonment and perhaps even more significantly will affect the reputation of the Industry. The potential for liability is not restricted to the employees that cause the actÆs to which liability attaches, but also potentially affects all the levels of management and even the company itself. There is also potential for liability through common law actions which can be utilised in cases of environmental harm. These should not be ignored by the Mining Industry. The Mining Industry must take a proactive approach to minimise exposure to potential environmental liability. This can be achieved by undertaking comprehensive environmental management initiatives and policies.

Jan 1, 2005

The papers to be presented in this Session show an interesting range of subject matter. Three discuss specific problems associated with existing mines, one deals with hydrogeological risk evaluation and one uses the impact of mine drainage on an aquifer to analyse a large-scale hydraulic parameter. Paper 1. Environment studies to determine the impacts of re-opening Banska Stiavnica-Hodrusa ore district in Czechoslovakia - Dusan Cababla - Marian Skaviniak. Future developments in established mining areas may have significant hydrogeological implications, especially where the existing mines are to be deepened. In turn this may have an impact in the area of the disposal of ever larger quantities of mine water, particularly, as is often the case, where the quality of this water is poor.

Jan 1, 1988

The optimisation of human resources provides the path to improving productivity. British Coal has the goal of competitiveness with a quality product in ensured supply. High class skilled professional management teams will analyse job definition and selection procedures for posts, as well as objectives for and delivery of effective management training.Some fundamental changes in attitudes towards training as a means of achievement may be by managers at all levels self-examining their abilities to improve their styles, and by moving training more into the world of high technology techniques. The resulting improvements to management and training with attendant cost benefits will be enjoyed by the companies responding most effectively to these challenges.

Jan 1, 1991

By Roden S

This paper illustrates that sampling problems and difficulties are as common in an R&D environment as they are in an operating plant. Researchers need to be aware of the potential influence of poor sampling practices and when feasible determine the sampling and analytical precision at the start of any experimentation. Specific problems that have been encountered are discussed and the procedures implemented to overcome these difficulties are described. Examples from projects include the cyanidation of a Au/Ag ore, column leaching of refractory gold and oxide ores, the bioremediation of contaminated sites and the flotation of ore containing native copper.

Jan 1, 1976

By Oboso A, Nakahiro Y, Takenaka Y, Wakamatsu T

As part of the fundamental studies on the recovery of Au by solvent extraction, the synergism of combined extractants on the extraction of An from the sulphuric acid solution containing thiourea was investigated. Extractants tested were di-(2-ethylhexyl)phosphoric acid (D2EHPA), tri-n-octylamine (TOA), tri-n-butyl phosphate (TBP), and trioctyl phosphine oxide (TOPO). Four kinds of extractant combinations, D2EHPA/TBP, D2EHPA/TOPO, TOA/I'BP, and TOAITOPO, were tested to clarify the synergism on the extraction of Au in terms of various concentration ratios, diluents, the concentration of sulphuric acid, and the concentration of thiourea.

Jan 1, 1993

By Brown D. N, Troth D. A

Large blast furnaces demand high standards of preparation of feed materials which must meet tight specifications of chemical and physical quality. Measurement of these factors must be expeditious but the nature of the coke, sinter, ores and fluxes and the large tonnages involved requires substantial mechanical sampling plant. The equipment, its operations, and its problems, associated with the 5000 t.p.d. No.5 blast furnace at Australian Iron and Steel Pty. Ltd., Port Kembla, are described and the efficacy of chemical blending achieved in the ore blending yards and sintering operation, is reported.

Jan 1, 1976

During the past seven years silver recovery has been increased from 9 per cent to over 61 per cent. The changes in plant practiee which have led to this increase are described. Gold room clean-up procedure has been varied, so that half the additional silver is obtained as pure silver chloride, which.is converted to silver bullion for marketing.

Jan 1, 1964

The role and policies of the Aboriginal Sacred Sites Protection Authority are described in conjunction with the provisions of the N.T Aboriginal Sacred Sites Act 1978. Comment is made on the application of the legislation and these policies to development proposals in the Northern Territory. A brief review of criticisms by both developers and Land Councils is provided together with responses to these Criticisms.

Jan 1, 1984

Traditionally mill operators have been employed with varying educational backgrounds with little if any formal training in aspects of mineral processing. Pasminco Mining-Rosebery, in line with other organisations, saw the need for a prerequisite entry level for operators to enter the industry. After initial discussions between various West Coast Mines personnel, union and government representatives, an industry working group was formed in 1989 with the aim of developing a traineeship suitable for the mineral processing industry. Training and technical representatives from four of the West Coast Mines and TAFE were commissioned with the curriculum development. The resultant course, which is recognised under the Australian Traineeship system, involved an integrated on and off-the-job training program, including 13 weeks of formal off-the-job instruction.

Jan 1, 1991

A three-dimensional finite element analysis is used to determine the stress intensity factors associated with the chevron-notched semi-circular bend test specimen. The stress intensity factor calibration is done over a range of crack lengths a

Jan 1, 1998

By Moxon NT

The detonation pressure of ANFO can be significantly reduced by the addition of low density materials such as polystyrene, bagasse, sawdust or perlite. Laboratory and field test results have shown that homogene- ous mixtures of these low density explosives can be produced in a bowl truck and loaded into a blast hole without segregation. The detonation pressure of the mixture can be tailored to suit the material to be blasted by varying the quantity of low density additive incorporated into the mix- ture. Results obtained in the field indicate that these low density explo- sives can lead to significant cost savings without compromising fragmentation or production.

Jan 1, 1988

In the late-1990s, and into the 2000s, many industries, including the mining industry, have seen significant transaction activity by way of acquisitions, floats, joint ventures and major capital projects. The fundamental financial trends are two-fold. First and foremost, a high level of transaction activity within the industry and secondly, the recently introduced requirement for corporate governance standards, have placed increasing pressure on the directors of mining companies. This paper will deal with specifically corporate governance implications of any large capital investment transaction and the associated impact on the mining industry. To provide the framework for this paper, I have looked at a number of recent transactions as well as corporate governance recommendations from the ASX and the HIH Royal Commission.

Jan 1, 2003

Using a new type of laser surveying instrument named Particle Dynamics Analyser (PDA), the distributions of the radial and axial components of the mean velocity, the size and the concentration of solid particles at selected positions within a transparent hydrocyclone were directly measured out for the first time, from which profiles of the flow field of solid particles were obtained. And some new points were put forward such as the locus of zero vertical velocity (LZVV) of solid particles was not the same as that of liquid, and some particles in inner helical flow could also be separated. The results are of great significance to farther ascertain the separation principle of hydrocyclones and improve the separation efficiency.

Jan 1, 1993

Australia has a long and successful record in mineral processing technology extending over 100 years. This has included the development of new processes and equipment and new analytical techniques. These developments have added greatly to the efficiency of mineral processing and thereby to Australia's national wealth. Demands on mineral processing engineers in the future show no signs of diminishing, in fact they will increase considerably as more difficult areas must be treated and the requirements for quality control become more stringent. These demands must be met successfully since mineral processing must continue to be one of the most important technologies in Australia's economic future.

Jan 1, 1989