Search Documents

At the meeting of the American Institute of Mining and Metallurgical Engineers, G. S. Rice, Chief Mining Engineer of the U. S. Bureau of Mines, announced the definition of a gassy mine. This definition has been awaited with much interest, especially by the Safety Committee of the Rocky Mountain Coal Mining Institute. It applies to the whole area of all mines, any part of which is on the public domain of the United States. Consequently it will be of wide application in the western part of this country. The safety committee of the R. M. C. M. I. has been hopeful that the Institute would adopt this definition without exception as the codes of rules to be recommended at all mines in the Rocky Mountain area. The statement follows: "The U. S. Bureau of Mines believes that all coal mines are potentially gassy; but for purposes of administration in respect to prevention of explosions and fires, the Bureau recommends the following classification: "Class 1 coal mine-A practically non-gassy mine in which flammable gas in excess of 0.05 per cent cannot be found by systematic search. "Class 2. coal mine-A slightly gassy mine in which (a) flammable gas has been found, ? but in quantity less than two per cent in still air in any active or unsealed-abandoned workings; or (b) flammable gas can be found, but in quantity less than four per cent, in some place from which the ventilating current has been shut off for a period of one hour; or (c) flammable gas can be found,* but in quantity less than one-fourth per cent in a split** of the ventilating current; or (d) flamamble gas is found in quantity greater than' specified rate*** of not more than 25 cu. ft. per minute. "Class 3 coal mine- A gassy mine in which flammable gas is found in quantity greater than specified for a Class 22 coal mine. GENERAL NOTES REGARDING DECISION NO. 3 "(A) Flammable gas found in coal mines is, with rare exceptions, methane. In coal-mining fields where natural gas is found in lower geologic horizons by deep wells which pass through or nearby the coal mines, there have been rare instances of la leakage from the well. Natural gas is chiefly methane; that constituent almost always forms more than 85 per cent of the whole, but it usually contains ethane, propane and traces of butane also. Therefore if the latter gases are found in mine air it is an indication of leakage. The lower limit of explosibility of methane-air mixture when there is turbulence of five per cent and of natural-gas-air mixtures with about ten per cent ethane and associated hydro-carbon gases is 4.6 per cent. The limit therefore varies with the character of the mixture. " (B) To determine the proper classification of a coal mine, it is advisable that systematic testing and sampling be done at least three times in a period of not less than 72 hours. All tests and samples of the mine air, except one, must show an inflammable-gas content less than the maximum limit of the class to which the mine is assigned. In other words, a tolerance of one test or analysis may be permitted to provide for a mistake or a very exceptional occurrence. "(C) When a new mine is being opened in a coal field where existing mines are generally gassy, it is common sense to assume that similar conditions will be found in the new mine, and its development and equipment should be based upon the expectation that it will be assigned to Class 3."

Jan 1, 1926

The second annual RMCMI Mine Rescue Performance Evaluation was held in conjunction with the 1993 RMCMI Convention at Beaver Creek. [ ] Six teams participated in this year's evaluation; BHP Minerals, Navajo Mine, Fruitland. NM; BHP Minerals - LaPlata Mine. LaPlata, NM; BHP Minerals - San Juan Mine. Waterflow. NM; The Coteau Properties Company - Freedom Mine, Beulah. ND; Cordero Mining Company, Gillette, WY; and The Falkirk Mining Company - Falkirk Mine. Underwood, ND. The Western Energy Company of Colstrip, MT was represented through observers and evaluators. [ ] Realistic industrial related scenarios, closely simulating the stress of actual rescue incidents, were provided by members of the Eagle Valley Ambulance Service. Five different scenarios were presented to each team on the first day of the evaluation and three on the second. Each team was given the pertinent information to solve the problem as they assembled at the scenario site. The scenarios were going on simultaneously and each team was unaware of the circumstances until they entered the scene. Interested onlookers were afforded the opportunity of viewing the actual simulated rescue operations as they occurred. The teams received valuable pointers and direction from the ream of evaluators following each scenario. They were are also given the opportunity to observe the other teams in action and to meet with the members of all the teams to share information and ideas during team meetings per the predetermined schedule. The primary goal is to recognize current rescue skills, knowledge, and abilities of participating teams. In doing this, each team was provided with individual evaluations and a path for improvement as needed. Each team was recognized for their efforts at an awards breakfast on the final day of the evaluation. New innovations in rescue equipment were introduced and demonstrated for interested teams following the awards program. The importance of progressive training such as what we are witnessing at evaluations during the RMCMI conventions cannot be stressed strongly enough. These teams are the providers of immediate rescue and medical care for victims of accidents at their respective properties. Every mining operation has the potential for very serious accidents due to immense size of equipment and mining logistics. These rescue teams must be prepared to act with the most immediate, professional and knowledgeable actions to save lives and prevent further injuries. Safety is a primary concern of every mining operation and the mine site rescue team is an integral part of that safety effort. The evaluation program is very appreciative for the financial support of the following businesses to enable this program to continue: Safety Master, Acme Welding, North American Coal, Triune. Cummins, OK Tire. Modern Industrial, The Industrial Company, Mine Safety Appliances (MSA), Biomarine, Personal Safety Enterprises, Inc., and Blattner Construction, Thank you again for your much needed assistance. Plan to be a part of next year's Mine Rescue Evaluation Program as a participant or an observer. You will be amazed at the skill levels of the Rescue Teams. See you next year! Linda G. Ash The falkirk Mining Company [ ]

Jan 1, 1993

By S. R. DeBoer

A study of Western cities reveals the fact that a city where people make their homes for permanent residence is always a city with, well-shaded avenues, with parks and playgrounds; in other words, a beautiful city. On the other hand, the average city that lacks these qualifications is usually a city of transient population. Many of our Western cities must be classified as such. Their inhabitants live in such a city only to the time that they will be able financially to retire from business and go to one of the other types of cities to live; or until opportunity offers itself for a position or a job in such a city. I believe that our Western coal camps could benefit by this truth. If conditions can be created in the camps that will encourage the workers to settle permanently or for a long time at least in the town, it would greatly aid in stabilizing employment. By the term "workers" I do not mean the pick and shovel men alone, but everybody from the superintendent or the manager down; for the educated part of the population suffers probably greater from a desire for better surroundings than the less educated part. Modern City Planning tries to show the way for more attractive towns; for more practical towns also, and at less expense. The grid-iron system of street planning is slowly being replaced by one that fits the contours of the site. Instead of streets that are cut through the hills and built over the valleys to get practical grades, it tries to show how these streets can be made to fit the ground and produce better traffic lines; greatly more attractive streets; better building sites and lots, and all of this at less expense. A well-planned town of this character should have as its nucleus, a central square around which the main stores and business houses are grouped. The main building of this group should be the church, the community meeting place, city hall or such other buildings of a public or semi-public character, that are imposing enough to add interest to the square. From this central square, streets should be built to radiate out in all directions, more or less like a spider-web. The main lines of these streets should be reserved for traffic purposes and they should be wide, for the town may grow into a city, and they should be direct, connecting the town center with outlying points at the shortest and easiest possible line. Between these radiating streets should be residential streets of narrower width and arranged in such a way that fast through traffic cannot pass over them and make them unsafe and unsanitary for family life. Following up the comparison with the spider-web, the town should have circular streets, encircling the whole town with rings at various distances out, along which circular lines parks should be located. In the West, where the need for shade is so great, the town should surround itself with a belt of forest trees. Such a forest belt would break the winds and shelter the town, and also make the whole town a cozier, nicer place to build a home in. A forest belt of this kind does not necessarily mean a great layout of money. Trees can be planted small and at little cost and a carefully studied irrigation system will make the maintenance cost small. If the town has any places of natural beauty they should be carefully preserved and made accessible. Natural parks of this type will often take the place of the artificial parks of large cities, and at no expense to the community. Playgrounds, a swimming pool, either of concrete or a sanded beach on a lake; a place for all to go skating in winter; a hill for sledding in

Jan 1, 1924

By C. P. Crawford

Bureau of Mines Technical Paper 172, by S. H. Katz and H. C. Porter, entitled "Effects of Moisture on the Spontaneous Heating of Stored Coal", says at the outset, "Spontaneous fires in storage piles of bituminous coal' have been the source of trouble and loss since the industrial utilization of coal began. In Europe the idea arose that spontaneous combustion is more liable to happen during wet weather than during dry. Statements favoring or opposing this idea have crept into the literature. Conflicting conclusions, based on experiment as well as opinions based on observations of various degrees of reliability, are given in most of the recorded discussions of the subject. "Because of the uncertainty of the effect of moisture and its seeming importance among the conditions that affect spontaneous combustion in stored coal, the work described in this paper was undertaken by the Bureau of Mines. The experiments showed that a coal from Illinois oxidized faster when dry, whereas a sample of Pittsburgh coal oxidized faster when moist. These discordant results and similarly inconsistent results from the observations of different investigators may be coupled with the fact that under actual conditions of, storing, both coal and air always contain a considerable amount of moisture." The foregoing report of the investigations of the Bureau demonstrates that the mystery of spontaneous combustion has not yet been solved. This fact adds to the fascination of the subject. I became interested in the matter about ten years ago in observing what was probably one of the best exhibitions of this phenomenon. The old dump at Castle Gate No. 1 Mine contained boney coal and track cleanings generally. In winter when snow fell upon this old dump, the snow was soon melted by the heat of the dump which was comparatively warm at all times. Within 48 hours afterward little blue flames were in evidence on the surface of the pile. Few of the gas feeders were sufficiently constant to maintain a steady flame at any given point, but shifting emissions of gas were ignited one by another, resulting in a continuous popping and apparent running about of the flames. Another interesting exhibition of spontaneous heating was to be seen a few years ago in the storage coal piles of the local sugar factories. This coal was piled in concrete lined pits and the latter were filled with water. However, or this occasion the coal extended above the surface of the water. At every plant where this condition existed the coal was affected heating, and in each case the affected area was in a plane horizontal to and from 8 to 1.4 inches above the water level. The height of the hot area above the surface of the water appeared to be affected by the fineness of the coal. It is well known that oily rags have a tendency to heat when allowed to accumulate in some location protected from free air circulation. For some reason, as yet unknown, this does not apply to petroleum or its derivatives. Now, the most common explanation of spontaneous combustion is that the combustible material oxidizes by being brought into contact with air in the presence of moisture, the theory being that the moisture acts as a catalytic agent. My theory is that spontaneous combustion is due to oxidation of combustible matter by free oxygen carried in solution by a liquid, the oxidation taking place only as, when, and at the place where this oxygen is released from solution by the evaporation of the liquid. Also, this oxidation takes place to some degree regardless of the condition of the combustible-whether it be lump coal, coal dust, straw, wheat flour, coke, or any other combustible but, as the speed of oxidation is directly influenced by temperature, it follows that spontaneous combustion only becomes noticeable or serious in cases where the resulting heat' cannot escape as fast as it is generated.

Jan 1, 1925

By Franklin P. Wood

Unnumbered ages have passed since the time when nature's laboratories were working without the aid of capital or labor unions assisted only by earth's cooling crust and old Sol's rays, to lay the prodigious coal beds of the earth and distil the oils which now furnish the basis for the world's great industries. Strangely enough rays from the same old sun probably somewhat diminished in intensity are still drawing from earth to clouds the water that will run down hill and through man-made devices produce energy to compete with that made with the products created in ages past. So now we find that within the past century vast human industries have grown up around the products of these agencies and here we are today discussing the many problems connected therewith and among the others the subject of this paper, which is essentially the relation of COAL to OIL in industry. The problems involved are those of human relationship and are not fundamentally unsolvable when engineering skill and knowledge is properly applied. The last few years has developed a brand of pessimism that is especially prevalent in the coal industry, at any rate in the west where we come in contact with it. In any general discussion with coal men, a very short time only is required to bring out the feeling or expression that the coal business is on the rocks and the reasons run the gamut of human deviltry. We have heard that in the not far distant past corn was so cheap that the farmers were compelled to burn it and thus deprive the coal mines of their well earned right to sell coal for this purpose. We have heard that the flood of oil is so vast that it was being burned in preference to coal, and to heap insult on injury that the rail- road locomotives were burning oil in order to pull coal away from the mines. We have heard that the union was responsible for all the woes to which the industry is subjected. We have heard that the family tin lizzie is so depleting the family exchequer that coal could not be purchased and if purchased could not be collected for. We have heard that producing mines are so numerous that the profits are a negligible quantity. These are but a few of the reasons assigned for making the coal producers a class of pessimists which is not good for the industry. All these reasons given and all the others must be taken collectively and these are not the cause but the effect of a rapidly changing civilization. An analogy may be found in the experience of many of us in the electric industry a few years ago. You may remember that less than 20 years ago the high efficiency Tungsten electric globe was introduced. It was so much more efficient than the old carbon lamp that only one-third of the current previously required was needed to produce the same illumination. Consternation seized the ranks of electrical men who had little or no vision, for the out- look was that so little current would be sold that everyone would be bankrupt. This limited vision, however, did not prevail, for all engaged in the industry spurred on by necessity, accomplished many of the things that we are now enjoying the fruits of be- cause the electric industry has grown and is growing by leaps and bounds and every highly efficient improvement is greeted with rejoicing. It is well known that when the old type of carbon arc lamp began to be replaced by modern units the manufacturer of carbon rods thought his doom was sealed and yet these same manufacturers have so adjusted them- selves to conditions that the dry battery business of today is of vastly greater volume and profit than was the carbon rod business of the past. Of course, there are industries that should not have survived anyway that have gone down and out to makeway for vastly improved conditions and can

Jan 1, 1925

By F. A. Young

A description of the dry process coal cleaning plant which has been built and operated by St. Louis, Rocky Mountain & Pacific Company at their mine at Brilliant, New Mexico, should at first be a description of the special machinery which is used in this process. This equipment consists primarily of screens for sizing the coal into six different sizes all smaller than 1 ½ inch and the pneumatic machines for cleaning each size. These machines are patented and were manufactured by Sutton, Steele & Steele of Dallas, Texas, until a few months ago when all rights of sale were acquired by the American Coal Cleaning Corporation. These screens, a plan of which is now before you, are called anti-gravity screens because the coal travels up hill. The screens which we have at Brilliant are 3 feet wide and 7 feet 4 inches long. They consist of one upper deck which slopes upward in the direction of the flow of the coal, at an angle of 12 degrees. This deck is a wire mesh screen the size of which determines the size of oversize from that screen. Under this is a lower deck with a slope of 7 degrees. This is a solid bottom and is for advancing the undersize to the next screen. On account of the difference in pitch of these decks they are about 11 inches apart at the discharge end, which allows the oversize to be taken off at one or both sides and the undersize to fall only a few inches on to the following screen. This is perhaps the most valuable point in this patent as it allows any number of screens to be placed on a-level floor, tandem in a battery without elevating or rehandling the coal in any way. The length of the screens corresponds to the proper spacing of the cleaning tables which naturally operate on the floor below. I know of no other screen which can be operated in this way. The coal is caused to travel by a reciprocating motion. A shaft as shown near the center of the screen box and under it has an eccentric at each side of the screen with connecting rods attached near the rear of the screen box. The screen box is attached to the stationary under frame by means of cast iron plates extending full width across the screen box. These are placed at an angle as shown so that the forward motion of the eccentrics causes the screen box to rise as it moves forward and the backward motion drops the screen from under the coal thereby causing it to advance. The coal advancing over the screen cloth in this rolling or jumping motion causes very perfect sizing. It should be stated here that very accurate sizing is necessary for the success of the cleaning tables. The stroke is 1 inch and the speed 350 revolutions per minute. In describing the pneumatic cleaning table, I place before you a plan furnished by the makers. The basic principle is that if a film of coal one to two inches thick and all of nearly the same size pieces is placed on a flat perforated surface and a large volume of air passed through it, the lighter particles which are the clean coal will soon find their way to the top of the film, while the heavier particles, or waste, will remain on the bottom. The machine is built with a perforated deck about 4 feet square under which is an air chamber and air duct connecting with a fan which is part of the machine. The deck of the table has a reciprocating motion the same as the screens already described, which tends to advance the product up a slight slope which is adjustable. The coal is fed at one corner of the table as shown and the deck slopes also away from the feed and at right angles to the reciprocating motion. On top of the perforated deck are riffles about 2 inches apart and running parallel to the line of reciprocating motion. These riffles are about 1/2 inch high at the fan and feed side of the table and taper to nothing at the far side. When the coal is fed on to the table, the air through the perforations tends to raise it 'and roll it over these riffles down the slope toward the clean coal discharge. The heavier particles do not get over the riffles so rapidly and the reciprocating motion is constantly pushing them

Jan 1, 1923

Jan 1, 1953

By Wm. Monay

MR. MONAY (Vice President Kinney Coal Co., Scofield, Utah): The past year and a half has witnessed a series of coal mine disasters in Utah and Wyoming, concentrated into the short space of a few months, following a long period of years in which the industry was comparatively free from devastating calamities. The natural result has been a hysterical activity on the part of bureaus, commissions and professional reformers who know little about coal mining from a practical standpoint. This activity has been met by the industry in Utah with an attitude of submission, no doubt the result of the fear of being misunderstood by the public. But it is my firm conviction that the lives and property of the coal industry will find their surest guaranty of protection in the humanity, and in the self interest of those operating and working in the mines, rather than in governmental regulation. Inelastic, inflexible blanket statutes and rules will simply stifle and hamper the initiative and progress of our industry in working out its own salvation, under the varying and changing conditions of different localities, different conditions, and in different mines. We who have spent our lives in digging in the mines and operating them, know more about this business than anyone else and I believe it is time for us to speak up and no longer sit meekly by while inexperienced bureaus and unskilled commissions make up laws, rules and regulations for us which when made are on the books to stay, even though in a short time they may prove inapplicable, in whole or in part, or be superseded by something different, and which in some cases create new dangers or lull us into a false sense of security. Shortly after the Castle Gate explosion in March, 1924, a new set of safety rules was issued by the Indus- trial Commission of the State of Utah to become effective July 1st of the same year, the most important of which prohibits the use of black powder in any mine--gaseous or non-gaseous; prohibits the use of open flame lamps in any mine-gaseous or non-gaseous; and requires that rock dusting in all main haulage ways as far as the freezing point and required that all mining machines be equipped with water to be applied while cutting. These rules have been characterized as "Utah's Monument to her Dead Miners" in a large poster spread broadcast over the country from an office in New York that styles itself the Association for Labor Legislation. In reviewing the coal mining history of the State of Utah, in the year 1900, a serious disaster occurred at Winter Quarters. The cause of the same is believed to be an explosion of powder that was stored in the mine, which was a common practice in the early days, and from that time until the Castle Gate disaster, March 8, 1924, a period of some twenty-four years, no explosion of any kind occurred in this district. During all this period open lamps were used, considerable black powder was used, rock dusting was unheard of, sprinkling with water was very generally done-all without any catastrophe. Since the adoption of the new rules, we have 'had a very violent explosion at the Carbon Fuel mine in Spring Canyon. At the time of this explosion, 3,000 feet of the main slope had been rock dusted several times between July 1st and September 21st. The second left entry, which is a main haulage way, a distance of 3,000 feet was completely rock dusted on the date of the explosion. This mine is not considered extremely gaseous, yet an explosion as violent as that of the Castle Gate mine occurred. Some thirty men who had been loading coal in various parts of the mine on this Sun- day, the day of the explosion, and other men employed in rock dusting the second left entry, had just left the mine a little while before it occurred, and no abnormal condition in the mine was noted. At the time of the explosion five machine men were in the mine.

Jan 1, 1925

Jan 1, 1986

RMCMl PRESIDENT CHARLES W. MARGOLF on behalf of The RMCMI Board of Directors and Officers invites you and your family to attend The 81st Regular Meeting and Convention of The Rocky Mountain Coal Mining Institute to be held at Tamarron, Durango, Colorado JUNE 30, JULY 1 AND 2, 1985

Jan 1, 1984

The Role of Partnerships ?Industry history ?Companies were their own kingdoms ?MSHA and NIOSH were out of touch and focused on enforcement with no direction ?Labor and management were constantly at odds with each other

Jan 1, 2002

[Proceedings VOL. II. PART VI. CONTENTS PAGE A Few of the Adverse Conditions Encountered in Mining Coal in the Utah Fields, by J. B. Forrester ..185 Growth of the Electric Power System of the Union Pacific Coal Company at Rock Springs, Wyoming, by D. C. McKeehan ?.. 193 Screening and Preparing Coal at the Tipple, by Benedict Shubart ?.199 Coal Mine Accounting, by E. R. Gibson List of Members ?.211]

Jan 1, 1921

Jan 1, 1987

[ ] RMCMI PRESIDENT 1985 - 1986 ARTHUR K. NEILL on behalf of The RMCMI Board of Directors and Officers invites you and your family to attend The 82nd Regular Meeting and Convention of The Rocky Mountain Coal Mining Institute to be held JUNE 29, 30 AND JULY 1, 1986 Kalispell, Montana

Jan 1, 1985

Albert M. Keenan, President, Thompson Creek Coal and Coke Corporation, Denver, Colorado, opened the third session of the Fifty-ninth Regular Meeting of the Rocky Mountain Coal Mining Institute at 9:30 a.m., and introduced the first speaker of the morning. Raphael J. Moses, Attorney, Colorado Water Conservation Board, Boulder, Colorado, spoke on "The Opportunity for Coal in Colorado River Basin Development." (For the printed text of Mr. Moses' paper see index.) Stephen F. Dunn, President, National Coal Association, Washington, D. C., was introduced by Mr. Keenan, and he addressed the Institute concerning "Coal and the Washington Scene."

Jan 1, 1963

[Proceedings VOL. II. PART V. CONTENTS PAGE Mine Haulage, by R. A. McAllister-----------------145 Efficiency in Shot Firing, by Robert A. Marshall -- 149 Some Facts About Coal Mining, by Sam Andrews -153 Flexoid Tubing and Its Application to Coal Mines As a Means of Temporary Ventilation, by George A. Brown -161 Longwall Coal Mining, by Thomas Collier ------ 163 Advantages of Having Such Men as Fire Bosses Under State Rather Than Corporation Jurisdiction, by R. S. Morton ---- 165 Longwall Mining, by Parley Potter -------169 DeWatering of the Rouse Mine, by D. A. Stout ---175]

Jan 1, 1921

[ACZ, Inc. Boliden-Allis CINCO (Coal Industry Consultants, Inc.) Coal Colowyo Coal Company Commercial Testing & Engineering Co. Crane & Hoist Sales, Inc. Cummins Power, Inc. Cummins Southwest, Inc. Cyprus Coal Company Energy Fuels Corporation Ford, Bacon & Davis Utah, Inc. T.J. Gundlach Machine Company Harnischfeger Corporation Hemscheidt Corp. GH Hensley Industries Honnen Equipment Company Jennmar Corporation Joy Technologies, Inc. K&P Sales Engineers, Inc. Kennametal, Inc. Kerr McGee Coal Corporation Neil F. Lampson, Inc. McLanahan Corporation National Mine Service Company NERCO Coal Corporation North American Coal Corporation Peabody Coal Company Pittsburg & Midway Coal Mining Co. Ramsey Technology, Inc. Roberts & Schaefer Company Rocky Mountain Machinery Company Santa Fe Pacific Coal Corporation Scandura, Inc. Sheraton Steamboat Southern Pacific Utah Power & Light Company Western Energy Company]

Jan 1, 1989

[ ]

Jan 1, 2001

[ ]

Jan 1, 1997

Jan 1, 1983