Search Documents

By Joseph Harrington

It is sufficiently correct to say that domestic solid fuel is universally hand fired and it is almost as correct to state that a very large proportion of hand-fired domestic fires are extremely inefficient and smoky. This is particularly true with raw bituminous coal for the fuel. The smokeless and efficient firing of domestic coal affords one of the most difficult problems confronting the combustion engineer. This is due to the universally constricted combustion space in the domestic furnace, the complete ignorance regarding the laws of combustion on the part of the average person, and the fact that the laws of efficient combustion are almost completely nullified under these conditions. It is well to familiarize ones self with these laws. These are: 1. The gradual introduction of the fuel to the furnace. 2. The admission and mixing of the right quantity of air with the coal gases. 3. A temperature high enough to permit complete combustion, and 4. A furnace space of volume sufficient to permit of the combustion gases and the oxygen getting together within the confines of the furnace. Even a casual inspection of the domestic heater will show that none of these essential things are present in proper degree, and this is the reason why the problem of domestic firing presents such difficulties. I have analyzed these conditions in a paper published by the Black Diamond, and which has already had wide distribution, so that I will not repeat the rather lengthy discussion in this paper. A survey of the entire field indicates very clearly that a reversal of existing methods and equipment must be had before any real improvement can be expected. It is my firm belief that in this instance above all others it is necessary to build the efficiency and smokelessness into the equipment in such a manner that its performance will be entirely independent of both skill and interest on the part of the operative. To attempt to educate every man, woman and child who periodically throws coal into a domestic furnace would be literally impossible. Much can be done, however, if we could teach the householder the simple essentials of alternate firing, which I have explained at length in the above mentioned paper. This would go a long way toward making the domestic furnace problem more satisfactory, as well as efficient and smokeless. Many will argue, and with good reason, that the domestic fuel should be prepared coke and with this I agree up to the limit imposed by the practical considerations of quantity production, price and the possibility of marketing the by-products. It will be obvious that if enough raw coal should be processed to provide all of the required domestic fuel that the amount of by-products recovered during the coking process would be so great that there would be little or no market at any price which would justify the manufacture of coke. If the by-products were wasted they would not only be a tremendous economic loss, but the price charged for the coke would probably be so high that the market would be limited, and this would defeat the very idea of the whole thing. Much can be done, however, in advancing the use of coke, but I believe that much more extensive and careful experimentization should be had in order to determine the right size and quality of coke for the various domestic furnaces. If coke were to be developed for extensive domestic consumption it is more than probable that the coking process should and could be stopped at a point where the volatile content of the coke would be sufficiently high to permit of prompt ignition and combustion in low draft installations. If the volatile content were from five to ten per cent a very different kind of coke would be produced from that which is now produced with perhaps one per cent of volatile. A skillful manipulation of this feature would make coke adaptable and satis-

Jan 1, 1925

By J. H. Emrick

When I was asked to read a paper to you, I wondered what idea I could bring before you which would be interesting and which would be helpful in your work in operating coal mines. The Institute has been studying ways and means of increasing the safety and efficiency of mine operations. Almost every subject along this line has been discussed from time to time. In thinking the matter over it occurred to me that there was one thing used by practically all coal mining companies in considerably large quantities and which in many cases does not receive the attention it should. It is the cutter bit placed in the cutter chains on coal mining machines. Coal mining machines have been repeatedly improved during the last twenty-five years until their efficiency and convenience have reached a high level. The generating units making electrical power to operate them also have been developed to a similar degree. This machinery has been in- stalled at a great expense to coal mining companies and the installation made for the sole purpose of pulling coal cutter bits through coal. Why not then give these cutter bits some attention so as to see that they do their work as efficiently as their driving and propelling units? The consideration of this question easily divides itself into three principal parts-First, the kina of steel out of which to make the bit; Second, the proper form or shape to give it; and Third, the tempering of the bit. Let us discuss them in that order. There have been tried at different times' various grades of steel for cutter bit uses. The cheaper steels, having a very low carbon content (.10 to .30 per cent carbon) have proved un- satisfactory because such steel cannot be tempered so as to produce a satisfactory cutting tool. Because of the low carbon content, it cannot be hardened to retain its cutting edge. It dulls quickly, bends easily on striking any hard obstruction in the coal, and so requires constant resetting to its original form. The high priced alloy steels when properly shaped and tempered will give a bit that would make a clean, even cut in the coal if no impurities were encountered. Such a condition is rarely found. Alloy steel is quite brittle and on striking impurities, such as sulphur balls or a sand spar, is readily broken and so the loss of material through these broken bits and the high price paid for it more than offset all the other advantages which this steel has shown in cutting. Experience has shown that steel having approximately .70 per cent carbon and from .25 to .35 per cent manganese will give the most economical results. Some mines have obtained better results by using a steel of slightly higher carbon content and in some cases a grade of tool steel has been used. The disadvantage of using a steel having too much carbon is that it can easily be spoiled in the black- smith shop by overheating. Steels having a carbon content of about .70 per cent have a sufficiently wide range of temperatures at which they can be forged and hardened so that with ordinary care and attention they are not likely to be burned. Steel of this quality, therefore, has been found to be the most practicable because of its reasonable cost, ease in working and tempering and general durability. In the early days of mining machines, comparatively few bits were used because each machine required but a few bits because there were but

Jan 1, 1925

By Geo. A. Murphy

MR. ARTHUR E. GIBSON (General Manager, Consumers Mutual Coal Company of Utah) : I suppose the reason I was called upon to read this paper was because I was at the mine for several years, but I have not been there for the past four years and the installation has been put in since I left. This article has been written by my successor-it follows: At the very urgent solicitation of your Secretary I have consented to prepare this paper descriptive of the spiralizing plant which is a part of the new steel tipple recently erected by the Spring Canyon Coal Company to serve its mines at Spring Canyon, Utah. I have been reluctant in giving this consent for two reasons: one of which is an excellent one, and the other isn't any good at all. First,, I find that it takes a long time to become familiar with the eccentricities of spirals-to get wise to their whims and peculiarities, and while this plant has been in operation for a number of months, something new seems to crop up nearly every time I see it, and -it would be impossible to describe all of these things even if I remembered them. The second reason is, purely personal. Among the many things I have learned by attending the sessions of the Rocky Mountain Coal Mining Institute is that if a man is not pretty sure of the ground he attempts to cover, he had better keep his mouth shut, because if he isn't right, he is dead sure to be called down by someone. However, as I will not attend the session, this feature will not hurt much, but it will make it necessary for someone else to read the paper and this will make it much better for those who are obliged to listen to it because I don't read English very well. To begin with I will say that what is said in this paper applies only to the plant under discussion as I have had no experience with any other plant. While spirals have been in use for quite a number of years, and there are some large plants in the East, their use has not been general, and I believe the plant at Spring Canyon is the only one in the United States west of the Mississippi River. The details of the plant were worked out by Mr. Thos. R. Stockett, General Manager of the Spring Can= yon Coal Company; it was manufactured by the Anthracite Separation Company of Hazelton, Penn., incorporated in the design and erected by the Link-Belt Company of Chicago, in connection with the balance of the tipple. It consists of five units. Each unit consists of a vertical wood column about 6 inches in diameter, and 9 feet 6 inches in height, around which the spiral is built. It is something like a triple screw conveyor, set vertically, with flights down which the coal and refuse travel by gravity in the process of separation. There are three of these flights, forming a sort of nest but about 7 inches apart, and they make 21 turns around the column in its length. These flights dip toward the column about 27 degrees; they have a uniform pitch downward of 31 degrees; they are 19 inches wide at the top (measured from the column) and taper gradually until they are about 9 inches at the bottom. They are not made with one continuous plate from top to bottom, but are made up of a number of plates. Some of these plates are slightly waved, others have small corrugations in them and still others are perforated with small holes, all of which are intended to accelerate or. retard the movement of the coal and refuse as they pass down, At intervals there are adjustable plates in the flights for the purpose of decreasing the maximum outside;

Jan 1, 1926

By Fredrick D. Palmer

U.S. ENERGY: PUTTING PEOPLE FIRST Assessing Goals, Needs and Resources ?Decision-makers must balance the needs of average Americans with the need for: ?A strong economy ?A clean environment ?A secure nation ?Events of recent years ?terrorist acts, multiple energy crises and a global focus on sustainable development ?magnify the need to balance these principles ?Coal ?domestic, abundant, affordable and increasingly clean ?meets these needs like no other energy source

Jan 1, 2003

Jan 1, 1963

Please note all Proceedings of the Institute were taken verbatim by stenotypists from Hyatt & Associates of Denver and editing has been minimal. MR. MORTENSEN: On behalf of the Rocky Mountain Coal Mining Institute, I take great plea¬sure in saying good morning to you at Vail. With a few clouds in the sky, at least we won't get sunburned. We won't have to worry about our kids in the swimming pool, perhaps. It is delightful for me to have been able to have represented the Rocky Mountain Coal Mining Institute for the year 1982-1983. This has been our 71st year and this is our 79th meeting. In recognizing the attendance here, that dinner we had last night, and some of our entertainment must have gotten to some of us, or it is a little early. But I'm sure as the day goes on, and with the speakers outlined, it will be very beneficial for those who do attend. We do appreciate your attendance. I'd first like to make an introduction of our head table. Doris Finnie, she is our executive secretary. As most of you are aware, Gussie Whiteside retired as secretary. This will be the first time since the Institute started that there has not been a Whiteside present at one of our conventions. I'm sure Gussie would appreciate any calls or letters that any of you would care to make to her. Doris, I might add, has been a great help to me and all of the people who have been working on the program for the Institute this past year. There's been lots of reorganization and we are very pleased with Doris's ability to take hold from Gussie without any waves. Much credit must be given to you Doris for this and we do appreciate the help you have given us and believe me she has kept us out of trouble. Next, we have Art Neill. He is our vice president of the Institute from Montana and he also works with Western Energy Company. We appreciate the help that all of these session leaders and chairmen give to us. We have other names on the head table, but they will fill in as the morning goes on, so we won't bother you with any of those at this time. To set the stage for business, first I would like to call on Doris for a motion to approve the minutes of last year. MS. FINNIE: Thank you, Vernal. Mr. President, I suggest that the reading of the minutes be dispensed with and that the members refer to pages 9 through 80 of the Proceedings for the 78th regular meeting of RMCMI, as published MR. MORTENSEN: Thank you, Doris. Do we have a motion to so approve? MR. LINVILLE: I so move. MR. MORTENSEN: Loren Linville so approved. Do we have a second? MR. GARR: Second. MR. MORTENSEN: All in favor say aye. (Audience responded affirmatively.) MR. MORTENSEN: Those opposed? Hearing none, the motion is carried. I'm sure glad we didn't have to read those 80 pages. Is Doug Hammer in the audience? He was going to give us a list of new members of the Coal Institute and ask for your approval. But because of his absence, the names will be listed so that you can read them at a later date, I will entertain a motion that we approve the new members who have joined the Institute. Do I so have a motion? MR. BERNSTROM: I would make that motion. MR. GARR: I second. MR. MORTENSEN: Do we have any questions? All in favor¬ (Audience responded affirmatively.) MR. MORTENSEN: Any opposed? Hearing none, the motion is carried. Next, we'd like to proceeed with our Nominating committee report from the chairman, George Nugent, and the election of next year's officers. George, would you please take the stand? MR. NUGENT: Mr. President, and members of the Institute, your Nominating committee consists of five past presidents of the Rocky Mountain Coal Mining Institute. From Colorado Roy Coulson; from New Mexico, Bob Wilson; from Utah, Bob

Jan 1, 1983

The following pages contain valuable information about the products and services offered by our advertisers

Jan 1, 1982

[ ]

Jan 1, 1995

PRESIDENT LITTLEJOHN: Until Mr. Wood comes back, we have a gentleman with us who has been sitting in one of the back seats. He has never gotten up and showed himself, and I think we ought to call on Mr. Ryan to stand up and say two words, or a half dozen words. Mr. Ryan! (Applause.)

Jan 1, 1925

This session was devoted to Surface Mining. Presiding was Virgil W. Carmichael, Vice President- Exploration, North American Coal Corporation, Bismarck, North Dakota, and John (Jack) F. Ratchye, Manager of Marketing and Resources, Peter Kiewit Sons' Co. Mining District, Sheridan, Wyoming. Subject-The new Federal Surface Mining Regulations-a thorough briefing as to content of law and how it will affect western mining. Introductory Speaker: William Hynan, Senior Vice President, National Coal Association, Washington, D.C. (See index for printed text of Mr. Hynan's paper.) Panel Members: The first speaker was George M. L. Robinson, Senior Hydrologist, Peabody Coal Company, Denver, Colorado. Mr. Robinson has a B.S. Degree from New Mexico University, Portales; Masters in Hydrology, Kent State, Ohio.

Jan 1, 1978

MR. MARGOLF: Our final speaker this afternoon before we have an opportunity for some questions for the members of the panel, is a gentleman who has spent more than 40 years in the newspaper industry. He started out as an office boy while he was still in high school. He worked his way through college working for a newspaper in Lexington, Kentucky where he graduated from the University. He has a long association with the Albuquerque Tribune but what brings him here today is in his position as editor of The Rocky Mountain News which is certainly one of our largest circulations. I think it is the largest circulation newspaper in the Rocky Mountain states. Ralph Looney, in that

Jan 1, 1982

Jan 1, 1927

Jan 1, 1977

Jan 1, 1927

Jan 1, 1929

Presiding: Herman Van Houten, Senior Marketing Counselor, Joy Mfg. Company, Pittsburgh, Pa., and John A. Reeves, Vice President, Mid-Continent Coal &Coke Co., Carbondale, Colorado. The Keynote Speaker, Senator Jennings Randolph from West Virginia, was unable to come due to pressing business in Washington. A film presentation on Surface Mining and Reclamation, "Energy Bridge," Courtesy of Pittsburgh & Midway Coal Mining Company, Denver, Colorado, was shown and was prefaced by comments from James V. Fisher. "Advantages of Longwall Mining in Western Coal Production" was a paper presented by David W. Wisecarver, Supervisory Mining Engineer, U.S. Bureau of Mines, Denver, Colorado. Mr. Wisecarver graduated from Virginia Polytechnic Institute in 1949. After two years with International Harvester and two years in the U.S. Army, he joined the engineering staff on a Bureau of Mines underground mining operation in Virginia for eight years where he saw duties as mine surveyor, shift boss, and assistant maintenance superintendent.

Jan 1, 1977

By Jerry M. Eyster

The Bush Administration is committed to reducing emissions from existing power plants Candidate George W. Bush said: The key to reducing emissions from older power plants on the federal level is to cap emissions on a level that makes sense?. And harness the power of the market place and provide economic incentives to produce better environmental results. I would want to make sure that any program we pursue does not result in excessive and unnecessary increases in electric bills.

Jan 1, 2002

Preceding the regular meeting, "Harvest from the Sky" was shown, an action-packed movie demonstrating how man and machines provide Denver with water. This vividly colored picture illustrated the magnitude of the job, highlighting the construction scenes at the 23-mile Harold D. Roberts tunnel, many scenes of which were taken underground at the face. Presiding was Mr. John Peperakis, Alanager, Sunnyside Operations, Kaiser Steel Corporation, Sunnyside, Utah, who called the regular meeting to order at 9:30. Mr. Peperakis introduced Mr. Otto A. Wiesley, Chairman, Industrial Commission and Utah Labor Relations Board, Salt Lake City, Utah, who spoke on "Functions and Policies of the Industrial Commission of the State of Utah." It was with obvious pride that he discussed the Medical Panel in use and the successful operation of the Indus- trial Commission in Utah, stressing the fact that the most important word in their vocabulary was "cooperation." (The text of his address appears later in these proceedings; see index for page number.)

Jan 1, 1959

By Kirk Nobis

Develop a Risk Management Plan for Your Mine ? Why? ? Measuring ? Managing ? Conclusion

Jan 1, 2006

The Fortieth Regular Meeting of the Rocky Mountain Coal Mining Institute was called to order in the Hotel Utah, Salt Lake City, Utah, Wednesday, June 10, 1942, at 11:30 a.m., by President, Wetzel, who presented Mr. William A. Fealey who, in turn, introduced Mr. Bracken Lee, Mayor of Price, Utah, who made the address of welcome. President Wetzel then made a few remarks. The Secretary announced with regret that, due to the critical illness of Mr. Sidney Hale, he would be unable to at- tend the meeting. On motion of Charles M. Schloss, duly seconded and carried, the reading of the minutes of the Thirty-ninth Regular Meeting was dispensed with. Mr. Schloss also moved that the Chair appoint the usual committees, which motion was seconded and carried. President Wetzel then announced that the committees would be appointed during the afternoon session. Following routine announcements, the meeting recessed at 12 o'clock noon to reconvene at 1:30 p.m.

Jan 1, 1942