Search Documents

By G. R. Hopkins

According to reports received by the Bureau of Mines, Department of Commerce, as of January 1, 1929 there were 413 completed refineries in the United States, with a total daily crude-oil capacity of 3,509,540 barrels. In addition, 14 refineries, with a potential capacity of 99,000 barrels, were being constructed. Of the completed refineries, 341, with a capacity of 3,325,890 barrels, or 95 per cent of the total capacity, were in operation; and 72, with a capacity of 183,650 barrels, or 5 per cent of the total, were shut down. The improved condition of the refining industry in 1928 was indicated in several ways; namely, in an increase in the total capacity of the completed plants, in the opening up of a few plants which were shut down during 1927, in a decrease in the number of plants dismantled, and in an increase in the number of plants under construction. The majority of the refiners have followed a steady expansion program commensurate in most cases with the increase in demand for petroleum products. Obsolete equipment has been dismantled and modern equipment has been installed, with the net result that the total capacity of the completed refineries in the United States has shown a steady increase since January 1, 1918, the date of the first Bureau of Mines survey. Between January 1, 1928, and January 1, 1929, the number of completed plants fell from 423 to 413, but their total capacity increase 259,160 barrels, or 8 per cent. This compares with an increase in runs to stills of domestic and foreign crude petroleum of 10 per cent, and of domestic crude alone of 7 per cent.

Jan 1, 1929

By Alexandra Prevost, Rodrigo García

El artículo analiza cómo contribuye la actividad minera de Nexa Resources al desarrollo de sus comunidades aledañas, alentando la formación de empresas comunales para canalizar aquellas oportunidades de negocio que la empresa puede ofrecer. Entre otras cuestiones de interés, el texto detalla las expectativas y nivel de satisfacción de los comuneros con relación a las empresas comunales y a la empresa minera, tanto como las expectativas que tiene la minera respecto de las empresas comunales. Se identifican, asimismo, las principales dificultades que presenta este tipo de contratación, así como los efectos positivos obtenidos.

Aug 30, 2020

Background information, formulae and a systematic set of procedures for estimating capital and operating costs for open pit mining equipment are presented in this paper. Firstly, equipment capital costs are required. These can be obtained from either suppliers, contractors or from first principles. The equipment is then divided into cost elements. Typically these are fuel and power requirements, spare parts consumption, wear items such as tyres, teeth and drill bits and finally repair and operating labour requirements. By consideration of the cost and life of each element a base cost can be derived. The base cost is then adjusted to suit specific site conditions such as the proximity to spare parts suppliers, the duty or ground conditions and the management and operator skills specific to the site. Hence, the same item of equipment can be costed to reflect different operations. Included are tables and data for typical plant items. Several examples are also given to illustrate the methodology being presented. The intention is to provide a set of procedures to allow costs to be built up from base level in a systematic and repeatable way. Applications for these costs include feasibility studies, budgetting and data for economic analyses.

Jan 1, 1990

By José Fernandes De Oliveira Ugarte

El presente texto señala los resultados de la caracterización mineralógica de muestras pertenecientes a yacimientos hidrotermales de Lima y así conocer laa mineralogía de de diferentes minerales de plata y sus respectivas asociaciones, así como sus relaciones geoquímicas. Así para evaluar la afinidad de la plata, se realizó el estudio geoquímico estadístico con los minerales alabandita, rodocrosita, pirita, esfalerita, galena, arsenopirita y calcita obtenidos por difracción de rayos X. El contenido de plata se obtuvo con los análisis químicos por fluorescencia de rayos X.

Jun 1, 2013

By Oswaldo Ortíz Sánchez

El objetivo del texto es señalar el concepto de entrenamiento y cuáles son las necesidades básicas del supervisor dentro de una industria minera. Para ello es necesario definir el entrenamiento como un conjunto de procedimientos empleados para facilitar al personal la adquisición de habilidades, conocimientos y actitudes, convirtiéndolo en un medio y una forma de mejorar el índice de productividad del trabajador. Asimismo, es necesario conocer cuándo se debe entrenar, la motivación que implica la satisfacción, los métodos y las etapas de su descubrimiento, las reuniones con el personal, la relación del supervisor con sus trabajadores y el planeamiento de seguridad. En este último punto, es importante señalar la habilidad de la enseñanza del supervisor, como las etapas de la capacitación: preparación, presentación, aplicación, examen y discusión.

Aug 20, 1965

NEW MEMBERS. The following list comprises the names of those persons who became members during the month of April, 1913: BARNES, BLAKESLEE, Min. Engr Burrwood, La. BOYLSTON, HERBERT M., Cons. Met. Engr 26 Abbot Bldg., Cambridge, Mass. BUEHLER, HENRY A., State Geol Rolla, Mo. CASTO, WILLIAM H., JR., Mining Bonanza, Idaho. COHEN, MAXWELL B., Mill Operator Miami, Ariz. EVANS, MILTON R., Shop Draftsman 92 Division St., Kingston, Pa. HARPER, WALTER S., Asst. Treas 42 Broadway, New York, N. Y. JAMES. JAMES S.. Min. Engr Telluride. Colo.

Jan 5, 1913

This paper discusses the social and economic impact of mining, and in particular goldmining, on New Zealand. The range of topics covered and their complexity has confined us in this paper to highlighting the main points of concern û a detailed report is under preparation. A major problem in undertaking this study was the lack of hard data on important environmental, economic and social issues and if there is to be effective planning in the area of natural resource use this situation must be rectified. The following conclusions were drawn: Goldmining was very important in shaping New Zealand's early social and economic development, providing wealth, employment and impetus for social change.Foreign investment and technology has been an essential element in New ZealandÆs economic development.Mining is a small industry at present by this must not be allowed to obscure its potential to broaden New Zealand's economic base and provide foreign exchange.With modern methods, development of mineral resources and environmental protection are not incompatible but certain unique and irreplaceable areas must be preserved.There are problems in evaluating mining and other projects because different groups hold different values, and arguments often hinge on the valuation of costs and benefits rather than the technical aspects of the analysis.Mineral exploration is a high risk business and the potential returns must be sufficient to attract capital if New Zealand's mineral resources are to be developed.A resurgence of goldmining will clearly have obvious benefits for Waihi but the local community must plan carefully for their future. New Zealand will also gain valuable foreign exchange required for higher levels of economic activity.

Jan 1, 1981

By B. J. Schat, A. W. O. Bots, O. S. Langhorst

Amsterdam City Council is building a new metro line, the North–South Line. The line passes under Amsterdam Central Station (a listed building) about 18m below street level. The retaining wall that has to be built underneath the existing building is an innovative construction consisting of two rows of steel piles interspersed with a solid mass of overlapping jet grout columns: a composite ‘sandwich’ wall. This paper gives an overview of the approach taken to designing (computational models) and building the retaining wall. Special attention is paid to the observational method used for the construction of the jet grout columns.

Jan 1, 2007

This report describes Phase I of the project --Development of a Mechanized Scaler --performed by Battelle, Pacific Northwest Laboratories for the U.S. Bureau of Mines. The objectives of Phase I were to 1) assess the needs of the industry as related to mechanized scaling; 2) conceive, evaluate and select mechanized scaler concepts; and 3) prepare preliminary designs of the selected machine concepts. To assess the scaling needs of the industry, we reviewed both U.S. and foreign literature, evaluated U.S. scaling accident statistics, reviewed existing mechanized scaling equipment, performed a series of mine visits and telephone interviews with mine operators, and assessed the applicability of a loose-rock detection system. The literature review identified over 25 scaler-related articles. However, little of the information could be used directly in the conceptualization and design portions of the project. Three articles did supply information on a number of machines used in Europe, along with statistics describing their effect on mine safety. For example, the French reported a 50% reduction in the total number of scaling-related accidents and a full 80% reduction in the number of lost-time injuries in the Lorraine mining district.

Jan 1, 1981

By WL Wagner

This report presents a quality control approach to the derivation of strategies for monitoring a work environment; specifically, the environment in underground mines where diesel-powered equipment and blasting agents are used. The approach is presented as a series of 22 steps called the Monitoring Strategy Development Scheme. The scheme is an orderly method for selecting from a number of options a strategy or tactics to cost effectively meet the requirements of a chosen objective related to the monitoring of breathing zone air quality. The scheme provides a format to quantify many of the factors that influence the selection of on strategy or tactic over another, and to ensure that important considerations are not neglected. The premise that breathing zone air in work environment can be considered to be manufactured product and that, therefore, conventional quality control approaches are applicable, is introduced. Typical approaches to the quality control of manufactured products and how these approaches can be applied to the selection of monitoring strategies are discussed.

Jan 1, 1983

By Victoria Frisancho Motta

El proceso de intercambio iónico es una operación de importancia en la hidrometalurgia peruana ya que posibilita el tratamiento de minerales considerados de ley demasiada baja en la actualidad por los métodos convencionales. En ese sentido, no solo es posible las comparaciones favorables en costos con los métodos de precipitación, lixiviación y fundición técnica, sino que también la alta pureza del metal puede ser obtenido por la hidrometalurgia. Por ello, el presente trabajo señala la función de las bacterias como agentes modificadores del orgánico mineral, las cuales migran por los circuitos de orgánico y electrolito de los sistemas de extracción por solventes y electrodeposición, de acuerdo al grado de reacción en la extracción o reextracción de los minerales a tratar.

Nov 20, 1978

By Rolando Patiño Patroni P

El presente estudio revisa la fisiografía, geología, tipos de metamorfismo, efectos de intemperismo y trabajos de exploración en las minas de Marcona. La zona minera de Marcona está ubicada a 800 m.s.n.m del sur de Lima, Ica, cuyo terreno está comprendido por una plataforma costera, donde la erosión no solo ha producido afloramientos de rocas resistentes, sino también de cuerpos de mineral. Su geología está compuesta de rocas que se subdividen en sedimentarias, volcánicas, ígneas y metamórficas. Asimismo está el granito de San Nicolás, andesita porfirítica, granodiorita y los intrusivos básicos. Su estratigrafía se desarrolla por el aluvión, la formación Pisco, Copara, los volcánicos Nazca, formación Cerritos, Marcona, Complejo Lomas. Entre los efectos del intemperismo está la zona de lixiviación, zona superior de sulfatos, zona inferior de sulfatos y la zona de sulfatos primarios. Finalmente, los trabajos de exploración se realizan a través de los levantamientos magnetométricos (prospección), perforaciones a percusión seca, sondajes diamantinos y las labores subterráneas.

Jul 20, 1959

By Jhon Melo

Los “softwares de aplicación” como herramientas en la exploración geológica, generan importante información geográfica sobre el área a estudiar, así como la cartografía y la toma de muestras en laboratorio. En ese sentido, el presente texto señala el manejo adecuado de dichas herramientas a través del uso de una base de datos, donde existe una estructura basada en el software (VISUAL FOXPRO, PARADOX, etc) y asi ejecutarla mediante una aplicación gráfica que permita tener una representación de lo estudiado como ocurre en un muestreo geoquímico.

May 25, 1998

By R. W. Raymond

On the Manchuria. SOMEWHAT fatigued with excess of enjoyment and strenuous continuity of movement on the trip to and through California, the members and guests of the Institute party embarked Tuesday, Oct. 17, on the Pacific Mail S. S. Manchuria for a further journey to and through Japan. The good ship displayed the flag of the Institute (blue cross-hammers on a white ground), together with the Stars and Stripes and the ensign of the company. Uninterrupted fair weather and smooth water attended the passage to Honolulu. The Manchuria proved herself most commodious, comfortable and clean ("A sweeter steamship never sailed," quoth President Hunt) ; Captain Dixon and his officers were most agreeable, as well as most efficient; the passenger list comprised many congenial people besides ourselves-among them a score of missionary folk, and also Mr. M. H. de Young, Vice-President of the Panama

Jan 1, 1912

By Juan Ayza

Dado que la geología económica estudia las materias del reino mineral que el individuo extrae para sus necesidades vitales, el presente texto señala la relación de ciertos minerales (estaño, tunsgteno, antimonio, manganeso, oro, plata, cobre, zinc) de la zona minera sur del Perú, con la geología regional y sus contribuciones económicas a través de personalidades como Balta, Steinmann, Dueffas, Douglas, Bulman, G. Peteraen, Newell, Heim; Newell, Chronic y Roberts; Jenka, Ahlfeld y Bruggen. De acuerdo a este estudio geológico se infiere que tanto el oro y el hierro pertenecen a la costa, así como los yacimientos de plata, plomo y zinc son de la cordillera volcánica, la línea de tungsteno de Cabanillas se encuentra asociada a granitos, los depósitos telegramáticos de cobre, antimonio, mercurio y plata, se encuentran relacionados a líneas tectónicas en la depresión del Titicaca. Asimismo en el yacimiento oriental, tenemos el peri y apomagmáticos de calcopirita, plomo-zinc, plata, plomo-plata, antimonio, oro, tungsteno y estaño. Finalmente, la repartición de zonas mineralizadas responde a dos causas: la asociación a varias clases de intrusiones y la relación directa a distintas categorías de líneas y regiones tectónicas.

Jul 20, 1956

By William O. Vanderburg

[This circular is one of two papers on the tungsten industry in the United States end contains general information on the subject. The second paper which will be issued in the near future deals with the methods ailed costs of mining and milling tungsten ores. These two papers are abstracts from the general bulletin on tungsten which will be issued at some future time Modern civilization and progress depend largely on tools wherewith the forces of nature are brought under control and directed toward human comfort. These tools are made chiefly from metals derived from the earth's crust. During the present century powerful tools have been made available through the development of ferrous and. nonferrous alloys containing such elements as molybdenum, vanadium, titanium, tantalum, and tungsten, which were little used before 1900. One of the most important of these so-called rare elements is tungsten; its use ins alloys for high-speed cutting tool is partly responsible for the era of mass production. So widespread has the use of alloys become that the period may be termed an "Alloy Age".]

Jan 1, 1935

By John D. Rockaway

Failure of the mine floor supporting coal pillars frequently occurs when the subcoal strata include "underclays" or other low strength strata. The failure process has been studied to define the response of these materials to applied coal pillar loads and to determine the applicability of bearing capacity analysis to evaluate unsafe conditions. The study has been accomplished through an investigation of both the intact and insitu geotechnical properties of the subcoal strata and through the installation of floor movement monitoring instrumentation. The results of these studies have indicated that both the shear strength of the underclay and the stratigraphy of the subcoal strata must be considered in the analysis. The shear strength was the major controlling factor determining the ultimate load carrying ability of the materials, but the thickness and stratigraphic position of the weak layers influenced the mechanism of the failure process. The methods of bearing capacity analysis were used to define pillar stability that included provisions for taking into consideration a two-layer system. Conditions assumed for a coal mine where a weak underclay overlies firmer strata. The results of the analysis compared very well with observed mine conditions, indicating marginal conditions in areas of the mine which later experienced pillar support failure. In addition, a "heave factor" was derived to predict potentially unstable floor conditions in the mines studied in detail.

Jan 1, 1979

By Calzado P. Luis E.

El presente estudio describe el comportamiento de un residuo de lixiviación bacteriana al tratamiento de lixiviación ácido-clorurante con el fin de extraer el contenido de plata. En este sentido, los parámetros que tienen influencia sobre la eficiencia de lixiviación son la granulometría y la temperatura de solución. Asimismo, la evaluación de las transformaciones desarrolladas en el material se realizó a través del microscopio electrónico de garrido y y en base a los argumentos del orden mineralógico, se evidencia que la limitada extracción de plata se debe a las fases estables de las condiciones empleadas por la ocurrencia del cobre gris y un mineral complejo de hinsdalita con contenidos de plata.

Nov 24, 1993

By Víctor Barrientos

El presente texto describe una de las formas de liderazgo en el manejo de información de las empresas a través de la técnica de Barrientos y cómo su metodología fue aplicada para el mejoramiento de la información del mantenimiento en una mina a cielo abierto. Para ello, se revisa la gestión de activos, estrategias del cambio y el liderazgo situacional con el objetivo de que alcancen el mayor nivel de desarrollo frente a una meta específica.

Oct 1, 2016

U.S. Bureau of Mines contract H0122053, "Improved Sensors and Fire Control Systems for Mining Equipment", was an investigative effort involving: ? Study of the fire problem on large mobile mining equipment ? Identification of equipment most prone to fire, to serve as a design case example ? Design of an improved fire protection system ? Demonstration of the developed system This effort was performed during the period June 1972 through May 1973, and was conducted in two phases. Phase I, June through November 1972, was devoted to identifying the fire problem and developing and evaluating design criteria. Phase II involved translating the design into hardware and demonstrating its effectiveness during actual fire tests, first on a wooden mockup of a truck, then on an operating truck at a working mine site.

Jan 1, 1973