Search Documents

By Eugen Gluck, Gus Van Weert, Peter Kondos

"Microwaves have the capability to heat up sulphides, especially clusters of particles of approx. 1 mm. Some sulphides absorb microwaves more readily than others. Molybdenite is especially effective in this regard, possibly due to its flaky nature and/or electrical conductivity. Even where it occurs in low concentrations in a deposit, individual rocks may be ore grade due to the high monetary value of MoS2. Such rocks often result from crushing mined veinlets or stockwork, or are contained in the cutoff grade fraction of ROM. Machine segregation of rocks high in MoS2 by infrared sensors after microwaving could therefore advantageously be used to upgrade lower grade ore between Mine and Mill. This would reduce the size of the latter, and thus its CAPEX and OPEX. Such upgrading could also yield shipping ore for a distant Mill, or extend ore reserves.Barrick Gold Corp. has been supporting the development of MW/IR sulphide sorting for the past three years. The results of MW/IR sorting work on molybdenite and other (pyritic) ore samples from a variety of sources are being presented here.INTRODUCTIONThis paper looks at mechanized, i.e. machine ore sorting technologies currently available and under development, and what conditions would be needed for the potential application of such ore sorting to sulphide mining and milling. Current machine sorting involves no-contact sensing technology for rocks, and signal processing after sensing to activate airblast segregation of certain rocks, normally the smallest mass to keep compressed air costs down.The forerunner of modern sorting is probably magnetic separation, which utilizes an inherent property of certain ores to divert it into mag and non-mags fractions. Radiometric ore sorters, which have been applied successfully for decades in the pre-concentration of uranium ores (Wotruba and Riedel, 2006) initiated modern sorting. In the 90’s, sensor-based machine sorting became a viable means of increasing the overall economic recovery of a resource. This technology became driven by the availability of low cost computing equipment and the concurrent development of algorithms, and by the availability of extremely fast response sensors and air actuators, allowing the sorting equipment to run faster, dropping the cost per tonne. It has been in industrial minerals processing that rock sorting has been most widely adopted, not really surprising. Liberation occurs on a different scale than in the base metal industry. Most industrial minerals are mined from massive deposits, requiring (in the past) no upgrading. Many of these operations now run into product contamination problems, which ore sorting can solve. One illustration: in Finland, a quarry is separating limestone from dolomite at 500 tonnes / hour, with individual rocks weighing up to 15 kg. Many of these industrial minerals operations have stockpiles of earlier discarded below-quality rocks, now being reprocessed with the help of ore sorting. The economics of this are very favourable, going from zero or negative value (stockpiles can not be left when closing the mine) to full product value for at least a portion of the stockpile. This suggests that in the future the economics of overburden sorting could become attractive under the right circumstances and such treatment could well become an integral part of open pit mine development."

Jan 1, 2009

By Oswaldo Bustamante

El presente texto describe los resultados de medición de energía libre superficial a través del Microscopio de Fuerza (MFA) y su relación con la hidrofobicidad y posterior flotación de partículas de oro. Para ello, se evalúa la adsorción específica de los colectores sobre partículas de oro, el cual permite medir la diferencia de energía libre superficial y su relación con la recuperación del oro en la flotación espumante.

Nov 1, 2014

By Elmer Vidal Sánchez

Dado que la voladura de rocas en minería y construcción genera vibraciones de terreno, ocasionando daños a las instalaciones cercanas a la operación, se ha visto necesario realizar un control de las vibraciones por medio del criterio de velocidad pico de partículas. De acuerdo a este criterio, para toda voladura existe una mínima cantidad de explosivos a detonar dentro de un intervalo de 8 milisegundos. Sin embargo, no considera la variable "frecuencia" como parte del control de vibraciones. En este sentido, el presente texto describe una alternativa diferente para el control de las vibraciones denominada "análisis de frecuencias", cuya técnica se basa en un modelo computarizado que controla y predice las vibraciones en un lugar específico, considerando las condiciones geológicas existentes entre el lugar de la voladura y el punto de interés.

Aug 26, 1988

By Walter Casquino

La presente investigación describe las diversas etapas por las que atraviesa el proyecto minero, la medida de su eficiencia y los métodos para la medición de la eficiencia. Las etapas de la inversión comprende: los estudios de pre-inversión, financiación, construcción y la etapa de operación. La medida de su eficiencia se realiza a través del grado de precisión que implica el requerimiento de información de una precisión similar. Finalmente, entre los métodos de medición de la eficiencia está el rendimiento económico, operacional y de recursos humanos.

Nov 20, 1978

By J. D. Noll, S. E. Mischler

Measurement and sampling of diesel particulate matter in mine air presents a challenge due to the complexity of the diesel aerosol. The results of a series of tests carried out by the National Institute for Occupation Safety and Health, Pittsburgh Research Laboratory, in an underground mine were used to evaluate several measurement methods that are currently used to characterize particulate matter emitted by diesel-powered equipment. This paper presents an overview of these techniques and examples of the results along with a discussion of the advantages and information gained by each technique. The measurement methods discussed include particle size measurements using a scanning mobility particle sizer, total particulate matter measurements using a tapered elemental oscillating microbalance, a size selective sampling method for workplace and personal exposure assessment and a size-selective high volume sampling method for carbon analysis.

By Silvio Hernández Aquije

El presente texto señala el plan de desarrollo de producción del vanadio, su industrialización y mineralogía a través de medidas que promuevan la explotación del metal. Asimismo, dentro de los métodos de explotación tenemos los de destilación y flotación sola, los cuales buscan destilar las asfaltitas para obtener por un lado materias volátiles y por otro, coke, así como el tratamiento mineralúrgico para el beneficio de cenizas vanadíferas.

Sep 1, 1973

By T. G. Chapman

This paper has been abstracted from a forthcoming Bureau of Mines bulletin on the concentration of copper ores in North America. GENERAL DEVELOPMENTS IN CONCENTRATING COPPER ORES FROM 1912 TO 1932 During the east 20 years the milling of copper ores as practiced in the larger concentrators has chanced to such an extent that comparatively few of the machines in use at the beginning of this period remain in service today. Concentrating Practice in 1912. In 1912 the usual equipment for concentrating copper ores comprised jigs for the coarser sizes, tables and sand vanners for the intermediate sizes, and vanners for the finer crushed and ground material. Rolls operated in series under graded crushing conditions, were in common use for the liberation of the copper minerals; grinding by Chilean or Muntington mills ordinarily was confined to the coarser tailings of jigs and tables.

Jan 1, 1934

This report presents the results of a study for the Bureau of Mines to compare loan terms for non-fuel mineral projects in developing countries, from various International Financial Institutions (IFIs), and from private sector commercial sources. The study compares IFI and commercial loan terms for seven mineral projects in developing countries. The International Financial Institutions represented are: ? International Bank for Reconstruction and Development (World Bank) ? International Finance Corporation (IFC) ? Inter-American Development Bank (IDB) ? Asian Development Bank (ADB) ? International Monetary Fund (IMF) In addition, the costs of financing for these mineral projects were compared with the costs of long-term debt to the five largest U.S. mineral producers.

Jan 1, 1986

By Sergio Samuel Sarmiento Sobrino

Dado que toda actividad minera genera relaves -en tanto son altas concentraciones de químicos y elementos que alteran el medio ambiente- estos deben ser transportados y almacenados en «tanques o pozas de relaves» donde lentamente los contaminantes se vayan decantando en el fondo y se pueda recuperar el agua. En ese sentido, el presente texto señala el manejo de relaves compactados en el depósito de Ramahuaycco, a través de desaguar los tóxicos antes de ser depositados. Así, los relaves filtrados son primero espesados y luego filtrados para el contenido de agua adecuado para su disposición. Por razones de estabilidad, los relaves filtrados requieren ser compactados a través de la desecación de relaves in situ.

Aug 1, 2015

The extremely cold weather and heavy snowstorms of January and February in northeastern Pennsylvania--with frozen mining equipment, diminished preparation and lack of railroad cars--severely hampered the production and distribution of anthracite. As a result, the previous estimates for the 2 months have been revised. On March 1, 1977, at the Porter Tunnel of the Kocher Coal Company at Tower City, Pa., an underground flash flood, which apparently broke through the wall of an adjoining abandoned shaft, swept through the mine. As of March 9, 1977, four miners were reported killed, three injured, and five trapped in the wreckage. The Kocher Coal Company began operations at the Porter Tunnel in 1968 and has had no fatalities until this current tragedy. The mine employs 20 persons on the surface and 115 miners underground, producing 750 tons of coal per day. Of the 109 underground mining operations in the anthracite region, this is the one remaining large mine that employs over 100 men.

Jan 1, 1977

By Alexis Cotrado

Shahuindo, es un yacimiento único en su género, se encuentra en un prolífico cinturón que produce oro en el norte de Perú, a 30 km al norte de la Unidad Minera La Arena. La operación es un tajo abierto usando operaciones convencionales de perforación/voladura, carguío y acarreo. El método de minado es a tajo abierto con un movimiento promedio de 87,500 TPD de roca y 36,000 TPD de Mineral. El presente trabajo muestra un ejercicio de optimización de las reservas minables comparando el valor del proceso chancado & aglomerado (C&A) y el proceso ROM, usando técnicas de optimización de la ley de corte para agregar valor al proyecto y cumplir con las restricciones operativas de Mina y Lixiviación.

Sep 29, 2023

By Herman Halupka

El presente texto describe los progresos alcanzados durante los cinco años de operación de dos hornos en la fabricación de pelets que desarrolló la mina Marcona a través del sistema de parrilla deslizante, patente Dravo-Lurg. Asimismo, se señala os procesos empleados para fabricar pelets como: molienda y concentración, filtración, bolas verdes, endurecimiento, y la preparación del concentrado de mineral de hierro para ser peletizado.

Jul 1, 1969

By Maybee Vásquez, Robert Santos, Marco Antonio Jáuregui

El estudio surge de la necesidad de ubicar los sectores más importantes para la realización de sondajes diamantinos, los cuales ayudarían a la confirmación y/o adición de nuevos recursos para el proyecto Chaquicocha Subterráneo. Tras analizar y detallar los riesgos identificados, así como los controles a tener en cuenta al realizar excavaciones mineras en ambientes con alto contenido de azufre nativo, se confirmó la viabilidad del proyecto, preservando la integridad de trabajadores y equipos.

Feb 28, 2020

A research project was commissioned by the Australian Coal Association Research Program (ACARP) to improve the understanding of tailgate strata mechanics and to provide a more rigorous engineering basis for tailgate support design. A deformation mechanism termed æskew roofÆ was defined which relates the regional influence of differential horizontal strata movement (shear) about longwall extraction to gateroads. Confirmation of the mechanism was achieved by field investigations which included measurement of the shear displacement along weak interfaces. Under geological and mining conditions where the skew roof mechanism operated, strata units were found to move progressively further towards the goaf with height into the roof. 3D numerical modelling was used to assess the major geotechnical factors controlling the mechanism and to determine appropriate support strategies within a æskew roofÆ environment including the role of cables versus standing supports. The skew mechanism is considered relevant to; all roadways in the vicinity of longwall extraction including the faceline itself, chain pillar design, and support design.

Jan 1, 2005

A major domestic aluminum producer raised its price for primary aluminum metal from 44 cents per pound to 48 cents per pound, effective August 5, 1976. Other major producers have increased their list prices by equivalent amounts COAL: The strike which began July 19 in southern West Virginia enlarged by early August to involve approximately 80,000 miners in nine States. As of August 4, the aggregated loss of production is estimated to be 5.8 million tons. Reportedly, at this time, the railroads which serve the struck areas are feeling the largest impact with coke plants and electric utilities relying on stocks which are generally high.

Jan 1, 1976

By B. Yu, N. Verbaan, A. Mezei

The recent 20 years witnessed a boom and bust in the nickel laterite industry. Most notoriously is the story of the first three Western Australian nickel laterite projects which all suffered major ramp-up issues. Many hard lessons were learned by the industry and it has been widely reported that the major contributing factors included insufficient testing as well as a limited understanding of the materials handling characteristics at the front-end stage of the flowsheet. This paper compares the current "race to production" in the REE industry to the laterite industry 20 years ago and addresses the fundamental question: ‘Have mining and exploration companies with rare earth projects learned from past lessons and are they doing sufficient and appropriate testwork to prevent failure’? The authors will provide the perspective of a commercial metallurgical laboratory that has gone through the laterite cycle and is active in the present REE cycle.

Jan 1, 2014

By Juan Ramírez L

El presente texto describe la aplicación del método de evaluación de volquetes en minería de cielo abierto, donde se considere las variables que influyen en la operación y la factiblidad del mísmo a posteriori. Para ello, se han desarrollado dos programas para calculadora HP-41CV, que dado su carácter voluble y poder de resolución, se adecúan a este tipo de trabajo. En este sentido, el cálculo del equipo de acarreo conlleva el cálculo del mineral a extraer, cálculo del stripping, proyección de avances, velocidades y ciclos y número de volquetes necesarios para movilizar el tonelaje proyectado.

Nov 8, 1984

By Maybee Vásquez, Robert Santos, Marco Jáuregui

El presente trabajo técnico nace de la necesidad que tenía Minera Yanacocha de ubicar los sectores más importantes para la realización de sondajes diamantinos, los cuales ayudarían a la confirmación o adición de nuevos recursos para el proyecto Chaquicocha Subterráneo, así como para establecer la línea base para operar la futura mina. Así, se analizan tanto los riesgos identificados como los controles a tener en cuenta durante el desarrollo de excavaciones mineras subterráneas en ambientes con alto contenido de azufre nativo y se confirma que es posible desarrollar excavaciones seguras en estos ambientes, a la vez que se establecen lineamientos generales para el desarrollo de este tipo de proyectos.

Sep 20, 2019

By Juan G. González Rojas

El presente estudio describe los resultados de exámenes sobre salud ocupacional en nueve asientos mineros del Perú, pertenecientes a los departamentos de Arequipa, Ayacucho, Cusco y Puno. El trabajo comprende dos partes: el ambiente ocupacional y el estado de salud del personal expuesto. Asi también se informa sobre la seguridad, aspectos de saneamiento básico de los campamentos (vivienda, suministro de agua, desagüe, etc.), las facilidades médicas y de bienestar al servicio del personal.

Aug 20, 1963

By R. Chryst, R. Kus

In the Integrated IT Systems proposed by Przedsie? biorstwo Robót Geologiczno-Wiertniczych—Geological and Drilling Company (PRGW) a network connects a database with all of the departments of a mining division. A key element thereof is the common graphics environment—Micro Station supplied by the firm, Bentley. PRGW’s SoftMine software and GMSI’s CadsMine that are used to design and schedule mining operate in this environment. The digital form of the design project facilitates the verification of information and the integration of technical solutions with SAP R/3 type financial—accounting systems. The system has been successfully implemented in the Brown Coal Mine in Poland.

Jan 1, 2003