Search Documents

By James J. Bryja

The production capabilities of today?s longwall systems have resulted in significant increases in retreat rates. This has in turn resulted in a heightened demand on panel development rates to assure that subsequent panels are completed in time to avoid a longwall production outage. As a means of reducing the pressure on the panel development activity a trend has developed towards the use of wider face lengths. The aim of using a wider face is to reduce the longwall retreat rate without sacrificing productivity and thereby reduce the pressure on increasing panel development rates. However, as the face width increases so too does the number of hydraulically powered roof supports that are required to control the longwall face roof. This increase in the number of units inherently translates into increases in the level of required maintenance relative to the multitude of mechanical and hydraulic components, and an increase in the time required for tear-down and installation time during the moves between panels. An obvious method of mitigating the maintenance and move-time impacts of wider faces is to employ the use of individual roof supports having a wider center-to-center spacing. This practice would serve to minimize the number of roof supports and maximize the time availability for longwall face production. With this target in mind a joint research project with DBT was initiated in 1998 to study the feasibility of using 2 m wide shields to replace the then standard 1.75 m wide shields. After four years of comprehensive work, the technical team from DBT and RAG American Coal completed the design and development of a prototype shield that would later become part of the world?s widest longwall face employing the use of shields having a spacing of +2 meters. The final spacing of the shields actually became 2.058m in order to match the standard pitch of the rack bar shearer haulage elements on the conveyor. In July 2002, the 2 m wide shields were successfully installed in LW-46 panel at RAG Cumberland mine in the U. S. The authors in this paper summarize the design considerations of and operational experiences with the world?s widest longwall face using +2 meter wide roof supports.

Jan 1, 2008

MR. D. HARRINGTON (U. S. Bureau of Mines) : I happen to be a member of the Safety Committee, and the men on the Committee, I believe are the ones who will find the most fault with the report; but I am absolutely not in accord with the last recommendation. (The use of the "Self-Rescuer.") I do not think it safe. I do not think you are always sure you are going to have a sufficient amount of oxygen; in fact I know there are occasions in mines when there is not enough oxygen to make a man safe in a gas mask or self rescuer. At one mine fire, workers using open oil and carbide lights experienced quick reversal of air which extinguished the lights and one of the workers having carbide light was overcome. It took about 45 minutes hard work with Sylvester method of artificial respiration to restore him to consciousness. Fortunately these men were working close to fresh air but had they been far from fresh air base and relying upon self-rescuers or gas masks they would undoubtedly have perished. I was at a mine fire in Wyoming. A bunch of men were working and the air turned on them, and if they hadn't oxygen breathing mine rescuing apparatus I think there would have been at least a half dozen men killed they would have been killed before you could say, "Jack Robinson." PRESIDENT PRYDE: I would like to ask if the self-rescuers are nut approved by the Bureau of Mines? MR. HARRINGTON: They are not; absolutely not.* Furthermore, the Bureau of Mines' Engineers have opportunities to go around in mines, and in mine cars as much as anybody else in the country, and I have in mind but one who is in the slightest degree in favor of allowing self-rescuers to go in a mine. MR. BEVAN: Mr. Chairman, I would like to ask the Safety Committee if it would be of any use to the fire boss traveling through the mine? PRESIDENT PRYDE: Mr. Chairman, I think we should finish up the discussion on the self-rescuer before we take up any other discussions.

Jan 1, 1924

By M .. K. Stewart

(Here follows descriptive movie.) CHAIRMAN KNOX: Thank you very much, Mr. Stewart, for this wonderful paper and picture. We are indebted to you. It certainly is the most interesting thing I have ever seen in connection with wire rope, except paying for it. I think there are a lot of questions that could be asked to bring out some points that we are not generally understanding of. Are there any questions at this time? I know Mr. Stewart will be glad to answer them. Come up to the front, Mr. Stewart. MR. STEWART: That's all right, thanks. CHAIRMAN KNOX: If there are any questions, let us have them. (No response.) Well, we will pass on to the next paper. CHAIRMAN KNOX: Our next paper will be "Self-Preservation, with Some Comments on Mechanical Loading," by Benedict Shubart and Charles Schloss.

Jan 1, 1935

The morning session opened at 9:00 a.m. and was presided over by Carlyle F. Gronning, Chairman, Industrial Commission, State of Utah, Salt Lake City, Utah. The first speaker was John A. Fagnant, Vice President-Sales, Kemmerer Coal Company, Frontier, Wyoming. Subject - "Open Pit Coal Mining, Western States." Mr. Fagnant is a graduate of Colorado School of Mines, 1937 Degree, Metalurgical Engineer His career in the mineral industry began at the Arthur Mill of Kennecott Copper Company. For nine years he was with Allis Chalmer Company in Milwaukee, Wisconsin as a Sales Engineer in the Mining Machinery Division. Following five years in private business, he joined The Kemmerer Coal Company as a special projects engineer specializing in coal carbonization. He was assigned the job of Sales Manager in 1968 and promoted to Vice President of Sales in 1970. Member of A.I.M.M.E.

Jan 1, 1975

The Morning Session of the Forty-Eighth Meeting of the Rocky. Mountain Coal Mining Institute convened in the Little Theater of the Broadmoor Hotel, Colorado Springs, Colorado, at 9:30 a.m., June 3, 1952, Howard B. Crandell, President, presiding. PRESIDENT CRANDELL: Gentlemen, the meeting will come to order, and I would like to introduce to you your Chairman of this meeting, Mr. John B. Hughes, General Manager of the Union" Pacific Coal Company, Rock Springs... (Applause) CHAIRMAN HUGHES: From the activities around last night, I supposed there would be quite a few that would be unable to attend this morning. I am sorry there are not more here because I am sure we have some interesting papers. First on the program this morning is, The Effect of Continuous Mining on Today's. Coal Industry by Mr. William Wearly, Vice President of the Joy Manufacturing Company. Mr. Wearly: (Applause)

Jan 1, 1952

By Andrew Franklin

The eightieth regular meeting and convention was called to order by the President, John T. Atkins, at 9:15 a.m. Monday, June 25, 1984 in the Colorado Ballroom of the Marriott's Mark Resort in Vail, Colorado. President Atkins welcomed the members and their guests to the convention and noted that the annual business meeting would be held Tuesday afternoon at 2:00 p.m. in the same room. A convention update was made by the Conven¬tion Liaison Officer, Loren V. Linville. This was followed with a program report by the Program Chairman, Doug Ingram. The chair then called on Clifford Barrett, Upper Colorado Regional Director of the Bureau of Rec¬lamation of the United States Department of the Interior. He presented the Bureau's Citizen Award to RMCMI former president Ira E. McKeever for his outstanding contributions to the joint private/ Federal effort and the open planning process for AQUATRAIN. According to Barrett, "from 1981 to early 1984, McKeever led private industry work in the AQUATRAIN project, a proposal for a 1,400 mile long pipeline system. AQUATRAIN was conceived as a possible alternative to solve the government's problem of rising salinity levels in the Colorado river, as well as the private sector's need for a more economical coal transport method. The Citizen Award cites McKeever's efforts in developing a model for future cooperative ventures between government and industry that can benefit the nation." Following this presentation, the formal program of the 80th meeting and convention began with the president, John Atkins, introducing the convention kickoff speaker, Andrew Franklin, President of Nerco Mining Co., Inc., followed by the convention keynote speaker, Dr. Margaret N. Maxey of the University of Texas. These speeches are printed in this Proceedings together with those of all other convention speakers. I'm Andrew Franklin, President of Nerco Min¬ing Company, and I'm delighted to be here to kick off the annual convention of the Rocky Mountain Coal Mining Institute. This has always been a very special convention in my eyes and I'm sure this year's will be no exception. I am also here to share my thoughts on the western coal industry and how we're all affected - for good and bad - by public policy decisions. Although the title of my talk is "Western Coal: An Industry Under Siege," I believe a more accurate title might be "Western Coal: The Pit and The Pendulum," because of the wide swings in public policy and coal development in the past 15 years which have cut a zigzag path for growth over this period. As one of the nation's largest coal producers, Nerco is well aware of the problems facing western coal production. Nerco Mining Company is the western coal mining subsidiary of Nerco Inc. We have been "in coal" for more than 25 years through our parent company, Pacific Power & Light. To state my conclusion at the outset, I feel it's extremely important that consistency and common sense should guide our national policy for the development of valuable energy resources. In particu¬lar, we must reduce the wide swings in government policy and activities which have affected energy development. In short, we must decide what kind of game we're playing so that the "players" and the "referees" can keep their eyes on the "ball." Business today faces two main types of uncertainty market uncertainty and public policy uncertainty. As businessmen, we expect and are used to facing the familiar challenges and uncertainties of the market in which we operate. Over the past 10 years, the market has appeared to be bullish on coal. But the facts make our future less rosy. Last year, western coal producers faced over 50 million

Jan 1, 1984

By E. H. McCleary

The Alamo Mine The Alamo mine is located about seventeen miles northwest of Walsenburg, Colorado, on the Loma Branch of the Denver and Rio Grande Western railroad, in the foothills of the Black Mountains of Huerfano County. Prospecting Mr. W. B. Lewis of New York City, president of the Oakdale Coal Company and also president of the Alamo Coal Company first became interested in this property in 1920. After all natural features of the surface had been carefully examined by Mr. Lewis, he was convinced that the property was underlaid with coal seams. Plans for prospect drilling were made at once and this drilling was started late in 1921. In all, eight drill holes were put down to the Trinidad sandstone which underlies the coal measures in this field. These drill holes in general, showed very satisfactory results. Two workable coal seams were penetrated by most of these drill holes, the upper seam being six and one half feet thick and the lower seam having a thickness of ten and one-half feet. The two seams are separated by forty feet of sandstone and shale. Analyses of the seams proved each to be of a very high grade bituminous coal possessing hardness much above other bituminous coals, and having very bright lustrous appearance. Tests of more than a year's duration proved the coal to store excellently in closed bins and also in open bins where coal is exposed to elements. The drill hole data further showed the coal seams to pitch more than fifty per cent or about twenty-six and one-half degrees. The pitch direction being approximately South 65 degrees East. The drill holes further proved the coal seams did not outcrop at any point on the property, and no evidence of coal outcrop has been found in near vicinity. A splitting and pinching out of seams was found to occur some two hundred to three hundred feet of theoretical outcrop at very Western boundary of property. The most Easterly or No. 6 drill hole has a depth of eight hundred fifty feet to floor of lower coal seam. The Trinidad sandstone was found to be immediately under the lower coal seam, and the Pierre shales lying under this sandstone. Plans for Development and Sinking Having obtained sufficient data, plans for development of the property were carefully made sometime in advance of the actual opening of the mine. Every condition was carefully studied and the maximum production of clean and well prepared coal at as low a cost as possible during the entire life of mine was kept uppermost in the minds of all. The life of mine is estimated at approximately fifty years. It was decided to open up the lower and thicker seam first, and due to the pitch and other conditions a slope opening was decided upon for its extraction. The pitch of the coal having been found to be from fifty to sixty per cent or twenty-six to thirty degrees, the plan of driving the slope directly down the pitch of seam was eliminated and a plan that would give a more economical grade was decided upon. To obtain a lesser grade, a point several hundred feet west of-and at a less elevation than the theoretical outcrop of coal seam was selected for the slope opening. (Fig. 18.) To have driven directly down the pitch of coal seam would also have given the slope an uneven grade as the pitch of coal seam varied as it approached the crop. From this point of opening, the slope was to be driven on a thirty-one per cent, or' about seventeen degree pitch to intersect coal seam in No. 6 drill hole, a distance through the Pierre shales and Trinidad sandstone of two thousand five hundred fifty feet, the slope to be driven practically due East

Jan 1, 1925

Past President Ralph Moore opended the meeting at 9:30 a.m. He thanked all the committees for their part in making the 1977 meeting the success is was. He then turned the meeting over to President-elect, Shirl McArthur. President McArthur called on the Auditing Committee to present its report. Gabe Ishley, Chairman, read the report and asked that it be approved. A motion was made, seconded and carried. Loren Linville gave his report on registration and new members which figures are in the Monday a.m. business meeting of the Proceedings. The Resolutions Committee was asked to give its report. William Bear, Chairman, submitted the following: (1) RESOLVED: WHEREAS, in the year since the last convention of The Rocky Mountain Coal Mining Institute, the Institute and the coal mining industry have suffered the loss through death of the services of: John A. Garcia John B. Huehes H. B. Lindeman Richard B. Miller Charles Pliley Wilford Ruff James Westfield

Jan 1, 1977

By G. A. Knox

Mr. Chairman and Gentlemen: The subject assigned to me would cover a great many pages if it were gone into thoroughly. Therefore. I have just touched on a few of the most important points. I think that everyone engaged in the production of commercial coal understands all about its preparation, but I will set forth my views as to how I believe it is best accomplished. In order to produce the best prepared coal, your first attention should be to the miner at the working face. The most careful system of blasting should be adopted to avoid heavy charging of holes which results in the shattering of the coal. The lump, or any other screened sizes that may be screened from coal that has been improperly shot, are subject to greater degradation in transportation and handling, as well as reducing screened sizes, which results in dissatisfied customers in the first case, and lower realization in the latter.

Jan 1, 1928

CHAIRMAN I. N. BAYLESS: Will you come to order, gentlemen? They told me that you had a very interesting meeting yesterday and a good time last night. Our program is rather long this morning, and I am not going to take up any of your time, as we got started a little late. I will ask Mr. Marchant to make a few announcements. (Announcements.) SECRETARY MARCHANT: I just noticed in this morning's paper a rather serious accident at Hobbs, New Mexico, in which George Kaseman, a former President of the Institute, and a loyal member ever since its organization, was killed. I think that this meeting should go on record and prepare a resolution of condolence, etc., and with your per- mission we will have the Committee on Resolutions do that. I assume that will be all right. CHAIRMAN BAYLESS: Our first paper and discussion this morning will be Education of the Miner, by Thomas Allen, Chief Coal Mine Inspector of Colorado. Mr. Allen.

Jan 1, 1938

By Geo. A. Brown

This paper was written from conditions existing in the Cumberland Mines of The Union Pacific Coal Co., with my impressions and cause of same. These mines are located on a branch line of the 0. S. L. R. R., about sixteen miles south of Kemmerer, Wyoming. The mines are the property of The Union Pacific Coal Company with headquarters at Rock Springs, Wyo. There are two mines, No. 1 and No. 2, located about two miles apart in a seam of coal averaging about 16 feet thick which is split with a parting of rock from 4 feet to G feet from the bottom, averaging from 4 inches to 5 feet thick, mostly of soft fire clay, with an average pitch of 21 degrees to the west. The lower coal below the fire clay band being of a soft nature, much softer than the coal above it. The cover or roof next to the coal is of a massive sandstone formation from 4 feet to 60 feet thick while the floor of the seam is of a soft fire clay as far down as has been prospected. These mines are also of a dry and dusty nature, they generate lots of fire damp and are subject to fires from numerous causes. These mines were opened up in 1900 with five openings each, Main Slope, North and South Manways and North and South Aircourses driven parallel directly on the pitch of the seam which is fairly regular, entries being turned North and South at right angles off the slope about 300 feet apart. The entries were driven double 10 feet wide with chain pillars from 20 feet to 30 feet thick. The main entries are used for haulage and main intake, back entries for return aircourses. Rooms are turned on 50-foot centers and 20 feet wide, directly on the pitch Galvanized sheet iron chutes are used in the rooms. The slopes were driven down in No. 1 mine about 4,000 feet, in No. 2 mine about 5,000 feet where the cover would be about 1,400 feet in No. 1 mine and about 1,700 feet in No. 2 mine approximately. When a point about 2,000 feet on the slope had been reached with cover, 600 or 700 feet squeezing became noticeable on the entries and room pillars with slight bumps which extended clear to the upper entries of the mines and continued to get worse as the mines got deeper and with more cover as no pillars had been removed at this time. It should be stated here that faulty ground was found on the south side of No. 2 mine and on the north side of No. 1 mine, in some places looking like a fault of a down throw, some places like a want and other places like an erosion. The latter theory seems to be correct from prospecting and drilling. The mining of entries and rooms became more difficult with more squeeze and bumps of increased pressure which closed entries and aircourses and finally caused the lower workings of the mine to be abandoned. It was then decided to open up the entries from the 6th up, or approximately half way up the slope. The opening of these entries was started with the intention of extracting pillar coal but considerable danger was met with for the entries .were squeezed tight and when they were disturbed, bumps and squeeze conditions had to be contended with, also gas and fires due to the continued grind on the pillars due to overhead pressure bringing on friction which caused innumerable fires to start in the bottom coal. Bumps being so extensive at times as to close up aircourses for 500 or 600 feet, also discharge timber, coal and rock from the rib of slope and entries for hundreds of feet, dislodging tracks and throwing mine cars around just as if an explosion had taken place, filling places with gas and throwing dust into the atmosphere so that you could cut it with a knife. It became necessary to discontinue the use of black powder and naked lights entirely as a safety precaution. Permissible Powder Monobel No. 5 and Wico Electric Safety Lamps were installed. All coal was shot off the solid whenever it was necessary to shoot. ' In opening up these entries it was found that practically all of the weight was centered on room pillars up to the first crosscut chain pillars and barrier pillars between top of rooms of entry below and the one above which averaged 30 feet thick and in all practically 120 feet of ground. The rooms were mostly open from the first crosscut up to the face which showed that the points mentioned had taken the weight. It was found impossible in some of these entries to drive double entries again as the bumps and squeeze made it impossible to maintain them. This made ventilation quite a problem, small booster fans and flexoid tubing being used for ventilation until one entry could be connected with the one above which has solved most of our ventilation problems so far.

Jan 1, 1924

[Following is the Financial Report of the Treasurer from May 22, 1981 to May 21, 1982: RECEIPTS Cash on hand May 22, 1981 $21,815.81 Dues $ 6,800.00 Registrations 19,250.00 Banquet, luncheons, Buffet and Steak Fry Tickets $44,335.00 Less adjustment 831.68 43,503.32 Bank Interest and Certificate Interest 7,747.49 77,300.81 $99,116.62 DISBURSEMENTS Convention Expense - 1981 48,600.37 Convention Expense - 1982 2,146.65 Stamps & Stamped Envelopes 1,251.48 Stationery & Office Expense 1,259.22 Salary of Secretary-Treasurer 5,040.18 Social Security & Employment Tax 772.20 Proceedings $ 9,703.42 Less Advertising 2,290.00 7,413.42 Certificate Purchase 10,000.00 76,483.52 Cash on hand May 21, 1982 22,633.10 United Bank of Denver Savings Account 15,000.00 Money Market Certificates 40,000.00 Total Assets $77,633.10 AUGUSTA WHITESIDE Secretary-Treasurer Approved by Auditing Committee: Paul Hronich, Chairman Robert Anderson Allen E. Duncan Donald P. Huckeby Richard C. Mullins June 29, 1982]

Jan 1, 1982

The 70th Regular Meeting of the Rocky Mountain Coal Mining Institute convened at the Steamboat Village Inn, Steamboat Springs, Colorado, and was in session at 10:00 a.m. The session was called to order by Past President O. F. Lewis. Consultant, Colowyo Coal Co., Denver, Colorado. Mr. Lewis introduced President A. F. Geiger, Manager, Navajo Mine, Utah International, Inc., Fruitland, New Mexico. Following are Mr. Lewis' remarks: Ladies and gentlemen, members of the institute, guests and friends, welcome to Steamboat Springs and the 70th meeting of the Rocky Mountain Coal Mining Institute. From all appearances this is our largest meeting and should be the most successful. When I last spoke to you I was President of Colowyo Coal Company and the Rocky Mountain Coal Institute but that has changed. Colowyo Coal Company was acquired last Dec. by W. R. Grace & Co. and operates as Colowyo Coal Company, Division of W. R. Grace & Co. I am confident these people will make a worthwhile contribution to the coal Industry.

Jan 1, 1974

By C. A. Allen

When the writers were asked to prepare a paper on this subject for this meeting of the Institute there was some question in our minds as to what to say that would be of interest to the members. You all know that Utah has some wonderful seams of good coal, on which have been opened some of the most modern mines in the United States, and that her coal operators have been putting forth many efforts to reduce losses due to accidents as well as disease. While I believe that the physical condition of Utah's mines is as good as in any other state we are not unaware of the fact that a great deal can still be done and we are always willing to frankly discuss the accident situation in the state. Dr. Murray has assembled some interesting figures showing the monetary loss due to accidents and disease which I will will proceed to give you to show the necessity of continued efforts in welfare work regardless of humane considerations.

Jan 1, 1922

The 64th Regular Meeting of the Rocky Mountain Coal Mining Institute convened at Jackson Lake Lodge, Grand Teton National Park, Wyoming, and was in session at 10:00 a.m. The meeting was called to order by Past President .Tames Westfield. He introduced Mr. Raymond C. Lillie, President of Grand Teton Lodge Company, who welcomed the members to Jackson Lake Lodge. Mr. Lillie stated he had been with the organization since the Lodge was built. They had a snowstorm the day before our meeting so stated it was perfect weather for coal miners. Mr. Westfield introduced President Joe T. Taylor, Superintendent, York Canyon Mine, Kaiser Steel Corporation, Raton, New Mexico. Mr. Taylor was born in Miami, Florida. Attended the Colorado School of Mines and graduated in 1952. He was associated with Sunnyside Operations of Kaiser Steel Corporation in Utah until 1962. Was then transferred to the Koehler Mine in Raton, New Mexico, as Superintendent, and had charge of opening the new mine, York Canyon, and at the present time is in charge of Kaiser operations there.

Jan 1, 1968

The Wednesday morning session was called to order by President Lewis at 9:00 am, He called on Bob Wilson to conduct the business meeting. In the absence of any of the Auditing Committee, the treasurer's report, which had previously been examined by them was read. He asked for a motion of approval. It was made, granted and approved. The Resolution Committee was called on to make its report. Mr. Shirl McArthur read the following report: (1) "WHEREAS, the Pneumoconiosis or Black Lung provisions of the Federal Coal Mine Health and Safety Act which have been construed and administered largely as a welfare program rather than as just compensation for occupational disease has resulted in enormous expenditures and commitments from the Federal Treasury, WHEREAS, the imposition of the full cost of future welfare oriented black lung awards on coal operators without regard to workmen's compensation standards and without due process in granting benefits is grossly unfair and discriminatory to the coal operator and places an undue burden on the present cost of coal,

Jan 1, 1973

D. HARRINGTON: Owing to lack of funds, the United States Bureau of Mines have made no experiments in the Bruceton mines in the use of mudite. MR. McAULIFFE: I doubt that mudite cam be delivered at fifty cents a ton and that a mile of heading can be treated with mudite for ten dollars. You could not dig a ton of sand out of a sand hank for that money. L. C. CLARE: The tram road leading to Wattis mine crosses a shale bed and it is easy to screen the shale through a %-inch sieve and load it into a mine car. W. J. REID: A slow trip passing through a mudited entry will dislodge practically no dust, a rapid trip will make air disturbance enough to coat the cars with fine dust. MR. PRYDE: We have used mudite on stoppings around a fire in Reliance and for two months thought they were getting good results, but the fire was found to be drawing air and to be spreading. This mudite was smeared over the stoppings with a trowel. After this apparently failed we used dry adobe.

Jan 1, 1925

By Hugh McLeod

To make the statement that coal mine operation has been entirely revolutionized within the last ten years is a mild statement. This has been entirely due, of course, to the almost universal introduction of mechanical loading in coal mines. Under the old system of contract loading too much was left to the individual miner's judgment and willingness to do the right thing. Each miner regarded the place in which he worked as "his place," and depending upon the judgment and ability of the miner, conditions as found in these places largely reflected that man's individuality or personality. Many men kept their places well timbered and in such condition that they were not only able to load their turn but were able to take advantage of any surplus cars that might be available in their particular entry. These men were often regarded as "coal hogs." However, these men's places were usually found to be well timbered and well maintained. Supervision under this old system in a strict sense of the word amounted to casual visits to the man's working place by the foreman or his assistant once each day as required by law.

Jan 1, 1938

The 69th Regular Meeting of the Rocky Mountain Coal Mining Institute convened in Manor Vail Lodge, Vail, Colorado, and was in session at 10:00 a.m. The meeting was called to order by Past President Joseph E. Ward, former District Manager, Denver Office, Coal Division, Joy Manufacturing Co. and now retired. Mr. Ward, after reading a brief biography of President O. F. "Os" Lewis, introduced him to the assembly. Biographical sketch read as follows: Mr. Lewis is President, General Manager, and a Director of Colowyo Coal Company. "Os" was born in Reno, Nevada. He attended the University of Utah at Salt Lake City, Utah, and later the Denver University in Denver, Colorado. His career in the Western Coal Industry started back in 1923 when he was employed by the Central Coal and Coke Company of Salt Lake City, Utah, as a clerk, then chief clerk and as a traveling sales representative for a period of 13 years. Later, in 1936, when that company was acquired by an affiliated company of Harris Coal Company, he was transferred to Denver as Assistant Sales Manager, Purchasing Agent and later as Executive Assistant to the President.

Jan 1, 1973

By J. J. Wilson

To explain in detail the manufacture of seamless pipe and tubes is something I venture to say that has never been done to a point entirely satisfactory. The manufacture of seamless tubes dates back to 1885, when Mannesmann Brothers invented the roll-piercing mill. Ten years later R. C. Stiefel invented the disc-piercer, which first came into general use in this country. At the present time the Mannesmann roll and the Stiefel disc-piercers are used, the Mannesmann rolls particularly for the larger size billets. Sizes produced at first were relatively small and the product was cold drawn to provide a smooth surface. The early uses of seamless material were chiefly for mechanical purposes, such as boiler tubes and bicycle tubing, and the latter for some years taking the heaviest tonnage. Improvements in the hot process were gradually made; the early Pilger type rolls were largely superseded by the two-high rolling mill for rolling out the tube after being pierced, the reeling machine for diagonal rolling, the sizing mill for giving exact outside diameter, and finally the sinking mill for reducing larger diameter tubes to smaller diameters.

Jan 1, 1932