Search Documents

By George Shou

"The paper point out about economics of thickened tailings transportation. In this sense, the optimal concentration is determined based on the balance between the incremental costs of thickening and transportation and theincremental environmental benefits. A detailed feasibility study is essential for financial success of a tailings project. Hydraulics modeling is the key to estimate the transportation cost curve. "

Jul 31, 2003

By Thomas F. Kerr

The La Quinua mill at the Yanacocha mine in Peru has a thickened tailings storage facility that is contained entirely within an active heap leach pad. In this respect, it is unique and unprecedented in the mining industry and provides the operator, Minera Yanacocha S.R.L. (MYRSL), with certain cost, land-use and closure efficiencies. The combined design requires that the leach ore embankments retaining the tailings provide the same high level of stability and security required of major tailings dams. Contrary to standard tailings dam construction, the leach ore in these embankments is placed in thick, uncompacted lifts so that they maintain adequate permeability for leaching. The resultant loose structure makes static and dynamic liquefaction a critical issue, and the key design principle for avoiding a liquefaction related failure is to keep the ore that is saturated or very near saturated when under leach well removed from the outer faces of the embankments and contained behind large unsaturated structural shells.

Sep 14, 2009

By J. Hantelmann

The Yanaquihua gold-bearing vein-fault deposit is associated with a sinistral strike-slip fault system, hosted within granite to granodiorite of the Tiabaya Super Unit of the Coastal batholith. The deposit is located near the northwest striking Cincha-Lluta-Incapuquio (System 11) regional fault system . Mineralization exhibits vertical trends and is primarily controlled by sub-vertical vein-fault structures. Mineralization includes variably abundant quartz, clay minerals, pyrite, calcite.

May 1, 2008

By Roger Henning

Although flotation is widely used throughout the minerals industry, it is a relatively inefficient process. The economic benefits of improved operation are considerable. A multivariable level stabilising system has been developed to reduce the amount of fluctuation in flotation levels. It has been shown on several plants that the better level control leads to improved metallurgical performance. A level measurement based on conductivity is also described. The device provides some insight into the behaviour of the froth.

May 25, 1998

By Enrique Rubio

Mine planning is the discipline of mining engineering that transforms geological resources into the best productive business for the owner. The production schedule is the best reflection of the company's business plan, which reflects the strategic, tactical and operational objectives to reach the defined production targets subject to the restrictions imposed by the mineral resource, by access to capital, medium environmental, market, technology and others. Traditionally the process of mine planning has been carried out through multiple steps generally disjointed and not with a clear connection with the ultimate goal that is to carry out a mining business.

Sep 1, 2017

By Timo Toma

Hitherto flotation machines have by and large been operated and coaxed to best performance through the human endowments of sight and problem solving ability. A new device that measures accurately distinct froth characteristics on-line is now revealing fresh insights into the complexity of the froth removal, at the same time showing promise as a practical tool for the automation of stable control as well as flotation machine and flotation circuit performance optimization. The FrothMasterTM is introduced. Actual plant results are shown and discussed. A functional and practical leading edge solution to flotation machine control automation is presented.

Aug 25, 2002

By B. Whistler

The Alpala porphyry copper-gold deposit is a recent discovery located in the Imbabura Province of northwestern Ecuador. The drilling of seventeen diamond core holes over a 900 m by 400 m area has defined a northwesterly-trending, steeply northeast-dipping dike-stock complex of diorite to quartz diorite that exceeds 1300 m in height. This intrusive complex is hosted by a sequence of andesitic volcaniclastic rocks and lavas. The host-rocks are interpreted to be part of the Paleocene to Late Eocene Macuchi Formation (BGS-CODIGEM, 1997; Cruz, 2007). The best drill intercept to date is 1312 m at 0.67 % Cu and 0.63 g/t Au from 128 m depth in CSD-15-012, which includes 576 m at 1.03 % Cu and 1.19 g/t Au.

May 1, 2008

By Pierre Shields, Luiggi Sassarini, Richard Zandstra, Thomas Li

The intent of this paper is to demystify the mythology which often confront mine owners and engineers faced with this dubious question “Is it better to develop or continue a ramp or make a vertical shaft to access the new ore body of interest?” trough out measuring risk and return using probabilistic analysis and unhidden cost the affect long term decision such ventilation.

Sep 1, 2017

By Luis Yacher

Proccesing plants currently have sophisticated regulation and control systems and there also systems of managment of the quality and laboratory variables, for the mine-plant transport managment, mineralogical extraction, characterization, maintenance managment were desgined to support specific operational business functions: to operate, maintain, control quality, manage the fleet, etc. The vision of systems dedicated to supporting specific business functions contradicts what is nowadays an integrated business operation, esenctially multidisciplinary and it which the managment and supervision process require access to heterogeneus information sources regarding their regarding their origin and managment system. The consecuence of ongoing pressure for operational excellence is the need of more "fine-lunning"of the processes must be adressed in a synchronized way. Hence, the need arises of restating the issue of operation and related information, for which a new conceptual and techonological focus is proposed aimed at the objetive of operational excellence.

Sep 19, 2006

By Victor Tenorio

At the present time, the mineral resources in the majority of underground mines are assessed and reported within a deterministic scenario. Irrespective of the techniques utilized for the estimation, the uncertainty in the reporting of resources is limited to their classification in categories such as Measured, Indicated and Inferred, according to a qualitative appreciation that depends on the abundance and quality of geologic information and sampling. Tonnages and grades reported within each category are treated as of fixed or variable precision depending on their classification; nevertheless, this degree of precision is not quantified, which makes it difficult for mine planning and can seriously affect the decisions that are taken on the resources of a deposit. The uncertainty in the resources comes from the lack of adequate geological information and grades, but this lack of information is very difficult to improve or supplement since the information-versus-cost curve increases exponentially

Sep 19, 2006

By Félix García

The Yanacocha Operation is an open pit gold mining operation located in mountainous terrain in Northern Perú. Given constraints imposed by the topography and the permitted boundaries, the efficient use of space is a priority for the Operation. Gold extraction from some ore types involves leaching, and the construction of heap leach facilities (HLF). The construction of HLF over a waste rock facility (WRF) is an example of a design driven by the need to use space efficiently. Liner grades that promote controlled drainage of leach solution, and drainage infrastructure are essential in HLF design. With this in mind, accounting for settlements in the waste rock and the native soils that form the WRF foundation were particularly important for this application. The facility continues to function in accordance with the design. This concept permitted important cost savings, and provided useful HLF capacity for the Yanacocha Operation.

Oct 21, 2015

By Reinhold A. Errath

The Antamina Concentrator plant was one of the first plants in the world, where about 60 Megawatt only in Milling Power was installed. As a consecuence of the use of Gearless Mill Drives the speed of the mills is adjustable, which allows the operators react to the different ore grades correspondingly, in order to get the best results in terms of milling efficiency. In this sense, this paper describe the basic idea of a Gearless Mill Drive, the construction of it, the manufacturing facilities, the transport, the installation and the function in detail. It gave enough insights to understand why Gearless Mill Drives are so reliable and used as an adjustable speed drive, why it counts with the highest efficiency of all drive systems.But it did describe as well the overload capabilities, the reaction to the network, the reason why the maintenance of the drive system is proven as a minor issue, and finally it was self- explaining why the Gearless Mill Drive is called a working horse.

Sep 12, 2005

By Carl Verholek

Remote control systems for industrial applications have advanced since the early 20 years, increasing its capabilities by utilizing new electronic technology. This electronic “tool” has benefited many mining operations, making them a safer place to work and at the same time more productive. Almost any operation that presently uses a man at the controls of the machine or using a wired tether control, is a candidate for improvement by the addition of a remote control. Remote control systems add safety, reliability and productivity at a cost that is usually recovered in mere months after installation.

May 25, 1998

By Benito Perez

Newmont Akyem mine in Ghana is committed with continuous improving results. A new environment where the price varies rapidly requires of better understanding of the deposits and the gold contained in the ore. This better understanding allows the mine planners to quick adjust and fast response to economic changes for gold price. Newmont Akyem Mine has approximately 9.4 million tons of ore in the stockpiles. Mine planers are still using average grade in all stockpiles to do a mine plan. The re-handled material is blended with the prime material coming from the mine.

Sep 1, 2017

By Gawen Jenkin

The extraction of metals from ores is often an energy-intensive process, requiring either smelting or leaching at high temperature, or the use of large quantities of strong acids or bases that require energy to produce. These processes often produce wastes, in gaseous, liquid or solid form, which require treatment before they can be safely disposed, and this waste treatment requires further energy. Thus there is a need to develop more energy-efficient and environmentally-compatible methods. In this sense, the paper point out that ionic liquids are one such method, and that they can be used to selectively dissolve and recover native gold and tellurium, sulphides and tellurides.

Oct 21, 2015

By Mafalda Arias

The role of our industry is essential to future societal needs and to set the foundation for a better world, it?s important to built trust and relationships inside your global team, within communities and together with stakeholders. The objective of this paper is to raise awareness of the importance of including “culture” as one of the four pillars of sustainability and to highlight the disjointed nature of the existing concept of sustainability and the goal of that concept. In other words, the conflicting propositions between the western beliefs that set the foundation of the sustainability concept and the eastern beliefs that aims to have sustainability as an end result. The incorporation of “culture” aims to find a balance, which unites these opposite perspectives to result in a more harmonious solution for society.

Sep 12, 2011

By Joseph W. Ruetz

The paper describes the San Nicolas deposit, México. San Nicolás deposit is the most important VMS deposit discovered in Mexico to date, and a major deposit on a global scale. The discovery of San Nicolas resulted from the early recognition of VMS mineralization in a region not known for this style of mineralization, and the flexible use of appropriate exploration technology.

Apr 24, 2001

By Sabina Strmić, Fredrik Sahlström, Siv Hjorth et al

Cobalt is critical for the green energy transition, yet the mineralogical distribution and the mechanisms of concentration of Co in different types of hydrothermal ore deposits remain poorly constrained. Here we document ore mineral assemblages from the active Fåvne and Loki’s Castle seafloor massive sulfide deposits located along the Mohns Ridge in the Norwegian Sea, and determine their whole-rock and mineral chemical compositions with a special emphasis on Co.

May 10, 2023

By Eric B. Braun

"The paper describes Rio Blanco like a virgin porphyry copper discovery, located in Perú along the Ecuador border at the north end of a belt of copper systems that includes porphyry Cu-Mo, porphyry Cu-Au and highsulfidation types.Rio Blanco is a porphyry Cu-Mo system containing low Au and As. The presence of andalusite, diaspore and pyrophyllite, intense QSP alteration and absence of potassic alteration indicate a shallow level oferosional exposure."

Apr 26, 1999

By Richard M. Tosdal

Much work in the recent years has focused on identifying the characteristics of igneous rocks associated with porphyry Cu deposit, and thus to identify potential fertility indices that can be used in an exploration context. These avenues include a combination of lithogeochemistry (e.g. Sr/Y ratios) and mineral (e.g. zircon and apatite) trace element geochemistry. Understanding what these fertility indices tell the geologist about magmatic processes is important to their application in a successful exploration program.

May 1, 2008