Search Documents

East Nelson and Marlborough, in the northeast of the South Island, contain a wide variety of metallic minerals, including gold, silver, copper, chromite, antimony and scheelite, but no sustained metallic mining industry has evolved. Gold was the most sought-after mineral during the first century of European settlement and numerous discoveries were made but these failed to live up to expectations. While traces of gold are widespread in east Nelson, including in quartz veins in Nelson City, no payable deposits were found. In Marlborough the probability of a gold discovery had initially seemed remote but all this changed with the finding of rich deposits in the bed of the Wakamarina River in 1864, which provided a much-needed boost to the provincial economy. However, the decline of gold mining in Marlborough began virtually as soon as it had commenced. Extensive floods in 1865 hastened the exodus of miners to the profitable new fields of the West Coast.

Jan 1, 1993

By P Walton, L W. Armstrong, D P. Blair

Sydney is the capital city of NSW and has a population of approximately four million people. Eighty per cent of the cityÆs water is supplied by Warragamba Dam, which is situated some 75 kilometres south west of the city centre. A risk assessment was carried out on the dam and future predictions of water flows into the catchment area showed that there was a risk of a one in 700-year flood not being contained by the dam. The predicted loss of life and property damage warranted the construction of an auxiliary spillway on the eastern side of the existing dam to cater for any uncontrollable influx of water. A test blasting program was instigated and the blasting parameters were established that would lead to routine production blasting of the sandstone rock making it more cost effective to excavate. Blast induced vibrations were a concern to the owners and the dam wall and ancillary infrastructure was instrumented with sensitive vibration monitoring equipment during the test blasting phase of the operation. Once the blasting parameters were established from the testing program production blasting was carried out on a daily basis to maintain æstockpileÆ of fragmented ground for the excavation equipment. Blast vibration models were developed to predict vibration levels for more sensitive areas of the dam to give the operators more confidence in their operations. The blast induced vibration levels recorded did not cause any structural damage to the dam wall and the waveform frequencies of the blasting operation were much higher than that experienced during a recent earthquake. The integrity of the SCAÆs assets were at no time jeopardised.

Jan 1, 2001

By A Buckingham, R M. Hancock

The underground Sunrise Dam gold mine commenced in October 2003 to extract ore from a series of orebodies with various dips, widths, and ore grades over a strike length of 1.5 km. To successfully operate flat stopes it was identified that a means to extract ore left behind after blasting in stopes with dips ranging from 15 to 40 degrees was needed. Various options were available, which included a bulk water cannon, hand held high-pressure water jet, remote controlled small dozer, several mini excavators and finally a specialised remote controlled excavator from the demolition industry. Trials were commenced for the bulk water cannon option in 2006 that proved that the concept worked, however, the system was too cumbersome to set up for use in cycle with production. Hand washing down using mine (low pressure) water with a two-inch bullhose proved of limited value. The small, one metre high remote controlled dozer as used in South Africa was reviewed, but the steepness of most of the stopes precluded this machine. The hand held high-pressure water jet option is still being investigated; with safety factors still being addressed. Several mini excavators were trialled to clean out the flat stopes with generally poor results, the machines being either too large to fit in the drives and pull ore down or too small with too short reach to effectively and efficiently pull ore out of the stope. In early 2007 a Brokk 330 remote controlled excavator was trialled on site with the low profile of the machine and unique arm configuration proving an effective tool for pulling ore from the footwall of short, flat stopes. A Brokk 330 remote controlled excavator was purchased in late 2007 and is currently in operation.

Jan 1, 2008

S. A. Tomich (Consulting Geologist, Perth) : I would like to commend Mr. Haycraft on his presentation on the economic geology of the North End of Kalgoorlie. This is an intriguing area which is in the Kalgoorlie field but not of it, inasmuch as it is separated spatially from the main Golden Mile by the Golden Pike Fault. Mr. Haycraft has stressed the differences-the mineralogical and structural differences of economic significance between the two areas.I would like to ask whether he is satisfied that the lithological sequence in the North End is the duplicate of that in the main Golden Mile area irrespective of the postulated effects of erosion, and more specifically whether there is any chance that the quartz-dolerite-greenstone of the North End may be in any way dissimilar from the quartz-dolerite-greenstoneof the Golden Mile which is tellurude bearing.J. A. Haycraft: In relating the quartz-dolerite in the Hannan's North-Mount Charlotte area back to the Golden Mile, we find some quite close similarities. Although the rocks are similar they are not necessarily one and the same.At Mount Charlotte we have three varieties of dolerite- a coarse-grained gabbroic dolerite on the eastern side of the orebody, the host rock medium grained and on the western side, a fine grained dolerite. Further west we have an amphibolitic variety of quartz dolerite.Recent drilling south of the Golden Pike fault on the Enterprise No. 20 level had indicated a remarkably similar sequence of rocks. We drilled west through a wide section of medium grained rocks into a fine grained rock and then into amphibolitic quartz dolerite before intersecting the Golden Pike fault. Williamstown dolerite was located west...

Jan 1, 1965

During the past eight years a vigorous drilling campaign resulted in large increases in the reserves of both copper and silver-lead-zinc ores.As a result the Company initiated an increased production programme.Some major capital works have been completed, others are in progress and more are needed to achieve the proposed daily throughput of 14,400 tons. The increased ore potential justified a copper refinery which has been constructed at Townsville. The increased production rate achieved to date, combined with improved techniques and greater mechanization, is assisting the Company to combat the general inflationary trends caused by increased costs for labour and materials.INTRODUCTION"Today we are armed with better weapons in our fight for lowered costs and greater efficiency, but we must not flag in our efforts to improve." Such was the resolution expressed by Mr. K. B. Gross, then General Manager of the Company, in his review lecture delivered to the First Ordinary Meeting of The Australasian Institute of Mining and Metallurgy at Mount Isa on 18th August, 1952. This present review of the period 1952 to 1960 records our efforts to fulfil this resolution. At the th:ne of Mr. Gross's statement,copper production was commencing in earnest. Although the importance of Mount Isa's copper orebodies was well recognized, the major discoveries which led to Mount Isa's emergence as Australia's premier copper mining and smelting operation were not known. These ore discoveries and their subsequent development are the major factors which warrant a further review of the Company's progress.The increased magnitude of the Company's operations is illustrated on graphs of Tons of Ore Treated (Fig. 1), Metals in Products (Fig. 2), Water Consumption (Fig. 3)...

Jan 1, 1961

Mine planning studies of iron ore deposits are often based on resource models generated by ordinary kriging. Ordinary kriging aims for local accuracy to minimise the variance of expected estimation error but this is at the expense of reproducing variability of the original sampling data. Hence mine planning studies using kriged models are likely to underestimate product variability, and the required blending and stockpiling capacity to reduce variability to an acceptable level. Instead, conditional simulation models of the main chemical variables in iron ore are able to reproduce likely variability to be encountered during mining and processing. This approach is demonstrated in a case study of the Weld Range bedded iron ore deposit in Western Australia, with a comparison of ordinary kriging and conditional simulation models. Conditional simulation models suggest that, compared with the single ordinary kriging estimation, there is likely to be far greater block variability for iron and impurities, a greater requirement for stockpiling and blending capacity, highest variability in initial years of mining and less variability in later years of mining for deeper ore. The conditional simulations provide a more realistic range of mining outcomes for production of high-grade ore, which may be seven per cent less than in the kriged model, as well as for lower expected project net present value (NPV). In year one, the kriged model is conservative for NPV; however, in later years two to five the kriged model has higher NPV than most conditional simulations, suggesting expected NPV based on the kriged model may not be achieved. For improved decision-making in mine planning, a complete range of possible outcomes from conditional simulations of the deposit should be considered rather than relying on a single kriging estimation that may be an end member case in the range of possible mining outcomes.

Jan 1, 2009

The term æindustrial mineralsÆ covers a wide range of minerals, from diamonds to silica sand, which are fundamental to the sustainability of a wide range of industries, from drilling mud to autocatalysts. The paper commences with an overview of the industrial minerals markets, with particular reference to the characteristics that impact on the development of a successful marketing strategy. This is followed by the identification of the steps to be taken in the negotiation and execution of an industrial minerals sales contract, from identification of the appropriate product through negotiation of the contract to ongoing customer relations. An understanding of your customerÆs business is fundamental to a mutually successful long-term relationship with that customer. The paper concludes with an overview of the techniques and approaches through which such a relationship may be achieved and maintained.

Jan 1, 2006

A method is presented for calculating the number of cycles of stress to failure of a drill rod from operating variables; a mathematical analysis by Cooper of the stresses present in drill steels is applied to the forged collar, i1i-in. hexagonal hollow drill steel in common use in Australia; and an estimation is made of the dry fatigue limits at various points along a drill rod.It is shown that these calculations predict failure at a 'point where failure rarely occurs, and do not predict that failure should occur where it does in practice. The reasons for this anomaly lie in the neglect of bending stresses in the stress calculations, and in failuredue to corrosion fatigue at a preferred section rather than to simpler fatigue under non-corrosive conditions.INTRODUCTIONIt has long been recognized that failure of metal sections by fatigue is influenced both by the number of cycles of stress imparted to the section (N) and by the magnitude of this cyclic stress (8). In this paper, both Nand Shave been calculated for rods which have failed in service, and whose operating history is known. While the calculation of the number of cycles to failure is·simple, the calculation of stress is more complex. The results of stress caIculations predict that failure should occur only hi short rods, and then preferentially at the tip end rather than the shank end.However, in actual fatigue failures of steel rock drill rods, approximately 75 per cent. of such failures are close to the shank end, and failures near the tip end are rare.The usual explanation given for this high incidence of shank-end failures is that at the point of failure there exists, in forged collar steels of the type common in Australia "hardness valley" or. "m'etallurgical notch". This narrow valley in hardness is a weakness, and failure is expected to occur at the weakest point at the bottom of...

Jan 1, 1955

Largely inherited from the past and from strictly internal laboratory use, the certification of reference material using round-robin assaying is often insufficient for the use made today for external assay laboratory control by client parties. Certification often needs to be revisited on the basis of existing round-robin data, especially to derive reproducibility parameters to the end of establishing probabilistic performance gates for operational error detection on a batch per batch basis (ie batch-ærejectionÆ). The most common difficulty arises when only a few certification samples have been analysed in one single batch by each laboratory, so that the round-robin data do not contain the full variability that needs to be quantified. Existing certification data sets from properly submitted round-robin samples were studied using analysis of variance to derive a remedial method, leading to the proposal of default correction factors to restore full variability estimates when no other avenue is available.

Jan 1, 2008

Process control computers are finding ever increasing applications within the chemi-cal and mineral processing industries.To purchase a system which fulfils both the immediate and future needs of operating, technical and management groups, requires an appreciation of the capabilities of the system software and the constraints which apply to user development of application software. Early decisions are then required as to who will develop and maintain the software. Rules and conventions must be determined and adhered to if the end result is to be an orderly, well structured and properly documented system. Software development and maintenance represents a substantial, and often hidden, cost. Getting it right the first time will avoid either a major re-work, or having to live with a system which is extremely diffi-cult (at the worst, impossible) to trouble-shoot or modify.

Jan 1, 1985

By Scholl EW, Ricken W

The simultaneous presence of fuel, oxygen, and of an ignition source is necessary for an explosion to arise. If one of these conditions is missing an explosion cannot take place. A continuous reduction of oxygen, often applied as a protective measure in surface plants, is not to be considered for underground mining because of possible danger to persons. Therefore, measures for avoiding explosions can only be concerned with lowering methane and coal-dust concentrations to an undangerous level and avoiding ignition sources. As these measures alone are not sufficient, additional ones have to be taken to keep the effect of an explosion as low as possible. Measures for controlling and monitoring methane are essential. Although the formation of dangerous coal dust concentration cannot be avoided it can be reduced. Dust-binding by means of hygroscopic pastes and dusting with limestone dust are effective measures to pre vent explosions.

Jan 1, 1981

The Liddell longwall equipment consists of 118 four leg supports, a shearer and armoured face conveyor of 170mm length. The equipment was supplied to Coal & Allied Operations Pty Limited (Coal and Allied) by Westfalia Australia Pty Limited (Westfalia). The project commenced as a feasibility study in 1983, a proposal was put to the board of directors in March 1984 and a specification distributed. Nine companies tendered for the supply of a longwall face and the supplier was selected from a short list of four companies. At the same time Coal & Allied examined the facilities at Liddell Colliery and decided to upgrade the conveyor belt system to cater for the high production from a longwall face. The surface facilities, transport system, water and electrical supplies to the colliery were also to be upgraded. During the twelve months to December 1985, the colliery was upgraded while the longwall equipment was being manufactured. The manufacturing process involved roof support testing, compatibility testing and finally a build up of 40m of longwall face

Jan 1, 1986

By J E. Everett

At BHP Billiton Iron Ore Newman Joint Venture (NJV) ore is railed from four separate mine operations in the Newman area to Port Hedland, where the ore is screened, crushed and blended to produce lump and fines NJV products. Each mineÆs grade varies separately, so it is important that a centralised system is in place to control the overall blend and ensure that the products meet customer expectations. It is important that grade- related decisions are built into the normal production process and have minimal impact on production rates. A continuous stockpile management system (CSMS) covering the whole NJV production process is used to generate the daily crushing schedule, taking into account all currently available ore sources. Innovative additions to the CSMS provide more accurate information to support decision making by the mine schedulers; for example, blasthole estimates are continually adjusted for bias compared to crusher and port rake grades; lump-fines (L-F) grade split and beneficiation plant upgrade algorithms are updated on a continuous basis, and the dilution effect, which impacts on reported port rake grades, is removed.

Jan 1, 2007

By Netchaef P

A rationale is presented for the use of vegetation on mine dumps to minimise runoff and infiltration which become vehicles for potential pollution. The unique topography of mine dumps promotes high atmospheric advection which leads to extraordinary energy levels for evaporation discharge - the driving force of vegetation "pumps". This effectiveness is mainly a function of how well the vegetation will grow on a given site. Recent advances in technology allow water discharge by vegetation to be measured semi-automatically, accurately and cost effectively. As a result the basis now exists for a thorough evaluation of the optimum mine dump vegetation cover. This paper presents the current status of dump rehabilitation as seen by the mining industry. The significant prospects for use of vegetation to minimise mine water related problems with subsequent savings in capital and operational cost are also outlined. However, to examine the crucial questions of optimum hydrological ability, suitability and cost effectiveness of various types of dump vegetation a proposition is made to interested parties in the mining industry: The CSIRO needs potential study sites to evaluate the hydrological ability of vegetation under mine dump conditions.

Jan 1, 1988

To meet the objectives of sustainable development, mining projects must be executed with minimal environmental risks and impacts. To allow proper actions to be taken, it is helpful if the environmental challenges associated with a mine development project can be predicted early during exploration activities. Signs of impending environmental problems like acid rock drainage and metal leaching are often revealed in the occurrence of natural acid drainage, formation of efflorescent salts and their associated ecological effects. Other subtle clues can be deduced from anomalous geochemistry, detailed textural features of mixed sulfide assemblages and miscellaneous environmental data sets covering the target areas of exploration. A more practical tool, however, is the development of comprehensive environmental ore deposit models containing relevant information on ore genesis, applicable mining, processing and waste management options and their environmental implications according to deposit type. Not only will such models facilitate communications among independent groups of personnel involved in a mining project to come up with schemes to ensure better environmental performance of the overall project, they will also facilitate decision-making if a mine development project should be pursued further or valuable resources be redirected to other more favourable targets.

Jan 1, 2003

This paper reviews the geochemistry of weathered nickeliferous sulphidic and lateritic profiles, the supergene behaviour of nickel and ore-associated elements, and their implications for exploration in an attempt to distinguish between barren and mineralised nickeliferous profiles. Nickel is an abundant accessory element in ultramafic rocks with background concentrations in some units up to 0.25 weight per cent. Ore-grades in fresh rock are mostly associated with massive and disseminated sulphide zones within magnesium-rich layered ultramafic sequences. In lateritic weathered terrain, nickel is also concentrated in the regolith profile. This process not only upgrades nickel in the gossanous weathered product of sulphidic deposits, but for sub-economic sulphide zones and some ultramafic rocks, is sufficient to result in a supergene resource. Ore-grade accumulations of nickel in regolith after sulphide-poor ultramafic rocks are referred to as lateritic deposits. Nickel sulphide zones and their ferruginous weathering products are collectively referred to as sulphidic deposits and are the major source of nickel in Western Australia. Mineral exploration in the Yilgam Block is hampered by deep lateritic weathered profiles (eg Butt and Sheppy, 1975; Smith, 1977; 1982). During the nickel boom of 1967 - 1972, most discoveries resulted from the location of outcropping nickeliferous gossan and ironstone. Exposed ultramafic terrain with nickel sulphide potential were explored intensively, mostly by gossan and soil sampling. However, up to 85 per cent of the area of the Yilgarn Block is buried by transported regolith. In these covered areas, barren and mineralised rock responses at the surface are similar and soil sampling produced unreliable results due to many false anomalies. A statistical, multi-element approach to regional geochemical exploration has evolved. Potential trace element indicators investigated, include Co, Cr, Cu, Ir, Mn, Pb, Pd, Pt, Sc, Se, and Zn. In recent years, trace element ratios have also been tested with varying degrees of Success.

Jan 1, 1996

The grade (or value) to volume relationship which constitutes a target orebody is used to show that the concentration of diamonds in an economic deposit may be as low as O.Olg/t. Diamond valuations from an Indonesian deposit demonstrate that the largest 5% of the diamonds in the deposit contributed 25% of the mass of diamonds recovered and 70% of the value from the ore. The need to consider the large stone content and the probability of recovery is used to estimate that the sampling density is required to be as high as 4-10,000ppm for a VLC deposit. This is compared with an acceptable sampling density for a bauxite deposit of 700ppb. A case history of the discovery of a diamond bearing paleo-channel in the Ellendale field in Western Australia illustrates that the sampling task becomes impractical. It requires an excavation in excess of 300,000 bcm of material to prove a 5M hem ore reserve. The conclusion is reached that setting up a small scale mining operation is an appropriate method of proving such an ore reserve and that the Code of Reporting should allow a category of "Mineable Resource" to cover such a situation.

Jan 1, 1990

By J Walasiak

In the climate planning of mines and tunnelling with anticipated poor climatic conditions, and especially in case of longer working shifts, the main question is whether it can be reliably prevented that certain climatic limits laid down be exceeded. Working at high temperature and/or humidity can lead to reduced human working energy û a very important economic aspect û and to a risky lack of concentration on the part of the miners or to heat collapse and extremely dangerous heat stroke. With the Deutsche Montan Technologie GmbH (DMT) climate prediction programs, both the dry and the extremely significant humid heat transfer can be calculated. This is due to the high planning reliability involved. With the help of these climate prediction programs it is already possible to determine the anticipated climatic values for the operation phase as early as the planning stage of new ore or coal fields or of tunnel construction projects and to design the optimum air cooling system for every underground project with due regard to technical and economic aspects.

Jan 1, 2005

Passive systems for the treatment of acid mine drainage (AMD) are typically more economic in the long term than active systems. Various flow charts for treatment selection have been prepared by scientists in the USA, however, they have typically not included a variable important at New Zealand AMD sites on the West Coast: topography and available land area. Very steep topography, dense and often protected vegetation (and animals such as snails), and a high-rainfall climate result in AMD with very high flow rates in locations with very limited space for remediation. Flow charts specific to New Zealand have been prepared which accommodate topography and available land area. Parameters necessary to use the flow charts are iron and aluminium concentrations, pH, ferrous to ferric iron ratio, dissolved oxygen concentration, topography and available land area. Prior to full scale construction, is it recommended that flow rates be quantified, small-scale trials be conducted, and cost, effectiveness, limitations, and risk of failure be reviewed for various options. One full-scale remediation system has been installed in New Zealand based on this methodology and another is planned. The performance of these systems, as well as future systems to be installed, will be used to validate these treatment system flow charts.

Jan 1, 2007

By E Wan, K Stokes

Since 1978, the nickel concentrator at Leinster has been subject to continuous change. In 1971 a significant nickel sulphide deposit was discovered on Leinster Downs Station, within three years the extent of the deposit was determined. In 1978 the Agnew Mining Company began production of nickel concentrate from the Perseverance Mine and continued to do so until production ceased in 1986. In 1988 WMC purchased the mothballed project and began the first phase of many expansion initiatives. Milestones in the life of Leinster have included:open cut mining of the Perseverance orebody and the discovery of the RockyÆs Reward orebody, as well as the metallurgical challenges in treating each of these; underground mining at both Perseverance and RockyÆs Reward; construction and commissioning of the WMC grinding and flotation circuits; variations in the reagent schemes, including the introduction of æliquidÆ reagents; development of mill linings to reduce maintenance; circuit re-configuration and simplification; development of Harmony open cut; strategies for increasing throughput at the drier; and changes to tailings facilities to cope with increased throughput. This paper outlines the steps which have been required to expand the Leinster Nickel Concentrator from 650 000 tpa to 2.5 Mtpa and those steps which will be required in the future.

Jan 1, 2000