Search Documents

The design, construction and operation of a 500,000 tonne per year Carbon-In-Pulp (C.I.P.) plant at Kambalda embracing the period from 1980 to 1982 has been previously discussed (Sceresini, 1982).Since that time the annual throughput rate has increased to 780,000 tpy.This paper discusses the changes and improve-ment made to allow this increased production to occur with minimal capital expenditure.

Jan 1, 1984

The Bowen Basin of Central Queensland covers a total area of 3 200 000 ha. The Basin has proven reserves of about 24 000 000 tonnes of coking coal and steaming coal which constitutes about 70 percent of the known coal reserves in Queensland. Large scale open cut coal mining in the Bowen Basin commenced at Moura in 1959. There are now 16 open cut mines operating in the Basin and they collectively mine through about 3000 ha of land each year. Most of the land which has been mined has previously been used for extensive grazing. No mining has yet taken place on cropping land although coal reserves underlie land which has been cropped or has potential for cropping. The primary objectives of almost all of the mining companies operating in the Bowen Basin are to rehabilitate mined land to a stable and productive form which is compatible with surrounding land use which is dominantly grazing. The acceptability of these objectives is considered against the prospect of mining of cropping land and the qualified success of the return of rehabilitated land to grazing uses.

Jan 1, 1987

By Roberts T. J, Thomson I. A

Mill scale, which contains a high proportion of magnetite and wustite, was added to the feed to the Whyalla grate kiln pellet plant during the production of acid pellets for domestic consumption. Its addition resulted in increased production -rates together with reduced consumptions of bentonite, fireclay and fuel. Mill scale was particularly beneficial when treating feed containing difficult to process, earthy, high ignition loss iron ores. Test work in the laboratory and subsequent plant experience showed that the magnetite and wustite oxidised in the drying and preheat sections of the travelling grate. The additional heat reduced gas flows through the grate kiln system, aided the drying of green balls containing earthy ores and increased the preheat strength of the balls. These advantages were offset to some extent by higher power consumptions to grind the harder mill scale and process difficulties caused by the contamination of mill scale with oil and coke.

Jan 1, 1974

By E Hogan, M Goodz, R Wright

The planning, permitting and monitoring procedures of the re-opening and rehabilitation of mine sites is an ongoing process which must continue throughout and beyond the life of the project. Both industry and government bodies must remain flexible to allow guidelines to be altered where and when necessary.To enable the successful re-opening of the Morning Star mine at Woods Point in alpine Victoria, many environmental and historical issues had to be evaluated.The site which had been derelict for 28 years had to be rehabilitated to a safe and aesthetically pleasing state prior to construction of a new operating mine site. Considerable liaison with government authorities and the local community was required.

Jan 1, 1992

The State of Western Australia has a land area of 2 525 000 km2, and is well endowed with minerals and petroleum products. In 1989 - 90 these products were valued at nearly A$10 500 million.

Jan 1, 1992

By Denholm WT

A mathematical model has been developed for intense pneumatic smelting processes, such as the Sirosmelt group of processes, to assist in establishing optimum process conditions and to permit operator training. The model first solicits input operating conditions from disk files and from the operator. During operation, the feed, fuel, and air (or oxygen) rates are automatically adjusted to maintain the desired process targets. Alternatively, these parameters, as with all other inputs, may be manually controlled by the operator. Selected process parameters are displayed to the terminal in a regularly updated diagram of the process,. Outputs of detailed information including heat and mass balances are available for immediate inspection or for use by ancillary plotting packages. Development of a robust free energy minimization routine has led to a flexible and time efficent model capable of handling a range of pyrometallurical systems. Modelling of tin smelting, lead smelting, copper smelting, matte fuming, and pneumatic steel-making has been sucessfully carried out. Typical outputs from the model are given and discussed in terms of their internal consistency and relationship to the operation of the relevant Sirosmelt process. `

Jan 1, 1984

By Rogers J. F, Bird A. C

The establishment of vegetation for dust control on tailings dams at The Zinc Corporation, Limited and New Broken Hill Consolidated Limited (ZC/NBHC) is outlined. The evolution of practices and techniques employed is described and the problems encountered are discussed.

Jan 1, 1983

By Stewart Gillies AD

Resource rent taxes are taxes which only become effective at such a time as a pre-determined rate of return has been achieved by an operation. Resource Rent Taxes have from time to time been considered for implementation in both Australia and New Zealand. The offshore petroleum industry in Australia is already subject to RRT as is the Roxby Downs (Olympic Dam) Mine in South Australia. Both the mining and petroleum taxation regimes in Papua New Guinea include a resource rent tax component called Additional Profits Tax.

Jan 1, 1995

Since its beginning, with the works of D. Krige and later, G. Matheron, geostatistics has been analyzing in detail the essential factors at play in ore reserves estimation problems, with the ever-present aim of an optimal use of the available information. Not only do the reserves depend on the geological in situ resources, they also require a correct appraisal of many technical and economical parameters. The objective of the present paper is to show how the method of technical parameterization of reserves, which is at the heart of the geostatistical approach, provides an extremely powerful and versatile tool for characterizing a mining project. After a review of the main properties of the technique, its use in the economic optimization of a project will be examined. Two examples from copper and gold deposits will be given.

Jan 1, 1987

The treatment meIhods selected for the concentrator at Cobar Mines Pty. Ltd. called for a high degree of automatic control of both the grinding and flotation sections.The resulting concentrator layout includes a central control room overlooking both grinding and flotation sections. The control room houses process recorders, controllers, and indicators. together with motor stopstart stations and alarms.Plant instrumentation includes load cells and variable speed hydraulic drive feeders for feed-rate control of autogenous mills, together with nuclear density gauges, differential flow transmitters, and pneumatic control valves for water and pulp density control.Flotation cell pulp levels are controlled by floats and pneumatic actuators; flotation reagent controls include magnetic flowmeters and time-operated solenoid valves.

Jan 1, 1969

A zone rich in-fish debris in the Rolling Dow= Group in the sub-surface of the Great-Artesian Basin has been discovered a Further research has shoe i this zone to-be of very wide distribution in the Artesian Basin and to occur. at the base of the Ta?nbo .f ormati'on resting on the Roma forma-tion. The zone gives a very characteristic curve on the electric and' gamma ray logs and is thus an excellent correlation marker in the sub-surface over a very wide area. It is probably to be correlated sith.the Toolebuc member described from: outcrops east of Boulia. There .are apparent similarities between the Fishecale zone of the Great Artesian Basin in' Australia and the Fishscale sand of the Western Canada Sedimentary Basin.

Jan 1, 1962

By Brant BA, Lewandowski R, Trendle M, Haughton D

There is a vast amount of geotechnical data, which can be obtained during exploration programs at new and existing mine sites. Additional information on the performance of the in-situ rock mass can be obtained from bore cores, which are usually only geologically logged and then stored. A computer based data management system for storage and retrieval of geotechnical data has been developed to access and manipulate such data.

Jan 1, 1983

The behavior of a curved wall under earth pressures for a horseshoe shaped tunnel lining is considered to be closely related to the beha vior of a vertical beam with variable flexural sti-"ness on an elastic foundation. In stress analysis an approximate method which divides the axis of the tunnel lining into small finite lengths and replaces the integrals by summation is usually adopted. this method is extremely complicated and tedious. However the variations of the moment of inertia from point to point along the wall axis can be expressed by a power function inversely .eith the distance from the ll )ottom and the analytical method can still used. The equations for the calculation of deflection, rotation, bending moment, shearing urce, and soil reaction of the curved wall are derived in nondimensional forms in this paper.

Jan 1, 1987

Natural gas was introduced to the Melbourne reticulation system in April 1969 and since that date sales to industrial consumers in the Gas & Fuel Corporation of Victoria area of supply, have increased by over 50% This increase has occurred despite the fact that the areas in which the new fuel is available have been dependent on the progress of the conversion operation from manufactured gas. The half way mark for conversion was reached in May 1970. The reason for the adoption of natural gas by industrial users is usually the result of objective financial analysis leading to the conclusion that the new fuel will give the lowest overall production cost. Many factors are involved in such an analysis of which the price of the fuel is only one. Amongst other important elements in the cost calculation are:- -ò òò -(1) The effect of fuel on product quality (2) Maintenance and handling costs for alternative fuel. In addition to economic gains for the individual user, the use of natural gas should benefit the whole community through its effect on such things as, air pollution and overseas balance of payments.

Jan 1, 1970

Operations at two open cut mines have so far commenced on two out of the five potentially mineable seams in the Fair Hill - German Creek Coal Measures. Due to seam splitting, up to seven mining units are present in the Dysart Seam interval at Peak Downs giving a total of 12 mining units in the section. The coal is low to medium volatile type and produces strong coke. Rank increases and fluidity decreases in the southern part of the area.

Jan 1, 1974

In order to formulate appropriate and useful education and training policies and practices, it is crucial to firstly consider the demographic environment of our workforce-and the direction in which it is (known to be) heading. We can predict with a degree of certainty, that the role and influence of training on the future survivability of organisations will- become increasingly critical. This will be particularly relevant for those industries and organisations which are technologically based. The ad-hoc use of training is and, will no longer be appropriate. Organisations must move toward the on-going use of a dynamic education and training strategy based on an effective staff development programme, which meets the short and medium term needs of the organisation. The Technisearch approach is based on maximizing the efficacy of training and learning. The package provides.a total service to meet clients training needs using educational techniques geared to adult learning. it stresses the importance of ongoing research into industrial adult training and its effectiveness in improving skills and productivity. Current research on roles of supervisors in the Australian workplace and the development of the Supervisory Behaviour Questionnaire. (SBQ) indicates the need for a proper framework within which the objectives of training can be addressed.

Jan 1, 1986

By Harraway DH, Tanner AC

The various circuits tried!at Mount.Isa Mines during the period 1959-1963 to improve the differential%f lotation of galena and sphalerite are reported. The benefits and disadvantages of 'the various circuits are discussed. An analysis of ore charao-beris;ics.and their effect on flotation is followed by the d~soription,of a proposed".cirouit in the process of install-ation.

Jan 1, 1963

By A S. Ray, P S. Thomas

The characterisation of the surface area and porosity of opals derived from Tintenbar, a volcanic environment, and Lightning Ridge, a sedimentary environment, using nitrogen gas adsorption at -196¦C is reported. Both opal types were found to have relatively low surface areas and displayed little porosity. The low surface areas observed is indicative of the ability of silica to infill voids and interstices. Thermogravimetric analysis of the samples before and after degassing was carried out to determine the amount of water removed by the degassing process. Negligible difference was found in the water content before and after degassing in the case of the Lightning Ridge sedimentary opal, while the Tintenbar volcanic opal was found to have lost more that 60 per cent of its water during the degassing process. These differences were ascribed to the differences in the silica structure of the opals with the Lightning Ridge opal having a denser cage structure, which traps the molecular water, while a more open structure is postulated for the Tintenbar opal, allowing the water to be relatively easily removed.

Jan 1, 2008

By Hall K

The Osborne copper gold mine, 100 per cent owned by Placer Pacific Limited, is situated 195 kilometres south east of Mount Isa. The orebody is broadly categorised into three main ore zones; oxide, transitional and sulphide copper. Copper oxide

Jan 1, 1997

The process of establishing the design criteria is the key step in commencing a new project.. The method for establishing design criteria and translating them to a workable plant design is described. INTRODUCTION The use of activated charcoal to recover gold from alkaline cyanide leach liquors is the most rapidly expanding technology in hydrometallurgy today. The process, known as carbon-in-pulp (CIP), has replaced countercurrent decantation as the method for recovering gold by cyanidation. Carbon-in-pulp entails mixing activated charcoal with a ground ore-water slurry containing gold cyanide, allowing the charcoal to adsorb the gold, and then mechanically removing the gold loaded charcoal from the pulp. The pulp is sent to tailing disposal and the loaded charcoal is sent for gold bullion production. Activated charcoal's affinity for gold has been docu- mented for over one hundred years. In the first cyanide plants, one of the preferred methods of stealing gold was to place a piece

Jan 1, 1982