Search Documents

By Andrea Koschinsky, Luise Heinrich

(for an oral presentation) Activities for preparing future deep-sea mining offer the unique opportunity to study environmental conditions and anticipate adverse environmental impacts prior to the commercialization of the activity. Until know, environmental research has first and foremost focused on understanding direct impacts occurring at the seafloor or in the water column such as the removal of substrate, the suspension of sediment or the creation of particle plumes. Impacts occurring above the sea surface have thus far rarely been considered. The operation of deep-sea mining equipment, as well as of mining and transport vessels will be associated with a considerable energy demand. In the open ocean, this energy will be provided by heavy fuel oil (HFO), which is the cheapest and most common marine fuel. The combustion of HFO will be associated with the release of greenhouse gases and other pollutants. Deep-sea mining will thus directly add to already critical air pollution levels caused by international shipping. To contribute to a holistic assessment of deep-sea mining impacts and to address the previously outlined knowledge gap, we present the methodology to quantify the fuel consumption and associated emissions of a potential typical commercial manganese nodule mining operation in the Clarion-Clipperton Zone (Fig.1). Using the mine set up and energy demand estimates from a study commissioned by the German Federal Ministry of Economic Affairs and Energy supplemented by information from literature, we anticipate emissions of carbon dioxide (CO2), carbon monoxide (CO), methane (CH4), nitrous oxide (NO2), nitrogen oxides (NOx), sulfur oxides (SOx), particulate matter and non-methane volatile organic compounds.

Jan 1, 2018

By Jayne Holden

Development of a deep-sea mining system is a new and interesting field of research. Commercial mining of the ocean floor for SMS deposits is yet to occur, and while exploration of the undersea has been undertaken by various research institutes exploitation of SMS deposits is yet to be investigated in detail. Industry has been stimulated by the potential development of economically viable deep-sea mining methods. The establishment of deep-sea mining production has also been encouraged by industry trends. These include the success of the oil and offshore diamond industries, scientific advances in computer modeling, technological advances in undersea exploratory equipment and further development of the Law of the Sea. This project also presents an opportunity to build on UNSW?s established reputation, positioning the Mining Research Centre as a leader in this specialized field of research. This project aims to form a greater understanding of the environmental conditions associated with SMS deposits, detailing the physical, biological and chemical characteristics of typical ocean floor sites from an environmental management perspective. With the aid of previous numerical models and disturbance experiments that have been conducted at various ocean floor sites worldwide, new virtual reality models will be developed to enable assessment of the environmental impact of the undersea mining process. These models will simulate seafloor systems prior to mining through various stages including particle distribution and sediment disturbance, to illustrate the impact of a number of proposed mining techniques. The model will allow users an interactive virtual experience of a potential SMS deposit site where hotspots can be identified and mining processes can be demonstrated. This initial baseline model will help to establish generic parameters, which can then be modified and tailored to simulate a wide range of deposit sites and differing mining processes. These models will be validated with the development of appropriate physical modelling.

Jan 1, 2002

By Mike Woodborne

The marine diamond industry off south-western Africa is maturing rapidly. Some of the larger explorers have reached an advanced stage in their resource development and new mining operations have been started in the last year. Most of the major exploration, mining and marine engineering companies have offices in Cape Town. As a result of the increased activity and experiences to date, new approaches to marine diamond exploration and mining are now evolving. Primary factors contributing the new approaches are namely 1) the concentration of expertise in a localised area 2) the significant increase in the base of available exploration and production results and 3) parallel advances in the marine engineering design and geophysical survey equipment. The sea floor geology and setting of the marine diamond exploration areas is now better understood. Consequently the strategy for exploration and the selection of appropriate survey equipment is improved. Due to new equipment developments, different exploration alternatives now exist, depending on the programme objectives. Significant advances have also been made in the data processing and modelling undertaken to assist in the identification and targeting of potentially diamondiferous prospecting features. Similarly, the design of appropriate prospecting tools and programmes has also been improved. Following exposure to the requirements of the marine diamond industry, the design engineering and operating companies have responded with innovative designs for new prospecting tools. In recent years the availability of relevant information on marine diamond prospecting and production has increased. As a result, there is now sufficient basis for the construction of meaningful financial valuation models that can be effectively used to control and guide the exploration projects, to the benefit of both the explorer and the investor.

Jan 1, 1998

By Seung-Kyu Son

Environmental properties of the northeast Equatorial Pacific along 131.5 degrees west, between 5 degrees and 13 degrees north latitude, were investigated in association with changes in water column structures during the summer seasons of 1998 and 1999. Climatic disturbances such as El Nino and La Nina, should have affected this area during the study period. In 1998, a thermocline where temperatures rapidly decrease with depth, was formed at 90~110 m water depth. However, in 1999, a very fluctuating thermocline was observed with latitudes. As a result of changes in the water column structures, biological and chemical environment also showed fluctuation parallel to the changes in other physical parameters. Inorganic nutrient depleting areas, especially for nitrate+nitrite and phosphate, or oligotrophic regions were extended down to approximately 100 m depth, which coincided with the surface mixed layer depth. In the euphotic zone, depth integrated nitrogen (N) and phosphorus (P) values were 34 g-N/m2 (grams of Nitrogen per square meter of sea floor), 7 g-P/m2 in 1998 and 130 g-N/m2, 18 g-P/m2 in 1999, respectively. The results indicated that nitrogen (96 g-N/m2) and phosphorus (11 g-P/m2) are supported by up-welling and down-welling phenomena with convergence and divergence in the study area. Biological parameters in the water columns were largely determined by the physico-chemical environmental parameters. Subsurface chlorophyll maximum layers were coincided with the formation of seasonal thermocline. Copepods were the dominant group of zooplankton community at three sampling stations (N5, N6, N10) terms of abundance, which was the same results of previous surveys for the past 3 years. Among copepod populations, Oncaea sp., Oithona sp. Clausocalanus sp., Acarocalanus sp. and juvenile copepodites were dominant Appendicularians, foraminiferans and radiolarians were also dominant. To investigate diel vertical migration pattern of zooplankton, repeated samplings from the water depth of 0~50m and 50~200m were conducted at KODOS (Korea Deep Ocean Study) area before and after sunrise. Zooplankton abundance was slightly higher after sunrise than before sunrise in the surface layer. Chlorophyll-a concentrations were relatively low as the concentration of sediment increased in most experiments possibly due to a decrease of grazing pressure of microzooplantkon such as ciliates, which is the efficient grazer on small-sized phytoplankton. Because copepod predation on microzooplankton may be prevented by the high concentration of sediment, resulting in lower grazing pressure on small-sized phytoplankton. The results obtained during the baseline study as a part of KODOS project since 1998.

Jan 1, 2001

By Tobias Hens, Andrew Frierdich, Barbara Etschmann, Joël Brugger, Barrie Bolton

"Advancing our knowledge about trace metal distribution and abundance provides insight into formation, alteration, and trace element enrichment processes of ferromanganese nodules and crusts. A fundamental understanding of these mechanisms, in turn, has implications for the selective recovery of critical metals and the development of sustainable hydrometallurgical techniques. Synchrotron-based X-ray Fluorescence (SXRF) is a powerful, state-of-the-art analytical tool that can examine geochemical features of Fe-Mn nodules and crusts, such as abundance and distribution of trace elements, in an integrated and efficient manner. By correlating trace element composition and Mn oxidation states in these highly complex samples, it can be determined whether these parameters are related to the Mn oxide mineralogy (vacancy content of crystal lattice) and chemistry.In this study, eleven Fe-Mn nodule and crust samples from three circum-Australian locations – the South Tasman Rise, Lord Howe Rise, and Coral Sea – were analyzed at the Australian Synchrotron, Victoria, Australia. Micrometer-scale spatial resolution of geochemical features, such as concentric growth structures and element distribution, was achieved with high sensitivity (Fig. 1). For instance, Ni could be detected at 10's of ppm to 1 wt% levels. Information on other redox-sensitive trace elements, which are present at 10-1000 ppm levels (e.g., Cu, Co, Ti), were gained by means of fully quantitative elemental composition maps."

Jan 1, 2017

By Gary J. Massoth

Are hydrothermal emissions from subduction-related volcanic arcs important to the total hydrothermal burden of the oceans? While historical observations of hydrothermal venting of fluids at mid-ocean ridgecrests, intra-plate hotspots, and backarc spreading centers are numerous, we remain poorly informed regarding the contributions from hydrothermal systems associated with oceanic submarine arcs. Here we report the chemical results from the first systematic assessment for hydrothermal activity at an intra-oceanic arc front. We discovered that 7 of the 13 submarine volcanoes that define a 260-km-long segment of the southern Kermadec arc north of New Zealand are hydrothermally active. Most significant here is that the chemical compositions of the various hydrothermal systems, inferred from back-extrapolation of observations of hydrothermal plumes, are diverse, and in many instances enriched in the concentrations of gases (e.g., CO2 and H2S) and metals (e.g., Fe and Mn) compared to effluents commonly discharged from mid-ocean ridges. If our results are generally representative of submarine arcs, whose global extent may equal one-third that of ridgecrests, the answer to our leading question could be a resounding yes in terms of both volume and chemical composition.

Jan 1, 2001

By Lu Jun

Up to now, much data on marine minerals, as well as on marine geochemistry, have been accumulated. Modem computer databases provide optimum flexibility and power for manipulating these data. The best worldwide marine mineral database is currently the Marine Minerals Bibliography and Geochemical Data Base created by Carla Moore et al. at the National Geophysical Data Center in the United States. In fact, in the course of studying marine minerals and geochemistry we may collect not only digital-character type data but also graph and image (black-white, grey and color image) data types. For instance, correlation diagram between chemical compositions of minerals, spectroscopic graphs, (e.g. infrared spectra, Mossbauer spectra, etc.), grey or color images from both optical and electron micro- scopes (scanning or transmission electron microscopes) as well as seabed photographs. Charles L. Morgan et al. (1993) reported that 10,000 photographs and some video images of the seabed in the Clarion-Clipperton region of the northeastern tropical Pacific have been collected by the Ocean Minerals Company. If both graphic and analytical information were stored in a database, it would be very useful and convenient to marine geologists. This system would not only be able to search for all the data based on one parameter, but also for both size and composition distributions. If possible, geostatistical methods could be combined with fractal dimensional methods. Of course, this would require enormous efforts. Before multimedia technology emerged, it was very difficult to create image databases. The emergence of large-capacity compact discs, high-speed central processing units, and high-speed digital signal processing techniques makes it possible to establish multimedia database management systems (DBMS), image-text DBMS, that involves graphs, text, images, and sound. In order to store image fields in a DBMS, we have to take into account two problems: (1) image access format and (2) image compression code standard.

Jan 1, 1994

By Terence Day

The traditional approach to mineral resource development is to identify the resource and then to undertake an environmental impact assessment of the effects of developing the resource. However, the traditional approach tends to ignore or underestimate cumulative, indirect and synergistic effects (Therivel et al., 1992). Moreover, traditional environmental impact assessment puts the project proponent in a position where the environmental impact assessment is used to defend on environmental grounds, a decision which has already been taken on technical and economic grounds. An alternative approach is to undertake an area-wide or strategic environmental assessment, (United States Department of Housing and Urban Development, 1981; Kelly et al., 1987). Strategic environmental assessment consists of the compilation and analysis of environmental data and information on an area. The data and information includes physical and chemical oceanographic data, biological surveys, social and economic parameters such as recreation and resource use, and ecosystem stressors such as dumping areas and sewage outfalls. Strategic environmental assessment is being increasingly used in the U.S. to provide scientific information to evaluate national or regional objectives for development and conservation of coastal and oceanic resources (National Oceanic and Atmospheric Administration, 1991). The strategic environmental assessment process lends itself very well to an evaluation of offshore sand and gravel re- sources in Atlantic Canada, because although the potential resource is widespread, the environmental constraints on development are potentially serious, but highly variable. The approach has the merits of identifying areas which are least susceptible to environmental damage, and of concentrating the exploration efforts on that part of the resource which is most viable from the perspective of integrated resource management and marine conservation.

Jan 1, 1995

By Anthony T. Jones

Deep seabed mining requires technology to collect materials and transport them to the surface. An international patent search was conducted to define the state of the art in seabed mining technology. Over 350 patents were identified from 12 patent systems. The majority was from the United States, Japan, and the former USSR. Patent activity in this field peaked in 1983 when 34 patents were issued. Since 1984, on average 6 patents have been issued annually. The technology represents ten major classifications. With the exception of Deepsea Ventures, Kawasaki and International Nickel, it appears that much of the technology developed and tested in the 1970s by consortia active in seabed mining was never patented. Over the past two decades, identifiable trends in marine technology could influence seabed mining application such as more sophisticated communication systems, advances in hydraulic manipulators, improved computational technology in navigation, modeling of vessel ? ocean interactions, and improved materials. The most significant recent activity has been in European applications, which disclose remotely controlled subsea vehicles for mining diamonds.

Jan 1, 2001

By J. C. Wiltshire

Both ferromanganese crusts and nodules present potential processors with enormous volumes of tailings of dubious environmental character: most processing scenarios fail to utilize the uneconomic manganese itself, leaving a total waste volume on the order of 96% of the incoming ore. Each current disposal proposal seems flawed: (1) backhauling to the initial mine site is costly and might run afoul of EPA or UN marine dumping*regulations, (2) subsea disposal near a coastal processing site means almost inevitable community opposition, (3) agricultural soil amendment for improving barren lava or coral rubble appears to require prohibitive amounts of supplementary phosphate, and (4) the slag resulting from an energy intensive pyrometallurgical processing may have potential as road ballast, but few processors will opt for smelting in all but those locales where energy is very cheap. This unfortunately rules out a smelting operation in almost any Pacific Island environment. We envision at least one other scenario which could result in both the removal of tailings from a processing plant and an increase in the supply of useful building materials at little or no cost to either the processing or construction industries--transforming a tenacious waste into a novel resource. Ongoing experiments have demonstrated considerable potential for turning acid leach tailings into dark composite facing stone, fancy black tile, novelty ceramics or concrete aggregate. The tailings are commonly very fine grained and may also serve as an additive in drilling mud. Applications as an additive to asphalt also need to be explored. The metal scavenging nature of ferromanganese minerals should be considered as a radioactive waste disposal matrix. There is no doubt that the greatest challenge will be

Jan 1, 1991

By Dan Johnson

The discovery of rich alluvial diamond deposits on Namibia?s Skeleton Coast in 1908 began a period of intense exploration and mining off the coastal sand; and shallow surf zones. In the mid-60s a Texas entrepreneur, Sam Rollins took the search to the seafloor. The inhospitable conditions encountered made the early going difficult. After a slow start, the past 10 years have seen much progress in geologist?s understanding of the deposition mechanics and the use of sophisticated geo-physical and sampling techniques to aid in the discovery of economic deposits. Diamondfields, in a joint venture with BHP and Benguela Concessions, began an exploration program in 1994 for sea-bed diamonds off the Port of Luderitz in Namibia. This program has progressed to a mine development program with the potential of creating a 500,000 carat per year operation. The mining technologies being considered include state-of-the-art, remotely operated sea-bed crawlers and high volume dredges feeding to semi-mobile processing platforms. The company's objective is to use the best proven technology to create an environmentally responsible operation with the lowest fixed operating costs and the longest and safest weather operating window of any offshore operator working Africa's diamond coast.

Jan 1, 1998

By Thomas Pichler

In the past marine mining technology has focused on bulk mining of base metals from polymetallic massive sulfides. This has not been very successful because of the relatively low unit value of these metals and other reasons such as water depth, etc.. The process of gold enrichment in hydrothermal deposits is controlled through five different factors: (1) nature and source of the solution, (2) source of the gold, (3) a mechanism for mobilizing and transporting, (4) a mechanism for deposition, and (5) a mechanism to preserve the deposit. Gold has been identified in marine polymetallic massive sulfides from various locations on the ocean floor (e.g., spreading centers, seamounts) with contents ranging up to 5 ppm Au. This is within the current range of 1.0 to 7.0 ppm gold content which classifies gold ores. The gold appears to have been derived during hydrothermal alteration of the oceanic crust. Until the present there has been little attention to the possibility of mining gold or other precious metals in the marine environment. However, the magnitude of hydrothermal alteration (seawater can penetrates to a depth of 5 km into the oceanic crust) and primary gold contents of the rocks in the pathway of the fluid indicates that major gold deposits must have formed on or in the ocean floor, but they have not been found. To find a big deposit might only take an exploration model exclusively designed for gold exploration on the ocean floor.

Jan 1, 1993

By Wilfred Lus

Meaningful and real time environmental monitoring of marine tailings placement is a clear sign of deeper commitment to the people of PNG in regard to impacts of mining on coastal environment and marine life. Today daily mine wastes and tailings are increasingly being delivered to the seabed offshore of project sites in Misima and Lihir islands. Ramu and Simberi mining projects also plan to dispose tailings out at deep sea. As tailings leave the tailings pipe and come out into the seabed, concentrations of the cations and other potential harmful particles in the tailings stream need to be quantifiably monitored each day during the life of the refinery. For continuous monitoring of the tailing?s true chemical characteristics submarine cables connected with ocean floor observation systems consisting of deep-sea underwater video, and cation sensors and electrodes will be laid. Power transport to the tailings site and data transfer from the tailings site will be via opto-electric cables. Various data center instruments will record and manage the collected data. Observation data will be transferred in real time to stake holder?s data centers via a dedicated line from on-land stations, and then distributed to company offices and government establishments. Japan Marine Science and Technology Center, Telikom PNG, and Australian Institute of Marine Sciences will be the key advisers in this project. The main role of the observatories is to monitor and collect background seabed geochemical data prior to start of tailings disposal, during tailings disposal period, and after the life of the refinery.

Jan 1, 2001

By Irina A. Pulyaeva

Hydrogenetic Fe-Mn crusts are ubiquitous in the ocean basins and play an important role in marine mineral-deposit research because of their widespread occurrence and high concentrations of valuable and rare metals. Directed research, which started in the last quarter of the 20th century, has provided significant results, with substantial amounts of data produced on Fe-Mn crusts structure, composition, and distribution in the global ocean. Detailed study of several seamounts has given confidence about the scale of Fe-Mn crust development and their characteristics. Now, commercial interests gain more and more attention. However, at the same time some theoretical questions related to Fe-Mn crust history including controls on metal sources and concentrations have not yet been answered. Here, we present the overview of age, composition, distribution, and geological setting of hydrogenetic Fe-Mn crusts from Pacific and Atlantic seamounts and discuss the geological evolution and conditions that led to the formation of potentially economic concentrations of metals. The age, composition, and distribution of Fe-Mn crusts in the Atlantic and Pacific oceans were determined by using a Fe-Mn deposits database compiled from our original data, published papers, published databases, and other international sources. Comparative analysis of Fe-Mn deposits from the Atlantic and Pacific oceans shows that there are similarities in basic characteristics of crust formation in both oceans. Simultaneously, there are significant differences in the scale of Fe-Mn crust distribution and composition that can be explained by differences in geological settings and characteristics of the deposition environment.

Jan 1, 2011

By Benjamin W. Haynes

The Federal government has a lengthy history in supporting and conducting research in the ocean mining and minerals field. The Federal effort has been and is currently focused primarily in four agencies: the National Oceanic and Atmospheric Administration (NOAA) within the Department of Commerce, and the Geological Survey (USGS), the Bureau of Mines (BuMines), and more recently the Minerals Management Service (MMS) within the Department of the Interior. While NOAA and the USGS have played dominant roles in mapping and geologic studies, and the MMS has recently provided funding for several task force studies within the Exclusive Economic Zone (EEZ) , the Bureau of Mines has conducted research in mining technology, minerals processing, resource definition, and economic evaluation of minerals from the seabed for over 20 years. These studies have yielded considerable minerals information regarding manganese nodules and crusts, placers, mineral sands, phosphorites, and sulfides. This paper reviews the past achievements in ocean mining and minerals programs starting in the late 1960's, describes current research and information efforts, and presents an outlook for Bureau of Mines research and information gathering efforts. Specific topics

Jan 1, 1989

By In Kwon Um

The XRF Core-Scanner system performs non-destructive analysis of elements from Mg to U, in concentrations of ppm levels on split cores with digital images. Using the AVAATECH XRF Corescanner system, we conducted high resolution element analysis of deep sea sediment cores from Clarion-Clipperton fracture zone of the northeastern Pacific to reveal recent environmental changes. Comparison of data estimated by the XRF core scanner with ICP-AES showed relatively weak correlation coefficients except Mn contents. Down-core variations of most elements seem to be matched with each other and reflect changes of sediment colors. Especially Mn/Al ratio significantly change at distinct color boundaries. The variations of Mn/Al ratio with sediment colors are suggestive of changes in redox condition and further divided into two types probably affected by activities of benthic organisms. Be isotope age datings of select core (BC08-02-13) indicate that the color boundaries are approximately coincident with late Pliocene and Pleostocene also early Pliocene and late Pliocene boundary. Keywords: XRF core scanner, High resolution, C-C zone

Jan 1, 2011

By Robert G. Ditchburn

Dating seafloor mineralization at hydrothermal centres of submarine arc volcanoes is important for understanding deep-seated volcanic events that can produce deposits rich in base and precious metals. The activity ratios, 228Th/228Ra, 228Ra/226Ra (Bq.Bq-1) and 226Ra/Ba values (Bq.g-1) are used for dating barite- rich seafloor massive sulphide (SMS) in the age ranges 0.3 ? 12 years, 3 ? 35 years and 500 ? 15,000 years, respectively. Thus, the time elapsed to amass an economic deposit and, ultimately, its capacity for sustainable extraction, can be estimated. 226Ra/Ba and 228Ra/226Ra values have been measured in relatively young chimneys that were collected, 1998 to 2006, from hydrothermal sites at Brothers and Clark volcanoes (Kermadec arc) and East Diamante volcano (Mariana arc) to check these initial ratios, essential for calculating ages for older mineralization at the same sites, were not varying significantly. We found that the 226Ra/Ba value for fresh SMS mineralization at the Brothers NW caldera and East Diamante hydrothermal sites have been reasonably stable for 6 years and 2 years, respectively. At both sites, the 228Ra/226Ra value for fresh SMS has been stable for 5 years. This was established from young chimneys where the measured 228Ra/226Ra value could be corrected for radioactive decay using the age derived via the 228Th/228Ra method. However, long-term stability of the initial 226Ra/Ba and 228Ra/226Ra values has yet to be proven. These isotopes of Ra are used as a proxy for better understanding of the transfer of Ba from deep magmas to the seafloor, via the circulating fluids of the hydrothermal system.

Jan 1, 2011

By Steven D. Scott

The 1991 PACMANUS Expedition (Papua New Guinea-Australia-Canada in the Manus Basin) discovered a very large (approximately 800 x 350 m) actively-forming seafloor polymetallic sulfide 4 deposit in felsic volcanic rocks of the southeastern part of Manus Basin, a 60 km wide extensional zone of basalt, andesite and dacite volcanism in the New Britain back arc. The apparent neo-volcanic zone is a 30-km long, high standing, Y-shaped edifice, which we have named Pual Ridge ("Pual" means "fork" in a local PNG dialect). The PACMANUS deposit was found by deep-tow video on Pual Ridge along the flank and adjacent valley of a dacite lava dome. Videos show large spires, chimneys and mounds with abundant fauna. Only two small samples from an active chimney were recovered. Their mineralogy is a high temperature assemblage of chalcopyrite, bornite, tennantite, sphalerite or wurtzite and anhydrite. The bornite and tennantite and silver rich. Gold values for the two samples are 2 and 10 ppm. A pronounced methane and particulate plume was traced in the water column for 14 km to the northeast of the PACMANUS deposit. Other deposits of unknown size are nearby. The deposits of Pual Ridge and their surrounding volcanic rocks have close similarities to ancient massive sulfides of Archean to Phanerozoic age in Canada and Australia.

Jan 1, 2011

By Hunsoo Choi

Internal textures of manganese nodules from Clarion-Clipperton zone of northeastern Pacific Ocean are classified into five textural zones: columnar-textured layered zone, cuspate-textured layered zone, cuspate-textured massive zone, cuspate-textured porous zone and massive- textured massive zone. Vernadite is the main constituent mineral in the columnar- and cuspate-textured layered zone. Buserite sometimes occurs in the cuspate-textured layered zone. The cuspate-textured massive zone is mainly composed of buserite. Todorokite is also associated with buserite in the massive-textured porous zone, where cuspates and globes are partially replaced by massive texture. In the massive-textured massive zone, todorokite, buserite and birnessite occur together. The analyzed elements of all zones are also classified into four elemental groups by the cluster analysis of correlation coefficients: Mn group, Cu-Ni-Mg group, Fe group and Si group. Mn group consists of Mn and K. Cu-Ni-Mg group consists of Cu, Ni, Zn, Mg and/or Ca, Na. Fe group consists of Fe, Co, Ti and/or Ca, P. Si group consists of Si and Al. Each textural zone is composed of three or four elemental groups. These four elemental groups are correlated with mineral composition, such as, Mn group with todorokite, Cu-Ni-Mg group with buserite, Fe group with Co-bearing iron-oxyhydroxide minerals, and Si group with silicates.

Jan 1, 2002

By Richard H. T. Garnett

Diamonds were discovered on the coast of Namibia in 1907 but it was not until 1962 that the first gems were produced from offshore by a barge employing an airlift. Geophysical surveys and a sampling program were initiated and an understanding of the diamond distribution was gained. Several vessels, some with multiple airlifts, were used until the early 1970's. Some spectacular production results were achieved, but generally the systems failed to retrieve the gravels efficiently from beneath the overburden and off the bedrock. Various companies continued working with mixed outcomes until the mid-1980's, when new regulations were enacted by the authorities. The local Southern sea conditions dictate the present mining methods which are now applied over several hundred kilometers of the west coast. In shallow waters divers operate from small vessels, suctioning the diamondiferous gravels to surface with gravel pumps. In water depths of up to 50 m airlifts of various designs continue to be utilized with recovery plants installed on the vessels. Beyond 100 m depths a remote controlled, tracked, vehicle is used, together with a large drill mounted on swell compensator. Each system is deployed from a separate ocean-going vessel. Production of diamonds from the offshore is rising rapidly, with expectations of further increases. The coastline is likely to be the scene of new developments in marine mining techniques.

Jan 1, 1992