Search Documents

The growth of the mining industry around Australia over the last ten years has seen many open cut mines developed on shallow oxide reserves. Most of these have been gold operations, although there are some copper mines in the list, too. Many of these have exhausted their oxide reserves and have made the transition to underground mining to access their deeper sulphide ores. Other operations have reached or are approaching the point where the decision has to be made to go underground or cease mining. This paper discusses the issues involved in making the transition from surface to underground mining. The aim is not to discuss each of the issues exhaustively. This would take a conference in its own right. Nor is it intended to provide a primer on underground mining. Instead the aim is, firstly, to flag the issues which must be addressed when planning to make the transition from surface to underground mining and, secondly, to identify critical aspects of mine development.

Jan 1, 1997

-in 1961,.West Australian Petroleum's Eneabba. No. 1 bore encountered twenty-two' seams of coal totalling forty feet in thickn' ss between the..'depths of 6373 feet and 64,/,1 feet. 0n'ana:lysis; this coal had a. similar calorific value (8000 - 9000 B.

Jan 1, 1964

During conventional eddy current separation, a repulsive force is applied to metallic particles by placing them in a rapidly changing magnetic field generated by a spinning magnetic rotor carrying an arrangement of alternate magnetic poles. This method works effectively for larger non-ferrous metallic objects, such as aluminium cans, but as the metallic particles become smaller, the bulk repulsive force on the particles is increasingly replaced by a rotational torque. Therefore, for small metallic particles it makes sense to use particle rotation, rather than particle repulsion, to effect a separation. Eddy current separators using particle rotation are similar in construction to present separators, but are designed to produce a rotating field of essentially constant angular velocity and field strength. Practical and economic particle rotation eddy current separations are possible down to particle sizes of about 200 ¦m, but separations, at probably uneconomic rates, can be carried out on particles as small as 50 ¦m.

Jan 1, 2000

This paper describes the characteristics of blasting which set it apart from other methods of breaking rock. The mechanism of rock breakage and the influence of rock proper- ties are then discussed. The strain and fragmentation produced by a cylindrical charge does not change once the charge is longer than 16 blasthole diameters. The influence of bench geometry, charge length and drill diameter are then examined. It is shown that spherical charges have advantages over long slender cylindrical charges. By selection of the appropriate drill diameter, explosive and charge configuration the optimum blasting practice for a given rock to give suitable fragmentation and muckpile profile for sub- sequent handling can be found. The fragmentat- ion depends not only on rock and explosive properties but also on the pattern which dictates how effectively the cracking is utilised. The size distribution of the fragments is given by the Rosin - Rammler equation. Undesirable cracking of the rock in the final wall can be controlled by the careful design of blasts as they approach the final wall. Finally, it is concluded that because of the distance to which blasting can fracture and then displace rock it is suited for the breakage of large volumes of rock.

Jan 1, 1978

IntroductionOre BodiesRio GrandeBlack RockLeadCopperBlack StarLeadCopperStoping Methods and DesignFactors Affecting Ventilation PracticeTemperatures and Climatic ConditionsGeothermic GntdlentLegal RequirementsMine CasesMain Ventilation SystemMajor Fans and ShaftsVentilation CircuitsMan and Supply Shaft; No. 2 Ore Shaft; Urquhart ShaftMan and Supply Shaft; Davidson Shaft; No. 46ShaftLawlor Shaft; Urquhart ShaftControl of VentilationSummary of Upcasts and DowncastsAuxiliary VentilationType of Fans used, Vent Pipe, etcVentilation and Temperature SurveysDust SurveysInstruments Used

Jan 1, 1953

By M Robotham

In April 2013, Rio Tinto Kennecott Copper’s (RTKC) Bingham Canyon mine experienced what is arguably the world’s largest ever in-pit slope failure. The failure initiated along a major, continuous, low-strength bedding fault, named the Manefay bed, and comprised approximately 145Mtonnes of rock and waste dump material. Initial East wall slope deformations were detected some months prior to catastrophic slope collapse by RTKC’s slope monitoring systems. However, the failure mechanism was different to that which had historically been experienced in the prior more-than-100 years of open pit mining. Failure occurred as two separate events, the initial one likely consisting of a frictional failure of rock materials along the Manefay bed itself, before a second phase of failure occurred, which included a large mass of old rail dump material. The combination of these events led to a much larger failure run-out than had been anticipated by the RTKC team which led to loss of, and damage to, mining equipment and infrastructure as well as significant interruption to mining activities. Due to the diligent monitoring of the slopes no safety impacts were experienced at the mine, and as such the details and learnings from this failure can readily be shared with the broader mining and geotechnical industries to avoid similar recurrences elsewhere. This is an extended abstract only. CITATION:Robotham, M, 2018. Bingham Canyon Mine – from adversity to excellence, in Proceedings The Fourth Australasian Ground Control in Mining Conference (AusRock), pp 3–4 (The Australasian Institute of Mining and Metallurgy: Melbourne).

Nov 30, 2018

The introduction refers to observations made in the early days of the Nationalisation of the Coal Industry in the United Kingdom, indentifying the underground transportation problems. Statistical information is presented, highlighting the considerable developments which have been made in recent years with an evaluation of the manpower and cost involvement.

Jan 1, 1985

The progress between 1983 and 1989 towards Management Guidelines for R16 was extremely slow and painful because protection of the mining heritage was a new function and administrative activity not referred to in any Queensland mining law. Also, until 2 December 1989 the Queensland political climate was anti-preservation. Therefore an understanding had to be achieved between John Hay, the Mines Department and the National Parks and Wildlife Service, to ensure preservation of the mining machinery in situ rather than being removed to a town site such as in Ravenswood.

Jan 1, 1990

By Dudgeon RN, Houston ML

When the original Mount Gunson joint venture,between CSR Limited and United Uranium N.L. ceased operations in December 1971, an intensive exploration campaign was launched to prospect for more ore in the Mount Gunson region. This campaign resulted in the dis- covery'of the Cattle Grid copper deposit. A comprehensive sampling pro- gramme including the sinking of over 200 diamond drill holes and two vertical shafts,proved the existence of 4.6 million tonnes of ore, at a mean grade of 2.4% Cu,calculated at 1.00% Cu cutoff.

Jan 1, 1975

Mineral exploration conducted over a wide area of the State during the period 1960 to 1973 has resulted in the discovery of a number of significant deposits. Base metals, particularly copper, have been of prime interest while, more recently, the search for uranium and coal have assumed import- ance. Expenditure of $27.6 million by companies during the period under re- view has located 580,000 tonnes of cop- per, 370,000 tonnes of zinc, 350,000 tonnes of lead, 24 million Kg of uran- ium oxide and 2,500 million tonnes of coal. A variety of other metals and non metallic and industrial minerals have been investigated in a diversity of geological environments.

Jan 1, 1975

The success of the In-Plant dust collection at the Albion Reid Quarry Plant situated at Para Hills, South Australia, is discussed in the light of co-operation at the design stage with particular emphasis on the duct- work and filter design. Other dust control facilities at the Plant are mentioned.

Jan 1, 1976

The processes most likely to be adopted for beneficiating ores or concentrator streams containing a large proportion of particles finer than 10 um are froth flotation, selective flocculation, wet magnetic separation and selective leaching. Flotation will be made more efficient for very fine particles if ways can be found to selectively flocculate the valuable mineral beforehand (floc-flotation), to produce smaller bubbles and to reduce entrainment of ultrafine gangue. Schemes for selective flocculation have proved difficult to implement because of the delicate balance between surface forces (electrostatic, dispersion, hydrophobic) and hydrodynamic forces, that determines flocculation, and the changes which occur to particle surfaces through hydrolysis, oxidation-reduction and cross-contamination between minerals in aqueous suspensions. The search for a better understanding of selective adsorption of flotation collectors and flocculants continues and will be particularly important for the practical success of selective flocculation and selective magnetic coating.

Jan 1, 1986

By Spark R. F

The copper deposits at Pernatty Lagoon are predominately djurleite-digenite bodies beneath the permanent water table, and chrysocolla-atacamite-malachite above the permanent water table. The minerals havebeen deposited as sheets, lobes, and pods in zones suggestive of permeability channels or permeability basius with respect to groundwater circulation.Pyrite is deposited in the form of framboids, which reflects its biogenic origin. Copper-iron sulphides deposit by replacement of pre-existent pyrite, and rarely by direct deposition. The latter mode of formation results in complex crustification bandings of chalcopyrite, bornite, sulphur rich bornites, digenite, and blue remaining covellites. The copper-iron sulphides appear to reequilibrate under constrained oxidation, resulting in an iron depletion and associated copper enrichment, the final product of which is a djurleite-digenite assemblage and associated with goethite. Where copper mineralization/ host rock relationships have rendered the rocks entirely impermeable to post ore groundwater movement, then the copper-iron sulphides are preserved as the ore assemblages.Minor and trace minerals observed include sphalerite, carrollite, galena, wittichenite, and possibly tetrahedrite in the primary ores. In the oxidized ores cllprite, tenorite, and trace brochantite have been found.

Jan 1, 1976

Exploring for deep shallow dipping orebodies can be very expensive and very difficult. Surface exploration is often not an option and obtaining the best location for underground drilling can cause production delays if drilling is carried out from development headings. The Otter/Juan mine has been in production for approximately 34 years. All of the production is now sourced from more than 1000 metres below the surface from an area known as the Edwards Lode. The orebody is shallow dipping and open at depth. Exploration drilling has been performed from decline stockpiles and from hangingwall drill drives. Drilling from footwall positions (eg decline stockpiles) into shallow dipping orebodies can often produce intersections which are unusually thick thus leading to optimistic resource figures. The decision to develop a dedicated hangingwall drilling position can vastly improve the quality of the data used to generate an orebody model. In 1997 a new extension to the Edwards Lode was discovered and named the æFÆ surface. In 1999 a resource calculation was performed using data obtained from drilling that was carried out from decline stockpiles. In 2002 a dedicated drill drive was developed into the hangingwall of the æFÆ surface to obtain better data to verify the previous resource calculation. For this case study obtaining more representative data reduced the resource estimate by 66 per cent. This information was obtained early enough to allow for alteration to the mine plan and without loss of capital.

Jan 1, 2003

Mount Isa Mines operates Hewlett Packard 1000 computer systems for process control in its major mineral processing plants. To simplify control systems implementation, a process control software package has been developed. This package is now used at the Lead/Zinc Concentrator where the HP computer is interfaced to Foxboro Interspec/Spec 200 system and Honeywell TDC 2000 front-ends. The HP computer controls crushing, grinding, flotation and tailings disposal. This paper outlines the development of process control systems at Mount Isa Mines. The creation of the process control package is described and the reasons for its development highlighted. The application of the software package and the implementation of process control systems at the Lead/Zinc Concentrator is detailed.

Jan 1, 1978

By Dunlop G. A, Cantrell R. A

The metallurgical and engineering requirements that form the basis for planning column flotation Pilot Plant testwork are reviewed. Pilot plant operating issues are discussed and a basis for the testwork program formulated. The application of the testwork results to engineering design and scale-up is briefly reviewed.

Jan 1, 1992

By Gillies A. D S, Supriyadi

The landed cost of coal to the international customer is a major parameter which determines market competitiveness. Rail, port and shipping charges represent 30 to 50 per cent of landed costs for Australian mines selling to Asia. This prop

Jan 1, 1994

By Forssberg KSE

Purification of GAsgruvan Limestone is carried out by anionic, cationic and cationic followed by anionic flotations in order to obtain a calcite concentrate that is acceptable to the paper industry. The results indicate that such a concentrate could be achieved by first carrying out the separation of siliceous gangue minerals by cationic flotation followed by the separation of carbonate during the anionic flotation. Stearylamine acetate (Flotigam SA) and a modified fatty acid (OMC 357) are found to be selective during cationic and anionic flotation, respectively. A final product containing 99.25 per cent calcite with a recovery of around 80 per cent is obtained. It is hoped that these results could be further improved by the follow-up process variable studies, in particular, the effect of reagent dosages and conditioning time at each stage of cationic and anionic flotation steps.

Jan 1, 1993

The coal under the ridgeline is the most valuable part of the known reserve at Solid EnergyÆs Stockton Opencast Mine. Some ridgeline mining had been attempted in the past with mixed results. Solid Energy recognised that significant project planning was required in order to overcome the formidable technical issues associated with mining the area. It also recognised that the local community also had concerns about the potential impacts of this work including the visual impact of changing the topography of the ridgeline and the nearness of the Department of Conservation estate.   This paper outlines some of the risks and challenges that were faced and the management approaches that were adopted to address them.

Jan 1, 2007

By Slattery T. E

Recent develognents in zinc flotation at the North Broken Hill Limited concentrator are discussed. An outline of the history of zinc flotation and a description of current practice is presented. Installation of on-stream X-ray analysis probes has resulted in inproved metallurgical performance and focussed attention on automatic control. Results are presented of investigations made over the past six years which have led to the formulation of experimental schemes for the automatic control of zinc flotation.

Jan 1, 1983