Search Documents

The thirtieth regular meeting of the Rocky Mountain Coal Mining Institute was called to order at 11: 20 o'clock A. M., Wednesday, June 3, 1931, President G. A. Kaseman presiding: PRESIDENT KASEMAN spoke in part as follows: I have in mind to say a few words of welcome to the coal operators, but I am afraid that the words I might have said would be hardly appropriate, because I believe the coal operators are in the minority today. It demonstrates to my mind something that has been running through it for some little time. When the hard times came on a year ago, we thought we were going to get over it rather lightly. I recall at this time a year ago we thought that the depression was about at an end. The National Administration from Washington told us we had reached bottom and things were going to perk up, and for a few weeks or maybe a month or more there was a sort of optimism throughout the country. I had been East, and when I re- turned to Albuquerque I said to my friends and associates that things were getting better in the East and that they would soon be better out here and we will not have felt the hard times very much. But I have learned differently since. I have learned that hard times are no respecter of communities or corporations, or persons, or activities, and that we all suffer alike. On that account we find that our Institute is suffering just the same as other activities, whether national, state, local, social, or what- ever it may be. Our attendance is light or, that account. We all know when times are hard we have to stay at home and watch things closer than when they are good. And when they are good we feel that the machine will run of its own momentum and in this way we can get away to see what is going on in the world. When times are hard we have to stay at home and look after everything from day to day and hour to hour.

Jan 1, 1931

By A. C. Watts

The question of disposition of the slack and dust so troublesome to coal mine operators of the West has been divided by your committee chairman into three heads, viz: The preparation and transportation of fine and powdered coal. The developments along the line of low heat carbonization. The uses to which fine and pulverized coal have been put. The development of low heat carbonization has been assigned to me. This is really not a part of the subject but as it has a most important bearing on the future use of coal, I presume the chairman thought best to include it. An English committee on smoke abatement makes the statement that the burning of raw coal is "dirty, wasteful and unscientific". I will go a step further and characterize it as an "economic crime." It has been predicted by eminent scientific men that eventually no raw coal will be burned for heat or power purposes. All this will take time, experimentation and large expenditure, but it will surely come. The question of disposition of slack and dust so troublesome to coal and utilization of its by-products has been retarded by the abundance and cheapness of the raw coal, and by the abundance of suitable coking coals for metallurgical purposes. But necessity is surely, if slowly, demanding that the enormous waste ensuing from the burning of raw coal for heat and power must cease. For instance, smoke abatement investigations in Manchester, England, showed that the increased cost of household washing was about $1,250,000 per year due to smoke and soot. It is estimated that in London 200 tons of soot and smoke particles are suspended in the atmosphere over that city during dense fogs and that much more than this is emitted from the chimneys each winter day during the forenoon. As an example of what benefits a smokeless fuel gives, it is cited that in the mill town of Shaw, England, the burning of smokeless fuels in the factories has reduced the so-called fogs by about 80%. Necessity, caused by the war led Germany into the field of low tem¬perature carbonization because of the shortage of motor fuel and lubricating

Jan 1, 1922

The nineteenth regular meeting of the Rocky Mountain Coal Mining Institute at Rock Springs, Wyoming, was called to order in conjunction with the Wyoming State Safety and First Aid Meet, at 2 p. m., Thursday, August 7, 1924, by President William Littlejohn of Castlegate, Utah. Meeting opened by invocation by Father Welsh. Address of Welcome by Mayor P. C. Bunning and key to city presented to President Littlejohn. Response to address, of welcome made by President Littlejohn. Minutes of the last regular meeting read and approved. Report of officers: Financial statement by Secretary-Treasurer Shubart, who stated that there was $1,225.68 in the treasury and requested that the report be referred to an auditing committee for examination and approval. Motion by Mr. Pryde that the report be referred to an auditing committee. Seconded by Mr. Robinson. Carried. A committee of three, consisting of Messrs. Murphy, McKeehan and Gibson, were appointed by President Littlejohn to examine the report, and approve it. As no time was found during the meeting, the Committee was instructed to report later by mail. Report of Standing Committees: Mr. Pryde stated that the report of the Safety Committee would he presented at the morning session, August 8th. Report of Special Committees: None. Unfinished business: President Littlejohn stated that some action should he taken on the interchanging of certificates in the four states of New Mexico, Colorado, Utah and Wyoming. A committee should probably be appointed from each of the states, and the matter left in their hands to try if possible to get their legislators to put some law into effect which will make the certificates in all these four states interchangeable. President Littlejohn also stated that the subject had been brought up, through correspondence, of changing the emblem of the Rocky Mountain Coal Mining Institute, which is the old oil lamp, and that he had had a letter from Mr. C. M. Schloss, who stated that inasmuch as the old oil pit lamp was symbolic of mining it should be retained so that unless someone had any

Jan 1, 1924

By D. Harrington

At the time of mine accidents one frequently hears the expression "there will be accidents as long as there are mines", or it may be varied to state that the accident in question was unavoidable, or something similar indicating inability to prevent accidents. However, it is the opinion of the writer, after over twenty-one years experience in both coal and metal mining, seven years being spent wholly in safety work, that by far the greater number of all accidents is due to carelessness or negligence. This carelessness or negligence may be on part of the victim of the accident or of one of his companions, or on part of his employer or possibly even of the inspector or safety man, and in some cases all of these agencies are involved. It manifests itself in various guises, one of the most serious being violation of state mining laws or regulations or of mine rules, and frequently the rules of ordinary common-sense. The cause very frequently is that trait in human nature to "take a chance" and it has been the writer's observation that the worst offender is the old-time miner who has come safely through many years experience, who was mining when the "safety man was a baby", and who clings to old-time ideas and practices and has "no use" for "newfangled" present-day "notions". Unquestionably, there are accidents, wholly unavoidable and many are caused by ignorance and by the new-comer in mining, yet as previously indicated, the writer's observation is that the old-timer is by far the worst offender, bringing grief to himself, companions and employer. Of the numerous manifestations of carelessness and negligence in connection with mine accidents, which have come to the notice of the writer, only one will be treated in this paper, viz: Violation of State Mining Law, and mention will be made only of explosions and major accidents in coal' mines with which the writer came in personal contact as investigator. In most cases, in addition to mine inspection after the accident, the writer heard the evidence given at Coroner's inquest and thus was enabled to for¬mulate fairly definite impressions as to events and conditions leading up to the occurrence.

Jan 1, 1922

[W. R. Abbott, 11o8 First National Bank Bldg., Denver, Colo. L. E. Adams, 817 Newhouse Bldg., Salt Lake City, Utah. Herbert Addison, Big Horn Colliers Co., Denver, Colo. Richard V. Ageton, Brighton Mich. John Alexander, Dacona, Colo. C. A. Allen, 448 Capitol Bldg., Salt Lake City, Utah. David Allen, Lafayette, Colo. John Allen, Ludlow, Colo. Thomas Allen, Mt. Harris, Colo. Gerald Alley, C. F. & I. Co., Pueblo, Colo. Archie Allison, Box 562, Walsenburg, Colo. D. S. Allison, 56 W. 6th South Street, Salt Lake City, Utah. Park Allison, Box 94.0, Rock Springs, Wyo. Howard R. Allonier, care Lunkenheimer Co., Cincinnatti, Ohio. J. B. Ambler, care Ambler & Riter, Engineers, Salt Lake City, Utah. A. F. Anderson, 403 Ideal Bldg., Denver, Colo. W. K. Anderson, 4.23 East Yampa Street, Colorado Springs, Colo. Sam Andrews, 503 Pike Avenue, Canon City, Colo. Jos. Angster, Farr, Colo. William Angus, Somerset, Colo. Joseph Appleton, Ironton Engine Co., Ironton, Ohio. Victor Arnoldi, Ideal, Colo. John Arnott, Crested Butte, Colo. R. M. Atmore, Swastika, N. M. W. H. Backman, 1601 Alcott Street, Denver, Colo. Edward E. Barrett, Roberts & Schaefer Co., Chicago, Ill. G. F. Bartlett, 311 Ernest & Cranmer Bldg., Denver,, Colo. C. S. Beach, Kemmerer, Wyo. Thos. Bertram, Box 134?, Oak Creek, Colo. Charles Beuchat, Pryor, Colo. John Bevan, 1625 North Corona Street, Colorado Springs, Colo. James L. Bisch, Van Houton, N. M. Jos. Bodner, Oak Creek, Colo. A. H. C. Boissier, 302 E. & C. Bldg., Denver, Colo. John M. Bopp, 1615 Walker Bank Bldg., Salt Lake City, Utah. Edward Bottomley, Carneyville, Wyo. James V. Bowen, Union Coal and Coke Co., Denver, Colo. Alex R. Bowie, Bowie, Colo. John S. Bowie, Bowie, Colo. Wallace D. Bowie, Bowie, Colo. W. J. Bowns, Castle Gate, Utah. L. Brandenburger, 59 West Broadway, Salt Lake City, Utah. James Brennan, Primero, Colo. W. D. Brennan, Dawson, N. M. Burt B. Brewster, 704 Kearns Bldg., Salt Lake City, Utah. A. L. Brockman, Sugarite, N. M. Alex. J. Brooks, Supt. Hastings No. 5 Mine, Hastings, Colo. Edward Brooks, Sweetwater, Wyo. E. S. Brooks, Rock Springs, Wyo. D. W. Brown, Rocky Mountain Fuel Co., Denver, Colo. L. E. Brown, 1212 Walker Bldg., Salt Lake City, Utah. Mark Y. Brown, 629 East Main Street, Trinidad, Colo. H. H. Bubb, Carbon Coal and Coke Co., Cokedale, Colo. W. H. Bullock, 1052 Gas and Electric Bldg., Denver, Colo. Thomas B. Burnite, 523 Boston bldg., Denver, Colo.]

Jan 1, 1921

[Addison, Herbert Big Horn Colleries Co., Colo. Bldg., Denver, Colo. Aleshire, N. C c-o Roberts & Schaefer Co., Wrigley Bldg., Chicago, Ill. Alexander, John Dacona, Colo. Allan, David Lafayette, Colo. Allen, John Ludlow, Colo. Allen, Thomas Box 420, Glenwood Springs, Colo. Alley, Gerald C. F. &I. Co., Pueblo, Colo. Allison, ArchieBox 562, Walsenburg, Colo. Allison, D. S 1331 Roberta St., Salt Lake City, Utah Allison, Park Engineer, Standard Coal Co., Standardville, Utah Allonier, Howard R c-o Lunkenheimer Co., Cincinnati, Ohio Ambler, J. B c-o Ambler & Riter, Kearns Bldg., Salt Lake City, Utah Anderson, A. E 403 Ideal Bldg., Denver, Colo. Andrews, Sam 503 Pike Ave., Canon City, Colo.. Angster, Joe Walsen, Colo. Angus, William B. W. Snodgrass, 1575 Lafayette St., Denver, Colo. Apperson, A. B Tramway Bldg., Denver, Colo. Armstrong, C. D Apperson Vallery Co., Tramway Bldg., Denver, Colo. Arnoldi,, Victor Ideal, Colo. Autrey, J. S Perrenaud Apts., Denver, Colo. Bachman, W. H 1601 Alcott St., Denver, Colo. Bailey, R. E Utah Power & Lt. Co., Kearns Bldg., Salt Lake City, Utah Baird, Elmer A Equitable Bldg., Denver, Colo. Bartlett, G. F 311 Ernest & Cranmer Bldg., Denver, Colo. Baxter, John M 3748 Lafayette St., Denver, Colo. Becker, J. A Box 682, Rock Springs, Wyo. Beebe, John. D 1414 Court Place, Denver, Colo. Bennett, F. C Colorado Fuel & Iron Co., Berwind, Colo. Benson, Geo Cumberland, Wyo. Betcher, B. L Standardville, Utah Beuchat, Charles Pryor, Colo. Bevan,John 1625 North Corona St., Colorado Springs, Colo. Bisch, James L Van Houten, N., M. Boissier, A. H. C Boston Bldg., Denver, Colo. Bottomley, Edward Kleenburn, Wyo. Bowen, James V Union Coal & Coke Co., Colorado Bldg., Denver, Colo. Bowie, Alex R Bowie, Colo. Bowie, John S Bowie, Colo. Bowie, Wallace D Bowie, Colo. Bowns, W. J Castle Gate, Utah Boyer, F. E 631Jackson St., Denver, Colo. Boyle, Chas Sweetwater, Wyo. Brandenburger, L 59 W. Broadway, Salt Lake City, Utah Brennan, W. D Dawson, N. M. Brewster, Burt B Walker Bank Bldg., Salt Lake City, Utah Brockman, A. L Sugarite, N. M. Brooks, Ed 513 Second St., No. 1 Hill, Rock Springs, Wyo. Brown, Geo. A Cumberland, Wyo. Brown, L. E :.1212 Walker Bldg., Salt Lake City, Utah Brown, Mark Y 629 East Main St., Trinidad, Colo. Bubb, H. H Cokedale, Colo. . Bullock, W. H 1052 Gas & Electric Bldg., Denver, Colo. Bunning, P. C Rock Springs, Wyo. Burnite, Thomas B 523 Boston Bldg., Denver, Colo. Butler, T. H Hanna, Wyo.]

Jan 1, 1924

The ninth annual Mine Rescue Evaluation was held in conjunction with the RMCMI 2000 convention at the Sheraton Tamarron Resort, Durango, Colorado June 25 thru 27. The purpose of the mine rescue evaluation program is to provide an opportunity for mine rescue teams to learn new skills and improve their existing ones in a non-competitive environment. Several staged "disaster" scenarios were [ ] held where the teams are called upon to exhibit their life saving abilities. The evaluators meanwhile are offering suggestions, both verbal and written, to help the teams better understand the situations presented them. This non-competitive environment allows the teams to work together and share their knowledge with fellow mine rescue teams providing everyone with a positive learning experience. Mine Rescue Chairman Bill Balaz was in charge of coordinating the events. Seven teams consisting of seven to ten members each (totaling 63 members) participated in the two-day event. Each team was required to respond to three different real-life scenarios plus a written general knowledge test daily. This year's four professional evaluators included Art Saenz (Hazardous Materials) of Western Envi¬ronmental Associates; Guy Horton (Ropes), Guy Horton Rope Rescue; Mary Bailey (Medical), MBA Training and Ron Lauer (Confined Space) also lassos Western Environmental Associates. They cash prov- [ ] ided three different challenging mock situations per day per team. The teams had no prior knowledge of what the scenarios would be as details were provided only as they arrived. Ten volunteer victims added much drama and excitement to the event. Their realistic enactments, complete with false blood makeup and severed limbs, made for some very tense scenarios. The Mine Rescue Teams participating this year were BHP LaPlata, BHP Navajo, BHP San Juan, all from Farmington, New Mexico; Bridger Coal Co., Rock Springs, Wyoming; Sabine Mining, Longview, Texas; Solvay Minerals, Green River, Wyoming and Western Energy Co., Colstrip, Montana. Many new [ ] friendships were made and much knowledge shared. A swap meet was held Saturday afternoon for the teams to exchange miscellaneous equipment, hats, shirts, etc. The teams were asked to evaluate the program and the evaluators. Then responded with many positive suggestions that will help improve the upcoming events in the years to come. Culmination of the Mine Rescue program was a Tuesday morning awards breakfast where the teams were presented with plaques. The participating victims and evaluators were also commended for their outstanding efforts. Sponsors for the Mine Rescue program were Big Sky Coal Company, CMC Rescue, Magnum Metals, Inc., and Rocky Mountain Electric. Many hours of volunteer time and effort from various family members of participants helped make the 2000 event a huge success.

Jan 1, 2000

By David Griffiths

I am' not an orator and have never said a word in public during my thirty years' experience in the coal mines of Colorado; but, being requested to speak by our worthy chairman, and as I am deeply interested in the future welfare of this organization, I will make an effort to say a few words in behalf of the Rocky Mountain Coal- Mining Institute, which we are about to organize. As I understand it, it is the object and intent of this organization not merely to assemble occasionally for the purpose of discussing various problems in coal-mining, and thus to obtain the best possible results in economic operations, but its especial duty will be to devise ways and means whereby accidents in coal mines will be minimized. Figuratively speaking, we are about to plant a tree in the State House of Colorado, and desire its roots and branches to extend over Wyoming on the north, New Mexico on the south, and Utah on the west. So we expect this tree to bear fruit over a vast area. .We must remember that the planting of a tree, even in good soil, is useless unless we cultivate, prune, and nurture its development. If we will not do so, the tree will not bear the desired fruit. So, in order to make the Rocky Mountain Institute a success, we must not only start it off in good shape, but we must keep on adding to its strength in various ways, so that it will become a known factor and a recognized power over this broad teritory. In other coal-mining states and countries of the world much has been accomplished through similar organizations to reduce loss of life among, men engaged in the production of coal, and there is no reason why our institute in the West should not be equally useful and attain the same results. There are many ways by which this organization can be made beneficial to the men engaged, in various capacities, in handling the "dusky diamond.' I will endeavor to confine my brief remarks to the necessity of a crusade of an educational nature among three classes of men that are directly and indirectly connected with coal mines. First-We need to educate ourselves. It is amazing how few of our number, holding positions of trust, and having charge of men in and around coal mines, are conversant with our brief mining laws and cognizant of our duties in enforcing them. Going down the line to our company men and miners, I think I can safely say that not over 5 per cent of them are in any way familiar with the statutes

Jan 1, 1913

By E. R. Gibson

It is quite generally conceded that the coal mining industry is among the most progressive in the adoption of modern and efficient equipment and mining methods, but most woefully antiquated in many respects in the matter of systematic accounting. The cause of this condition is problematical, but is usually thought to be due to false economy. We realize that those who do not understand accounts, or like accounting, are inclined to be disdainful of accounts and statistics, and to under-estimate the benefits derived from the expense and labor involved in proper accounting. The business that is run without a proper accounting system is subject to haphazard financing and courts disaster. Furthermore, the operator who disposes of his product without due regard to the requirements of the industry as a whole, as reflected in the cost of doing business, is an unfair competitor. No one will deny that the possible production of coal in the United States is much in excess of the demand. While it is true there is an occasional shortage in certain localities, it is due to temporary abnormal conditions which are overcome in a short period of time, when the mines are again obliged to take idle time, and herein lies the danger, not alone to the operator who neglects to keep informed as to operating costs; but to his competitor as well. While physical conditions and operating methods differ materially, accounting methods must likewise differ in some respects, but irrespective of how the result may be obtained, a true statement of cost is absolutely essential. Daily cost statements may be preferred by some, but have proven unsatisfactory, generally speaking, because of variation in production as well as in both labor and material expense from day to day; therefore, we will confine our attention to a monthly cost statement. To be most effective, operating cost statements should be prepared and submitted to the officers as soon after the close of the month's busi¬ness as possible, to enable them to remedy any defects in the operations that might be discovered by an analysis thereof. Opinions differ materially with respect to the most efficient method of compiling and the distribution of labor and material. The writer believes that a time book which provides space in which to enter the number of hours worked each day of the month by each employe, together with distribution thereof, is the most accurate, simple and complete. This record will show the service performed by an employe each day of the month and the account to which same is properly chargeable. This, of course, refers only to the employe working by the-day or month. While there can be but little said concerning the compiling and distribution of miners' wages, as the weighman's bulletin used almost

Jan 1, 1921

(The following discussion took place on this screen lecture in the dark.) MR. SHUBART: Would you give us a little .explanation as to the operation of this machine and what you are doing with it? MR. TESCHER: There is a 20- horsepower motor, rheostat, crusher, and a fan mounted on one base plate and operating on one shaft. The fan is overhung on the shaft. The only bearings you have are the bearings on each side of the crusher and the motor hearings. On one side of the ma- chine there is an opening for feeding shale. The machine is operated at 1,200 revolution per minute and as the shale is pulverized, the fan automatically exhausts fine dust from the crusher from an opening in the top of the crusher. The machine pulverizes 3,000 pounds in eight hours, reducing the materid to one hundred mesh. The last ma- chine we put in has been operating continuously fifteen hours a day for the past sixty days, without repairs of any kind. PRESIDENT LITTLEJOHN: Where is the machine in operation? MR. TESCHER. At the Royal mine. We have used ordinary mining ma- chine cable in local movements of the machines. This has enabled us to have twenty-two locations throughout the mines. The mine is highly gaesous, and the machines had to be placed on intake air. MR. SHUBSRT: What type of crusher do you use? MR. TESCHER. A No. 16 Universal, operating at 1,200 revolution per minute. M. SHURART: What material do you feed to it? MR. TESCHER: We have shale three-quarters of a mile from the mine. In the winter months we have been troubled with moisture. We build a kiln and get this shale and load it into the kiln for drying and then place it into a pit car and take it into the mine. The material must be dry. We have also used slate in the mine and have had good success. The slate at the mine is fairly hard. I presume, however, that the slate will probably carry a high silica content. MR. SHUBART: Mr. Harrington claims that silica does not do the harm, as was formerly supposed. MR. TESCHER: There is still a question as to whether it is harmful or not. PRESIDENT LITTLEJOHN: Are there any of these machines in operation closer than Aguilar? MR. TESCHER: There is one at the Alamo mine. Mr. Quealy also purchased a couple of them for use at his Wyoming mines. PRESIDENT LITTLEJOHN: Are there any other questions you would like to ask Mr. Tescher regarding his rock dusting machine while it is on the table for discussion? MR. DALRYMPLE, SR.: How many men does it take to operate it? MR. TESCHER: One man operates the machine. Sometimes we put the

Jan 1, 1925

By R. S. Morton

MR. CHAIRMAN AND GENTLEMEN: To be invited to address the members of The Rocky Mountain Coal Mining Institute on a particular subject is an honor I sincerely appreciate. The subject of this paper is, ?The Advantages of Having Such Men as the Fireboss Under State, Rather Than Corporation Jurisdiction." On the fireboss, primarily, depends the safety of the mine. When all the rest of the mine workers are still comfortably sleeping in the wee small hours of the morning the fireboss steals noiselessly away, from his bed to take up his daily task, a tour of inspection. He enters the mine, he inspects alone they workings that will be filled with men whose safety is in his keeping. Loyal to his fellow men and responsibilities of his position; he seeks for danger in every place, on every road and travelingway; going over caves, through dangerous places where none of the others are expected or allowed to go alone. How many of us give a thought to these dangers and the faithful work that this guardian performs for our safety. After the fireboss has made this round of inspection, he reports all the dangerous places to the foreman and enters them in the book; he is supposed to have performed his duties; he has no authority to enforce his recommendations. He has found a number of rooms that have not been timebered as they should be for the safety of the digger; he has told the diggers to they timber, up better for their own safety; he has kicked to the foreman about these same places. These conditions. continue until there is an accident. The fireboss reports, broken crossbars or bad roof on a roadway or some other danger to the foreman, but the foreman does not have it fixed, making, excuses, as he cannot put any one on that work today; or that it will stand until some idle day, and that is the way things go until the fireboss gets so he wonders what good he really is, is it any wonder it is hard to get good men to take this position of fireboss? The remainder of the shift the fireboss is used as a general roust-about, having to do such, work as building stoppings, help the timberman or track layers, pull rails out of danger in pillars, a trapper is off and he is told to trap that day, when the mine is idle he is laid off to cut expenses. That is the way the fireboss is treated. The fireboss is not merely a merely a necessity to be lightly regarded but a factor whose authority should be unquestioned. The fireboss has made his district and knows just what conditions the workings are in, and sees lots of dangers that the foreman does not. In the morn-

Jan 1, 1921

MR. STOUT: The picture shows the plan of the "V"-system as worked at Berwind mine, in a small strip of coal adjacent to the 4th right entry. The dotted line (indicating) show the position of the break rows as set for each of the three consecutive breaks. In two cases the break rows failed to function properly and as a result, the roof caved along the points of the "V's" as well as back along the faces a short distance. This affected the ventilation to a certain extent, but was remedied immediately by cutting through the points near the cave and setting additional timbers. At the present time we are putting in the break row of heavy red spruce props, making the row straight instead of curved as is shown in the picture; in this way we believe we can better control the breaks. The three "V" entries were driven up 14 feet wide, for a distance of 260 feet without cross-cuts. A very neat and substantial line brattice was carried up each entry as the places advanced. The principal factors in determining the success of this system are ventilation, roof control, and transportation. We are well pleased with the results from these three "V" places and now have four other places, about 500 feet to the west of these, driving at the present time in which we hope to get still better results. A MEMBER: What centers did you use there? MR. STOUT: We used 70 feet. This may be increased or decreased according to local conditions. MR. F. W. WHITESIDE (Chief Engineer, Victor-American Fuel Co.) Will you please describe roughly how your cars are handled? MR. STOUT: Cars are brought from the parting and pushed up along the faces by a storage battery locomotive. The faces are about 70 feet long and we found that five or six cars can be loaded and transported very conveniently. It is important to get a quick exchange of cars, and in this way we were able to keep the shovelers busy at all times. A MEMBER: What is the grade in your "V" entries? MR. STOUT: Five per cent in favor of the loaded trip. A MEMBER: What is the angle of your "V" faces? MR. STOUT: The angle at the throat is 45 degrees. MR. SAMUEL ANDREWS: In what direction does the air travel? MR. STOUT: The air travels down the dip entries and is deflected up the first "V" entry, and travels along the points, and returns down the last entry. There is no more difficulty in ventilating "V" faces than in ventilating rooms, providing the points are kept open. A MEMBER: What amount of air do you have in that section? MR. KAISER (Superintendent, Berwind Mine): Eighteen thousand cubic feet per minute. MR. ANDREWS: It is necessary, Mr. Stout, to brattice these places?

Jan 1, 1925

The meeting was called to order in the Albany hotel, with the President, John B. Marks, in the chair. At the request of the Secretary, the chairman brought before the Institute the question of a reorganization of the finances and system of conducting the Institute, explaining that, although the Institute is in good financial shape and the meetings are of great interest and are attended by a large and serious minded membership, the Institute is getting so large and of such value to the operators that it should be taken over by the operators, conducted by some man elected by and from the operators, and its financing put on a definite basis. At present, it was explained, the Secretary, not a coal operator nor interested in operating, arranges and conducts all meetings and finances the Institute from three sources: the very low dues, the advertisements published in the Proceedings, and by direct solicitation of contributions among the supply and machinery houses. Mr. James Dalrymple spoke vigorously on the need of having the Institute entirely free from any taint of commercialism. Upon motion by W. D. Brennan, seconded, a committee of four, one to represent each State, was voted. Appointment of this Committee was deferred temporarily. The reading of the minutes of the previous meeting was then called for, but upon statement of the Secretary, that the minutes were published in Volume 2 of the 1925 Proceedings, they were dispensed with. The Secretary-Treasurer's report was made informally inasmuch as the last report had not yet been audited. In brief, the Secretary reported on a cost of approximately $1,600.00 a year to publish and send out the Proceedings, an expense of approximately $1,800.00 to care for the Denver meeting, and an expense of approximately $1,200.00 to care for the summer meeting. The Secretary's salary of $25.00 a month has not been collected, but a certain portion of this has been used for stenographic expense. The Secretary asked for expression from the floor regarding the advisability of continuing the publication on the present elaborate plan. Mr. Gibson, Mr. Marks, Mr. Whiteside, Mr. Littlejohn, Mr. Dick and others spoke positively on the value of the present form of the Proceedings, and urged that no changes be attempted in this. Upon motion of Holbrook Mahn, it was moved, seconded and carried that E. H. Weitzel and W. F. Murray be made life members of the Institute in recognition of their services in the organization of the Institute, placing them with Floyd W. Parsons as the original organizers of the Institute. Mr. Murray spoke briefly in acknowledgment of the courtesy. Mr. Weitzel's words are included in the discussion A letter was read from George B. Pryde relative to the present emblem of the Institute. Upon motion by Mr. C. W. Sinclair, seconded by Mr. Dalrymple, it was moved that the consideration of a new emblem be

Jan 1, 1926

By Sam Andrews

Mr. President, Officers and Members of the Rocky Mountain Coal Mining Institute: This is my first attempt to prepare and read a paper before your association. The Rocky Mountain Coal Mining Institute, I understand, was formed for the purpose of increasing knowledge relating to coal mining in all its various branches by study, research and discussion. In writing my paper, I have tried to be as practical as I can, at the same time, present my arguments so that they can be easily understood. When I use the word science, I mean organized common sense. I humbly ask my hearers to be a little patient, while I read my paper, and be "to its faults a little blind, and to its virtues a trifle kind". Western Europe is said to be the cradle of the coal mining industry. We are told that the Ancient Britons were acquainted with the use of coal long before the Romans invaded and conquered their country. The Romans were never too proud to learn from the outer barbarians, and possibly acquired the precious secret from them: We are told that it was not until the 13th century, that the coal mining industry, assumed any noticeable importance in Britain, and on the Continent. In the year 1259 Henry the 3rd granted a charter to the freemen of New Castle on Tyne, allowing them to mine coal. For a long time it was used in the arts and manufactures only, wood continuing to be the common domestic fuel. As has been the case with almost every great benefit, the introduction of coal as a fuel was stoutly resisted at first, and we find its use prohibited in the city of London in the reign of Edward II, by Royal proclamation ; which was soon discovered to be injurious and foolish, and consequently withdrawn. It is interesting perhaps, to know how this Royal proclamation was brought about. A lady of the Royal household was riding in her coach one day through a village in which coal was burned as a fuel, and she suffered such a cough by inhaling the coal smoke that she decided to call a council of suffragetts, who ultimately decided that the burning of coal was injurious to their health and complexion. They drafted out a petition and presented it to the king, who speedily issued the order that no coal was to be burned in the city of London. The penalty for disobeying this order was death by hanging. We are informed of one poor man who continued to burn a lump of' coal on his fire in winter time; he was arrested, sent to prison and condemned to death; the judge in passing the sentence solemnly stating that if he was not allowed to get a fire that was hot enough in this world, he felt that he surely would be allowed one in the next.

Jan 1, 1921

By Eli Follett

It is indeed gratifying to note the marked improvement in the methods used in the coal- mines today compared to the methods in earlier days. Away back in the decade of 1900 to 1910 many of the mines were conspicuous for their absence of sprinkling and humidifying systems, as a result much of the natural moisture was absorbed by the dry air current and carried out of the mine and the mine was left dry, dusty and dangerous. This dangerous condition was intensified by large accumulations of fine coal dust on the haulageways where fire flashed from poorly lubricated rollers and bullwheels-trip riders used a torch with a flame reaching to the back of their necks, and large supplies of blasting powder were kept in the mines. Accidents and disasters were very frequent as we, in our ignorance flirted with danger. Staggered by the numerous accidents, and the nature of them; men began thinking along lines of safety, they worked out schemes and after many disappointments succeeded in having, some very whole some legislation enacted covering coal mining operations only to find that much lawlessness was still being practiced by the miners whom they sought to protect; step by step these safety men forged ahead, enlisting the co-operation of a few men about the mine whom they called a safety committee, until, today, we have an ironclad mining law which all have to respect. We have sprinkling and humidifying systems, the miners electric lamp, permissible explosives and many other devices making for greater safety in the operation of our coal mines. Our mines are no longer veritable gasometers and powder storehouses, as I. knew them to be in South Wales, Britain, where I started to work in the mines. Instead, the mines of this day are healthy, well lighted and ventilated workshops and too much cannot be said in the praise of safety engineers who, fought altruistically in their efforts to bring about the wonderfully improved conditions in the coal mines of this day. While the possibility of a mine fire starting, in these days of scientific mining, is remote every one admits there still exists a possibility and to deal with a fire, should one start, most coal miners are equipped with fire extinguishers. Extinguishers of all designs conceivable are on the market, the different extinguishers are charged with different chemical substances, Some are charged with patented chemicals and others with baking soda and sulphuric acid and so on, however, many of them are equipped with about eighteen inches of rubber hose and bear the conventional "FOR FIRE-TURN UPSIDE DOWN" but nothing is said to indicate how close it may be necessary to take the extinguisher to the fire before doing the "TURN UPSIDE DOWN" act, neither is anything said as to what effect the contents may have upon the' hands, face or body of operator should he come in contact with the liquid, nor is any warning given as to the dangers in the fumes which may come from the contents of the extinguisher in contact with the fire.

Jan 1, 1922

By Graham Bright

Up until a few years ago most of the electrical equipment used in the mines of this country was developed for industrial purposes and was adapted for use in mines by slight modifications. It became apparent, however, that mining conditions differed widely from most industrial applications and it became necessary to design and develop apparatus, particularly suited for use under mining conditions. Most of the electrical apparatus used in mines today, however, does not owe its success entirely to mining development, but in many cases developments in other branches have been taken and improved upon and modified to meet mining conditions. Power Plant: In the earlier days the power plant for the production of electric power usually consisted of fairly small belt driven direct current generators operated from reciprocating non-condensing steam engines. Today where possible the mines purchase power from central stations and where not possible it is ususally produced from turbine driven plants using non-condensing turbines for the smaller plants and condensing turbines for the larger plants. The bad water conditions at many of the coal mines in this country is, responsible in a large measure for the high cost of upkeep and repairs in isolated power plants. This feature with the type of labor available makes it difficult to operate an isolated plant condensing except in the larger mines where water conditions are good and the apparatus can be taken care of. The geared turbine is a particularly simple and rugged piece of apparatus and requires very little attention over long periods of time. Hoists: The first electric hoists to be installed used various types of motors designed for railway or industrial purposes, and the control furnished was far from satisfactory. Today most of the mine hoist motors are of the alternating current type, especially designed for hoisting service. The control for motors of 200 H. P. or over is usually of the magnetic of liquid rheostat type, and as built today will operate over fairly long periods with a very moderate cost of up-keep. Hoists of 1000 H. P. or larger are usually of the direct current type using field control and receiving power from a flywheel or synchronous M. G. set. Hoists of this type have made remarkable records in regard to continuity of operation and low cost of up-keep. Where high speed operation is desired in either coal or metal mines, the D. C. equipment using field control and a separate M. G. set to supply power to the hoist motor is not only the safest and most economical but in many cases is the only type of equipment capable of satisfactorily obtaining the output required. A number of improvements have been brought out with the field control scheme in connection with the acceleration, retardation, overfeed and overwind of the hoist. With these new developments the hoist operator can no longer abuse the hoist by improper manipulation of the control handle. Until a few years ago the matter of safety devices was not given much consideration when installing hoisting equipment. At the present time the safety devices are considered one of the most important items in connection

Jan 1, 1922

In this very interesting paper, Mr. Harrington mentions a considerable variety of materials suitable for use in the rock dusting of coal mines; this suggests that you may possibly be interested in same purely theoretical figures tending to show the superiority of gypsum for this purpose. Some of the gentlemen present have found difficulty in applying a thick, adherent coating of dry gypsum to the ribs and roofs of their workings, for which reason pulverized gypsum will perhaps be chiefly useful for the loading of barrier troughs. In view of the function that rock dust is expected to perform in case of a coal-dust explosion, it seems obvious that the most efficacious dust will be the one that can absorb the most heat and absorb it most rapidly. The customary rock dusting materials differ considerably in this respect, depending principally upon the facility with which they can be decomposed at the temperatures encountered in a coal-dust explosion. Such stable materials as silica, anhydrite and flue-dust vary but slightly in their heat-absorbing capacities, the specific heats of minerals in general ranging between 0.19 and 0.22; on the other hand, gypsum and limestone, as well as certain argillaceous materials such as shale, adobe, etc., are capable of absorbing additional heat through their chemical dissociation, although, as will appear later, it is questionable whether the amount of heat thus absorbed, in the case of limestone, shale, and adobe, is large enough to have any practical value. As to the temperature developed by a coal-dust explosion, the Bureau of Mines reports one test in which gold foil was melted, and others in which silver foil was melted, but not gold; hence 1832° F. (1000° C.) seems a reasonable figure to assume for purposes of calculation. Normal temperature is taken as 68° F. (20°C.). The other fundamental data required for the computations as cited by various authorities, are as follows: [Specific heats Gypsum : 0.259 Calcium sulphate, anhydrous. . .190 Limestone 0.216 Lime 0.239 Clay, shale, silica, etc. usually not exceeding 0.220 Carbon dioxide .:0.217 Steam (at atmospheric pressure)0.500 Heats of formation CaSO4+2H2O-4.606 Kg-cal. per gram molecule, or 48.2 B:t:u.' per pound of gypsum.- CaO +C0,42.5 Kg.-cal. per gram molecule, or 765 B.t.u. per pound of limestone. Latent heat of vaporization of water. from and at 100°C.. 535.9 Kg.-cal. per kilogram (964.6 B.t.u. per pound).] Computations will be based on the Fahrenheit scale and British thermal units, as probably more familiar in the coal industry. First as to the inert materials: their heat-absorbing capacity per pound is simply the product of their specific heat, say 0.22, multiplied by the assumed rise in temperature, 1764° F., or 388 B.t.u. per pound. Gypsum, CaS0, 2H.0, though apparently perfectly dry, contains 21% of combined water. When gradually heated it will have liberated three-quarters of its water freely by the time it reaches 250° F.; the remaining one-quarter is retained to a somewhat higher temperature, but the last of it will have been expelled at 482° F. For calculating the total heat absorbed in raising gypsum (or its products) to the temperature of a coal-dust explosion, no serious error will be intro-

Jan 1, 1925

By Parley Potter

GENTLEMEN OF THE COAL MINTING INSTITUTE: I was requested to write an article on mining a short time ago; however, the time has been so short that I have not had time to prepare an article as I would like to have presented it to this body. In writing this article it has not been my intention in making comparison of various mines, to favor one or discredit the other. I hope it will be considered in that light. The coal mining industry as I have seen it in the past, at present and in the future. In years gone by large tracts of coal land could be obtained at a very small cost, and as yet coal land may be purchased at a reasonable price in this country, but I believe the time is near at hand when the methods of mining will have to be changed greatly in this country. Many changes have taken place-in the last few years, some of them have been forced by law, others by the coal operators themselves, after being convinced that the changes made were for their own benefit. During my 20 years in the mines I have seen thousands and thousands of tons of coal lost that could have been saved if proper methods of mining had been used. The Room and Pillar system of mining coal is none. too good at its best ; a certain per cent of the coal is always lost, yet it is about the only system that can be used under certain conditions, but where the Longwall system can be used I believe it is the best system yet introduced. If the Longwall system is used' there is no coal lost. You get it all as you advance with the workings. Some coal operators object to the Longwall system for several reasons, and most of the reasons they advance are not founded on facts. For instance some of them claim it is too expensive. I will admit that the cost per ton is a little higher in Longwall than it is in Room and Pillar as a rule for the amount of coal' mined, but after the Room and Pillar mine is finished as a rule there are thousands of tons of good coal lost, for the simple reason that it cannot be mined at a profit. In many cases if the same mine had been operated on the Longwall system every ton of saleable coal could have been mined at a fair profit, and in the long run would have netted the owner much more money than it did under the Room and Pillar system. The Longwall system has been in operation many years in Europe and especially Great Britain, and is the most approved of systems in many countries at the present time. Millions of tons of coal have been saved by its use in those countries. It is claimed that the Armour Packing Company loses nothing but the squeal of the hog when it is killed, and doesn't allow it to squeal much. Why lose coal if the Longwall system of mining will save it? The Longwall mine is far more easy to ventilate than the Room and Pillar mine; the air has a much less distance to travel for the same amount of working face in Longwall than it has in the Room and Pillar.

Jan 1, 1921

By J. H. Emrick

When I was asked to read a paper to you, I wondered what idea I could bring before you which would be interesting and which would be helpful in your work in operating coal mines. The Institute has been studying ways and means of increasing the safety and efficiency of mine operations. Almost every subject along this line has been discussed from time to time. In thinking the matter over it occurred to me that there was one thing used by practically all coal mining companies in considerably large quantities and which in many cases does not receive the attention it should. It is the cutter bit placed in the cutter chains on coal mining machines. Coal mining machines have been repeatedly improved during the last twenty-five years until their efficiency and convenience have reached a high level. The generating units making electrical power to operate them also have been developed to a similar degree. This machinery has been in- stalled at a great expense to coal mining companies and the installation made for the sole purpose of pulling coal cutter bits through coal. Why not then give these cutter bits some attention so as to see that they do their work as efficiently as their driving and propelling units? The consideration of this question easily divides itself into three principal parts-First, the kina of steel out of which to make the bit; Second, the proper form or shape to give it; and Third, the tempering of the bit. Let us discuss them in that order. There have been tried at different times' various grades of steel for cutter bit uses. The cheaper steels, having a very low carbon content (.10 to .30 per cent carbon) have proved un- satisfactory because such steel cannot be tempered so as to produce a satisfactory cutting tool. Because of the low carbon content, it cannot be hardened to retain its cutting edge. It dulls quickly, bends easily on striking any hard obstruction in the coal, and so requires constant resetting to its original form. The high priced alloy steels when properly shaped and tempered will give a bit that would make a clean, even cut in the coal if no impurities were encountered. Such a condition is rarely found. Alloy steel is quite brittle and on striking impurities, such as sulphur balls or a sand spar, is readily broken and so the loss of material through these broken bits and the high price paid for it more than offset all the other advantages which this steel has shown in cutting. Experience has shown that steel having approximately .70 per cent carbon and from .25 to .35 per cent manganese will give the most economical results. Some mines have obtained better results by using a steel of slightly higher carbon content and in some cases a grade of tool steel has been used. The disadvantage of using a steel having too much carbon is that it can easily be spoiled in the black- smith shop by overheating. Steels having a carbon content of about .70 per cent have a sufficiently wide range of temperatures at which they can be forged and hardened so that with ordinary care and attention they are not likely to be burned. Steel of this quality, therefore, has been found to be the most practicable because of its reasonable cost, ease in working and tempering and general durability. In the early days of mining machines, comparatively few bits were used because each machine required but a few bits because there were but

Jan 1, 1925

By James F. Howe

Modern civilization is centered around a small group of essential occupations, the three principal ones which are agriculture, mining and manufacturing. Agriculture might be called the most important of the three, as it has to do directly with the supply of food for the human race. Mining, however, is certainly next in importance, as it furnishes the supply of fuel and many of the raw materials used in manufacturing. Without mining, modern machinery and many industrial operations would be impossible. Mining takes advantage of the, natural resources in fuel and minerals that lie underneath the surface of mother earth, and while at times some of these metals are hard to find and mines come and go, mining must continue to increase. Mining is no longer a haphazard proposition but one calling for careful study and complete plans of operation for years to come. The shafts, power houses, rock dump crusher, concentrator, and other machinery must be located advantageously in order to enable owners to make a profit. Many tons of rock or mineral must be mined frequently to get one ton of concentrated metallic ore or metal itself. Economy in mining is just as essential as it is in manufacturing. The mining engineer of today is called upon to utilize every branch of engineering, and not only, is a wide: range of knowledge required, but ingenuity to meet the unusual conditions which are constantly arising from week to week. On account of the wide variety of information required by the mining engineer, some things with which he is in almost daily contact may be passed over with only a small amount of attention, provided everything is going well, in order that time and attention may be focused on what might be termed the more important features of mining operations. Because competition has become keener than ever, owing to overproduction at times of certain minerals, it becomes a matter of first, importance to understand as far as possible the factors which enter into the cost of production of any mineral which may be mined. In such times of overproduction, the high cost mine is forced to close down while the low cost mine may, if desired, be kept running constantly. In keeping a cost record, wire rope on account of its high first cost 19 coming into the lime light, and a comparison of records of one mine with another is now frequently made in order to see whether the rope service is satisfactory or not. Every rope maker, on the other hand, is interested in seeing that the rope which he produces gives the maximum possible return for the money invested. Modern mining owes much of its success to the use of wire rope for hoisting materials from beneath the surface of the ground. Deep mining would be impossible without the use of wire rope as a means of hoisting. A study, therefore, of rope problems in mining work and a discussion of the points which are beneficial to maximum life will enable the mining engineer, manager, or superintendent to keep his costs down to the minimum while at the same time he provides a suitable and sufficient safety factor for operations at all times. Mining might be defined as the extraction of coal, metallic ores, or minerals from below the surface of the ground. This definition does not cover what is known as, open pit operations or quarrying but covers the

Jan 1, 1922