Search Documents

Jan 1, 1935

By Paul A. Lang

Jan 1, 2007

By D. Harrington

At the time of mine accidents one frequently hears the expression "there will be accidents as long as there are mines", or it may be varied to state that the accident in question was unavoidable, or something similar indicating inability to prevent accidents. However, it is the opinion of the writer, after over twenty-one years experience in both coal and metal mining, seven years being spent wholly in safety work, that by far the greater number of all accidents is due to carelessness or negligence. This carelessness or negligence may be on part of the victim of the accident or of one of his companions, or on part of his employer or possibly even of the inspector or safety man, and in some cases all of these agencies are involved. It manifests itself in various guises, one of the most serious being violation of state mining laws or regulations or of mine rules, and frequently the rules of ordinary common-sense. The cause very frequently is that trait in human nature to "take a chance" and it has been the writer's observation that the worst offender is the old-time miner who has come safely through many years experience, who was mining when the "safety man was a baby", and who clings to old-time ideas and practices and has "no use" for "newfangled" present-day "notions". Unquestionably, there are accidents, wholly unavoidable and many are caused by ignorance and by the new-comer in mining, yet as previously indicated, the writer's observation is that the old-timer is by far the worst offender, bringing grief to himself, companions and employer. Of the numerous manifestations of carelessness and negligence in connection with mine accidents, which have come to the notice of the writer, only one will be treated in this paper, viz: Violation of State Mining Law, and mention will be made only of explosions and major accidents in coal' mines with which the writer came in personal contact as investigator. In most cases, in addition to mine inspection after the accident, the writer heard the evidence given at Coroner's inquest and thus was enabled to for¬mulate fairly definite impressions as to events and conditions leading up to the occurrence.

Jan 1, 1922

Cautionary Note about Forward-Looking Statements Certain statements made by us in this presentation that are not historical facts or that relate to our future plans, expectations, events or performance are forward-looking statements within the meaning of the federal securities laws. Our actual results may differ materially from those expressed in any forward-looking statements made by us. Forward-looking statements involve a number of risks and uncertainties including, but not limited to, the risks described under the heading ?Risk Factors? in the Prospectus Supplement. All forward-looking statements are qualified by these risks and uncertainties. We undertake no obligation to update the information contained in any forward-looking statements unless required by law. All statements made by us in this presentation are further qualified in all respects by the information disclosed in the Prospectus.

Jan 1, 2007

MR. C. M. GODDARD: Mr. Poli invented this little safety switch box. This junction box he has does improve the appearance mentioned in the underground junction boxes used in the foreign countries, where this thing is compulsory. There was some arrangement whereby the attachment could not be made with the switch in. The switch has got to be out of place before they can put the terminals into this box, which avoids all possibilities of short-circuits, except where protected on the inside of this box. In mines that are not gaseous, this is not so essential, but he has invented a very small junction box which probably. could be built for six or eight or ten dollars; if those things are necessary, for the handling of mining machines and their apparatus, takes current off the transmission line, and he has something that would meet that requirement, and I think when it is looked into it will meet the approval of the Bureau of Mines. He had this little box yesterday, and some of the members had looked it over and think, if they will look more favorably into it, they will find something to their advantage. PRESIDENT PRYDE: I think it is a good idea to bring in safety appliances and devices at this meeting. There were two more devices brought in here this morning; one a safety powder flask, and the other a carbide can. We have talked a great deal about permissible powder. It is going to take a little time to change over, and we would have to use the black powder cans. I will leave them in the window, if you care to investigate them.

Jan 1, 1924

By John Pfisterer

Leadership Priorities in a New Business Environment ?Komatsu Equipment Company ?Health and Safety of Our Workforce ?The Green Economy & Market Challenges ?Equipment Trends ?Our Business Approach

Jan 1, 2009

Jan 1, 1994

[Arsulich, Thomas Mechanical Engineer, S.A.E. House, Laramie, Wyoming Barrett, A. Lee joy Mfg., Co., Research Engineer, Franklin, Pa. Bartlett, Rulon Salesman, 265 S. Seventh East, Salt Lake City, Utah Beauchamp, Paul N Goodman Mfg. Co., Sales Engineer, 2509 S. Monroe, Denver, Colorado Boyle, J. J Mine Superintendent, Roundup, Montana ?Burnell, Patrick H Gebo, Wyoming]

Jan 1, 1950

The Tuesday morning session of the Rocky Mountain Coal Mining Institute was opened at 9:00 a.m. by Bob von Storch, in the absence of the President. Mr. von Storch appointed the following new members to the Resolution Committee in the absence of three of the members: Albert Keenan, E. S. O'Connor and Howard Crandell. This committee was asked to be ready to report at the Wednesday morning session. Mr. von Storch then introduced Lyman Fearn, State Mine Inspector for the State of Wyoming, who presided over the morning session. Mr. Fearn introduced the first speaker for the morning, Louis A. Engstrom, Engineer at Kemmerer Coal Company, Kemmerer, Wyoming, who delivered a talk illustrated with slides in the absence of Mike Zakotnik, Jr., who was unable to attend. (Please refer to the index for printed text of this paper.) The next paper, "New Horizons -Coal for the Steam Plants of the West," was delivered by Don Newberry, superintendent of the Castle Gate Mine of the Independent Coal and Coke Company, Castle Gate, Utah, in the absence of W. J. O'Connor. (Please refer to the index for printed text of this paper.) Bob von Storch then introduced Edward G. Fox, President of Bituminous Coal Operators' Association, Washington, D. C., who delivered a paper on "A New Era in Labor Relations."

Jan 1, 1957

Jan 1, 1977

[ADAMS, JOHN P. 0. Box 560-No. 6, Rock Springs, Wyo. ADDISON, HERBERT Big Horn Collieries Co., Colo. Bldg., Denver, Colo. ALEXANDER, JOHN 825 South Gaylord St., Denver, Colo. ALLAN, DAVID Gorham, Colo. ALLEY, GERALD 1340 Steele St., Denver, Colo. AMBLER. J. B c-o Ambler & Riter. Kearns Blde.. Salt Lake Citv. Utah ANDERSON, A. E. Midland Savings Bldg., Denver, Colo. ANDERSON, ARTHUR E...Colo. Utilities Corp., 730 Equitable Bldg., Denver, Colo. ANDERSON. FRANK Crosb Wyo. APPERSON, A. B Tramway Bldg., Denver, Colo. ARNOLD, G. O .Oak Creek, Colo.]

Jan 1, 1930

Jan 1, 1952

By D. C. McKeehan

The importance of properly bonded rail joints has received the attention of The National Research Council, whose committee will investigate several methods now used and determine the merits of each as applied to street railways. The results of this investigation should be appreciated no less by the mining industry. Literature on the subject of bonding mine tracks agrees, as a rule, "that the work is poorly done." With present day facilities there is little excuse for inadequate track conductivity, and a job well done must be maintained in order to realize results. Many years ago The Union Pacific Coal Company installed their first haulage locomotive, and at that time used the channel pin bond for joining the rails. The system utilized 500 volts and the, relatively small current for a large amount of power, undoubtedly, contributed to the success of the system. The bonding of both rails was considered imperative in those days, while now the bonding of one, rail is considered sufficient in most instances. The recent installations utilizing 250 volts and correspondingly heavier currents required a more effective method of joining the rails for use as an electrical conductor. The company has used the arc-weld bond since its introduction in 1919. The art of electric welding found great favor for various methods of doing the work. The first arc-weld bonds were placed on the outside of they ball of the rail, but the bonds were ill-adapted to rails lighter than sixty pounds per yard, and the results were that grooved locomotive wheels or derailed cars removed the bonds. Familiarity with the process of electric welding brought forth numerous schemes for joining the rails. In one, instance the rails and splice-plates were welded together and with excellent results for a short time. Track movement and vibration finally broke the welds and the method was dis¬carded. Another scheme consisted of placing a channel pin over each end of an annealed copper wire about twenty inches long. The idea was to develop some way of using short lengths of scrap wire. The pin and wire were then welded to the base of the rail. Numerous joints made in this way are still intact, but successful welds were so exceptional that the practice was abandoned. Some of these bonds were welded to the web of the rail, with the result that practically all rails broke at the weld; however, this is our only record of broken rails with arc-welded bonds. At one time a quantity of No. 2 bare iron wire wasp available and was tried as a bond and proved very satisfactory. Two or three strands twenty inches long were used and were welded to the base of the rail. The method was cheap and effective and of some merit for light rails on temporary track. The use of iron wire was criticized because it did not give a balanced circuit; that is, one having equal carrying capacity for trolley and track circuits; and I am of the opinion that this is not always necessary. The total length of bond that is in circuit is so small that it contributes very little additional resistance to the complete circuit consisting of trolley wire, rails and bonds.

Jan 1, 1923

Jan 1, 1927

Jan 1, 1927

Jan 1, 1928

The 71st Regular Meeting of the Rocky Mountain Coal Mining Institute convened at the Steamboat Village Inn, Steamboat Springs, Colorado, and was in session at 10:00 a.m. The session was called to order by William W. Grant, Assistant to Manager of Navajo Mine, Utah International, Inc., Fruitland, New Mexico. Mr. Grant was delegated to open the meeting due to the untimely death of Past President A. F. Geiger. Mr. Grant introduced President Roy Coulson, President and Director of the Kemmerer and Gunn-Quealy Coal Companies, Frontier, Wymoing. His biography follows: Jan. 7, 1922 Born to Jean and Joseph Coulson, Ernest, Pennsylvania 1940 Graduated - Indiana High School, Indiana, Pennsylvania

Jan 1, 1975

By Jerry M. Eyster

The Bush Administration is committed to reducing emissions from existing power plants Candidate George W. Bush said: The key to reducing emissions from older power plants on the federal level is to cap emissions on a level that makes sense?. And harness the power of the market place and provide economic incentives to produce better environmental results. I would want to make sure that any program we pursue does not result in excessive and unnecessary increases in electric bills.

Jan 1, 2002

By Bret K. Clayton

Jan 1, 2004

By C. B. Huntress

"We have ourselves to blame in the steel industry for our condition." These words were addressed twelve days ago by James A. Farrell, President of the United States Steel Corporation, to his "comrades" at a meeting of the American Iron and Steel Institute. They carry a note of challenge to all industry, and particularly to the coal industry, where they point the way to the pressing need for operators everywhere to get their feet under one table. It is that note which I would stress to all producers. You have yourselves to blame for your condition. True, there are inter-district competition and competition of substitute fuels, but they'll always be with us, more or less, and the only sensible, sane course is to remove the evils within our respective districts, which can be done only by constructive effort along cooperative lines. It's the same story in Alabama, the same in Illinois and elsewhere. The larger number of the men gathered here are at the front, as it were, in the business of mining coal. They are the men who are doing a remarkable operating job. And naturally, the sessions of this annual meeting treat of news from the front, of technical problems. But, as in actual warfare, those at the front are often uninformed of developments in the rear. They keep on fighting without fully sensing the significance of a disaster at headquarters. You've played your eighteen holes today and evidenced the efficiency of your technique in the, production of coal. It is not amiss to take advantage of this moment, the nineteenth hole, to ponder over what it's all about. After all, what do improvements in the art of mining mean if business policies engulf you in red ink? To the extent that mechanization is a factor in increased overhead, which in turn increases the pressure to produce regardless of market demand, it only aggravates our troubles unless there is the controlling influence of coordinated effort.

Jan 1, 1931