Search Documents

Jan 1, 1948

PRESIDENT WETZEL: Gentlemen, the fortieth regular meeting of the Rocky Mountain Coal Mining Institute will now come to order. It is my pleasure to present Mr. William Fealey, who will introduce the first speaker. WILLIAM A. FEALEY (Bethlehem Steel Company, Salt Lake City, Utah): Mr. Wetzel and Gentlemen of-the Rocky Mountain Coal Mining Institute: The Governor of the State of Utah was sup- posed to be here this morning, but he heard Bracken Lee was in town and he took a runout powder. So without any further ado, I am just going to present the Mayor of Price, Utah, who is perhaps better known to all of you than anybody else. Mayor Bracken Lee.

Jan 1, 1942

Jan 1, 1978

Jan 1, 1952

Jan 1, 1956

By John Pfisterer

Leadership Priorities in a New Business Environment ?Komatsu Equipment Company ?Health and Safety of Our Workforce ?The Green Economy & Market Challenges ?Equipment Trends ?Our Business Approach

Jan 1, 2009

By Thos. A. Stroup

From time to time the question of shearing or vertical cutting of rooms and entries especially as an adjunct to the usual horizontal cuts, has cropped up in the literature of coal mining and in the discussions of mining men. Exact and definite data based an thorough tests have usually been lacking however and the present article is written to supply as far as possible this deficiency. The tests given below were made over a period of 90 days in the summer of 1921 and the object was to investigate the general .economics, if any, that might result from the introduction of vertical cutting as a standard practice into the Clear Creek mines. The machine used was the Oldroyd Universal coal cutter and comparative tests were made against the Goodman Straight- face machine and the 35 B Jeffrey Shortwall. The tests however should be held to apply only to the various methods of cutting and not as a study in the relative merits of the various machines. The first series of tests were made in the 2nd East district of No. 3 mine, where only entries were being driven at the time, the tests therefore cover only entry work. The presumption was that the entry width would be 12 feet but the oxerrun in some cases was marked enough to make the work comparable to rooms. The first test made was to determine the time necessary to shear as well as cut the places, and the results were reduced to the time necessary to cut a ton of coal. The time for shearing in the table includes the time necessary to revolve the cutter bar to the vertical position.

Jan 1, 1924

Jan 1, 1960

CHAIRMAN LITTLEJOHN: Some of the members will want to question Mr. Farnham on some of the things he has brought tip, so we will throw the meeting open for discussion. I am quite sure Mr. Farnham will be willing and glad to answer any questions that may be put to him. MR. HOLMAN: I would like to ask Mr. Farnham a question in regard to the Duckbill: How wide a face will it operate without moving the bill? MR. FARNHAM: The Duckbill is a device that was developed in the Union Pacific Mine at Rock Springs, within the last few months, and it is shaped something like, a dustpan, with discharge throat in the rear. They made one seven feet wide and found it was too wide, and the one they are using now is between three and four feet in width. The front section of the conveyor, which attaches to the duckbill, meshes into it to form a sliding section, and the front end of the Duckbill is pushed by the upper segments. I saw one used in a room twenty-four feet wide, and they drew it back after they cleaned out one room and pushed it forward again. MR. HOLMAN: You have no arrangement other than ratchet work? MR. FARNHAM: The ratchet is for forward working and back; the sections are made 12 or 13 feet long, and the stroke of the conveyor automatically works the ratchet; they can ratchet it back; it is a hand device. MR. HOLMAN: They just swing the end of the conveyor across the face to pick up the loose coal? MR. FARNHAM: Yes; they are also planning to use it endwise along the panel face, that and the room work both are quite new in their application, and I do not think the Union Pacific is giving out any results as yet, because the system has not been in use long. MR. HOLMAN: We are planning on putting one in very shortly. MR. HALL: I understand they can swing it over 30 degrees one way or the other, and it goes the same way easily because of the continual jar of the back and forward motion on a 60-degree swing. SECRETARY SHUBART: Take on a comparatively long conveyor, you can get quite a sweep, a large part of the circle. The Duckbill could command quite a large range. For a 12-foot entry, take a four-foot wide advance through the middle of the shot coal, with a 12-foot advance, ratchet back, swing the Duckbill to the rib and repeat; but I do not think they could get as much as 60 degree. on the end of the Duckbill without curving further back. The conveyor is light and not normally set on any permanent foundation. I saw one of Mr. McCarty's first machines, a rather rudimentary one, clean tip a 12-trot entry, 21 tons of coal, in 16 minutes, three men at the face and one at the loading end. MR. FARNHAM: The average time to clean the entries is about an hour-to clean up good-it wouldn't take but a short time; that is why they get this record of several cuts a shift. CHAIRMAN LITTLEJOHN: Are there any other questions you would like to ask Mr. Farnham? MR. HOLMAN: We were discussing this entry driving in regard to the entry loader; an entry loader in advance work, just what you have to do to place the jackbars with the sheave-blocks? Do you dig along the ribs after the coal is shot or do you have any other scheme that could be worked out to a good advantage? MR. FARNHAM: This record is a report I have just received from our Chicago office, without the full details, which I have written for. I am sorry I cannot give you the details. This was an Indiana or Pennsylvania mine, near Pocahontas, not the one where they had an accident. I assume they set the jacks ahead and swung and dumped the coal partly out with a scoop and partly by hand, but the application for that for entry driving is entirely new. The reports stated that they anticipated using that as a standard method of entry driving in the future. I will be glad to see that you get a copy of it when I get the report completed. MR. MONAY: Mr. Shubart, did you say they loaded 12 tons in 16 minutes? SECRETARY SHUBART: Twenty-one tons. MR. MONAY: How long did it take to change the machinery out of there

Jan 1, 1926

Jan 1, 2005

Jan 1, 1927

Jan 1, 1929

Jan 1, 1979

[ ] Digital images of the highwall are taken from the spoils bench. Two images of the same highwall segment are are taken from two different locations. The resulting overlapping images are used to create a three-dimensional image of that section of highwall.

Jan 1, 2005

PRESIDENT LITTLEJOHN: Gentlemen, you have heard Mr. Dyer's paper. The meeting is now open for discussion. MR. NORMAN: I would like to ask the gentleman what is the distance between your crosscuts for the ventilation of rooms and entries in the state of Utah?

Jan 1, 1925

By Jeff Mattern

Topics of Discussion ?Navajo Mine General Information ?Mapping, Photogrammetryand Image Fans ?Planning: Equipment, Control Points, Targets ?Digital Photography ?Software Manipulations: Image Matching, Creating a 3d Image and Triangulation, ?Mapping? Geologic Structure, Data Analysis ?Conclusions ?Other Applications

Jan 1, 2005

By NA N/A

Jan 1, 1931

Jan 1, 1989

Jan 1, 1928

Jan 1, 1947