Search Documents

[ ]

Jan 1, 1993

By S. W. Farnham

Those who remember the years of patient effort and the slow results obtained in the first introduction of electrical coal cutters and locomotives will, I think, admit that mechanical loading of coal is unquestionably being established at a much more rapid rate than any previous application of machinery to reduce manual labor in mines. There are many operators who consider the progress of the loaders today as slow, but considering the number of years it took to thoroughly establish electrical coal cutters and locomotives, and comparing it with the short time that the mechanical loader has been on the market, and the results that have been obtained today, they will admit, I think, that the progress of the latter is much more rapid. It is about 35 years since the advent of the electrical coal cutter and electric locomotive. Their use has brought about these improved conditions, increased tonnage per mine and other features, which are of assistance to the installation of mechanical loaders. The management and the technical staff in practically all of the American mines are trained in the use of electrical machinery and understand its operation, care and maintenance. . There is frequently, a surplus of electrical power and wiring available to take care of the small requirements of the electrical loader. The mechanical loader, therefore, starts today with the ground prepared for it. Those manufacturing companies who have had years of experience in the design and construction of mining machinery, know in a large measure what to incorporate in their designs to make the parts of the new type of machine effectively strong and to operate with efficiency under the severe conditions encountered in mining service. All these advantages greatly assist the success of a new type of machine such as the mechanical loader. In spite of these advantages, however, there are bound to be some failures. All new types of loaders have to be developed. We hear of some that are a success and some that are set aside. The field of application of each type and its limitations first must be determined by actual operation. The earlier loaders had to be changed and improved in design as weaknesses developed. Not all of the new types of coal loaders have been built by mining machinery manufacturers of long experience, and the lack of experience in this line is responsible for some of the early failures. The coal mining company staffs and also those of the loader companies had to learn what the operating factors were that made mechanical loading a success. The difference in results obtained by loaders in different properties under similar physical conditions indicates that the mine management is a very large, if not the major factor, affecting the efficiency of mechanical loading. Many articles have been written on the question of loading. The subject has been quite fully discussed at recent coal meetings and in the technical press. It is not always as easy or simple a matter to form conclusions as may first appear as to one's own particular loading problem. Mechanical loading is a comparatively new art, and many companies while claiming that loaders are quite successful, do not have an accurate line on the actual saving they are affecting. Many of them have only a few of the factors taken into account in their costs. Many loaders have been generally bought without very careful consideration given to all details and except where extremely favorable conditions prevail, failure resulted. When contemplating the installation of mechanical loading, one naturally desires to select the type of loader that will, fit his mining conditions. The things

Jan 1, 1924

By R. Dawson Hall

R. DAWSON HALL (The Coal Age, New York City) : Mr. Chairman and gentlemen: I do not feel that I have anything in particular to say. I have not prepared anything for an occasion such as this. I just came from New York City, and as one man said to me today, "That is not any recommendation in particular." (Laughter.) In answer to your request for a few remarks of a timely character I would say: One of the possibilities in the Rocky Mountain Region coal mines is the use of steel arches, posts and straps. The timber of the region seems unusually subject to dry rot and does not last long, especially in those places as in southern Wyoming, where the mine atmosphere is likely to contain a large quantity of carbon dioxide. It is true that, in many mines, much care is taken to drive out this gas and to arrange that the timber will have the fresh air that will prolong its life, but despite such provision much timber is subjected to speedy rot. Steel has made rapid progress in England, Germany and France and is recognized as an economy, not an extravagance. Frequent replacement of rotting wood and removal of broken rock are a source of great waste, risk and inconvenience in operation that together spell great cost. The very dryness of the mines and the lack' of acid water are favorable to the use of steel where support of roof or sides is necessary.

Jan 1, 1932

MR. MARGOLF: Our final speaker this afternoon before we have an opportunity for some questions for the members of the panel, is a gentleman who has spent more than 40 years in the newspaper industry. He started out as an office boy while he was still in high school. He worked his way through college working for a newspaper in Lexington, Kentucky where he graduated from the University. He has a long association with the Albuquerque Tribune but what brings him here today is in his position as editor of The Rocky Mountain News which is certainly one of our largest circulations. I think it is the largest circulation newspaper in the Rocky Mountain states. Ralph Looney, in that

Jan 1, 1982

By C. H. Trik

Any article or discussion on the ventilation of Working Faces under different systems of concentrated mining is of little value to any practical man unless based upon facts gleaned from actual experience, and empirical data on this subject is, to say the least mighty scarce. Of this one thing, however, you can rest assured, the old cry of "no air at the working faces" will have become a thing of the past. No longer will we hear of some operator who has been too eager to get out the coal and who has lost sight of everything else in his mad dash for production, digging himself shut until his airways are mere pin- points and his air current a feeble thing, too weak to combat the high resistance of his restricted mine. A mine operating under one or more of the various systems of concentrated mining should always have plenty of air, for in concentrated mining the tendency is toward greatly reduced mine resistances due to increased sectional areas. It can readily be seen that the tendency is to large, wide areas across the panel and where this is true large volumes and low gauges are the rule, unless inordinate restriction is encountered in the permanent airways, and no operator, far sighted or progressive enough to adopt this system of mining when his conditions permit, would ever allow his main airways both intake and return, to be anything but model courses. As a matter of .fact, we are likely to encounter the opposite of what is usually the case in most mines to day. We are apt to find the air at the working faces sluggish due to the large areas of passage rather than to high resistance. This is combated in. various ways which will be discussed further along in this article. Those companies, of which we have knowledge in this country who, to- day are using any of the new systems of mining, seem to proceed alike in the general method of developing their acreage. Let us assume, for this discussion, the Utah Colorado Coal Corporation is going to open a mine under the new system and their conditions are such as to permit their adopting the simple block system, each face served by a separate machine, each entry having its conveyor to the cars. After the permanent haulage and airways are driven "narrow work" starts to shape the blocks. We are not interested in the length of these "conveyor headings" since we do not need to drive breakthroughs nor build stoppings for ventilation until we have reached their end when we connect them together. We have two methods of sending air to the face of these dead ends. We can laboriously and expeilsively install brattice cloth, as we go, or we can use a small auxiliary blower with canvas tubing to the face. Indeed I may say that one of the great difficulties encountered under the new systems is in the ventilation of these narrow faces. After they have been connected and an air circuit or current established, ventilation becomes plain sailing until the block is worked out. The auxiliary blower when used with flexible canvas tubing, has been found to be the ideal answer to the question of how to ventilate the headings which are anywhere from 100 to 1,000 feet long. These small blowers when properly used, can go a very long way to assist in further reducing the cost of production already assured by the new method of mining. Right angle bends are made by the tubing manufacturers to enable the fan to sit in the fresh air current, yet out of the way of operations and any recirculation is positively avoided by blowing the air around the corner to the face.

Jan 1, 1926

PRESIDENT OLIVER: May I have your attention, please, gentlemen? The Forty-Fourth Meeting of the Rocky Mountain, Coal Mining Institute is now In session. I want to say just a few words of welcome to all the delegates this morning, both old and new. There is a large group of men around here I notice who come to this meeting year after year, and it occurs to me that they must be getting something worthwhile out of these meetings, the renewal of old acquaintances, the making of new acquaintances, and the opportunity to find out what is doing in the technical end of the coal business, and what is new. So, we greet you enthusiastically and trust that you will find this meetnig on a par with all those which have gone before and. that each one of you will leave these sessions determined that you will not miss next year but will be back again. So, with that introduction, we will proceed with the business of the convention. As time is fleeing away from us, if there is no objection, I wil lentertain a motion to dispense with the reading of last year's minutes. Will somebody make that motion? MR. H: C. MARCHANT: I move we dispense with the reading of last year's minutes. (The motion was carries unanimously.)

Jan 1, 1948

By Donald P. Brown

[Mr. Brown did not make his speech available for reprint.] Productivity is the Answer - Always Was; Always Will Be When Bill Balaz invited me to speak here this morning, he asked me to examine the three most important issues Consol will face over the coming decade. There are more than three. But the more I thought about that question, the more I realized all our issues come down to only one. As I reviewed the U.S. coal industry over the past ten years, and as I thought ahead into the year2000, one thing stood out. Not markets. Not government regulations. Not record tonnages. But productivity. The recent history of American coal is a tale of productivity improvement. It is a story that needs telling. And understanding. Not just for the good of the coal industry, but for the benefit of the American economy. Americans today do not appreciate the value of productivity growth. I don't say that lightly. As I review recent debate over American industrial competitiveness, as I look at certain legislative proposals, I see disturbing trends. It's not that anyone is against productivity per se. But many people seem to fear the very processes that enhance productivity. Twentieth century America enjoyed unprecedented growth in productivity. And in personal standards- of-living. Those two go together. This century has been one of change. Demographics. Education. And technology. Many new industries-cable television, computer services, telecommunications, for example-have grown from mere dreams to billion- dollar enterprises employing tens-of-thousands. And some older industries have declined. The nature of work has changed-from manual work to know- ledge work. From agriculture, to manufacturing, to services. In the mid-1960s. AT&T employed more than one million people. These were not high-paying jobs: telephone operators, linemen and equipment assemblers. Today, the successor Bell companies and their new competitors employ no more than a few hundred thousand. Because of automation. Because of enormous gains in employee productivity.

Jan 1, 1988

The twenty-eighth regular meeting of the Rocky Mountain Coal Mining Institute, which was held jointly with the Utah Section of the American Institute of Mining and Metallurgical Engineers, was called to order at eleven o'clock A. M., Monday, March 11, 1929, President Otto Herres presiding. Introductory remarks were made by John M. Boutwell, Chairman of the Utah Section of the American Institute of Mining and Metallurgical Engineers, who outlined the intent and purpose of the joint meeting, and its co-operative program. He spoke of the in- creased recognition being given to men in the engineering profession by the public, which has recently been manifested by the election of President Hoover, an engineer of outstanding ability, and the re-election of Governor Dern to the Governorship of the State of Utah. He then introduced Governor Dern, a fellow member, to make the address of welcome. Governor Dern assured the meeting a hearty welcome. He spoke of Utah as one of the important mining states of the Union, particularly in metal mining; the magnitude of Utah as a coal mining state being limited only by its market; of the enormous coal resources of Utah, and the problems of the coal mining industry.

Jan 1, 1929

By Wm. Monay

MR. MONAY (Vice President Kinney Coal Co., Scofield, Utah): The past year and a half has witnessed a series of coal mine disasters in Utah and Wyoming, concentrated into the short space of a few months, following a long period of years in which the industry was comparatively free from devastating calamities. The natural result has been a hysterical activity on the part of bureaus, commissions and professional reformers who know little about coal mining from a practical standpoint. This activity has been met by the industry in Utah with an attitude of submission, no doubt the result of the fear of being misunderstood by the public. But it is my firm conviction that the lives and property of the coal industry will find their surest guaranty of protection in the humanity, and in the self interest of those operating and working in the mines, rather than in governmental regulation. Inelastic, inflexible blanket statutes and rules will simply stifle and hamper the initiative and progress of our industry in working out its own salvation, under the varying and changing conditions of different localities, different conditions, and in different mines. We who have spent our lives in digging in the mines and operating them, know more about this business than anyone else and I believe it is time for us to speak up and no longer sit meekly by while inexperienced bureaus and unskilled commissions make up laws, rules and regulations for us which when made are on the books to stay, even though in a short time they may prove inapplicable, in whole or in part, or be superseded by something different, and which in some cases create new dangers or lull us into a false sense of security. Shortly after the Castle Gate explosion in March, 1924, a new set of safety rules was issued by the Indus- trial Commission of the State of Utah to become effective July 1st of the same year, the most important of which prohibits the use of black powder in any mine--gaseous or non-gaseous; prohibits the use of open flame lamps in any mine-gaseous or non-gaseous; and requires that rock dusting in all main haulage ways as far as the freezing point and required that all mining machines be equipped with water to be applied while cutting. These rules have been characterized as "Utah's Monument to her Dead Miners" in a large poster spread broadcast over the country from an office in New York that styles itself the Association for Labor Legislation. In reviewing the coal mining history of the State of Utah, in the year 1900, a serious disaster occurred at Winter Quarters. The cause of the same is believed to be an explosion of powder that was stored in the mine, which was a common practice in the early days, and from that time until the Castle Gate disaster, March 8, 1924, a period of some twenty-four years, no explosion of any kind occurred in this district. During all this period open lamps were used, considerable black powder was used, rock dusting was unheard of, sprinkling with water was very generally done-all without any catastrophe. Since the adoption of the new rules, we have 'had a very violent explosion at the Carbon Fuel mine in Spring Canyon. At the time of this explosion, 3,000 feet of the main slope had been rock dusted several times between July 1st and September 21st. The second left entry, which is a main haulage way, a distance of 3,000 feet was completely rock dusted on the date of the explosion. This mine is not considered extremely gaseous, yet an explosion as violent as that of the Castle Gate mine occurred. Some thirty men who had been loading coal in various parts of the mine on this Sun- day, the day of the explosion, and other men employed in rock dusting the second left entry, had just left the mine a little while before it occurred, and no abnormal condition in the mine was noted. At the time of the explosion five machine men were in the mine.

Jan 1, 1925

By John Pfisterer

Leadership Priorities in a New Business Environment ?Komatsu Equipment Company ?Health and Safety of Our Workforce ?The Green Economy & Market Challenges ?Equipment Trends ?Our Business Approach

Jan 1, 2009

[ ]

Jan 1, 1990

[ ]

Jan 1, 1991

PRESIDENT MOSES: I think this will conclude our program for this afternoon, unless you have some- thing else. Mr. Holman, will you tell us what you are doing in the way of your local chapter, around Dawson? W. C. HOLMAN: (Chief Engineer, Phelps-Dodge Corporation, Dawson, New Mexico.) We have organized a local chapter of the Rocky Mountain Coal Mining Institute, and we invite all foremen, fire bosses, shot firers or anybody interested, either on the surface or in the mine. I think at the last meeting we had sixty to seventy men present. We hold meetings once a month; usually on a certain set Tuesday or second Friday of the month, or so on. We have a President, a Vice-President and a Secretary-Treasurer. There are no dues connected with it. We aim to take up the' papers that are presented at the various meetings of the Rocky Mountain Coal Mining Institute, and also any other subject that would be of interest, connected with our own mining operation. We usually ask two or three men to pre- sent papers, rather than one man. We find it difficult in getting one man to work up any subject, but two or three men work up very interesting papers. While we have just recently organized, we aim to have luncheons in connection with it, and possibly once a year a banquet or .some similar activity that we think would interest the men. We feel it is going to be a great help in carrying on the work of the present organization in presenting the activities around the mines. PRESIDENT MOSES: I thank you, Mr. Holman. Has any one any- thing to bring up at this time? MR. LITTLEJOHN: I would like to ask Mr. Holman if the Institute or the Chapter there is confined to Dawson alone, or open to other camps in New Mexico? MR. HOLMAN: At the present, Mr. Littlejohn, it is just confined to our own camp, although we intend to invite the members and the officials of the other camps later on, perhaps. Especially, if we gave a banquet, no doubt we would invite the others. MR. LITTLEJOHN: Is there any other Chapter in New Mexico besides yours in Dawson, Mr. Holman? MR. HOLMAN: None that I know of, right now.

Jan 1, 1926

CHAIRMAN LITTLEJOHN: We have with us this afternoon, Mr. D. W. Rockey, of the Industrial Educational Organization, who would like to occupy a few minutes of our time. There is still an hour left, and there is a lot more talking to be done, and when the time is up you can go. D. W. ROC'KEY (U. S. Vocational Training Bureau, N. M.) : Mr. Chairman and Gentlemen: I am sorry to say I am not more closely connected with the coal mining game. I am interested in it because I am interested in a great deal of educational work being done in New Mexico. Two years ago, this Institute appointed an Educational Committee to investigate the opportunity for education in coal mining, and you have the report of that committee; it was issued in May 1924. Mr. Littlejohn, Mr. Moorhead of the Phelps-Dodge Corporation, Mr. Dickinson, and Mr. Miller, I think, of the C. F. C I., and Mr. Pryde, were members of that committee. They investigated the work being done in Safety, Training, First- Aid, and other topics, and made a general survey of the educational problems that might be said to be of benefit to the coal operators and to the coal miners. I believe, if I understood Mr. Moorhead correctly, while this report was accepted the committee was not discharged; but everyone seemed to be a little in doubt as to whether this activity should continue. My plea here directly is, of course, to ask that they be made a permanent committee, and asked to report to you at the next meeting in February on what has been accomplished in carrying out the program that was advised by the various companies, and what success, from a standpoint of improved work and financial return to the company, has been had. I believe that the whole trend of your discussion here has shown the need or the opportunity for improved production through education. For instance your mechanical loader the need of men who are experienced along mechanical lines, rather than the old pick and shovel methods, and the need of better understanding of your problems, just as in your safety lamp discussion that came up in the report of your Safety Committee. We have also developed a new phase, a new may of getting at some of your problems at Dawson this year, that has not been covered previously. I want to ask Mr. Holman here to tell you what is being done as a starter. Remember, we have not worked this out. He will tell yon how we are making a preliminary start in training inexperienced miners with the idea of cutting the accident record and keeping the production of inexperienced men at a higher level. If you are interested in that, I would like to suggest that this committee be requested to investigate some of these things very carefully. The State of New Mexico was willing to put five hundred or a thousand dollars into this training program as an experiment. We are willing that the Institute should have the credit for it, but we want it carefully surveyed so at your next meeting or some subsequent meeting, they can say this has been a feasible project and worthy of consideration. Mr. Holman, will yon tell us a little about this? (Applause.) MR. HOLMAN: We had an idea that by putting a green man in the mine with an experienced miner, the green man would probably learn something, and not get into trouble, etc. We decided to take a certain portion of one of our best mines, cross entry room work, and establish an underground school. We picked one of the assistant foremen who was well trained in our particular mining methods, and any green man who was employed was put into this school. He was paid a salary and he trained each and every man. Each man or two men world be working in a room and we paid them the regular contract price; they were trained how to shovel coal, pick waste and various other things. Some would stay in there a month and be transferred to other portions of the mine or other

Jan 1, 1926

Participating Scholarship Colleges and Universities 134 AmerCable, Inc 144 Andalex Resources, Inc 118 ARCO Coal Company 148 Behre Dolbear & Company, Inc 101 Coastal States Energy Company 100 Commercial Testing & Engineering Company 88 Crane & Hoist Sales Inc 121 Cyprus Amax Minerals Company 115 Dakota Coal Company DriltechInc 135 Empire Machinery Company 94 Energy West Mining Company 122 GH Hensley Industries 126. 127 Hitachi Construction Machinery (America) Corp. 12 Ingersoll-Rand Company 141 Jennmar Corporation 142 Joy Mining Machinery - A Harnischfeger Industries Company 104 K & P Sales Engineers, Inc 114 Kennametal Inc 95 Kennecott Energy Company 133 Kerr-McGee Coal Corporation 96 LeTourneau, Inc 145 Long-Airdox Company 112 Magnum Metals, Inc 138 McLanahan Corporation 129 Mine Technik America 124 Morrison Knudsen Corporation 97 National Mining Association 98 Nielsons,Inc 136 The North American Coal Corporation 130 Northwestern Resources Company 125 O&K Orenstein & Koppel, Inc 14 Peabody Western Coal Co 131 Phillips Machine Service, Inc. 13 Pincock Allen & Holt 120 Powder River Coal Company 107 Ramsey Technology, Inc 119 Rust Tractor Company 90 Salt River Project 91 Savage Industries Inc 89 Sheraton Steamboat Resort and Conference Center 111 Stamler Corporation (An Oldenburg Group Company) 117 Tamarron Hilton Resort 137 TerraMatrix Inc 139 TIC (The Industrial Company of Wyoming, Inc.) 99 Trapper Mining Inc 106 Wagner Equipment Company 116 Western Energy Company 105 Wheeler Machinery Company 128

Jan 1, 1996

Jan 1, 1959

By T. H. Brien, O&apos

At nearly all of the copper smelters in the Southwest, at some time, calculations have been made having in view the economy of replacing fuel oil with pulverized coal as a heat-producing medium for smelting operations This matter has been, and is more so now than at any time heretofore, of very great importance. Due to the intensive development of oil-producing areas of the world and the tremendous use of fuel oil for many purposes, it seems that before many years the supply of oil will become so small as to prohibit its use for such operations as smelting. This may be caused by prohibitive prices, or even by government decree as a conservation measure. In the event that the use of fuel oil becomes out of the question, the copper companies have just two alternatives: the use of pulverized coal or electricity. The copper companies of the Southwest produced an average of 808,400,000 pounds of copper per year for the war years of 1916, 1917 and 1918. This figure is, of course, a higher one than has prevailed since the war, but at the present time nearly all of the mines and smelters are getting back to capacity. There is no doubt whatever that the consumption of copper is going to increase, perhaps for the next ten years. This means that more copper mines will be discovered and developed, and that the mines which are now producing will be called upon for a greater production. This all tends to show that the mine manager who is looking ahead must develop some substitute for fuel oil in the event of its use becoming prohibitive, and all indications seem to point in that direction. The only coal which is commercially available to the smelters in the district under discussion must come from Colorado and New Mexico. These coals are high in ash and volatile matter and comparatively low in calorific value. The proximity of the smelter to the coal mines is a large factor in determining which fuel is more economical. Most of the smelters within two or three hundred miles of the coal mines find it more profitable to burn coal, while those at greater distance find that the higher freight charges on the coal make the use of oil more economical.

Jan 1, 1923

At 10 a. m. registration was commenced and completed. At 11:30 a. m. the meeting was called to order by the President, William Littlejohn. There was no unfinished business, new business nor reports of committees. The minutes of the previous meeting, as published in the proceedings, were approved. The report of the Treasurer was referred to the Auditing Committee who were auditing the report of the previous year. At 2 p. m., President William Little- john called the meeting to order for study session. Mr. J. Samuel Pyeatt, the new president of The Denver & Rio Grande Western Railroad, ad- dressed the Institute at length, expressing his pleasure at the opportunity of meeting the coal operators, pledging his cooperation toward the solution of the mutual problems that are arising. He reviewed the change in the Western Industrial situation; explained how the revenue of The Denver & Rio Grande Western Rail- road was being received from freight rates, only twenty-four per cent above the rates of 1914, yet laborers receive 97 per cent more, supplies cost 58 per cent more, showing that no reduction in rates can be expected unless other conditions are adjusted. He gave figures to show the immense sums, aggregating ten million dollars, that have been spent on improvements in the last ten years. The railroad is improving and will continue to improve. Mr. Pyeatt feels that the serious troubles of the railroad are over and that with the cooperation of the shippers, better service and more profits are ahead. He showed the increase in rates on farm products to be only 48 per cent, as against an average in- crease in price of farm products, them- selves, of DG per cent. The position of the farmer is not as serious, nor un- fair, as has been claimed. More equitable legislation is promised, and this is needed to offset the efforts of demagogues to deceive the people as to the actual facts. Much equipment has been put into the railroad, much new and powerful equipment, and ten of the largest narrow gauge locomotives ever built have just been ordered, engines that will do the work of three of the present locomotives. This ratio of improvement will be maintained throughout the narrow guage system, and the Rio Grande will not lag behind the shippers and the operators in co- operation. The President answered Mr. Pyeatt's remarks, and then called the meeting to order for discussion. The study sessions were held; papers were read by .J. H. Emrick, "Cutter Bits"; D. A. Stout, "Experiments in Mining Methods," and Harry Petersen, "Permissible Powder and Cushion Shooting." Tuesday, February 17, 1925 The meeting was called to order Tuesday morning at 10 a.m., and papers read by: F. C. Miller, "Safety Methods With The Colorado Fuel & Iron Company"; this was supplemented by a talk by 0. C. Irwin on "Automatic Mine Fan Control," illustrated by models of the apparatus used; Samuel Tescher, "The Operation of a Gaseous Mine."

Jan 1, 1925

By James J. Bryja

The production capabilities of today?s longwall systems have resulted in significant increases in retreat rates. This has in turn resulted in a heightened demand on panel development rates to assure that subsequent panels are completed in time to avoid a longwall production outage. As a means of reducing the pressure on the panel development activity a trend has developed towards the use of wider face lengths. The aim of using a wider face is to reduce the longwall retreat rate without sacrificing productivity and thereby reduce the pressure on increasing panel development rates. However, as the face width increases so too does the number of hydraulically powered roof supports that are required to control the longwall face roof. This increase in the number of units inherently translates into increases in the level of required maintenance relative to the multitude of mechanical and hydraulic components, and an increase in the time required for tear-down and installation time during the moves between panels. An obvious method of mitigating the maintenance and move-time impacts of wider faces is to employ the use of individual roof supports having a wider center-to-center spacing. This practice would serve to minimize the number of roof supports and maximize the time availability for longwall face production. With this target in mind a joint research project with DBT was initiated in 1998 to study the feasibility of using 2 m wide shields to replace the then standard 1.75 m wide shields. After four years of comprehensive work, the technical team from DBT and RAG American Coal completed the design and development of a prototype shield that would later become part of the world?s widest longwall face employing the use of shields having a spacing of +2 meters. The final spacing of the shields actually became 2.058m in order to match the standard pitch of the rack bar shearer haulage elements on the conveyor. In July 2002, the 2 m wide shields were successfully installed in LW-46 panel at RAG Cumberland mine in the U. S. The authors in this paper summarize the design considerations of and operational experiences with the world?s widest longwall face using +2 meter wide roof supports.

Jan 1, 2008

The thirtieth regular meeting of the Rocky Mountain Coal Mining Institute was called to order at 11: 20 o'clock A. M., Wednesday, June 3, 1931, President G. A. Kaseman presiding: PRESIDENT KASEMAN spoke in part as follows: I have in mind to say a few words of welcome to the coal operators, but I am afraid that the words I might have said would be hardly appropriate, because I believe the coal operators are in the minority today. It demonstrates to my mind something that has been running through it for some little time. When the hard times came on a year ago, we thought we were going to get over it rather lightly. I recall at this time a year ago we thought that the depression was about at an end. The National Administration from Washington told us we had reached bottom and things were going to perk up, and for a few weeks or maybe a month or more there was a sort of optimism throughout the country. I had been East, and when I re- turned to Albuquerque I said to my friends and associates that things were getting better in the East and that they would soon be better out here and we will not have felt the hard times very much. But I have learned differently since. I have learned that hard times are no respecter of communities or corporations, or persons, or activities, and that we all suffer alike. On that account we find that our Institute is suffering just the same as other activities, whether national, state, local, social, or what- ever it may be. Our attendance is light or, that account. We all know when times are hard we have to stay at home and watch things closer than when they are good. And when they are good we feel that the machine will run of its own momentum and in this way we can get away to see what is going on in the world. When times are hard we have to stay at home and look after everything from day to day and hour to hour.

Jan 1, 1931