Search Documents

By J. D. Appleton, J. Ridgway, K. B. Greally

Paper presented at the 28th International Geological Congress held in Washington DC, July 1989 (International geochemical mapping sessions). The results suggest that meaningful geochemical maps can be produced from very low-density surveys, and that existing data sets could perhaps be incorporated into such a map series with the use of a system such as Uniras software. There are still many problems to be resolved, however, including the compatibility of data derived from different analytical methods, and the precise methods to be employed will necessarily require international agreement. Sampling densities should be chosen on the basis of the scale of the geochemical and geological features to be distinguished and will vary from region to region. Reanalysis of selected samples from archives to increase the range of elements determined or to unify analytical methods is only likely to be effective if the original survey was at quite a low density

Jul 1, 1991

By I. R. Stevenson, J. G. Dunn, T. N. Smith, L. C. Mackey

An experimental flash reactor has been developed to simulate the operation of an industrial flash-smelter reaction shaft. Four concentrate materials of differing mineralogical compositions were characterised and then oxidised in the reaction shaft. The products were examined by chemical analysis to determine the extent of oxidation and by electron-probe microanalysis to determine the fate of individual particles. This programme of work enabled the influence of mineralogical composition and particle size on the extent of oxidation to be assessed

Jul 1, 1991

By R. G. Garrett, A. J. S. Geddes

Paper presented at the 28th International Geological Congress held in Washington DC, July 1989 (International geochemical mapping sessions). The 1986 geochemical survey was successful in recognising all the previously known mineral occurrences of significance in Jamaica, in outlining areas not previously believed to have mineral potential and in stimulating fresh appraisals of old occurrences in terms of their potential for new commodities. This has resulted in a very significant increase in mineral exploration activity in Jamaica

Jul 1, 1991

By D. C. Cooper, P. M. Green, J. A. Plant, P. R. Simpson, A. J. Reedman

Paper presented at the 28th International Geological Congress held in Washington DC, July 1989 (International geochemical mapping sessions). The Grampian Highlands and English Lake District evolved as part of the American and European continental plates, respectively, and were separated by the Iapetus Ocean until they were tectonically juxtaposed during the late stages of the Caledonian orogeny. The similarity in the controls of the distribution of gold pathfinder elements and gold mineralisation in the two regions thus provides important information for understanding the genesis of gold deposits in comparable tectonic settings elsewhere. The data presented are inconsistent with models that invoke a juvenile source of gold or its pathfinder elements. Instead, they support a model whereby gold and its pathfinders were initially concentrated in volcano-sedimentary sequences in rapidly subsiding, tectonically controlled basins and in associated volcanic rocks. Remobilisation and mineralisation occurred subsequently, probably as a result of an increase in oxygen fugacity associated with the influx of granite magmas into the crust and the establishment of hydrothermal convective circulation systems

Jul 1, 1991

By Xuejing Xie, Tianxiang Ren

Paper presented at the 28th International Geological Congress held in Washington DC, July 1989 (International geochemical mapping sessions). Standardised stream-sediment sampling procedures have been used in mountainous and hilly terrains. Special sampling procedures were developed for application in remote environments, such as high mountains, desert, semi-desert, karst and loess-covered regions. The diversified analytical methods used in more than 20 analytical laboratories participating in the project have been unified into two multi-element, multi-method analytical systems. A unified data monitoring procedure was developed based on primary and secondary standard samples. To date the project has covered about 4 000 000 km2 and the aim is to complete the coverage within the present decade

May 1, 1991

By R. M. Honey

An attempt is made to summarise the mining law of England, Wales and Scotland. Attention is also drawn to the recent privatisation of the electric power and gas industries and the intention of the present Government to follow suit as regards coal mining. The subject of mining law is discussed under the headings: minerals or rights that have been nationalised or are vested in the Crown; ownership (of land and mineral rights); special customs; tracing of owners; right of support (arising from mining); ancillary rights and easements; obtaining prospecting and mining rights; planning permission; statutory aids to obtaining rights; notes on the history, law and practices of petroleum (onshore and offshore), gas, coal, prescribed substances, gold and silver; electricity; safety, health and welfare; and technical information and boreholes. A correction in the subsequent issue amends errors on p.A75 and A82 and regrets the publication of misinformation on the availability of grants

May 1, 1991

By P. Mousset-Jones, G. Danko

Variations of the temperature and steam/moisture content of the air with distance and time are modelled for a single airway. The input for the simulation is an air temperature that varies with time, together with the moisture/steam content that results, for example, from a fire with a given distribution of heat and of fume concentrations at the beginning of the airway. The transport of heat and moisture to the surface of the wallrock is assumed to be simultaneous. Such multiphase convection may result in evaporation from the moist wall close to the fire and recondensation downstream. The modelling of this non-linear effect is a unique feature of the new simulation. A new analytical solution is used to calculate the conduction of transient heat within the rock mantle, which, in the event of a fire, is typically a short-term process. This allows for an arbitrary variation of surface temperature with time - unlike that permitted by the age function solution, which is limited to stepped temperature changes. An iterative numerical scheme that has recently been developed to simulate mine climate is used to calculate the coupled transient heat conduction and multiphase surface heat transport in successive length increments along the airway. To demonstrate the simulation procedure a numerical example is presented in which a fire with a given distribution of heat and fume concentrations with time is located at the beginning of an airway

May 1, 1991

By R. Sankey, L. Gatty, F. Bizzozero, G. F. Shannon, F. Savaglio, L. McDonald

State mining regulations in Queensland stipulate that a mine be provided with an earth installed on surface and that all underground equipment that needs to be earthed should be connected via a copper conductor to this surface grounding point. The regulations further require that all exposed metal surfaces in underground substations be connected to an earth. In a study of earthing conditions at Mount Isa mine it was found that the physical anchoring of metal work at substations (with rockbolts and associated steel mesh) also provides an excellent electrical connection to the country rock. It was established that not only is the mine's earthing system grounded at numerous underground locations but also that such anchor points offer, in general, a path to ground with lower resistance than does the legally required grounding point on the surface. It is recommended that metalliferous mines should utilise a multiple-earth system and not a run earth connected to a single, above-ground earth point

May 1, 1991

By L. T. Isaacs, W. H. Traves

A numerical model for analysing the drainage of fill in mine stopes has been described. The model can be used to analyse the process of fill drainage in existing and proposed mine stopes. The validity and potential value of the model have been established by experience with a simpler, 2-dimensional numerical model and by testing the new model against the earlier model. The new model is more useful than the 2-dimensional model because it allows for heterogeneity of fill material within the stope - a factor that has been demonstrated to affect drainage characteristics significantly. The 3-dimensional model is also capable of predicting pore pressures and drainage rates at specific locations in the stope without the need to resort to 2-dimensional generalisations. Such information, integrated with relevant field data as they become available, will provide valuable mine planning information for the scheduling of filling operations and design of fill mixes

May 1, 1991

By A. G. Royle

Sampling formulae for in-situ material, hard rock sampling and alluvial sampling are briefly discussed

May 1, 1991

By Enrique Echegaray Muñiz

Luego de realizarse un estudio integral sobre la recuperación de minerales en la unidad productiva de Cerro de Pasco y relacionarlo con la problemática experimentada durante años sobre la metalurgia defectuosa producida, se ha planteado desarrollar una correspondencia entre la mineralogía y el tratamiento para reducir el producto defectuoso en la concentradora Paragasha. Es asi, que a partir de 1965 la concentradora inicia su tratamiento de zinc, bismuto, magnesio y zinc, obteniendo 635 TMS / d por flotación selectiva. Posteriormente, en 1895 se presentan recuperaciones de plomo y magnesio en 72% y 41%, respectivamente, al tiempo que se dan pérdidas del 20% y 39% en el contenido metálico alimentado a planta y grado del zinc concentrado (49%) por los relaves de Quiulacocha. En este sentido, el presente texto señala una alternativa de tratamiento aplicado durante el período de 1960 a 1990 a la mina Paragasha, donde se recupera la plata 61.8% y el plomo a 85%, respectivamente. Asimismo, se estabiliza la flotación por eliminación de sales solubles interferentes, consumiendo menos reactivos.

Apr 1, 1991

By Marino Carrión P

Ante la crisis ecónomica que afecta al sector minero, este ha previsto expandir su producción y reducir los costos operativos que le competen. En esta perspectiva, la Compañía minera Atacocha busca ampliar su rango de producción a partir de la elaboración de un proyecto racional del ore-body Santa Bárbara. El proyecto consiste en explotar el cuerpo mineralizado por encima del nivel 400. Sin embargo, las condiciones para la mineralización son insuficientes. En este sentido, el presente texto presenta una alternativa de explotación mecanizada donde el cuerpo mineralizado tolere los niveles altos de temperatura a través de un nuevo block que se aplique en la profundización del ore-body y puede minimizar los costos operativos que esto conlleva.

Apr 1, 1991

By Basilio Ponce Pío

La industria minera busca reducir los costos de operación y optimizar la producción a través de una modernización de las operaciones minero metalúrgicas. Bajo esta premisa, la mina Uchuccahua utiliza un nuevo método de explotación denominado "explotación por subniveles con taladros largos". En este sentido, el presente texto señala la aplicación del método a través del block mineralizado de plata llamado "Claudia", cuya explotación alcanza también a las vetas que sean mayores de dos metros. Así también revisa la recuperación de un block mineralizado en la veta Irma Viviana, la cual estuvo abandonada por derrumbes al inicio de la explotación.

Apr 1, 1991

By J. C. Tremolada

El proceso de recuperación de los metales preciosos, minerales, concentrados y relaves refractarios, implica un desafío en la hidrometalurgia en la actualidad. En este sentido, el presente texto señala la biolixiviación como tratamiento preliminar para la extracción de oro en concentrados refractarios piritosos. Para tal fin, se estudiaron los parámetros críticos que influyen en la velocidad de oxidación de un concentrado refractario de oro encapsulado en pirita, concluyendo que la adaptación del Thiobacillus Ferrooxidans Atcc 19859 en la superficie de la pirita a PH 1.8, influyó en la cinética de oxidación de la pirita. Asimismo, su aplicación se expande al tratamiento de la arsenopirita y pirrotita cuando poseen oro encapsulado.

Apr 1, 1991

By Víctor Gobitz Colchado

Dentro de la industria minera, el objetivo principal del sostenimiento a una excavación subterránea conlleva un soporte de la masa rocosa. Para tal fin, se utiliza la técnica del concreto lanzado (shotcrete), malla metálica y pernos de roca, puesto que ofrecen versatilidad y capacidad portante. En este sentido, el presente texto describe la importancia de dicha técnica a partir de su estructura, filosofía, dimensionamiento, dosificación, rebote, problemas operativos típicos y formas de medición de pago, así como los resultados de campo de una obra proyectada en una mina de la selva central.

Apr 1, 1991

By Oscar Marreros D

Luego de que Centromin realizara los estudios de los taludes del tajo Raúl Rojas a través de los métodos Janbu y Bishop, se recomendó que el talud final del lado oeste se mantuviera con el diseño planeado a 45° puesto que así lo requerían las instalaciones de la concentradora al límite del tajo. Posteriormente, este diseño se eliminó porque se comprobó la estabilidad del talud estudiado. En ese sentido, el presente texto señala los nuevos análisis de mecánica de rocas para la estabilidad en cuña, donde se eliminan los riesgos de seguridad de la concentradora y se disminuye la cantidad de desmonte.

Apr 1, 1991

By W. R. Paterson, W. Morton, D. B. Cameron

The Massbal II computer simulation program has been used to develop a general framework for the building of thermochemical models of metallurgical processes. The framework allows the rapid, simple construction of complex models of process equipment for use in flowsheet design, planning and plant operation. Application of the program to model the iron-making blast furnace and a flash smelting process is described

Apr 1, 1991

By Arnaldo T. León

El presente trabajo plantea una solución al déficit habitacional en los campos mineros para reducir los costos a la empresa y beneficiar económicamente al trabajador, familia y a la región. Esta alternativa de solución implica la participación de la empresa y el trabajador donde la compañía ofrece al trabajador un lote de terreno con los servicios básicos y el empleado a través de sus recursos propios, construye su vivienda. Asímismo, se describen las ventajas que representa para cada parte, como el impacto que ocasiona en el desarrollo regional a partir de la mejora de la infraestructura en los centros vecinos.

Apr 1, 1991

By Mario Cedrón

El presente trabajo describe la aplicación de la tecnología de perforación y voladura en túneles con equipo mecanizado, a través del empleo de las técnicas modernas y optimización de recursos, con la finalidad de minimizar los costos de operación en el túnel Intercuencas Salida Chavimochic. Para ello, se diseñó un sistema de operación para la perforación, voladura y evacuación, de forma que exista un equilibrio entre el tiempo de perforación, sobre excavación y fragmentación. Asimismo se describen las características del túnel, la selección del equipo de perforación, explosivo, diseño de la plantilla, sobreexcavación y las estadísticas de los mismos en la excavación.

Apr 1, 1991

By Gregorio Llanos Villarreal

Dado que la expansión progresiva de la mina Calera exige una productividad de material detrítico, se ha optado por una alternativa de voladuras a gran escala que controle el desmonte proveniente de los desarrollos de la mina. En esta perspectiva, el presente estudio refiere las experiencias de voladura adquiridas en la mina Calera, a partir de la aplicación de "voladuras de coyote" a gran escala. La eficiencia de sus resultados redujo la utilización de los equipos pesados en la cantera de relleno, así como los costos de los conceptos.

Apr 1, 1991