Search Documents

By Jerry C. Tien

In 2009 China mined 2.695 billion metric tones (Gt) of raw coal. It is estimated that only 3-5% or roughly 135 million metric tones (Mt) of these were mined from 300 some surface operations. Except for a dozen or so large modern operations, most of China's surface coal operations are small by western standards, with annual production ranging from a few thousand tones to 300,000 metric tones (mt). Depending on the size of operations, equipment used range from small trucks and shovels to large bucket wheel excavators and draglines in sizable pits. This article provides a brief overview of China's surface mineable coal reserves, mining methods commonly used and increasing environmental concerns; introductions of several large surface operations are also provided.

Jan 1, 2012

By G Metzner, R Rodriguez, C Savage

OK Tedi Mining Ltd. (OTML) is in the process of optimising the concentrator performance. One aspect that has been recently implemented is an upgrade of the existing expert control philosophy on the grinding circuit and this will be the topic of this paper. Ore grinding in SAG mills is a multi-input multi-output (MIMO) process subject to several disturbances, most typical being quick acting disturbances such as changes in ore characteristics like hardness and particle size and slow acting disturbances such as ball charge variations and liner wear. The OTML SAG mills treat ore from diverse ore bodies and receive fresh feed subject to large changes in particle size. These circumstances make these mills particularly challenging to control. In this paper, a comparative analysis is presented between the performance of the OTML SAG mill #2 before and after the commissioning of a hybrid control strategy. The strategy uses Expert Knowledge combined with advanced disturbance rejection to reduce the variability of the main process variables, especially pressure and power. It further optimises the overall operation by driving the SAG mill #2 against process constraints (e.g. high power, high motor temperature and high scats recycle rate) and maintaining the operation at or near this point. This strategy is implemented by a combination of the manipulated variables (i.e. fresh feed tonnage and % solids) at any given time.The paper will present trends and a statistical analysis of the comparative results of the mill operation over a period of months, showing a 30% reduction in mill power / pressure variability and a 12% improvement in average power drawn. An increase in throughput was also observed, but cannot be conclusively attributed to the change in mill control due to other changes that were made to the SAG mill #2 during the period of comparison. An additional benefit includes better acceptance from the operators with improved consistency of the SAG mill #2 operation across shifts.The paper will also discuss further improvements envisaged in the continued optimisation of the grinding control circuit.CITATION:Savage, C, Rodriguez, R and Metzner, G, 2013. Hybrid process control strategy for the Ok Tedi Mining Ltd semi-autogenous grinding mill #2 - A comparative analysis, in Proceedings MetPlant 2013 , pp 202-214 (The Australasian Institute of Mining and Metallurgy: Melbourne).

Jul 15, 2013

By Sigvard Eklund

El presente trabajo analiza los datos recogidos en la memoria del Organismo Internacional de Energía Atómica con el propósito de vislumbrar los acontecimientos que se producirán en el campo de la energía nucleoeléctrica durante el decenio que acaba de comenzar. Con la palabra "desafío" se subraya las posibilidades que entraña la energía nuclear para contribuir a la solución de los problemas energéticos del mundo.

Jul 1, 1983

By Holler W. Walter Enrique

Dado que las entidades comercializadoras de concentración y minerales exigen que los productos mineros sean limpios, la organización minera diseñó y estudió una tecnología para la eliminación del Hg, donde la fabricación y montaje de los hornos gemelos circulares permite el lavado y recuperación del material sólido. En este sentido, el presente texto describe el proceso de desmercurización de ciertos minerales a través del uso de hornos metalúrgicos que liberan el Hg, y lo descargan automáticamente del proceso en el que se encuentra.

Nov 8, 1984

By Norman King

El texto aborda la importancia de las relaciones positivas con los sindicatos en América Latina a través de dos conceptos: las relaciones de poder y las relaciones humanas. Por ello, es necesaria la aplicación de las relaciones humanas que pueden existir en las negociaciones con los sindicatos. En este sentido, se evalúan los elementos que influyen en su esctructura como la negociación-fuerza, el conflicto; el acomodamiento; la cooperación y las ideologías. De otro lado, las relaciones humanas permiten comprender las difcultades de negociación y política que implican tanto la relación de los sindicatos como de la administración y así mejorar el problema económico y de preparación de los dirigentes sindicales.

Aug 20, 1963

By William L. Rice

This Bureau of Mines Open Pile Report on cobalt is one of a series of minerals availability commodity deposit abstracts. Nonconfidential information from the Minerals Availability Program data base covering domestic and foreign cobalt properties and deposits has been abstracted for use in his report. Abstracts include applicable data on location, published reserves and resources, geology, mine and beneficiation systems, and operation information.

Jan 1, 2011

By Daniel Harrington

For several years the United States Bureau of Mines has been making a study of ventilation in metal mines, this study covering practically all the important mining districts of the country. One of the districts where a close and extended study was made was that of Butte, Mont., with its numerous interesting problems and conditions. In February, 1916, Daniel Harrington, mining engineer of the United States Bureau of Mines, was detailed to investigate the circumstances surrounding the death of 21 men in the fire at the Pennsylvania mine at Butte, and during that investigation he made underground visits to several of the large mines through the courtesy of the mine operators, and became much interested in the ventilation conditions. In May, 1916, Mr. Harrington was detailed te work in cooperation with Dr. A. J. Lanza of the United States Public Health Service in an investigation of the prevalence and causes of miners' consumption in the district. This work broadened so much that the investigation was not completed until late in 1918, the investigators making a detailed inspection of all working places in four large mines and a more or less extended examination of conditions in about 20 other mines. Ventilation was recognized immediately as being an important factor in the health of miners, and from the outset of the investigation a large part of the work consisted in obtaining and compiling data relative to the flow of air, humidity, and temperature. The officialsof the North Butte mine were engaged in making a study of ventilation problems before the coming of the investigators, so that opportunity was given to work with those officials for several months. Detailed data on air flow, temperatures, humidities, and an analyses had been obtained before the fire in the North Butte mine June 8, 1917, which resulted in the loss of 163 lives. Much information was obtained during the progress of the fire, and a detailed examination was conducted after the fire, hence an exceptional opportunity existed to study conditions relating to ventilation. This bulletin is a result of studies made from the data collected during the two and one-half years of study and observation a-boveoutlined. Its publication has been delayed through lack of funds for printing. Other publications relative to metal mine ventilation -in other parts of the United States are expected to follow.

Jan 1, 1923

By K. Ward

The Environmental Protection Agency (EPA) is beginning to provide compliance assistance visits to various industries, including mining, for Emergency Planning and Community Right-to-Know Act (EPCRA) compliance. The EPA inspectors may consist of a multi-media team deployed to review systems and procedures for EPCRA Sections 302, 304, 311, and 312. The Team’s focus may include emergency response plans, training programs, qualifications of personnel, and release notification protocols. This presentation takes a look at the EPCRA compliance challenges faced by Arizona copper mining and processing facilities.

Jan 1, 2001

By Dan Preston, Shane Yanagisawa, Robert Marshall, Don Deere

Geotechnical Baseline Reports often estimate the number of cobbles that will be encountered in terms of volume or weight. These estimates are practically impossible to verify in the field. ClaroVia Holdings in conjunction with Frontier Kemper Constructors Inc. developed Digital Geologist 2.0 to classify and count cobbles discharged from an EPB TBM at the RSC7 project in Burbank, CA. The system worked by using two stereoscopic laser sensors with a global shutter to scan and count cobbles at 12 frames per second. Results of the effort are revealed along with lessons learned and paths for improvement.

Jun 13, 2023

By Tom Ireland, Tony Rock

The proposed 1.83km long twin bore A3 Hindhead road tunnel planned for contruction in 2008 is being delivered under a Highways Agency Early Contractor Involvement (ECI) contract. The proposed construction methodology is progressive mechanical excavation of a horseshoe shaped tunnel with shotcrete installed close behind the face using robotic spraying equipment. The tunneling medium is a ‘soft rock’ sandstone for which there was little previous tunneling experience, requiring extensive geotechnical investigations and an innovative approach to lining design. A 240m long portal section though sandy material utilising a steel pipe umbrella is also required. This paper describes the development of the tunnel planning and design including the most recent developments in UK road tunnels, and the innovation included in the ‘permanent’ primary lining design.

Jan 1, 2007

By Luisa Pérez, Carlos Perea

En el caso de la minería de zinc es común emplear el método de explotación por subniveles, el cual exige rellenar los caserones vacíos, por ejemplo, con una mezcla del relave producto de la planta concentradora de mineral con un 3.5% de cemento, lo que actúa como pilar de sostenimiento de la mina (0.8 MPa). Debido a que al momento de avanzar en los tajos aledaños se producía una dilución con el mineral a explotar y, también, a que era necesario automatizar las operaciones; se decidió evaluar el relleno detrítico cementado, mediante análisis de resistencia, estudios de factibilidad, rendimiento en costos, aumento de productividad y seguridad en la operación. Como resultado, se obtuvieron valores máximos de resistencia de los pilares de 1.6 MPa, lo que evitó la dilución y mejoró el porcentaje de recuperación de mineral.

Jun 30, 2020

By A. Panteleyev, C. S. Ney, R. J. Cathro, A. Sutherland Brown

The general distribution of metal deposits in the Canadian Cordillera can be related to its tectonic evolution. The Canadian Cordillera is naturally divisible into five longitudinal tectonic belts within which rocks are broadly similar in type, age and history. From west to east they are the Insular, Coast Crystalline, Intermontane, Omineca and Eastern Marginal belts. Seven classes of metal deposits in the Canadian Cordillera are defined and their characteristics described. These classes are skarn, porphyry, massive sulphide, stratiform, magmatic, copper in basic lavas, and vein deposits. Maps showing the distribution of medal and metal-group concentrations serve to illustrate the relations in space and time between mineralization and geologic evolution.

Jan 1, 1971

The literature pertaining to the electrochemical reaction at the anode during electrolytic reduction of alumina by the Hall-Heroult process is not in universal llgreement about the gaseous product. The possibility of electrochemical formation of CO at the anode was examined using existing data. Although the thermochemistry favours co-evolution of CO and CO2 with CO as the major product, the mechanism of the reaction shows this is unlikely. Since the origin of CO can be more logically explained by non-electrochemical mechanisims, it is concluded that CO2 is the only product from the electrolytic reaction at all current densities.

Jan 1, 1967

By Miguel Aucapoma, Juan Mori, Pablo Zevallos

El sistema preventivo de desprendimiento de rocas es un prototipo de un equipamiento instrumentado digital cuya función es monitorear la condición de los techos de los socavones para evitar que se produzcan accidentes por desprendimiento de rocas producidos por debilitamiento de estructuras que sostienen los techos de los socavones debido al corrimiento de las estructuras del macizo rocoso, donde básicamente el sistema informa mediante la activación de alarmas preconfiguradas al interior de mina. El propósito de estas alarmas es prevenir y evacuar al personal de las zonas que detectan el desprendimiento de rocas. El prototipo fue diseñado como una propuesta de solución tecnológica al problema de accidentes por desprendimiento de rocas en las operaciones mineras en Perú, las cuales sumaron 297 víctimas, que representaron el 25% del total de accidentes mortales entre los años 2000 y 2018.

Sep 20, 2019

By Bettzara Mansilla, Rubén Lavado

Minera Las Bambas y los diferentes desafíos de cumplimiento para el logro de los objetivos a los que día a día nos enfrentamos, nos retan a diario a trabajar en ideas innovadoras de cumplimiento de metodologías limpias y transparentes que permitan manejar nuestros estándares de calidad y trabajar de una manera integrada el cumplimiento nuestros objetivos. La seguridad y sobre todo la prevención de los riesgos fatales se han convertido en uno de los pilares más exigentes e importantes dentro de la compañía y es por ello que el presente proyecto detalla la metodología utilizada por Minera Las Bambas para lograr una óptima gestión de sus riesgos fatales y la prevención sostenible de los mismos, la cual está enfocada en 5 etapas principales.

Sep 29, 2023

By Ch. Houston

El presente estudio refiere los factores que afectan el desarrollo minero mundial a partir de una política minera canadiense. En este sentido, la presencia de riquezas naturales, el fácil acceso, la continua predisposición a las inversiones de propietarios extranjeros, las buenas relaciones entre el comercio y el gobierno y el acceso a los mercados se constituyen como factores esenciales en el desarrollo de la producción minera del país norteamericano. Cabe agregar que la educación y la tecnología son los pilares de la conducción de este desaroollo minero, ofreciendo beneficios a los países que esten preparados en torno al conocimiento minero.

Nov 20, 1972

The U.S. Bureau of Mines has been concerned for many years with the general problems of underground coal mining and the particular problems due to the methane content of the coal. The Bureau and others have worked diligently to improve the health and safety conditions for underground coal miners. It has been recognized for many years that the methane in coal would have some value if it could he recovered and used, Also its removal before coal mining began or during the mining cycle itself would make mining safer and more economic due to a potential saving in ventilation costs. The work covered in this report was carried out to review methods of removing methane from active and inactive regions of operating coal mines and to determine how the methane could be concentrated and utilized economically.

Jan 1, 1975

By Carlos Carrasco Arbieto

El óptimo conocimiento de los parámetros geológicos es importante para la economía de cualquier proyecto minero, dado que la previsión de las fluctuaciones de los riesgos geológicos, reduce la incertidumbre en el planeamiento de Mina. Por ello, la escaza información de sondeos reportada en algunos dominios geológicos de la mina Bunge, señala una falta de confiabilidad en las leyes de óxidos de interés como del modelo. En este sentido, el objetivo del presente trabajo es la creación de una metodología para la actualización sistemática del modelo de bloques a través de la información encontrada en los análisis químicos de los polvos de los barrenos para voladura y sondeo, tanto en los aspectos químicos y geométricos. Así, el Modelo de Bloques de Corto Plazo (MCP) sería el más idóneo puesto que el mapeo geológico en detalle y la simulación geoestadistica, genera una metodología que es aplicable para la actualización, tanto da geometría, como de las leyes de diferentes unidades litológicas que forman el modelo geológico da mina.

Sep 12, 2005

By A. E. Ketler

This report describes a variety of coal mine lighting projects which were funded by the Bureau of Mines in order to obtain underground lighting experience in support of new lighting requirements for underground coal mines. Low coal and high coal, narrow and wide entries, conventional and continuous mining, ac and dc power, bituminous and anthracite, and machine mounting and area lighting were some of the variables covered in this program. Also evaluated was the OCENCO fluorescent caplamp.

Jan 1, 1979

By Edgar Espinoza

En las últimas décadas el avance tecnológico de la informática, la telemática y el uso de los satélites ha producido una revolución tecnológica en todos los campos de la ciencia, entre otros. Por ello, las empresas tuvieron que reactualizarse a través de la implementación de microcomputadoras a sus unidades de producción que van desde los sistemas CAD hasta los equipos de levantamiento de datos de campo como teodolitos en interior mina o superficie. En ese sentido, el presente trabajo describe el proceso del sistema de información tipográfica en la minería subterránea, ya que provee de información a los distintos departamentos y software mineros existentes en el mercado y automatiza los procesos repetitivos y rutinarios en el departamento de Ingeniería y Geología.

Sep 13, 2001