Search Documents

By B. W. Gandrud

This is the third report published by the Bureau of Mines concerning the washability of Black Creek coal. Both of the former reports5/6/ dealt with the Black Creek coal at the Bradford mine, Dixiana, Ala., near the northeastern extremity of the Warrior field, whereas the present report is based on float-and-sink tests of coal from what is presumably the Black Creek bed near the southern extremity of the field. Although the Yolande Coal & Coke Co., owners of the property at Yolanda No. 6 slope, consider this opening to be on the Black Creek bed, the authors do not feel that there is as yet positive proof that this correlation is correct. There has been little or no development of the Black Creek bed in the Yolande Basin in the past, and a posy-tine identification of the bed at Yolande No. o will have to await further exploration and development. The Yolande No. 6 is an exploration slope 3/4 mile north of Rockcastle, Ala. The slope is approximately 400 feet from top to bottom on a dip of 18° As fax as the authors can ascertain, coal has never been produced commercially from the Black Creek bed in the southwestern part of the Warrior field. Exploration work in the past has indicated that the Black Creek coal in. this area is extremely friable and high in sulfur. Extreme friability would naturally discourage its' use as a domestic and railroad fuel, and high sulfur content would be a disasvantage in its use for coking coal. The present study of this coal has been made with particular reference to sulfur elimination on the assumption that it would make a good coking coal provided enough of the sulfur could be eliminated by washing.

Jan 1, 1939

By André Luiz Moraes Alves

As transformações sequenciais estão presentes em vários materiais, como por exemplo, nos aços, onde na transformação da Austenita em Ferrita e Perlita, tem-se inicialmente a nucleação dos grãos ferríticos e em um instante posterior a nucleação dos grãos perlíticos. Recentemente, Rios e Villa apresentaram um método analítico exato que se aplica às transformações de fase simultâneas e/ou sequenciais. Neste trabalho o método do Cone Causal (CC) foi utilizado para o modelamento microestrutural das transformações sequenciais. Vale ressaltar que o CC é um método computacional muito versátil, sua eficiência em simulações de nucleação e crescimento já foi apresentada em trabalhos prévios. Os dados obtidos nas simulações foram comparados com as equações analíticas de Rios e Villa. A simulação permite obter, além da microestrutura propriamente dita, grandezas microestruturais quantitativas, tais como: fração volumétrica transformada, área superficial por unidade de volume, velocidade de avanço das interfaces e o caminho microestrutural.

Aug 7, 2018

Electroosmotic Dewatering and Consolidation of Mineral Waste Tailings

Sep 13, 2010

By Joseph A. DeCarlo

Coal is one of our basic sources of energy (heat, power, light) and an essential raw material for most metallurgical processing. More than two-thirds of the electricity currently produced by thermal powerplants in the United States is generated by coal, and it is expected that coal will continue to be the major fuel used for this application at least through the 1970's. Coke produced from bituminous coking coal is the principal fuel of iron blast furnaces, and unless ironmaking methods change greatly, coal will continue to maintain a dominant role in iron-ore processing and steel manufacturing for many years. Export markets are expected to increase also, adding to the overall increased demand for coal. Accompanying the increased total requirement, however, will be an ever-increasing demand for higher quality coals, specifically, coals of low sulfur content. Except for special-purpose coals such as those used for the production if coke and ceramics where impurities in the fuel contaminate the end product, the amount of sulfur in coal has been only a minor consideration in the selection of a particular coal for fuel. Major considerations, particularly for the coals used to generate electric power, have been availability and cost. An increased national concern for control of air pollution, however, particularly that resulting from the emission of sulfur oxides in stack gases to the atmosphere, has led to more rigid specifications on coal quality, and the sulfur content of coals will become increasingly more important in the future.

Jan 1, 1966

By Joseph A. DeCarlo

Coal is one of our basic sources of energy (heat, power, light) and an essential raw material for most metallurgical processing. More than two-thirds of the electricity currently produced by thermal powerplants in the United States is generated by coal, and it is expected that coal will continue to be the major fuel used for this application at least through the 1970's. Coke produced from bituminous coking coal is the principal fuel of iron blast furnaces, and unless ironmaking methods change greatly, coal will continue to maintain a dominant role in iron-ore processing and steel manufacturing for many years. Export markets are expected to increase also, adding to the overall increased demand for coal. Accompanying the increased total requirement, however, will be an ever-increasing demand for higher quality coals, specifically, coals of low sulfur content. Except for special-purpose coals such as those used for the production if coke and ceramics where impurities in the fuel contaminate the end product, the amount of sulfur in coal has been only a minor consideration in the selection of a particular coal for fuel. Major considerations, particularly for the coals used to generate electric power, have been availability and cost. An increased national concern for control of air pollution, however, particularly that resulting from the emission of sulfur oxides in stack gases to the atmosphere, has led to more rigid specifications on coal quality, and the sulfur content of coals will become increasingly more important in the future.

Jan 1, 1966

By Marcela dos Passos Galluzzi Baltazar

Catalisador monolítico comercial de níquel foi selecionado com o objetivo de se determinar o regime cinético da reação de oxidação parcial do metano (OPM). As estruturas cristalinas deste catalisador foram identificadas por DRX. A composição química superficial e o estado químico dos elementos presentes na superfície da amostra foram determinados por EDX. A técnica de microscopia (MEV) com emissão de campo foi utilizada neste trabalho com as finalidades de análise morfológica do catalisador antes de sua utilização nas reações de oxidação parcial. Análises de TG-DTA foram realizadas com o objetivo de se estudar o comportamento térmico do catalisador. A área superficial e a área metálica foram determinadas por BET e Quimissorção, respectivamente. A temperatura de redução do catalisador foi determinada através de TPR. Foi utilizada uma unidade experimental para realização de testes catalíticos. Antes das reações, os catalisadores pulverizados na faixa granulométrica < 0,150 mm foram submetidos a uma etapa de redução para ativar os sítios de níquel metálico. As análises dos produtos de saída do reator e das cargas reagentes foram realizadas por cromatografia gasosa, utilizando-se um Cromatógrafo VARIAN CP3800. Foi determinado o regime cinético na OPM utilizando as massas de catalisador 65, 80 e 95 mg.

Oct 30, 2017

By Hillary W. St. Clair

Mining activity began in colonial times with ironmaking operations scattered along the eastern seaboard. Iron furnaces and forges manufactured iron implements from bog iron ores using charcoal from the extensive forests as a fuel. Lead ores were mined in the Mississippi Valley and copper ores in the Lake Superior region. However, the real beginning of the American mining industry did not occur until the 19th century. The history of American mining is organized around three epochal events. The first was the discovery of gold in California in 1848, which marked the beginning of a period of apprenticeship in mining and metallurgical techniques. The second was the discovery of the fabulous Comstock Lode in western Nevada in 1859, which expanded mining throughout the Far West and led to large-scale underground mining and the development of smelting techniques for lead, silver, and copper ores. The third event was the building of a transcontinental rail-road system after the Civil War, which brought about the consolidation of the industry from a large number of independent mines, mills, and smelters into integrated operations run by large corporations. Thus developed the mining industry that today supplies the energy and critical materials for the great-est industrial complex the world has known.

Jan 1, 1977

By T. H. Jeffers

The U.S. Bureau of Mines has developed porous beads containing immobilized biological materials for removing metal contaminants from waste waters. The beads, designated as BID-FIX beads, are prepared by blending biomass, such as sphagnum peat moss or algae, into a polymer solution and spraying the mixture into water. Laboratory studies were conducted to determine bead sorption and elution characteristics. Batch and continuous tests demonstrated that BIO-FIX beads sorbed arsenic, cadmium, lead, and other toxic metals from acid mine drainage waters collected from several sites. Selectivity for heavy and toxic metal ions over calcium and magnesium was demonstrated. The beads exhibited excellent metal sorption and handling characteristics in stirred tanks, column contactors, and a low-maintenance passive system. The sorption process was reversible, and metal ions were eluted from the beads using dilute mineral acids. Cyclic tests indicated that the beads continued to extract metal ions after repeated loading-elution cycles.

Jan 1, 1991

By C. H. Titus

This study consists of four descriptive Sections covering respectively: a state-of-the-art literature survey on ungrounded and grounded power systems, a report on literature pertaining to human threshold limits of electric shock, an analysis of the performance requirements of isolated systems and a section on design and performance specifications for an isolated system the final section includes copies, and translations where applicable, of the most important articles on foreign mining practice as well as some technical publications which could be difficult to obtain elsewhere. Section 2 - Literature Survey In analyzing the available literature on ungrounded systems it became apparent that too strict an interpretation of Section 1.1 of the Contract would limit the survey in both period of time analyzed and in available literature which discussed several types of power systems. Therefore, the survey was expanded to cover approximately the past twenty-year period and to cover literature which addressed itself to both ungrounded and grounded power system operation. Section 2 gives a brief summary of this literature survey and lists the important papers and books which were examined.

Jan 1, 1972

By Matters C. W

THE following paper embodies the present practice and the results of past experience in the survey departments of two of the leading Broken Hill mines, the Central (Sulphide Corporation Ltd.) and the Broken Hill South S. M. Co. N. L.The authors intend to limit the scope of this paper to a consideration of office methods, as much has recently appeared in technical literature concerning field work, both surface and underground. Special reference may here be made to a valuable paper on 'Mine Surveying' by H W Gartrell, in Vol XIII of Transactions, in which the author gives considerable attention to field work. Moreover, much of the office work described in current literature is American, and sometimes not suited to local conditions, being ·often exceedingly elaborate and demanding a large staff of assistants. It is believed that the methods of recording information described in this paper are sufficiently simple and flexible to be adapted to most Australian mines. Brief acknowledgement must be made to the work done by Americans, who have raised mine surveying to the position of a separate profession, instead of being merely an unimportant branch of land surveying.

Jan 1, 1912

By J. W. Howland

A demonstration of dozer blades, designed for recontouring area-mined spoil and shown effective at Kansas and East Texas surface mine sites, was conducted at a Northeast Arizona surface coal mine to determine their effectiveness in different climate and soil conditions. The specialized tools were: 48-ft angle blade (on side-by-side tractor), 24-ft grading bar, modified 24-ft "U" blade (on side-by-side tractor), and a 13-ft deep "U" blade. Interest in the increased dirt-handling capacity of a previously built 22-ft blade, resulted in the design of a new Centerflow Blade of good versatility, able to maintain increased flow in otherwise difficult-to-move spoil. The demonstration involved 263 acres and showed a reduction of 50% in reclamation costs and 20% in fuel requirements for this mine site over conventional equipment. This savings resulted from improved technology, trained operators, and rigorous application of supervisory and monitoring techniques. Procedures and results of the demonstration are presented and analyzed here, along with guidelines for application of findings.

Jan 1, 1982

By David E. Fogelson

One model each of three different makes of portable displacement seismographs was calibrated on a shaking table capable of 5,000 pounds of force, Calibration tests were conducted in the frequency range of 5 to 200 c.p,s, and in the amplitude range of 0,002 to 0.05 inch peak-to-peak, The seismographs were tested under two mounting conditions: (1) The feet of the instrument were bolted to the shaking table, and (2) the feet were resting on emery cloth affixed to the table, The results of these tests show that, in the frequency range of 5 to 40 c.p,s, and for vibration levels less than 0.2 g, the magnification for all three instruments is constant with input level but varies slightly with frequency. For vibration levels greater than 0.4 g. and for frequencies greater than 40 c.p.s., the magnification of all three instruments shows large variations with frequency and amplitude of table motion.

Jan 1, 1962

By Marc Legault

The Duparquet mining camp situated along the Quebec segment of the Porcupine-Destor Fault was the site of gold exploitation from 1933 to 1956 and 1988 to 1991. Numerous gold showings and deposits straddle the fault. An ongoing regional metallogenic study by the Quebec Geological Survey has identified five main types of gold mineralization, each showing a distinct style, alteration, control, metal content, and timing. In order to maximise the impact of this study, a 3D regional common-earth-model was constructed along a critical segment of the Porcupine-Destor Fault with the gOcad® technology. The realisation of this model required the maximum use of the public SIGEOM numerical database, as well as the recovery of significant private data from exploration company partners. The 3D model is also a powerful new dynamic exploration tool, which can be queried using geological criteria characteristic of the different gold deposit types. This 3D model can be modified and improved continuously by adding data from new drilling, mapping or geophysical surveys. The case of the Porcupine-Destor Fault illustrates the importance of 3D common-earth-modelling in delivering refined technological geological syntheses likely to attract significant investments from the mining exploration industry, especially for deep exploration programs within mature mining camps.

May 1, 2004

As part of its research and development activities concerning coal mine operational/emergency communications sys terns, the Bureau of Mines commissioned several contractors to conduct electromagnetic (EM) noise studies and measurements that would aid the development of improved coal mine operational/emergency communications systems. The bulk of the noise studies and measurements were conducted in 1971. The Pittsburgh Mining and Safety Research Center (PMSRC) inherited the responsibility for monitoring the electromagnetic noise activities by mid-to-late 1971, and initiated a review and evaluation of the current and planned electromagnetic noise work. Arthur D. Little, Inc., (ADL) was asked by PMSRC to assist it in performing this review and evaluation by placing stronger emphasis on certain tasks of existing Contract No. H0122026. This technical memorandum report presents the findings, conclusions, and recommendations of our review and evaluation of the electromagnetic noise measurements of the five contractors we were asked to examine. Our review and evaluation effort included meetings and telephone discussions with technical staff of each contractor; serving as Technical Discussion Leader of a "Contractor's Round Table Meeting on EM Noise, Surface and Subsurface, Operating and Non-Operating Mines" called by the Bureau of Mines; examination and discussion of contractor reports and relevant open literature; sample verification calculations; and the documentation of our findings, conclusions, and recommendations by this report.

Jan 1, 1972

By Natalia Novoselova, Javiera Gerding, Alexey Novoselov

Las actividades mineras, tanto de exploración como de procesamiento de minerales polimetálicos, y los residuos resultantes depositados en relaves, emiten partículas de polvo en suspensión. Esta emisión de partículas en el aire es una de las razones de las numerosas preocupaciones sanitarias y medioambientales de las comunidades cercanas. Algunas de esas inquietudes son reales, otras no. En este contexto, la comprensión de los mecanismos y la distribución geográfica precisa de la contaminación relacionada con el polvo asociada a la minería es muy necesaria para la población local y el personal minero. Las áreas con mayor polución deben ser cartografiadas para evitar su uso y recultivadas con vegetación típica de la zona.

Sep 29, 2023

By Aline Aguiar Lopes

A piora na qualidade dos minérios de ferro tem levado as empresas a adaptarem seus processos a novas condições de qualidade das matérias-primas, surgindo assim a necessidade de desenvolver estudos que auxiliem as tomadas de decisão. Esse trabalho avaliou a influência da qualidade do sínter e da composição da carga metálica na zona coesiva do alto-forno através dos parâmetros de amolecimento e fusão. A importância de se obter informações sobre a zona coesiva se deve principalmente ao fato de nessa região ocorrer a maior parte da perda de carga no interior do alto-forno. Cinco amostras de sínter de qualidades químicas distintas, produzidas nas sinterizações da CSN (Companhia Siderúrgica Nacional), foram selecionadas e caracterizadas para esse estudo. Os ensaios de Amolecimento e Fusão foram realizados no Centro de Tecnologia de Ferrosos da Vale através de um acordo de cooperação técnica entre as empresas. Os resultados obtidos mostraram que as técnicas utilizadas são adequadas para avaliação das propriedades em altas temperaturas, fornecendo dados importantes para a interpretação do comportamento da carga metálica no interior do alto-forno, como espessura e posicionamento da zona coesiva, permeabilidade e redutibilidade da carga, indicando assim, a composição da carga metálica de melhor desempenho para o alto-forno.

Aug 17, 2017

By Guilherme Dias da Fonseca

Com base nos modelos analíticos de Johnson e Mehl, Kolmogorov e Avrami (JMAK) e Cahn, no presente trabalho estudou-se via simulação computacional a cinética das transformações de fases no estado sólido. Tais transformações ocorreram numericamente por nucleação e crescimento nas interfaces de poliedros do tipo Ortotetracaidecaedros em um domínio discreto. O intuito da matriz de Ortotetracaidecaedros é aproximar-se das características fenomenológicas de uma rede perfeita de grãos no espaço amostral. Realizaram-se simulações de nucleação com posições aleatórias em toda a matriz (bulk). Em um segundo estudo foram realizadas novas simulações de nucleação aleatoriamente, porém somente nas interfaces dos Ortotetracaidecaedros. A quantidade de núcleos iniciais para cada caso foi definida por processo de ponto de Poisson. A fração volumétrica, a área interfacial entre material transformado e não transformado, a contiguidade e o caminho microestrutural foram os resultados obtidos através das simulações. Tais resultados foram comparados com as equações analíticas. As nucleações com até mil núcleos corroboraram com JMAK e foram ratificados com o comportamento da contiguidade e do caminho microestrutural. Já as nucleações com valores acima de mil núcleos, mostram a presença de clusters, apresentando uma boa concordância com o modelo analítico de Cahn.

Oct 30, 2017

By Bernardo de Oliveira Costa

O tempo de mistura em panelas de aciaria foi avaliado em diversos trabalhos através de modelamento físico e matemático. A maioria destes trabalhos está focada em analisar os efeitos da vazão de gás e localização dos plugs porosos usados para injeção. Em artigos recentes, o uso de dois plugs de injeção foi investigado, mas ainda há uma controvérsia significativa sobre a melhor posição para injeção de gás. Nestes artigos, a vazão de gás é distribuída igualmente entre os dois plugs de injeção. Neste trabalho, foi feito modelamento físico para avaliar os tempos de mistura de panelas de aciaria equipadas com dois plugs porosos. O modelo físico foi construído na escala de 1:5 de uma panela de 170 toneladas usada em uma planta brasileira. Os tempos de mistura foram apurados usando a injeção de um traçador. Diferentes combinações de posição dos plugs porosos e distribuição da vazão de gás foram ensaiadas. Experimentos de visualização do escoamento também foram desenvolvidos utilizando tufts e injeção de corante. Estes experimentos foram úteis para análise dos resultados.

Jul 30, 2018

By Fábio Arielo Guastala

Empilhadeiras são equipamentos essenciais na movimentação de cargas em praticamente qualquer ambiente industrial e devem receber atenção especial em caso de falhas, pois podem comprometer operações e colocar em risco a saúde e a segurança de colaboradores. Este trabalho apresenta uma análise de falha dos garfos de uma empilhadeira que romperam durante uma operação rotineira de levantamento de carga. Amostras dos garfos fraturados foram submetidas à análise química, análise macrográfica, micrografia óptica, análises de dureza e microdureza e ensaios de tração e impacto. Além disso, foram analisadas as tensões as quais os garfos estavam submetidos, considerando a carga levantada, a especificação do equipamento e análises de fadiga e de tenacidade à fratura. Dessa maneira foi possível identificar o material dos garfos, suas características e também de que maneira ocorreu a fratura, resultando em recomendações que possam prever e/ou evitar ocorrências desse tipo futuramente.

Aug 16, 2017

By G. G. Goble

Dynamic pile testing is now over 20 years old as a routinely applied tool for evaluating driven pile installation. The first test on a cast-in-place pile was performed more that 15 years ago. The research that produced the method began almost 30 years ago. But, questions still arise regarding the appropriate use of this technique so some review is useful. Today a number of methods including dynamic testing all depending in some way on the application of dynamics are in routine use. First, Wave Equation analysis can be used to predict pile driveability before going to the field. The same approach can be used during driving to estimate the bearing capacity based on the blow count observed in the field. Dynamic measurements, on the other hand, can only be used after pile driving has begun. They offer predictions of pile capacity as well as measurements of hammer, driving system, and pile driving performance characteristics. The first part of this paper will be devoted to discussing how the foundation engineer can use these tools. First, a brief review of what dynamic methods actually do. In Wave Equation analysis a numerical model of the hammer, driving system, pile, and the soil is created by the engineer. The hammer is dropped on the pile and using a discrete, dynamic analysis the motion of the individual pile elements is calculated as a function of time. Of course, input information must be supplied by the program user to describe the hammer, driving system, pile, and soil. In the current state of development, the primary problem in input data is with the hammer performance (efficiency) and the soil description. Research may be able to do a better job with the soil data, but hammer performance will always vary from hammer to hammer and is dependent on the affectiveness of the inspection process. Prior to beginning pile driving the Wave Equation analysis supplies the best available estimate of what will happen when driving begins. It gives an estimate of blow count during driving, driving stresses, both tension and compression in the pile, and for diesel hammers, stroke. The selection of the driving system can be checked with the results of Wave Equation analysis and modifications can be made if required. For example, if the blow count at the required capacity was deemed excessive by the contractor a larger hammer could be tried or if driving stresses were too high changes could be made in the cushion or the hammer selection could be modified. All of these modifications are possible with only the cost of a computer run. The primary questions regarding the accuracy and reliability of Wave Equation analysis at this time is with regard to the assumptions made to represent the soil characteristics and the difficulty in predicting hammer performance.

Jan 1, 1993