Search Documents

By Robertson GE, McLaughlin JD

An extensive laboratory campaign was conducted to find a suitable water soluble collector to replace diphenylguanidine (DPG) in the matte separation process. The examination of the collectors was done by measuring the rate of flotation and the best candidate collectors were selected on the basis of the rate parameters. As a result of this search mercaptobenzothiazole (MBT) was selected for a plant trial. A plant trial of two weeks duration confirmed that MBT will produce separations at least as good as those obtained with DPG.

Jan 1, 1993

Gold recovery by catalytic copper ammonium thiosulphate solution has been studied. Such a process strategy is very attractive for leaching certain difficult-to-treat ores and presents lessened lixiviant toxicity compared to cyanide. Newmont Gold Company has evaluated the ammonium thiosulphate heap leach process for gold recovery from low-grade carbonaceous sulphidic refractory ores following biooxidation. The ammonium thiosulphate leach process has been studied in laboratory, pilot plant and demonstration scale. Satisfactory test results support the continuation of process development. However, the thiosulphate leach chemistry was found to be very complex. Maximum control of the stability of the leaching system is a key factor for success, especially for the heap leach process. Important solution chemistry is discussed in this paper.

Jan 1, 1997

The impact of computers on the mining industry has increased for the past twenty years in most parts of the world. The application of computers in the mining industry has been demonstrated in areas such as geological data analysis, ore reserve estimation, mine planning, and manpower training. There is also a general concern in this country regarding the computing background of graduating mining engineers from the Australian higher institutions of learning. This paper describes specific steps which have been taken at the Department of Civil and Mining Engineering, The University of Wollongong to provide adequate computing background to mining engineering graduates. Specific topics discussed include hardware and software available to students and how "computers" have been integrated into the mining engineering course.

Jan 1, 1986

By C Glassock, P Bodon, M Elias

Computer simulation is a well-accepted tool for modelling the behaviour of large or complex operating systems. Less common is the use of simulation as a design aid, but FluorÆs simulation group regularly applies discrete and continuous simulation models to assist with optimisation and risk management in a wide variety of mining, mineral processing and logistics applications. To demonstrate the wide applicability of simulation modelling as a design aid, this paper describes three case examples from FluorÆs recent work that cover both discrete and continuous operations.

Jan 1, 2003

There has been considerable attention in the literature to coarse sizing by wet and dry screening, but these methods have not proven to be applicable to the calculation of screen capacities for fine wet sizing, desliming and media recovery: A method is presented for the calculation of the size of screens for such duties, being based on the mean particle size of the oversize material on the screen which reflects the surface area from which the fines or media must be removed. Similarly for dewatering, it is the area from which the water must be drained. Desliming, media recovery and dewatering are each considered along with water require- ments both with the feed and as wash water.

Jan 1, 1984

By Satayev IS, Shepelev DV

Various ways for applying the X-ray fluorescent method to process lump-by lump separation of secondary aluminium raw materials (scrap, slags, waste) as well as ferrosilicon and ferrochromium are being considered and physically demonstrated. A commercial X-ray radiometric sorter has been developed for processing secondary raw materials. Marketable quantities of aluminium scrap with appropriate copper and zinc content have been produced for smelting with a minimal additional of pure aluminium. An industrial complex for scrap processing, incorporating two X-ray radiometric sorters from the Hammermils company is successfully operating at one of the works in Russia.

Jan 1, 1993

Legislation for control of ventilation in New South Wales coal mines is contained in the Coal Mines Regulation Act, 1912, as amended. The standards set down in that Act were based on the needs of the industry at the turn of the century. Changes and additions to the original standards have been made to cater for mechaniz- ation of the industry and the introduction of modern developments such as the use of diesel equipment. Technological progress has been recognized by the requirement for monitoring of machines and return airways. The passing of the Coal Mines Regulation Act 1982 has ensured that there will be a revision and modernization of the regulations affecting day to day operations of the industry.

Jan 1, 1983

By Dalmijn WL, Valk HJLvd

At the Faculty of Mining and Petroleum Engineering, the Department of Raw Materials Technology, a mathematical model has been developed to predict the porosity distribution in an uniform jig bed. If the porosity distribution in an uniform jig bed is known, it is possible to correlate this to the settling velocity of particles with a density different from the density of the bed grains and thus model the stratification in a jig. For measuring the porosity distribution in the jig bed a method has been developed based on light absorption techniques.

Jan 1, 1993

By Miskelly N

The Joint Committee of The Australasian Institute of Mining and Metallurgy (AusIMM) and the Australian Mining Industry Council (AMIC) have published a Code for the Reporting of Identified Mineral Resources and Ore Reserves. The Code is the result of an initiative begunin 1971 to achieve industry self regulation of Resources and Ore Reserves reporting which resulted first in guidelines for reporting standards but which have now been incorporated in ASX Listing Rules as a Code withsignificant sanctions ensuring compliance. This paper describes the background to the Code, its key provisions, and comments on practical aspects of1 working with the Code and compliance issues.

Jan 1, 1990

By Tooth MA

Mining, metallurgical and engineering consultants have made a considerable contribution to mining industry development in Australia. Expertise has been developed locally to a high level during the last decade which has contributed to the success of many recent mining projects. The services available'cover the whole spectrum from the evaluation of ore reserves, through feasibility study and financial evaluation to design, project management and commissioning. Using these services effectively and economically is an objective which client and consultant both must pursue but which is not always achieved. This paper discusses some aspects of the use of consultants which the experience of the authors has shown to be of prime Importance

Jan 1, 1975

By Goode A, Belby P, Wardell-Johnson M

Within a short time frame of just over two years Wirralie Gold Mine has been developed from a virgin geological discovery to an operating gold mine with a mine life of six years and a production rate of 50,000 oz per annum. Construction work on the 600,000 tpa single stage crushing, two stage milling CIP plant commenced in November 1987 and was completed some seven months later at an overall cost of $A25 million. Since commissioning in May 1988 the treatment plant has exceeded design tonnage, availability and recovery. A second expansion programme in January 1989 will increase plant capacity to one million tonnes per annum with associated bullion production of 80,000 ozs per annum.

Jan 1, 1989

By B Madeja-Struminska

The method of evaluation of the approximate temperature of arising spontaneous fire centre and time of coal self-ignition is presented in this paper. The method uses BystronÆs (1997) model of coal self-heating and measurement of carbon monoxide concentration in the mine air outside the fire centre. Knowledge of the spontaneous fire centre temperature and time of fire beginning allows for more accurate analysis of the fire hazard in the coal mine and allows for adequate time to undertake special fire prevention actions. The method is illustrated by an example from Polish mining practice.

Jan 1, 2005

By Singh RN, Yuejin LI

The problems experienced with longwall mining machinery motivate the development of an expert system for fault diagnosis. The techniques of knowledge representation, database, knowledge base and inference engine guide the selection of the expert systems and languages -"Turbo Prolog"- as exemplified in the case study of hydraulic support. The aim is to hasten future development of a fault diagnosis system and the design of a system to locate and determine the causes of failure of longwall machinery. The system would use its stored case history and other information to make fault diagnoses and suggest appropriate remedies. Consequently down-time would be reduced and production and profitability should increase.

Jan 1, 1991

The complicated mining-geological conditions in the Kuzbass have led to some difficult mining situations in the past. Now, with historical data, supplemented by geomechanical information and measurements, together with an appropriate kinematic theory, a more reliable basis exists for prediction and control of the geomechanical state during extraction, with caving and with backfilling. Continued progress and improving reliability comes from data banks and computations, and now prediction of geomechanical situations is upgraded by more routing measurements and monitoring. Not only in the Kuzbass, but throughout the USSR, 14 dedicated groups are ready to solve various specific problems of prediction an control of geomechanic situations with assured increase in the quality of mining.

Jan 1, 1991

By Zieg GA

The Sheep Creek Project lies 30 km north of White Sulphur Springs in the Little Belt Mountains of central Montana. Homestake Mining Co. discovered base metal anomalous pyrite beds downdip from gossans in 1974. Cominco American began exploration in 1976, consolidated adjacent properties, and joint ventured with BHP-Utah International in 1985. High . grade Cu and Cu/Co mineralization intersected in a 1985 drill hole led to discovery of two separate deposits. The project area now covers over 175 km2 and is being actively explored for Cu, Co and Zn in a shale hosted bedded sulphide system.Proterozoic Belt Supergroup sediments host the Sullivan Pb/Zn deposit, stratabound Ag/Cu ores of the Revett Formation at Troy and Rock Creek, and base metal rich pyrite beds at Sheep Creek.

Jan 1, 1990

Traditionally mill operators have been employed with varying educational backgrounds with little if any formal training in aspects of mineral processing. Pasminco Mining-Rosebery, in line with other organisations, saw the need for a prerequisite entry level for operators to enter the industry. After initial discussions between various West Coast Mines personnel, union and government representatives, an industry working group was formed in 1989 with the aim of developing a traineeship suitable for the mineral processing industry. Training and technical representatives from four of the West Coast Mines and TAFE were commissioned with the curriculum development. The resultant course, which is recognised under the Australian Traineeship system, involved an integrated on and off-the-job training program, including 13 weeks of formal off-the-job instruction.

Jan 1, 1991

Australia has a long and successful record in mineral processing technology extending over 100 years. This has included the development of new processes and equipment and new analytical techniques. These developments have added greatly to the efficiency of mineral processing and thereby to Australia's national wealth. Demands on mineral processing engineers in the future show no signs of diminishing, in fact they will increase considerably as more difficult areas must be treated and the requirements for quality control become more stringent. These demands must be met successfully since mineral processing must continue to be one of the most important technologies in Australia's economic future.

Jan 1, 1989

The discovery of magmatic nickel sulfide mineralisation within the Musgrave Block of Central Australia, in a region which has received virtually no exploration since the early 1970s, promoted a pegging rush throughout the region and provided a significant boost to the investor interest in resources sector companies. The discovery proved a significant success for the application of generic models for major magmatic nickel-copper sulfide deposits. The entry of junior explorers to the region is the principal mechanism by which the region will be explored, although significant social and physical challenges will impact on the ability of explorers to maintain investor confidence in the region.

Jan 1, 2002

By Seedsman R

The fundamentals concepts of roof support are similar between coal mining, metal mining and tunnelling and yet there are different design approaches, different hardware, and different levels of site investigation. This should not be the case and this paper discusses the key geotechnical issues that should underlie all roof support design - the need to reinforce defects. A design method to build a beam in laminated rock under high horizontal stresses is presented. The method allows for changing rock strengths, defect properties and varying horizontal stresses. At one level the design can be implemented with design charts and tables. Lessons learnt during the implementation of the designs at 5 different mine sites are Discussed.

Jan 1, 1998

Outbursts of coal and gas are coupled both in their nature and mechanism and take place under varied sets of physical and geological conditions. The main interacting factors are geology and seam structure, seam gas composition and pressure and strata stress. By pre-draining the seam gas in advance of workings one of the factors contributing to outbursts is removed. One method of pre- draining gas from the coal seam or from areas of geological disturbance is to drill long horizontal holes in the coal seam. The technology to drill horizontal holes up to 600 m in the coal seam is now available by hydraulic control of the rotation and thrust on the drill bit and accurate survey methods to determine the vertical and horizontal position of the drill bit.

Jan 1, 1980