Search Documents

By Tetsuo Yamazaki

Deep-sea rare-earth element-rich mud (REE Mud) distributes in pelagic clayey sediment column on ocean seafloor at 4,000-6,000 m deep. The thickness ranges 5-80 m and the burial depth 0-100 m. The REE content ranges 600-2,250 ppm in Pacific and one of the richest, maximum 6,500ppm, has been found in Marcus Is. exclusive economic zone. By applying a conventional hydraulic excavation and lifting methods, the economy of REE Mud mining around Marcus Is. is preliminary examined. Because the waste content in REE Mud is high and the disposal cost in Japan is very expensive, the mining is recognized far away from economy.

Sep 14, 2011

By Peter A. Rona

Hydrothermal mineralization along slow-spreading oceanic ridges and rift -zones that comprise more than half the global length of the seafloor spreading center system is related to anomalous physical and chemical conditions acting within the geologic settings that characterize early and advanced stages of opening of an ocean basin. Mineralization in the early stage of opening is represented by the Atlantis II Deep of the Red Sea. There, hypersaline hydrothermal solutions discharging as density stratified brines into an axial basin, have formed the largest massive sulfide deposit (70 x 106 metric tons) known at a spreading center. Mineralization at the advanced stage of opening is represented by two types of sites: (1) oceanic crust on the wall of a rift valley; and (2) oceanic crust exposed on the wall of a transform fault zone. The first type of site is the TAG Hydrothermal Field, located on a wall of the rift valley of the Mid-Atlantic Ridge at the top of the basaltic layer of oceanic crust. Evidence is presented for multi-stage, high- and low-temperature hydrothermal activity that produces Cu, Fe, and Zn enrichments within the thin sediment column and stratiform interlayered deposits of manganese oxides, iron oxides, hydroxides and silicates, on the seafloor. The second type of site occurs along walls of transform fault zones of the equatorial Mid-Atlantic Ridge and Carlsberg Ridge, which exhibit stockwork-type Cu-Fe sulfide mineralization

Jan 1, 1985

By Kira Mizell, James R. Hein

Ferromanganese (FeMn) crusts form by precipitation of iron and manganese oxides from seawater onto a rock substrate and are therefore considered hydrogenetic in origin. Diagenesis does occur however, through the process of phosphatization. During phosphatization, abundant dissolved phosphate in seawater replaces carbonate in the detrital fraction as well as directly precipitates within the FeMn matrix as carbonate fluorapatite (CFA). This process is likely accompanied by the partial dissolution or replacement of the oxide phases [1]. As a result of these diagenetic processes, trace elements adsorbed on the oxides are released and can either be depleted or enriched in the phosphatized FeMn crust layers. Pb, for example, has been shown in sequential leaching experiments to associate with the iron oxyhydroxide (FeOOH) phase in purely hydrogenetic layers, while >95% of Pb in phosphatized crust layers is found in the CFA fraction [2, 3]. However, previous sequential leaching studies analyzed bulk layers of phosphatized crusts and only a few crusts, from the Pacific Ocean. Here we present concentration data for Pb and other trace elements in the CFA fraction leached from thin stratigraphic intervals of the phosphatized portion of FeMn crusts from the Pacific and Atlantic oceans to confirm consistency of trace metal association with CFA both throughout the phosphatized section and in two ocean basins. The Pb and trace element concentration data from this study will also be compared with data from non-phosphatized crusts from the global ocean. We can then determine the effect of phosphatization on the concentration of Pb and other elements of greater economic interest in FeMn crusts, specifically whether there is overall enrichment, depletion, or possibly even phase transfer of each metal in the phosphatized layers.

Jan 1, 2018

By D. S. Limpenny

Marine benthic habitats are vulnerable to the influence of a wide range of anthropogenic activities (e.g. sand and gravel extraction, dredged material disposal and trawling). Traditionally, benthic ecologists have relied on point sampling techniques such as grabs, corers and dredges to provide information on the physical nature of the substrates and their associated benthic fauna. However, information of this nature only relates to the specific point on the seabed from which the sample was collected and the interpolation of such data to predict the wider distribution of substrata and associated fauna may be unreliable. Our approach uses a range of acoustic, photographic and physical sampling methodologies to produce continuous acoustic coverage maps which can be used to assist with the interpretation of faunal distributions. This approach has been used to assess the impacts of marine sand and gravel extraction at the seabed at two sites off the east coast of England in the southern North Sea. The first study site (designated ?Area 222?) is located 20km off the southeast coast of England and was surveyed in 2001 using sidescan sonar, single beam bathymetry, seabed photography and also a 0.1m2 Hamon grab for the collection of benthos and sediment samples. The main objectives of this investigation were to provide an indication of the spatial distribution of the sediments and macrofauna in the wider area encompassing the dredged site, to evaluate the scope for the effects of marine sand and gravel extraction to extend beyond the boundaries of the site and to provide a wider geographical context for time series investigations. At this site, an acoustic basemap was utilised in conjunction with faunal sampling and photographic groundtruthing, to determine the nature and distribution of the seabed sediments and their associated features. Disturbances at the seabed arising from historic sand and gravel extraction activities were mapped, and this information was helpful in establishing biological cause and effect relationships. The acoustic basemap was also used to target biological reference sites against which the effects of adjacent man-made disturbances could be evaluated.

Jan 1, 2004

By Kokichi Iizasa

Two major Kuroko-type deposits and minor sulfide deposits have been found in the middle Izu-Ogasawara (Bonin) Arc, Japan (Fig. 1). The Hakurei deposit, one of the major Kuroko-type deposits, was recently found in Bayonnaise knoll caldera in the nascent rift zone, which lies 20 km westward of the Sunrise deposit in Myojin knoll caldera on the Izu-Ogasawara volcanic front. The Hakurei deposit is a huge hydrothermal field measuring 500 m by 700 m in plan view. The Bayonnaise knoll caldera is mainly composed of dacite lavas and fragmental material on the caldera wall and rim, and its floor contains sediment composed of pumice, volcanic fragments, and hydrothermal clay. It is associated with a post-caldera dome and has a slightly ellipsoidal caldera rim that measures 3 km by 2.5 km, with about 200 m relief. The water depths of the caldera floor range from about 840 m to 920 m. The Kuroko-type deposit in the Bayonnaise knoll caldera occurs on the southeastern caldera floor where the caldera boundary faults intersect with a N-S-trending normal fault of the rift zone. In the deposit, many sulfide chimneys are generally less than 10 m high, and sulfide mounds are distributed around the caldera floor and on the sloping talus at the foot of the caldera wall. The deposit is buried in part by talus composed of pumice and volcanic fragments. Sulfide chimneys are still active, and inactive ones and their fragments are partly oxidized to reddish material. Chimney sulfides are mainly composed of sphalerite associated with chalcopyrite, galena, pyrite, and barite, and chemically enriched in Au up to 14 ppm and Ag up to 1400 ppm with major Zn, moderate Ba, and minor Pb, Hg, Cu, and Fe.

Jan 1, 2005

By Sven Petersen

In April 2010 three REMUS6000 series autonomous underwater vehicles (AUVs) have been used to simultaneously map large areas near the Mid-Atlantic Ridge (3°N) axis in water depths ranging from 1,000m to 4,000m. One vehicle was provided by the Leibniz-Institute for Marine Science, IFM-GEOMAR (Kiel, Germany) the other two were provided by the Waitt Institute for Discovery (La Jolla, USA) and managed by the Woods Hole Oceanographic Institute (USA). The REMUS6000 vehicles, manufactured by Hydroid Inc. (USA), are "cigar-shaped" vehicles (4m long and weighing approx. 900kg) and consist of a tapered forward section, a cylindrical midsection and a tapered tail section. An internal titanium strongback, which extends through much of the vehicle length, provides the structural integrity and acts as a mounting platform for syntactic foam, equipment housings, various sensors and release mechanisms. The AUVs can be used in various payload configurations such as multibeam bathymetry, electronic still camera, or subbottom profiler. For these missions the electronic still camera configurations was installed. An EDGETECH 2200M dual frequency (120/410 kHz) side scan sonar was used to map the seafloor, but other frequencies are readily available for more options in resolution and range. The 120 kHz side scan transmitter was used for most missions in order to map large areas (increased range) and to be able to fly at higher altitudes (between 70m and 90m) above the rough seabed encountered in this area. The maximum slant range was between 600m and 700m on both sides resulting in a swath width of up to 1.2 km. Line spacing ranged from nearly 1,000m in flat areas down to 400m in steep terrain. Side-scan mosaics were generated with a 1m resolution. Selected areas were targeted by the higher resolution 410 kHz transmitter as well as by bottom photographs flying as low as a few meters above the seabed. The vehicles navigated autonomously using a combination of inertial navigation (Kearfott T-24 or T-16 INS) and long baseline acoustic navigation by computing their range to two moored acoustic transponders. Working efficiently in this rough topography at speeds above 3 knots was only possible due to the obstacle avoidance capabilities of these AUVs.

Jan 1, 2011

By Carolita U. Kallaur

In contrast with the United Kingdom, the Netherlands, and Japan, the marine mining industry in the United States exists at a very rudimentary level. Depletion of onshore resources has undoubtedly been an important factor in the development of marine mining industries abroad. However, the institutional framework presented by government can advance or present obstacles to the development of a marine minerals industry. The role of government involves questions of the degree of risk sharing between government and industry, as well as questions of the strategic and economic importance of developing the technology and the infrastructure to recover minerals. In 1984, the Minerals Management Service (MMS) created a program office to handle these questions and to respond to a potential increase in commercial opportunities that might result from the Presidential Proclamation establishing a U.S. Exclusive Economic Zone. A critical component to the success of the program has been the formation of partnerships with coastal States to pursue projects in areas of mutual interest. Such projects involve commodities showing commercial promise and strong public need. Such a cooperative approach lessens the risk of Federal, State, or private interests working at cross purposes.

Jan 1, 1992

By Øystein Sture, Kurt Aasly, Ben Snook, Sigurd A. Sørum

INTRODUCTION Efficient exploration methodologies for base metal deposits have huge benefits for future deep sea mining endeavours, and underwater hyperspectral imaging (UHI) has been variably demonstrated to have applications in the identification and characterisation of mineralisation on the seafloor for both nodules and seafloor massive sulphides (SMS) (Dumke et al., 2018 and 2017 respectively). Due to growing resource requirements (Singer, 2017), SMS deposits are considered to be increasingly significant sources of copper and zinc, as well as silver and gold. This style of mineralisation is currently occurring at active hydrothermal vents (black and white smokers) but now-inactive sites also have the potential to be large mineral deposits. As such, the development of novel methodologies to detect both on-going and extinct mineralisations are of high importance. Geological setting During the MarMine cruise (Ludvigsen et al., 2016), non-mineralised host rock, low grade ore and high grade ore grab samples (Snook et al., 2018) was collected by ROV from the Loki’s Castle deposit (Pedersen et al., 2010), located on the Mohn’s/Knipovich junction on the ultra-slow spreading Arctic Mid-Ocean Ridge (AMOR), at a depth of approximately 2300 m. This material has been characterised as part of the MarMine project (e.g. Snook et al., 2017), and, by imaging compositionally constrained material, the measured hyperspectral responses can be used to generate a library for identification of deposits on the ocean floor. UHI technology Remote sensing with hyperspectral and multispectral technologies has seen wide use in prospecting for ores and hydrocarbons on land (Van der Meer et al., 2012). Iron oxides and sulphides have low blue reflectance and high red reflectance in the visible spectrum. The ratio between these two pairs has been used in exploration for terrestrial deposits of hydrothermal origin (Sabins, 1999). This discrimination typically also includes wavelengths exceeding the visible spectrum (1.5µm – 2.5µm). These wavelengths are typically not utilised underwater because infrared wavelengths and higher are rapidly attenuated in water. However, discrimination based on the full shape of the spectral response in the visible light (350nm – 800nm) may still be possible (Bolin and Moon, 2003). Resolving the endmembers from the spectral responses requires prior knowledge about the optical properties of the materials, i.e. their reflectance. These reflectances can be obtained in a controlled environment, where the spectra of the lamps, wavelength- dependent attenuation in water and scattering of light can be accounted for (Johnsen, 2013).

Jan 1, 2018

By Mikhail P. Torokhov

Typical coastal placers leave no doubt that placer accumulation can result in significant concentration of heavy minerals in marine shallow water environment. However, the same situation is quite predictable for guyot?s slopes at stages of submarine volcano formation and later submersion of guyots to a depth of up to 3-4 km. Where these placers could be found is also clear ? in coastal facies (as typical coastal placers), and in morphological traps down guyot slopes in zones of active submarine currents. The latter could be cracks in rocks, shallow depressions, spurs, and structures, such as coral reefs, stromatholiths, and even ferromanganese crusts. The last of these have been studied carefully by the author in the Magellan Seamounts and on the Mid-Pacific Rise: tens of minerals, including mineral forms of PGE, REE, Mo, W, Te, Cr, Co, Ni, Cu, &Zn were identified as a xenogenic (trash) minerals. The detailed study of polished epoxydized sections, showed that interstitial spaces of Fe-Mn botryoids are enriched in heavy minerals (predominantly titanomagnetite). Taking into account the irregular character of crust surfaces and their position in active water environment, we can definitely state that they are the ideal traps for placer minerals. Study of guyot basaltic matter showed the presence of similar REE, PGE minerals that are in the crusts, and the same (mostly) micron sizes of minerals. High content of PGE in some basaltic varieties (up to 1 ppm) suggests that this is a reasonable source of these elements in the crusts, rather than the water column (which is normally considered to be the case by most marine scientists). Predominance of Pt in hydrogenous (?) crusts is interpreted as due to the better stability of Pt mineral forms during weathering and transportation (these are isoferroplatinum, and silicides). Comparison of 143Nd/144Nd values in bulk crusts, heavy fraction of crusts, basalts, and water column supports the author?s idea, that a significant part of REE also comes from basaltic matter (in form of monazite, CeO2 etc.).

Jan 1, 2004

By S. Rajendran

The western continental margin comprises of the southwest coast (Cape Comorin-Mangalore), centralwest coast or Konkan coast (Mangalore-Bombay), northwest coast (Bombay-Gulf of Kutch) and the Laccadives area. Placer deposits of heavy minerals occur in discontinuous patches on the beaches along many parts of the west coast. The richest offshore placer deposits occur along the 25 km stretch of the southwest coast from Neendakara to Kayamkulam. The National Institute of Oceanography (NIO) surveys show that the sediments off the Konkan coast consist largely of silty sand, sandy silt and clay and the concentration of ilmenite is higher than the onshore. The heavy mineral concentration ranges up to 90% and has mainly ilmenite and magnetite with minor quantities of apatite, rutile, zircon, kyanite etc. The heavy mineral sands extend below the clays to water depth down to 20 m. The heavy minerals sands vary in thickness from 2-10 m. Offshore placers can be mined by using wire-line, bucket ladder and hydraulic dredges. Wire-line, bucket ladder and hydraulic dredges. Wire-line dredges may employ drag buckets or clamshell and hydraulic dredges suction or airlift principles. The dredges can be located on flat bottom or catamaran barges. Dredging of very near shore placers may be achieved by operating from land. The bucket ladder type of dredger has greater digging ability and hence can be deployed for mining placers which are partly consolidated or cemented or where the most valuable part of the deposit lies at the contact between the alluvium and the bedrock. This type operates very economically up to 45 m depth and needs minimum power requirement per unit dredged. Suction type hydraulic dredges can be operated very effectively up to 60 m water depths. This system is quite ideal for the inner shelf. The maximum practical economic working water depths for wire-line dredges are about 150 m. With the drag bucket modified into large net buckets, the method can be utilized to greater depths. They can be used in areas of high water currents and swells. The type of bucket can be changed readily with change in the nature of alluvium or substratum. The hydraulic suction dredge is the most suitable system for mining unconsolidated sediments. When the sediments are semi-unconsolidated, a cutter head can be mounted on the lower end of the suction pipe to agitate the seabed.

Jan 1, 1996

By Hjalmar Thiel

Since industry is progressing into the deep sea, marine scientists have expressed their concern about environmental disturbances which will be introduced by using the deep seafloor for mining metalliferous resources or as a repository for wastes. Environmental studies have been conducted on national levels and in bilateral or multilateral cooperation in the development of manganese nodule mining, as this is generally achieved in marine research. These investigations were partly large-scale and experimental approaches aiming at the assessment of the impacts expected to occur in commercial mining. The results elaborated till today and expected to be acquired in the foreseeable future may remain limited. Reliable impact evaluation will result from monitoring a Pilot Mining Operation (PMO). The lecture will present the broad outlines of a possible program and a preliminary calculation of approximate costs for such a combined industrial test and environmental monitoring event. Although the extent of necessary efforts for the environmental risks evaluation can only be estimated rather vaguely, it will become evident that the required human, technical, logistical, and financial resources to be mobilized will exceed industrial capacities and go beyond national funds. Therefore, such assessment of environmental risks is calling for broad international cooperation. While industrial developments for mining the deep sea will be ruled by competition or probably by restricted joint ventures, environmental care ranges outside competition and falls within the interest of all parties involved. Environmental studies, unlike technologies for the same function, do not primarily need duplication. International cooperation in PMO monitoring would equally well support all mining companies or consortia, it would minimize the efforts for all engaged in this challenging venture of deep-sea mining and it would maximize the precautionary discussion on and the care for the deep-sea environment.

Jan 1, 1994

By Kiseong Hyeong

The Intertropical Convergence Zone (ITCZ), where the southeast and northeast trade winds converge, is the effective climatological barrier that separates the southern and northern hemispheres in terms of dust budget. Asian and N. American dusts dominate in the Pacific north of the ITCZ, while Central and S. American dust prevails south of the ITCZ. In order to understand the nature of latitudinal and depth-related variations of mineral composition in terms of position relative to the ITCZ, deep-sea core sediments were collected from 9°N to 17°N at a 2° intervals along the 131.5°W meridian and analyzed for mineral composition. The amount of illite in surface sediments decreases gradually from 65% at 17°N to 31% at 9°N. In contrast, smectite increases from 11% to 56% southward. The observed mineralogical variation toward the ITCZ is attributed to the increased supply of volcaniclastic material transported via the southeast trade winds from the Central and South America source regions. Smectite-illite transition, a phenomenon that the amount of smectite increases over illite, occurs at around 10°N, the northern margin of the ITCZ. This result indicates that the change in latitudinal position of the ITCZ in the geological past could be recorded by the smectite-illite transition in deep-sea cores. The cores studied show down-core variation of mineral composition from illite-rich at the surface to a smectite-rich clay suit at depths, similar to the latitudinal variation. The smectite-illite transitions observed in these cores are likely the records of changes in latitudinal position of the ITCZ. The depth and age of the smectite-illite transition is getting shallower and younger towards the equator, implying that the ITCZ was located farther north during late Tertiary and has shifted southward to the present position of 5°N~10°N.

Jan 1, 2004

By Dorothy B. Niell, O&apos

In its first three years of operations, the in-house programs of the continental Shelf Division of the Marine Minerals Technology Center (MMTC/CSD) have focused on the development of drill systems - technology and the improvement of techniques and applications of reconnaissance methods to marine mineral deposit characterization. Many of the technological advances made to date have been in direct response to specific requests from industry for drill systems needs, and from federal and state agencies seeking technical support for various research efforts. These cooperative programs have proven to be an extremely efficient and effective way for the MMTC to achieve some of the main program goals that were established for the organization at the outset: primarily, to encourage and assist U.S. industry in marine minerals research activities and to encourage cooperative work among research institutions, government agencies, and industry. The primary achievements of the MMTC/CSD to date include the development of the Remote Placer Drill System for rapid reconnaissance drilling of precious metal placer deposits (including both pneumatic prototype and hydraulic production

Jan 1, 1991

By R. W. Nesbitt

The TAG and Broken Spur hydrothermal mounds are located on the Mid Atlantic Ridge (MAR) at 260N and 290N (respectively). Both were initially discovered by exploratory work from surface vessels and both have since been investigated by submersibles. The discovery of TAG resulted from a NOAA Trans-Atlantic Geotraverse (Rona et al. 1975) which fortuitously sampled low temperature materials on the east wall of the MAR rift valley and follow up operations (Rona et al. 1986) located the high temperature (365°C) mound some 5km to the west. In 1994, ODP deep sea drilling (Leg 158) at over 3,500 metres of water recovered core to a depth of 150 m below surface (Herzig et al. 1998) and for the first time allowed a geological interpretation of an active mound. The Broken Spur mound was accidentally discovered in 1993 when sulphide fragments were observed on a deep-sea towed camera system (Murton 1993). Later that year, exploratory submersible dives by Alvin located the hydrothermal field and the area was again explored by submersible in 1994 and 1997. Despite the amount of work carried out, our geological understanding of the MAR mounds is limited. Much effort has gone into measuring fluid chemistry whilst practical difficulties have inhibited good geological mapping of the sulphide areas. It is clear from both TAG and Broken Spur that the mounds are not necessarily located in the areas of highest heat potential. Indeed, TAG is some 2 km from the rift valley axis and has been operational for several tens of thousands of years. Hence, heat availability is not a major consideration and the most obvious control is a structural one. Mapping on Broken Spur indicates a series of isolated vent-sulphide areas, concentrated around a minor graben. Their distribution, size and nature all indicate that they are residual parts of a much larger sulphide body which was at least the size of the present TAG field. The evidence is for a cyclical pattern of mound growth -mass wasting? rejuvenation and the Broken Spur mound appears to be in the rejuvenation stage of the cycle. Mound cyclicity must be related to the supply of hot water which itself is a function of the connectivity of fracture systems. Hence, we return to the theme that the major controls in mound development are structural ones.

Jan 1, 1998

By John W. Padan

The 1982 United Nations Convention on the Law of the Sea contains major provisions that U.S. negotiators have sought for over two decades. The internationally recognized right to the mineral resources of a broad continental margin is of potentially enormous future importance to the United States. Although water depths reach 10,000 feet in some of the deeper areas of the margin, technology is rapidly making those depths economically accessible. In 1997, production in the Gulf of Mexico will reach a world record water depth of 5400 feet. Of perhaps even greater importance to the oil and gas industry is the broadly acknowledged right for tanker transport of oil to take place throughout all parts of the world's oceans.

Jan 1, 1996

By Jan Magne Markussen

The aim of the paper is to analyze the viability of commercial exploitation of polymetallic nodules, the time aspect for exploitation and the probable organization of commercial projects. METHOD My methodological point of departure is to view the various factors in context, and to differentiate between the various groups of actors. This involves taking as my starting point the interaction that exists between economics, technology, politics, law, the environment, and even psychology and ideology, and acknowledge that the various actors may well have differing motives for their engagement.

Jan 1, 1992

By Amy Gartman

The interactions between hydrothermal fluids and seawater result in minerals that range in size from nano- to macro-scale and constrain mineral emplacement, whether in hydrothermal chimneys or metalliferous sediments. Although broad similarities exist, and sulfides are the most important component of seafloor massive sulfide deposits, the specific mineralogy, size and therefore reactivity of particles emitted varies between hydrothermal sites in the global ocean, and even at different sites within the same vent field. The oxidation of sulfide minerals results in one of the major impacts of terrestrial mining of volcanogenic massive sulfides as it creates acid mine drainage. At marine hydrothermal vents, the chimneys themselves, as well as the ‘black smoke’ begin to oxidize as soon as they are in contact with ocean water; the breaking of sulfide minerals during marine mining will expose further surface area to seawater and oxidation. Although the cold temperatures and circum- neutral pH result in oxidation proceeding less rapidly than in many terrestrial systems, there is limited data on the kinetics of sulfide oxidation in seawater. Here, the oxidation of sulfide minerals in seawater and the implications for marine mining will be discussed, with an emphasis on nano-ZnS and sphalerite, including reaction kinetics, processes, and oxidation products.

Jan 1, 2018

By Peter M. Bartlett

The Republic of South Africa ranks among the world leaders in both reserves and production of numerous land-based mineral commodities. Over the last three decades, however, South Africa has also identified several commodities that may exist in commercial quantities in the marine environment. The major targets include 1) placer diamonds; 2) titanium- and zirconium-rich beach sands; 3) sedimentary and concretionary phosphorite and glauconite deposits; 4) manganese nodules; and 5) hydrocarbons. South Africa ranks second in world reserves of diamonds and has potentially enormous sea resources. Diamonds are currently recovered on the Atlantic side from ancient beach gravels in the Northwest Cape Province and from the seabed south of the Orange River to Lamberts Bay. Approximately 100,000 carats (or just 1% of South Africa's total annual production) are produced each year from offshore operations. DeBeers is investing approximately $5 million per year on sea prospecting activities and currently operates three vessels in offshore recovery operations. Diamonds recovered at sea will remain a small percentage of total production because of huge land-based reserves that are mined at a fraction of the cost of seabed operations.

Jan 1, 1986

By Robert M. Owen

The reconstruction of ocean history has been a major focus of marine research over the past decade. A significant outcome of these investigations is the recognition that certain types of marine mineral deposits are linked to regional to global scale changes in ocean composition and climate conditions. Manganese-bearing deposits are of particular interest in this regard because changes in their occurrence, distribution and/or composition are responsive to both biochemical and geological factors. Analyses of such deposits whose formation spans critical age/epoch boundaries thus provide clues concerning the interplay of different process during anomalous periods in Earth history. Recent studies demonstrating this deposit - event - process relationship include: (1) Changes in the bulk chemical composition of ferromanganese crusts during the Late Miocene-Early-Pliocene (-7-3 Ma) that coincide with a period of enhanced biological productivity in the eastern equatorial Pacific upwelling zone; (2) The formation of large statiform manganese deposits at the Cenornanian- Turonian Boundary (-92 Ma) in association with widespread oceanic anoxia; and (3) Increased deposition of hydrothermal precipitates caused by tectonic reorganizations at the Paleocene - Eocene boundary (-55 Ma) that resulted in global-scale changes in atmospheric and oceanic circulation and climate.

Jan 1, 1995

By J. R. Hein

East Diamante is a submarine volcano in the southern Mariana arc that is a complex caldera about 10 km x 5 km (elongated ENE-WSW), and breached on its northern and southwestern sectors. A large field of barite-sulfide mounds was discovered in June 2009 and revisited in July 2010 aboard the R.V. Natsushima using the Hyper-dolphin ROV. The mound field occurs on the NE flank of a cluster of resurgent domes inside the caldera. The mound field extends for more than 100 m long and is about 30 m wide, and is aligned along a NE-SW rift valley. A sample of dacite yielded a 40Ar/39Ar age of 20,000±400 years. Individual mounds are typically 1-3 m tall and 0.5-2 m wide, with lengths from about 3 to more than 5 m. The mounds are composed of barite-dominant layers interbedded with Zn-sulfide-rich barite layers. Rare inactive spires and chimneys cap some mounds. Fe and Mn oxides are currently forming small (<1 m diameter, ~0.5 m tall) subsidiary mounds on the top of some of the sulfate/sulfide mounds and drape the flanks of others. Both diffuse- and focused-flow fluids emanate from the subsidiary oxide mounds. Ages of the basal sulfate/sulfide mounds cluster around 4,000 years old based on 226Ba/Ba, whereas the oxides are less than 5 years old based on 228Th/228Ra. Most mound and chimney samples are dominated by barite and amorphous silica; sulfides occur in variable amounts that in decreasing order of abundance include sphalerite, galena, pyrite, and chalcopyrite. Anglesite, cerrusite, and a Pb phosphate occur as late-stage interstitial phases. Some mound samples have fragmental textures; layered clasts composed of chalcopyrite and pyrite may have been derived from collapsed chimneys. Despite the abundance of barite, samples contain high concentrations of Zn (to 23 Wt.%), Pb (to 13 wt.%), Ag (to 500 ppm), and Au (to 15 ppm). Copper is enriched in a few mounds samples, up to 3 wt.%, but is typically <1 wt.%. Other significant metal enrichments include Sb (to 1320 ppm), Cd (to 1180 ppm), and Hg (to 55 ppm).

Jan 1, 2011