Search Documents

By Sridhar Dutta

This paper point out the predictive performance of a relatively new learning model called the support vector machines (SVM) for spatial grade estimation of two grade attributes alumina and silica in a bauxite deposit of India. In developing the SVM model, it was trained with known input-output patterns of training data set which was derived by splitting the entire data set into training and prediction sets using Genetic algorithms (GA). The use of GA algorithms was made because it attempted to divide the data into two statistical similar subsets. The predictive performance of the SVM was also compared with the ordinary kriging technique using the various statistical indices including Mean Squared Error (MSE), Mean Absolute Error (MAE), Mean Error (ME) and the coefficient of determination (R2) on the prediction data set.

Sep 19, 2006

By Medardo Echegaray R.

El presente texto señala la utilización del complejo acético para la determinación colorimétrica del fierro en la industria. De acuerdo a los estudios realizados anteriormente, se encontró que el método es simple, rápido, económico y exacto en su proceso y aplicación de muestras ambientales. Las condiciones óptimas de trabajo requeridas son que las lecturas deben efectuarse a 465 mu, la zona de máxima exactitud está comprendida a 2 y 30 mg. de Fe, el color correspondiente al complejo sigue la ley de Beer en el rango indicado, la curva de trabajo es reproducible, el color es estable y el pH puede variar de 3. 5 - 4. 4 sin afectar el resultado. Finalmente, no existe interferencia por el manganeso, fluor o níquel, pues el cromo solo interfiere cuando se encuentra en cantidades mayores a su máxima concentración permisible (O. l mg).

Jul 20, 1961

By Bernardo Rubio

La unidad de Ucchuchacua de la compañía de Minas Buenaventura produce concentrados de plomo, plata, manganeso. Sin embargo, el transporte y la comercialización de este último, causó problemas para el medio ambiente puesto que se auto combustionaba en los depósitos del Callao y era un peligro para el embarque. Posteriormente, se inicia la lixiviación ácida de los concentrados con la finalidad de reducir el MnS de niveles en dichos concentrados. Dicha implementación como etapa de limpieza, conllevó consecuencias en el agua, suelo y aire, los que fueron mitigados con la implementación de plantas de tratamiento de relave y planta de sulfuro de sodio. En este sentido, el presente texto describe las medidas para eliminar la lixiviación a través del cambio de reactivos y así reducir el impacto ambiental. Para ello, se realizaron investigaciones con diferentes reactivos de flotación para deprimir la alabandita y obtener un concentrado de 200-300 onz./tcs y 2–4 % de Mn (alabandita).

Sep 13, 2001

By Cristina Cereceda

El presente texto describe los flujos volcánicos en el valle de Chili, Arequipa con el objetivo de establecer la estratigrafía y reconocer las características sedimentológicas de los flujos de escombros volcánicos en la cuenca media del río Chili, así como realizar una evaluación y zonificación de peligros por emplazamiento de flujos hiperconcentrados a partir de una simulación con el programa FLO2D. La zona de estudio comprende el valle del río Chili, desde el santuario de Chapi Chico hasta Uchumayo, donde los trabajos geológicos realizados a nivel de detalle evidencian 10 depósitos de lahar y 12 depósitos de flujos hiperconcentrados provenientes del Misti, Pichu-Pichu y Chachani, emplazados en el Holoceno y época histórica. Así tambiénel mapa de peligros generado, muestra que las zonas de mayor peligro corresponden al sector Yanahuara-Pampas del Cuzco. En caso de una erupción del Misti, la posibilidad de formación de estos flujos es alta, destruyendo la infraestructura cercana al cauce del río Chili y desabasteciendo de agua para la población e industria, especialmente minera.

Sep 14, 2009

By Dimas A. Cárdenas

La Fundición de cobre de Ilo se enfrenta a un llamado fenómeno del palo de hockey, donde tiene que cumplir con los planes de producción fijados cada año. La razón de que esto sea un problema es básicamente que el sistema nunca funciona de manera uniforme, debido a que los primeros meses del año el Programa de Control Suplementario (SCP) afecta la normal operación de la planta. El SCP fue implementado por la empresa para controlar y reducir las emisiones de SO2 de la fundición hacia las zonas pobladas durante condiciones meteorológicas desfavorables. Esto significa que los convertidores dejan de operar durante estos periodos de tiempo. En ese sentido, la fundición con la finalidad de cumplir con los planes anuales de fusión de concentrados y producción de cobre blister acumula altos inventarios en proceso como mata fría la primera mitad del año, los mismos que se tratan de procesar en la segunda mitad del año. Sin embargo, el manejo de altos inventarios en proceso incrementa los costos y consume el flujo de efectivo. Por ello, el objetivo del presente trabajo radica en incrementar el beneficio económico de las operaciones de la Fundición a través de una mayor producción de cobre blister en la Southern Perú Copper Corporation y así optimizar el obstáculo de las operaciones en la planta de Fundición, donde se incrementa la producción de cobre blister.

Jul 31, 2003

"El siguiente texto señala las etapas que comprende el proceso electrolítico del zinc empleado en la Cerro de Pasco Corporation, así como la importancia de la aplicación de este método de obtención en el 40% de la producción mundial. El tratamiento electrolítico del zinc se realiza en seis etapas: tostación, lixiviación, filtración, purificación, electrolisis, fundición y moldeo. La tostación convierte el sulfuro de zinc en óxido y depende de esta primera fase la mayor recuperación del zinc. En este proceso, el concentrado se divide en dos roasters tipo Wedge con capacidad para 60 toneladas cada una. Posteriormente este aire del concentrado, es tomado de la atmósfera y conducido a la columna central del roaater a través de una tubería con válvula y un manómetro de agua, que sirve para reguiar la presión del aire a 5.8 pulgadas. Dicha presión está calculada en función del volumen de aire necesario para la oxidación. Posteriormente la lixiviación disuelve la calcina en el electrolito gastado que sale de las celdas (155 - 73-gramos de ácido sulfúrico por litro y 55 gramos de zinc) para así eliminar impurezas tales como el fierro, arsénico y antimonio con bióxido de manganeso. La tercera etapa denominada filtración separa la materia insoluble de la solución del sulfato de zinc, a través de 6 filtros rotatorios de armadura metálica de tipo Burt de 5 pies de diámetro y 40 de largo. La purificación disminuye las impurezas como el Cu y Cd, hasta un máximo de 0.5 mg/lt, reduciendo el zinc a un polvo finísimo. Para el desarrollo de la electrólisis se utlizan tanques como celdas electrolíticas, un equipo de fuerza de dos transformadores y electrodos (anodos y cátodos), elecrolitos y reactivos. La sección de fundición y moldeo, forma los cátodos de zinc para su moldeo en barras de forma comercial, con un peso de 25 kilos cada una. En consecuencia, la factibilidad de este método radica en su simplificidad y economía, debido a la calidad de sus concentrados, como en el número(2) de purificaciones realizadas. "

Jul 20, 1957

By N. Mendoza, B. Nohtani

Kalegar Project is a copper porphyry system with gold-copper structures. The system is located in southeastern Iran, about 170Km NW of Zahedan city, capital of Sistan and Baluchistan Province. The Project is near the highly deformed and tectonized Lut Block and flysch zone. This type of mineralization is related to regional tensional structures and a pull apart basin. Hydrothermal alteration extends (4.5km x 1km), with an EW tendency. The alteration is predominantly moderate silica-clay with restricted silica pyrophyllite alteration and it is related to ‘B’ banded quartz veinlets. These alterations occur in a dacitic unit, heterolithic breccia sequences and early porphyritic andesite. It may be related to a postulated productive porphyry system at depth.

May 1, 2008

By Marcell Silveira, Jeff Loeb

Controlling ore contacts prior to excavation is essential to ensuring material types reach the correct downstream locations, so that optimal ore recovery is achieved. This practice is especially pertinent to narrow vein or structurally controlled deposits where very small discrepancies between the assumed and actual locations of the ore contacts can translate to significant ore loss or dilution. However, whether a mine’s priority is to minimize (i) ore loss, (ii) dilution, (iii) contamination, or (iv) adhering to strict blending requirements, blast movement is a problem for every mine, even those situated in massive, gradational deposits.

Sep 1, 2017

By Edmundo Alfaro

The paper describes the thiosulfate process for gold leaching like the best non-polluting alternative to cyanide. Thiosulfate is a non-toxic lixiviant and has the ability to complex gold and silver. Copper bearing ores are not harmful for the process and does not suffer the preg-robbing phenomenon like in the case of cyanide. Nevertheless, the process is not fully developed, basically because of the poor understanding of the solution chemistry. Upon thermodynamic considerations and experimental evaluations it was found that the system is unstable; thiosulfate oxidation is unavoidable and ammonia is lost by evaporation. Measures to reduce thiosulfate oxidation include the adequate balance of ammonia and thiosulfate concentrations, adequate pH, additions of sulfite and additions of complexing agents like glycine.

Sep 12, 2005

By Armando Diaz

Vedanta Resources plc is a London listed diversified metals and mining group. The group produces aluminium, copper, zinc, lead and iron; also commercial energy. In this sense, the paper show all the steps on how this expansion is going on, because is the beginning of the plan.

Sep 12, 2011

By Chris Twigge

The paper point out development and successful commercial introduction of new technologies into a metalurgicall. The discussion that follows examines the overall issues of implementation from a management perspectiva and will highlight areas where key success factors are often overlooked. The framework presented is structured around the following key themes: The prime incentive for introducing new technologies is broadly one of economics, the implementation of new technologies is, to a large degree, a process of risk management and although the implementation of new technologies revolves around technical and economic issues, in the end the decisiva factor is people. Proper recognition of the human factors is critical to success. In this sense, the above principles are discussed in the sections that follow and include a number of examples to illustrate how technology can be successfully implementad and how it can fail.

Oct 6, 1999

By George Shou

"The paper point out about economics of thickened tailings transportation. In this sense, the optimal concentration is determined based on the balance between the incremental costs of thickening and transportation and theincremental environmental benefits. A detailed feasibility study is essential for financial success of a tailings project. Hydraulics modeling is the key to estimate the transportation cost curve. "

Jul 31, 2003

By Thomas F. Kerr

The La Quinua mill at the Yanacocha mine in Peru has a thickened tailings storage facility that is contained entirely within an active heap leach pad. In this respect, it is unique and unprecedented in the mining industry and provides the operator, Minera Yanacocha S.R.L. (MYRSL), with certain cost, land-use and closure efficiencies. The combined design requires that the leach ore embankments retaining the tailings provide the same high level of stability and security required of major tailings dams. Contrary to standard tailings dam construction, the leach ore in these embankments is placed in thick, uncompacted lifts so that they maintain adequate permeability for leaching. The resultant loose structure makes static and dynamic liquefaction a critical issue, and the key design principle for avoiding a liquefaction related failure is to keep the ore that is saturated or very near saturated when under leach well removed from the outer faces of the embankments and contained behind large unsaturated structural shells.

Sep 14, 2009

By J. Hantelmann

The Yanaquihua gold-bearing vein-fault deposit is associated with a sinistral strike-slip fault system, hosted within granite to granodiorite of the Tiabaya Super Unit of the Coastal batholith. The deposit is located near the northwest striking Cincha-Lluta-Incapuquio (System 11) regional fault system . Mineralization exhibits vertical trends and is primarily controlled by sub-vertical vein-fault structures. Mineralization includes variably abundant quartz, clay minerals, pyrite, calcite.

May 1, 2008

By Roger Henning

Although flotation is widely used throughout the minerals industry, it is a relatively inefficient process. The economic benefits of improved operation are considerable. A multivariable level stabilising system has been developed to reduce the amount of fluctuation in flotation levels. It has been shown on several plants that the better level control leads to improved metallurgical performance. A level measurement based on conductivity is also described. The device provides some insight into the behaviour of the froth.

May 25, 1998

By Timo Toma

Hitherto flotation machines have by and large been operated and coaxed to best performance through the human endowments of sight and problem solving ability. A new device that measures accurately distinct froth characteristics on-line is now revealing fresh insights into the complexity of the froth removal, at the same time showing promise as a practical tool for the automation of stable control as well as flotation machine and flotation circuit performance optimization. The FrothMasterTM is introduced. Actual plant results are shown and discussed. A functional and practical leading edge solution to flotation machine control automation is presented.

Aug 25, 2002

By Enrique Rubio

Mine planning is the discipline of mining engineering that transforms geological resources into the best productive business for the owner. The production schedule is the best reflection of the company's business plan, which reflects the strategic, tactical and operational objectives to reach the defined production targets subject to the restrictions imposed by the mineral resource, by access to capital, medium environmental, market, technology and others. Traditionally the process of mine planning has been carried out through multiple steps generally disjointed and not with a clear connection with the ultimate goal that is to carry out a mining business.

Sep 1, 2017

By B. Whistler

The Alpala porphyry copper-gold deposit is a recent discovery located in the Imbabura Province of northwestern Ecuador. The drilling of seventeen diamond core holes over a 900 m by 400 m area has defined a northwesterly-trending, steeply northeast-dipping dike-stock complex of diorite to quartz diorite that exceeds 1300 m in height. This intrusive complex is hosted by a sequence of andesitic volcaniclastic rocks and lavas. The host-rocks are interpreted to be part of the Paleocene to Late Eocene Macuchi Formation (BGS-CODIGEM, 1997; Cruz, 2007). The best drill intercept to date is 1312 m at 0.67 % Cu and 0.63 g/t Au from 128 m depth in CSD-15-012, which includes 576 m at 1.03 % Cu and 1.19 g/t Au.

May 1, 2008

By Pierre Shields, Luiggi Sassarini, Richard Zandstra, Thomas Li

The intent of this paper is to demystify the mythology which often confront mine owners and engineers faced with this dubious question “Is it better to develop or continue a ramp or make a vertical shaft to access the new ore body of interest?” trough out measuring risk and return using probabilistic analysis and unhidden cost the affect long term decision such ventilation.

Sep 1, 2017

By Félix García

The Yanacocha Operation is an open pit gold mining operation located in mountainous terrain in Northern Perú. Given constraints imposed by the topography and the permitted boundaries, the efficient use of space is a priority for the Operation. Gold extraction from some ore types involves leaching, and the construction of heap leach facilities (HLF). The construction of HLF over a waste rock facility (WRF) is an example of a design driven by the need to use space efficiently. Liner grades that promote controlled drainage of leach solution, and drainage infrastructure are essential in HLF design. With this in mind, accounting for settlements in the waste rock and the native soils that form the WRF foundation were particularly important for this application. The facility continues to function in accordance with the design. This concept permitted important cost savings, and provided useful HLF capacity for the Yanacocha Operation.

Oct 21, 2015