Search Documents

By Wills BA, Barley RW

A brief description of viscosity measuring devices used in Dense Media Separation (DMS) plants is given, including a new On-line viscometer system. The various factors which affect suspension viscosity are identified. The effect of temperature variation on viscosity and viscosity measurement is examined in detail. Practical problems in using a modified Stormer viscometer for laboratory testwork are noted. Likely problems of continuous viscosity measurements are also discussed.

Jan 1, 1987

The major heavy industrial consumers of limestone are the cement, lime'and steel ind- ustries. Each of these requires large quantities of cheap raw material. Other ind- ustries such as glass and chemical manufactur- ing are significant consumers and agricultur- al and constructional activities provide additional demand which is usually more local in its occurrence. Limestone is widely dis- tributed throughout Australia but location in relation to major markets, and transport con- siderations render most deposits of no economic value. Among deposits which are sufficiently close to the major metropolitan markets many must be rejected as being unsuitable on grounds of quality, inadequate size for major.develop- ment, or other reasons such as environmental considerations. The major producing locations are sit- uated in a variety of geological environments. Most have limited reserves and require partic- ular attention to quality control. Planned extraction programmes based on detailed geo- logical investigations enable not only satis- factory grade control but also permit, by the adoption of appropriate quarry procedures, the use of sub-grade material, thus optimis- ing utilisation of the available reserves.

Jan 1, 1976

By Ingham PD

Selection of equipment for a mining operation, such as Mount Isa Mines, requires certain parameters to be correctly defined. Management control is essential for monitoring, improving and future purchase of equipment. Some research is being done independent of supply manufacturers. Observations about future outlook are made.

Jan 1, 1982

By Skinner A. J, Thoman B. C

The general structure of microprocessors and their method of use is described, and de- tails given of their application in two parti- cular examples of instrumentation for mineral concentrators. One is in a pulp density gauge, and using this example, the way in which a microprocessor-based unit can be made to be self-calibrating is described. The other is in an on-stream analysis detector for uranium in solvent, where a microprocessor is used to re- place a mini-computer.

Jan 1, 1977

For decades strip mining with discon tinuously operating 'draglines and shovels has been the most economical operation method in the shallow hard coal opencast mines of Aust- ralia, North-America and some other countries. Continuously operating equipment such as bucket chain excavators and bucket wheel excavators in combination with conveyor belt systems, conveyor bridges and stackers had been deve- loped in Germany; during the last 25 years this type of equipment has been further developed in order to allow a high degree of rationaliza= tion as to opencast mines in unconsolidated overburden in Germany, in many European couh- tries, in India and in Victoria. The differing compactness of the layers to be mined, the increasing mining depth, the adverse over- burden to coal ratio and geotechnical con- ditions account for the combined use of con- tinuously and discontinuously operating equip- ment and systems. This paper is to demonstrate some projects showing the combination of continuously and discontinuously operating equipment which aims at optimizing opencast mine operations. It will be reported on the following combinations: - combined use of bucket wheel excavator/

Jan 1, 1981

Over the last decade mineral exploration in New South Wales has increased markedly. This is due to various factors including the influx of overseas companies an. capital, increase and stabilization of metal prices and improvements in exploration techniques. The initiation of full-scale petroleum exploration and recent discoveries of large mineral deposits in the west, north-west and north of Australia has increased overseas capital, and brought scientists and technicians into the country. Naturally there has been an overflow into New South Wales, which is less attractive as an area for new and large-scale discoveries. In some fields, rise in metal prices and price stabilization has largely contributed to the intensif- ication of exploration. Increased tin production in New South Wales since 1963 is a direct result of price rise and stabilization, and rise in the price of silver has revived an interest in silver prospecting in recent Years,

Jan 1, 1969

Increasing attention is being focussed worldwide on the strategic environmental assessment of mining projects, including consideration of cumulative environmental effects. In New Zealand there is now an end in sight for inappropriate delays in resource consent approval of responsible mining projects. This paper investigates six case examples of recently consented mining and quarrying projects, whose applications were notified. It also explores the nature of delays that occurred, the factors that contributed to the delays, and whether the consent process delivered fair and effective public participation and desirable environmental outcomes.

Jan 1, 2005

As a number of underground fires have unfortunately happened in the Broken Hill mining district, the writer trusts that a paper dealing with such a subject may prove of interest. To simplify matters, the subject is classed under three mainheadings- I Origin of fires; II Methods of subduing them; III Precautions to minimize the risk of their occurrence.Underground fires may be started in three ways - arson, spontaneous combustion, or carelessness.With regard to the first-mentioned cause, direct evidence is usually lacking to prove that any fire has been caused maliciously; Though definite proof of spontaneous combustion having been the cause of a mine fire has not been brought forward, nevertheless it should be considered, especially in the case of sulphide ore bodies of a more or less friable nature. The writer has been informed on reliable authority that in an open stope on the...

Jan 1, 1911

Hong Kong continues to display a remarkable enthusiasm for undertaking ambitious tunnelling schemes despite apparent recessions in the Asian economy. This paper provides an outline of tunnel projects currently under construction, those recently tendered and a glimpse of the extent of forthcoming projects which, according to Government sources, carry a price tag of HK$ 200B. Committed works will cost about HK$ 15B and involve a variety of TBM and drill and blast tunnels. These include the recently tendered works for KCRCÆs West Rail and MTRCÆs Tseung Kwan O railway extension, together with five no retendered TBM drives for the Strategic Sewage Disposal Scheme (SSDS) following forfeiture of the works by the Campenon Bernard-Maeda JV in mid-1997. The JV claimed unreasonable specifications leading to unacceptable levels of water inflow and dangerous working conditions. Key technical issues that are now arising in Hong Kong are:the general use of design and build contracts for bored tunnel contracts;a trend to accept TBM options for relatively short drives in urban areas;the use of æfixed-priceÆ contracts which in the current competitive market, can encourage tenderers to take contractors to take very high risks; andthe difficulty of predicting and managing water inflows in rock tunnels.This paper also includes a new empirical method of predicting water inflows in rock tunnels, and makes recommendations for managing these on-site.

Jan 1, 1999

By Clark IH

Numerical modelling is an effective aid for the planning and design of underground coal mines. With funding from the National Energy Research Development and Demonstration Program, CSIRO Division of Geomechanics has produced a workstation environment which will allow the Australian Coal Mining Industry access to a wide range of numerical design models. The emphasis is on usability and simplicity and the long-term aim is that the techniques should be used routinely at the mine site, so that, in the future, design of a new underground mine will routinely involve modelling of each proposed layout.Each of the five numerical analysis programs, FESOFt, FLAC, MNLAY, FEBLK and UDEC has both strengths and weaknesses. Some analyses with each program demonstrate areas when; observed in situ behaviour in underground coal mines has been successfully modelled, and the results of site monitoring provide a basis for comparison with the predictions of numerical models.

Jan 1, 1991

The grade (or value) to volume relationship which constitutes a target orebody is used to show that the concentration of diamonds in an economic deposit may be as low as O.Olg/t. Diamond valuations from an Indonesian deposit demonstrate that the largest 5% of the diamonds in the deposit contributed 25% of the mass of diamonds recovered and 70% of the value from the ore. The need to consider the large stone content and the probability of recovery is used to estimate that the sampling density is required to be as high as 4-10,000ppm for a VLC deposit. This is compared with an acceptable sampling density for a bauxite deposit of 700ppb. A case history of the discovery of a diamond bearing paleo-channel in the Ellendale field in Western Australia illustrates that the sampling task becomes impractical. It requires an excavation in excess of 300,000 bcm of material to prove a 5M hem ore reserve. The conclusion is reached that setting up a small scale mining operation is an appropriate method of proving such an ore reserve and that the Code of Reporting should allow a category of "Mineable Resource" to cover such a situation.

Jan 1, 1990

This work describes preliminary laboratory testwork to study the relative leaching response to cyanidation and thiourea leaching of an oxidised low grade gold ore. The potential of an alternative lixiviant like thiourea to commercial processing of mine dumps is discussed by specific reference to selected case histories. It would appear that on the basis of the available published information, there could well be a case advanced for the acid thiourea leaching of sulphide concentrate tailings being subjected

Jan 1, 1994

By Gregg PEH, Horne D, Bolan N, Stewart RB

The Tui mine site is situated on the NW flank of Mt. Te Aroha, at approximately 400 m altitude. During underground mining operations two lead-copper-zinc ore bodies were exploited and processed on site. The legacy of the mining operation is a barren dam containing over 100,000 m3 of sulphide-rich tailings. The Tui mine site is arguably the worst case of environmental degradation resulting from past mining activity in New Zealand. Although the impacted area (approximately 4 ha) is extremely small by international standards, acid mine drainage (AMD) emanating from the abandoned tailings dam and mine adits has severely contaminated local streams and prevented natural plant recolonisation of the site for more than 20 years.

Jan 1, 1995

The on-going technical developments to enhance the productivity and cost effectiveness of large blasthole drills incorporate many of the blasthole drilling operating experiences garnered over the past half century.Those experiences have shown in part that on a drill unit with good quality structural elements the higher the percentage of the electrical and electronic components designed into the product, the higher its productivity and the lower its operating cost.

Jan 1, 1992

By D J. Clark, S Hewson, T Li

Cadia Hill Pit is a gold copper porphyry deposit hosted in monzonite. The pit slope design is primarily based on structural controls related to faults and shears with largely massive rock masses between the structures. The slope design attempts to achieve an optimum configuration at a bench to overall scale, considering economics and safety implications against the geotechnical and structural conditions. To date the slopes have been mined at interramp angles of up to 60¦ over heights of 120 m. Limited slope and batter failures that have occurred are structurally controlled and occur rapidly. The pit-mining schedule requires concurrent mining of part of the final pit walls and the progressive interim cutbacks. Engineering and operational solutions to hazard reduction and risk management issues have been implemented wherever viable to æengineerÆ out the hazard and mitigate the risks. However, comprehensive management plans and operating procedures have also played a vital role. This paper details the management plan and the operating procedures that have been developed and implemented to mitigate the risks associated with rock falls.

Jan 1, 2003

Water is a key resource input to copper heap leach operations in both quality and quantity. A number of recent developments in analysis of the technology have shown that water consumption can be optimised. The leach consumption has been generally considered in terms of minimisation of the evaporative loss by changing the application method (drippers or wobblers). Modelling of the irrigation effects on leach rate has shown that the poorer surface coverage from drippers has an adverse effect on the leach extraction rate. This is particularly evident in the early part of the leach. The use of different irrigation systems during alternate parts of the leach cycle can have benefits in minimising the water consumption without an unacceptable outcome from extended extraction times. By combining the leach rate effect with the evaporative loss estimates, an economic decision matrix can be generated to allow the operator to select an appropriate leach irrigation strategy, combining both irrigation delivery and irrigation rate. In the SX-EW plant, the total quantity of EW bleed and SX scrub stage bleed (both for iron control) can be reduced to an absolute minimum. The economic minimum may be different depending on the cost of producing the high-quality water used to replace the bleed streams. Adjustment of the SX process, in particular use of multiple entrainment control steps, can provide significant reductions in the total bleed and make up requirements.

Jan 1, 2003

In engineering applications of explosives for rock breaking, the released energy is expended mainly into heat, rock crushing and fracturing, seismic waves, air blast, and noise. Those parts of energy which pass into seismic waves and air wave create environmental problems since they are transmitted away from the blast site. In order to predict the environmental effects accurately, one must be able to predict the energy distribution at the source. The energy distribution at the source is significantly controlled by the blast constriction. Consequently, the accuracy of prediction and control of ground vibrations generated by blasting is affected by various matrices of blasting constriction.

Jan 1, 1986

The impact on metallurgical operations of the hydrocarbon energy price hike can be greatly alleviated by recourse to alternative fuels. Information is provided on fuels such as coal, coke, coal-oil mixtures, manufactured gas, wood and charcoal; techniques such as direct and indirect combustion, pulverised fuel injection, slurry burning, fluid bed combustion and various gasification processes. Actual examples of metallurgical operations are used.

Jan 1, 1981

As part of a prefeasibility study being undertaken by Newcrest Mining Limited, the Cadia East Implementation Team has developed an access decline to the proposed underground operation. This paper describes new technologies that have been employed in this development, which include: high frequency drifters that have penetration rates one and a half times that of competitors, ensuring minimal increase in drill time, despite rounds greater than 5.5 m;automated drilling used in conjunction with laser navigation and face pattern design software, which facilitates exact positioning of hole collars, lengths and lookouts for accuracy and repeatability; andemulsion charging that reduces manual handling; has variable string loading capabilities, via its hose retraction system, for perimeter control and reduced fume characteristics. A Six Sigma improvement process was used to support the system change undertaken and demonstrated that development rates improved 60 per cent above the comparable single heading benchmark.

Jan 1, 2008

By B R. Olsson, N Marinopoulos

To establish the design and the capacity of the Stanwell Magnesium Plant, Australian Magnesium Corporation Ltd (AMC) with Fluor Australia has modelled the operation of the magnesium plant using ARENA Simulation Modelling. The reliability model has been used to evaluate: surge capacities required between different sections of the plant; critical equipment requiring standby capacity; the number of trains required for different sections of the plant; and potential capital cost reduction options. The reliability model was established using the detailed Process Flow Diagrams, reliability information from literature and maintenance, operation and start-up experience from the Demonstration Plant. The model was run with different plant configurations to assist AMC in determining the most effective configuration to provide the production capacity at the lowest capital cost. The model was not only able to confirm the plant capacity to the independent technical expert but was able to minimise quantitative risk by minimising the quantities of hazardous materials on site. Fluor Australia provided the ARENA simulation expertise and has used this software for optimising new plant design and to establish improvements in operating plants. Reliability modelling is a normal feature of chemical plant design but is rarely used in the resource industry. The experience gained by AMC in the modelling system has indicated that metallurgical plant design can be improved by the application of reliability modelling.

Jan 1, 2002