Search Documents

By Parley Potter

GENTLEMEN OF THE COAL MINTING INSTITUTE: I was requested to write an article on mining a short time ago; however, the time has been so short that I have not had time to prepare an article as I would like to have presented it to this body. In writing this article it has not been my intention in making comparison of various mines, to favor one or discredit the other. I hope it will be considered in that light. The coal mining industry as I have seen it in the past, at present and in the future. In years gone by large tracts of coal land could be obtained at a very small cost, and as yet coal land may be purchased at a reasonable price in this country, but I believe the time is near at hand when the methods of mining will have to be changed greatly in this country. Many changes have taken place-in the last few years, some of them have been forced by law, others by the coal operators themselves, after being convinced that the changes made were for their own benefit. During my 20 years in the mines I have seen thousands and thousands of tons of coal lost that could have been saved if proper methods of mining had been used. The Room and Pillar system of mining coal is none. too good at its best ; a certain per cent of the coal is always lost, yet it is about the only system that can be used under certain conditions, but where the Longwall system can be used I believe it is the best system yet introduced. If the Longwall system is used' there is no coal lost. You get it all as you advance with the workings. Some coal operators object to the Longwall system for several reasons, and most of the reasons they advance are not founded on facts. For instance some of them claim it is too expensive. I will admit that the cost per ton is a little higher in Longwall than it is in Room and Pillar as a rule for the amount of coal' mined, but after the Room and Pillar mine is finished as a rule there are thousands of tons of good coal lost, for the simple reason that it cannot be mined at a profit. In many cases if the same mine had been operated on the Longwall system every ton of saleable coal could have been mined at a fair profit, and in the long run would have netted the owner much more money than it did under the Room and Pillar system. The Longwall system has been in operation many years in Europe and especially Great Britain, and is the most approved of systems in many countries at the present time. Millions of tons of coal have been saved by its use in those countries. It is claimed that the Armour Packing Company loses nothing but the squeal of the hog when it is killed, and doesn't allow it to squeal much. Why lose coal if the Longwall system of mining will save it? The Longwall mine is far more easy to ventilate than the Room and Pillar mine; the air has a much less distance to travel for the same amount of working face in Longwall than it has in the Room and Pillar.

Jan 1, 1921

By C. E. Drennan

Your Chairman and the Program Committee have limited the time allotted to me, and so, with your permission, I will omit the preliminaries, and wade right into my subject. I believe I am safe in taking for granted that you are all agreed that electricity is the most feasible means of transmitting the power used in coal mining. If you are not, then the papers read before the Association in previous years have failed of their object. If you are so convinced, the only question is as to the choice between alternating and direct current, and the voltage. Fundamentally, this is primarily a matter of dollars and cents. With the sole exception of your trolley locomotives, there is no part of your equipment that cannot be operated as well on alternating as on direct current. With your pay rolls at their present high level and the efficiency of the labor you employ at the stage it now occupies, I believe you will agree, first, that everything possible must be done to increase the tons of coal produced per man employed; and, second, that ample power at all times must be available at every machine so that every one of your men can really get out a day's work without any avoidable delay. Speaking Electrically, all this means is a machine instead of a man wherever it is possible for a machine to do a man's work, and full voltage at the machine always, so that there can be no excuse for the work not being done promptly and efficiently-and dependably. The real reason for the selection of one kind of current or the other can best be understood by considering the formula which determines the size of wire required for transmitting electrical energy. The size of the copper required, and, consequently; its weight and cost, depends upon four factors: 1. The amount of energy or power to be transmitted. 2. The distance to be covered. 3. The percentage of loss allowed. 4. The voltage at the receiving end of the line. These factors enter into the problem to different extents, and, briefly, the size of wire depends directly upon the amount of power and the distance transmitted, and inversely upon the percentage of loss allowed and the square of the voltage. From this it will be seen that, with the amount of power and the distance fixed, if the loss is to be cut in two, the wire must be doubled with a given voltage, while if the loss remains constant and the voltage is doubled, the wire may be cut in four; that is, reduced 75 per cent in weight and cost. Now, standard motors are designed and recommended by their builders to run within a range of 10 per cent under voltage to 10 per cent above voltage - 440-volt motor, then, should preferably not be operated on less than 400 volts

Jan 1, 1923

The fifth Annual RMCMI Mine Rescue Evaluation was held June 29 through July 2 in conjunction with the 92nd RMCMI Convention. Eight teams from four states participated. They were: BHP La Plata Mine NM Capt. Jonathon Sorrell BHP Navajo Mine NM Capt. Ron Miller BHP San Juan Mine NM Capt. Albert Nelson Bridger Coal Company WY Capt. Ted Laughlin Coteau Properties Co ND Capt. Terry Davis Kerr-McGee Coal Corp WY Capt. Elvin Stanton Sabine Mining Company TX Capt. Spencer Thompson Solvay Minerals WY Capt. Ray Blaisdell Activities started with a Rope Rescue class taught by John Peleaux, from Innovative Access, at 1:00 p.m. on Saturday. The Mine Rescue Reception, Team Meeting, and Equipment Inspection was held Saturday evening. All participants received a T-shirt and cap. The Mine Rescue Evaluation started Sunday morning and ran until it was rained out around 3:00 p.m. There was a team swap meet Sunday evening at which teams bought extra caps and shirts. They also traded with other teams. [ ] The Evaluation resumed Monday morning and ran until mid-afternoon. The Evaluation was made up of seven stations. There were six scenarios and a written test. Teams were also challenged by a 14-foot confidence course wall to get their team over. The teams were evaluated by: Jack Knight Champion International, Pensacola, FL Becki Pickert Colorado Northwestern Community College, Craig, CO John Peleaux Innovative Access, Evergreen, CO Lynn Busskohl Kerr-McGee Coal Corp., Gillette, WY Lenny Altenburg Kerr-McGee Coal Corp., Gillette, WY Elvin Stanton Kerr-McGee Coal Corp., Gillette, WY Clarence Baker Kerr-McGee Coal Corp., Gillette, WY The victims for the scenarios were from the Kerr-McGee Mine Rescue-Team. They were: Dana Cooper, Doland Zink, Suzanne Ott, Mike Szuma, and Craig Moore. Also helping as a victim was Candy Cobb from Casper, WY. [ ] The program concluded Tuesday morning with the Awards Breakfast. A medical kit, donated by Strategic Supply, was given to the Solvay Minerals Team for the fastest time over the confidence wall. Engraved stone awards were given to the teams indicating the rating they achieved. Four teams received Level Ill (The highest rating) and three received Level II. The Kerr-McGee team also received an award for helping put on the evaluation. Additional stones were presented to Jack Knight, John Peleaux, Becki Pickert, and RMCMI President. Marcie Greenberg. The current plans for the 1997 Mine Rescue program are that Jim Andrews with Colowyo Coal will assume the chairmanship. Goals for next year are to increase funding and participation by establishing sub-committees or task groups. With the chair located in Colorado, coordination of the evaluation should be easier. Comments from all the teams were positive and they intend to return next year at Steamboat Springs. [ ]

Jan 1, 1996

(The following discussion took place on this screen lecture in the dark.) MR. SHUBART: Would you give us a little .explanation as to the operation of this machine and what you are doing with it? MR. TESCHER: There is a 20- horsepower motor, rheostat, crusher, and a fan mounted on one base plate and operating on one shaft. The fan is overhung on the shaft. The only bearings you have are the bearings on each side of the crusher and the motor hearings. On one side of the ma- chine there is an opening for feeding shale. The machine is operated at 1,200 revolution per minute and as the shale is pulverized, the fan automatically exhausts fine dust from the crusher from an opening in the top of the crusher. The machine pulverizes 3,000 pounds in eight hours, reducing the materid to one hundred mesh. The last ma- chine we put in has been operating continuously fifteen hours a day for the past sixty days, without repairs of any kind. PRESIDENT LITTLEJOHN: Where is the machine in operation? MR. TESCHER. At the Royal mine. We have used ordinary mining ma- chine cable in local movements of the machines. This has enabled us to have twenty-two locations throughout the mines. The mine is highly gaesous, and the machines had to be placed on intake air. MR. SHUBSRT: What type of crusher do you use? MR. TESCHER. A No. 16 Universal, operating at 1,200 revolution per minute. M. SHURART: What material do you feed to it? MR. TESCHER: We have shale three-quarters of a mile from the mine. In the winter months we have been troubled with moisture. We build a kiln and get this shale and load it into the kiln for drying and then place it into a pit car and take it into the mine. The material must be dry. We have also used slate in the mine and have had good success. The slate at the mine is fairly hard. I presume, however, that the slate will probably carry a high silica content. MR. SHUBART: Mr. Harrington claims that silica does not do the harm, as was formerly supposed. MR. TESCHER: There is still a question as to whether it is harmful or not. PRESIDENT LITTLEJOHN: Are there any of these machines in operation closer than Aguilar? MR. TESCHER: There is one at the Alamo mine. Mr. Quealy also purchased a couple of them for use at his Wyoming mines. PRESIDENT LITTLEJOHN: Are there any other questions you would like to ask Mr. Tescher regarding his rock dusting machine while it is on the table for discussion? MR. DALRYMPLE, SR.: How many men does it take to operate it? MR. TESCHER: One man operates the machine. Sometimes we put the

Jan 1, 1925

The Wednesday morning session was called to order by President Geiger at 9:30 a.m. He asked Stan Shubart to conduct the meeting. Stan thanked Loren Linville and Bill Grant for the excellent job they did in their assignments. He called on John Schmidt, Chairman of the Auditing Committee, to report on the financial statement of the treasurer. Mr. Schmidt read the data and asked for its approval. A motion was made, seconded and approved. Stan called on Joseph Berta, Chairman of the Resolutions Committee, who submitted the following resolutions: (1) RESOLVED: Whereas, in the year since the last convention of the Rocky Mountain Coal Mining Institute, the Institute and the coal mining industry generally have suffered the loss through death of the services of: Clement Audin, Jr. C. Herbert Clendenin Donald Haske William H. Hays M. J. Keenan Fred W. Koelling James Mecca Neil Robinson C. M. Shott

Jan 1, 1974

The third session of the Rocky Mountain Coal Mining Institute was called to order by Edward G. Fox, President of the Bitumious Coal Operators' Association, Washington, D. C., at 9:M A.M. He stated he had enjoyed being present at the Institute the past two years, and was honored to be asked to preside at this morning's session. Mr. Fox introduced Cloyd M. "DOC" Smith, Vice President of World Mining Consultants, Inc., Washington, D. C., whose talk, "World Trade in Coal" was illustrated with a number of graphs. (See Index.) M. E. "Shorty" Wade, Assistant Purchasing Agent, Kaiser Steel Corporation, Fontana, California, was introduced and gave a paper on "What Is Required to Realize Profits Through Purchasing." (See Index.) Mr. Fox suggested that all members take an active part in their association. He stated that much more can be done in association work than as a lone wolf. He urged all to support their organization and stay with it. It is for each member's good and not for the good of a few. Carl G. Schilbe, District Manager, Jeffrey Manufacturing Company, Columbus, Ohio, was introduced, and he presented a paper on "Results of a Study in Belt Idler Design -The Perma-Seal Idler." This paper was illustrated with a number of slides. (See Index.) "Operation of A-C Mines," was the topic covered by W. C. Painter, Service Engineer, Joy Manufacturing Company, Price, Utah. (See Index.) Each of the papers was well received, and presented a number of things valuable to all who heard them. Mr. Fox then turned the meeting back to President von Storch who read several announcements of committee meetings, and the meeting was adjourned at 11:30 A.M. for an afternoon of recreation before the banquet and dance that evening.

Jan 1, 1958

The 75th Regular Meeting of The Rocky Mountain Coal Mining Institute convened at The Mark Conference Center, Lionshead Village, Vail, Colorado, and was in session at 10:00 a.m. Past President, Shirl C. McArthur, President and General Manager, American Coal Company, Huntington, Utah, called the meeting to order. The membership was asked to stand and pledge allegiance to the flag. He introduced President Robert E. Murray, President, Western Division and Subsidiary Companies, The North American Coal Corporation, Bismarck, North Dakota. A biographical sketch follows: Since 1974, Mr. Murray has been President of the Western Division of The North American Coal Corporation, as well as President of The Falkirk Mining Company and The Coteau Properties Company, wholly-owned subsidiaries of North American. Previously, Mr. Murray, who has been associated with North American for twenty- three years, served as Vice President-Operations, Vice President - Eastern Division, and Assistant to the President of the Company. In these positions, he was responsible for North American operations in Pennsylvania, North Dakota and Utah.

Jan 1, 1979

The Wednesday morning session was called to order by President Lewis at 9:00 am, He called on Bob Wilson to conduct the business meeting. In the absence of any of the Auditing Committee, the treasurer's report, which had previously been examined by them was read. He asked for a motion of approval. It was made, granted and approved. The Resolution Committee was called on to make its report. Mr. Shirl McArthur read the following report: (1) "WHEREAS, the Pneumoconiosis or Black Lung provisions of the Federal Coal Mine Health and Safety Act which have been construed and administered largely as a welfare program rather than as just compensation for occupational disease has resulted in enormous expenditures and commitments from the Federal Treasury, WHEREAS, the imposition of the full cost of future welfare oriented black lung awards on coal operators without regard to workmen's compensation standards and without due process in granting benefits is grossly unfair and discriminatory to the coal operator and places an undue burden on the present cost of coal,

Jan 1, 1973

PRESIDENT WHITESIDE: The chair will now throw the meeting open to discussion. GEO. B. PRYDE: In the old days at Rock Springs we had electric plants situated about half a mile from our mines; we had small boiler plants; we had an electric plant with about 600 kilowatt capacity. About ten years ago we discarded the old steam plants and started building towards a centralized power plant. We now have three 2,500-kilowatt turbine generators and one 1,000, and our peak load is about 7,000 kilowatts. We have had to rebuild the old power plant, scrap the old machines, and install water tube boilers. We did this as a matter of economy in a small local plant we had years ago, and it has grown to be a large central plant, supplying power for about 20,000 tons of coal daily, and distributing this power within a radius of twenty miles. We have found this method of power to be more economical than with the old plants, and the people who buy power from us in the Rock Springs field say it has been to their advantage also. We found this last year, when we had to shut down for five months, that that plant was the only plant operating in the Rock Springs field, supplying all the power, running of fans and pumping during the time the mines were shut down, and it helped the situation very much. We had an old wooden building which we had to tear down, raise the walls, and put on a steel roof; had to rebuild the boiler room and rebuild the boilers. The water situation at Rock Springs has never been very good; we get our water from wells 250 to 500 feet deep, and use one and one-quarter million gallons a week. We have two large spray ponds and we have gotten along well. There isn't any comparison between the central power station and the old method of making power. (Applause.) FRANK YOUNG: I listened with a great deal of pleasure to the paper just read, and it struck me it was remarkable how a paper prepared by anyone could be so nearly identical and coincide so very near with the experience of another. It is just like some work I have had. I had the engineering part to do for the power plant for ten years, and I think at that time we did all of the things that he mentioned in his paper. Also his analysis of the cost of power seems to me exactly right. If I had gathered the figures and made the statement myself I think it would have been very much the same as was read. The recommendation that it is better to buy

Jan 1, 1923

It was said that the coal operators are losing a great advantage in permitting the oil producers to take the domestic market away from them. Coal is so much less expensive and more economical than oil that even the oil producers themselves are burning coal under their stills. No longer is the housewife afraid of machinery. Not only does she operate an automobile, but in her home she is used to vacuum sweepers, washing machines, refrigerators, and multitudinous devices. She is no longer machine-shy. An electrically operated stoker, if properly introduced and guaranteed with only a fraction of the enthusiasm that the oil furnace salesman shows, would get a ready reception. Several devices now on the market are much less complicated, much less apt to get out of order, than the oil burners. In place of an increased cost for the sake of convenience, the stoker will give all this convenience at a decreased cost. So said Mr. Herres. He said, however, that it must be enclosed so that the working parts are not too much in evidence. MR. McAULIFFE: While it appears possible to adapt a continuous feed to the needs of the furnace in an apartment or a house burning thirty tons or more annually, it is not yet possible to get a furnace that would satisfy the home which burns only seven or eight tons in a season. A delegate described the Garrison stoker which is designed to care for this problem. Mr. Herres said that the Pacific Coal Company had a small stoker furnace more simple than the Harrington. Pulverized coal equipment is being adapted to use in apartment houses. The stoker designed by Lloyd Garrison, State Engineer of Utah, was described, and also one which Mr. G. W. Megeath of Omaha, Nebraska, had manufactured, which Mr. McAuliffe says, is recommended only for Rock Springs coal. It was brought out that there are over forty installations of the "Iran Fireman" in Salt Lake City. For apartment buildings, there is no question as to their satisfaction. Many of the down town office buildings are so heated.

Jan 1, 1925

Presiding-Thomas R. Young, President, Wyoming Fuel Company, Lakewood, Colorado. Mark Gillaspie, Vice President, San Marco Pipeline Company, Houston Natural Gas Company, Houston, Texas, presented a very interesting film-"Invocation in Coal Transportation-Black Mesa Coal Slurry Pipeline." (See index for printed text of Mark Gillaspie's remarks) * * * Kaye Kuhlmann, President of Citizens for Total Energy, San Jose, California, presented a paper-"Grass Roots Support for Energy Policy." (See index for printed text of Mrs. Kuhlmann's paper.) Mrs. Kuhlmann is President of Citizens for Total Energy, an International volunteer grassroots organization with the purpose of educating the public on energy alternatives. CITE strongly advocates responsible citizen participation in the establishment of energy policy.

Jan 1, 1980

PRESIDENT LITTLEJOHN: I have every reason to know Mr. Pryde was carrying out some experiment a while ago in some of his mines. He and I had a little correspondence on the question, and I think he may have a word or two to say about it. He has not been on his feet today at all. I will ask Mr. Pryde to tell us what he has to say. MR. PRYDE: I have not very much to say about shooting coal with permissible powder as far as slack is concerned because we are not in the commercial business. All of our coal goes to the railroad and a very large part of it is crushed for use in the stokers of the locomotives. We are on a 100 per cent permissible powder basis and as far as I am able to see, I do not believe that the percentage of slack is increasing with its use. We find it hard to convince our commercial neighbors of this fact because they are naturally very much against increasing their percentage of slack on ac- count of the low price received for this grade of coal. I, personally, believe that where a change is made from black powder to permissible powder the percentage of slack will be increased for a time because the miners have been accustomed to using black powder and they are rather suspicious about going to the permissible powder and I do not believe that we can blame them very much. So the tendency with them is to use too much powder. We have gradually overcome this, although, as I said before, we have not kept close track of the production of slack. However, we try to get as large an amount of lump coal as possible. Broadly speaking, I can say from observation that in my opinion there is very little difference in the percentage of slack with the use of the permissible powder that we have today than there was with the use of black powder. I also get this information from our mine superintendents. Mr. Peterson and the other explosive men have been very helpful to us in the use of permissible powder and I confess I have to take everything back that I said several years ago. At that time I was against permissible powder, particularly on account of the cost, but, with the newer permissible powder, we have gotten the cost down very well. I know today that the cost of permissible powder in the coal mines of the Union Pacific Coal Company is less than when we were using black powder. I know this because of the fact that we kept a record of the number of tons we got with black powder, and the number of tons we get with permissible powder compares very favorably in cost. I know this, too, because of the fact that our employes, except in the first few weeks of using permissible powder, have made no demand upon us for any in- crease ill pay to offset any added cost that might accrue in the use of permissible powder and the fact that they have asked for no increase is very conclusive proof to me that it is not

Jan 1, 1925

The Thirty-sixth, Regular Meeting of the Rocky Mountain Coal Mining Institute was called to order at the Shirley-Savoy Hotel, Denver, Colorado, Thursday, June 23, 1938, at 11:15 o'clock a.m., by Thomas Allen, Vice-President for Colorado, who announced that owing to the serious illness of Fritz Nyman's father, Mr. Nyman would be unable to attend the convention. Vice-President Allen welcomed the convention as a representative of Governor Ammons. Owing to the overlapping of a previous engagement, Mayor Benjamin F. Stapleton regretfully arrived too late to welcome the gathering in behalf of the City of Denver. Vice-President Allen selected Mr. F. W. Whiteside to preside at the morning session. On motion made, seconded and carried, the reading of the minutes of the Thirty-fifth Regular Meeting was dispensed with, inasmuch as they are printed in the proceedings. Chairman Whiteside suggested that the appointment of the personnel for the Committee on Resolutions, Nominating, Membership and Auditing be deferred until later in the meeting, and on motion made by Mr. Oliver, duly seconded and carried, this suggestion was adopted.

Jan 1, 1938

The 1942 meeting will be held in Salt Lake City, June 10,11, and 12, at the Hotel Utah. ... If you have any suggestions for the program, send them to the Secretary at once.

Jan 1, 1941

The 1932 meeting will be held June 8, 9 and 10 in the western section, place to be announced later. If you have any suggestions for the place or program; send them to the Secretary at once.

Jan 1, 1931

The 78th Regular Meeting of the Rocky Mountain Coal Mining Institute (hereafter referred to as RMCMI) convened at the Marriott's Mark Conference Center, Lionshead Village in Vail, Colorado. The meeting was called to order at 8:45 a.m. by the President, Ira E. McKeever, Jr., who is President, Western Mining Operations, Natural Resources Group, W. R. Grace & Co. McKeever was introduced by Past President Edward F. Ziolkowski, Senior Vice President and General Manager, Energy Development Company in Hanna, Wyoming. MR. ZIOLKOWSKI: The first order of business this morning is to introduce the president and for a business meeting as well as other items on the program. It is my pleasure to introduce Ira McKeever to you this morning. Ira was born and raised in Kit Carson, Colorado, and served in the U.S. Navy prior to obtaining his geological engineering degree in 1952 from Colorado School of Mines in Golden. He then spent the next 20 years involved in mining sulphur, pot ash and coal with Texas Gulf Sulphur at that time and Gulf Resources Chemical Corporation. In 1972 he joined W. R. Grace & Co. as president of the Mining Division, Natural Resources Group. He was named Colowyo Coal Company's president and general manager in 1976 to develop what is currently Colorado's largest coal surface mining operation. Last year he became W. R. Grace's president of Western Mining Operations which is the position he presently holds. Ira is active in civic affairs; he is currently serving on the Colorado Energy Impact Assistance Advisory Committee. He is a member of the Colorado's Metropolitan Water Roundtable, he is also a director of Project Colorado, a member of the committee for the Colorado Division of Commerce and Industry. He has, in the past, served as chair- man of the Craig Hospital Board. In 1967 Ira was the recipient of the Colorado School of Mines van Diest Gold Medal Award, and in 1981 was given the individual service award for outstanding accomplishments in the field of health, promotion, physical fitness by Colorado's Governor's Council for the Health and Promotion of Physical Fitness. Memberships are also held in Denver Coal Club, the Colorado Mining Association, and the American Mining Congress. Will you please welcome Ira McKeever? I do have one other piece of business here. If you will all join with me, yesterday was Ira's birthday. I asked what year that was, but I couldn't get that out. So, I'm not going to lead the singing. Someone is going to lead the singing. But I think it would be appropriate if we did sing happy birthday this morning and I think it would also wake us up. How's that? All right, will you join me please? (A chorus of the Happy Birthday song followed.) President McKeever's address: MR. McKEEVER: The secret is that I'm double nickles. So I've got a few more years hopefully to be with you and this wonderful industry that we represent. Thank you Ed. I realize now more than ever, the tremendous effort that you put in the program last year and the magnitude of the job that is placed in the presidency of the Institute. It was indeed with tremulous hands that I undertook to lead the Institute this year, and I found a tremendous amount of strength and guidance in my friend Ed whom we've known since college days and worked together. On behalf of that lifetime of memories and good thoughts, Ed, I would like to present to you a little token of appreciation. 1 would like to join Ed in welcoming you all to Vail. Ed arranged the weather, 1 arranged the program along with Charlie Margolf. This is the 70th regular meeting of the Rocky Mountain Coal Mining Institute; and in accepting the leadership a year ago, 1 obligated one very special person to fill the role of chairlady and hostess for this meeting. I would like to have you all, if you haven't already, meet my wife, Linda. I would like to thank her publicly for her guidance and help she continues to provide me. It's absolutely necessary that you also meet and recognize Charlie Margolf our program chairman who will be helping through the meeting to present and monitor our program; and anyone who knows Charlie knows the sincerity and dedication he brings to anything or any phase of life he touches. We will be seeing him in action this afternoon when he chairs the most interesting panel presentations. Don't miss it if you can help it. A couple of logistical comments. We will have to keep our meeting on schedule so that any of our non-agenda items that we need to keep, maybe we

Jan 1, 1982

By R. S. Morton

MR. CHAIRMAN AND GENTLEMEN: To be invited to address the members of The Rocky Mountain Coal Mining Institute on a particular subject is an honor I sincerely appreciate. The subject of this paper is, ?The Advantages of Having Such Men as the Fireboss Under State, Rather Than Corporation Jurisdiction." On the fireboss, primarily, depends the safety of the mine. When all the rest of the mine workers are still comfortably sleeping in the wee small hours of the morning the fireboss steals noiselessly away, from his bed to take up his daily task, a tour of inspection. He enters the mine, he inspects alone they workings that will be filled with men whose safety is in his keeping. Loyal to his fellow men and responsibilities of his position; he seeks for danger in every place, on every road and travelingway; going over caves, through dangerous places where none of the others are expected or allowed to go alone. How many of us give a thought to these dangers and the faithful work that this guardian performs for our safety. After the fireboss has made this round of inspection, he reports all the dangerous places to the foreman and enters them in the book; he is supposed to have performed his duties; he has no authority to enforce his recommendations. He has found a number of rooms that have not been timebered as they should be for the safety of the digger; he has told the diggers to they timber, up better for their own safety; he has kicked to the foreman about these same places. These conditions. continue until there is an accident. The fireboss reports, broken crossbars or bad roof on a roadway or some other danger to the foreman, but the foreman does not have it fixed, making, excuses, as he cannot put any one on that work today; or that it will stand until some idle day, and that is the way things go until the fireboss gets so he wonders what good he really is, is it any wonder it is hard to get good men to take this position of fireboss? The remainder of the shift the fireboss is used as a general roust-about, having to do such, work as building stoppings, help the timberman or track layers, pull rails out of danger in pillars, a trapper is off and he is told to trap that day, when the mine is idle he is laid off to cut expenses. That is the way the fireboss is treated. The fireboss is not merely a merely a necessity to be lightly regarded but a factor whose authority should be unquestioned. The fireboss has made his district and knows just what conditions the workings are in, and sees lots of dangers that the foreman does not. In the morn-

Jan 1, 1921

By Michael A. Berdine

Twentymile Coal Company?s first longwall face in the late 1980?s was oriented approximately 45 degrees to the major coal cleats and 45 degrees to the primary horizontal stresses. This combination of stress and coal cleating resulted in frequent violent bursts of coal along the longwall face. The bursts created particles of sufficient size and force with the potential of causing injury to employees and occasional damage to shield components. Partial web cutting was subsequently developed in an attempt to relieve the stress on the coal face and required the shearing machine to travel to the tailgate and back for a full 36 inch web. The partial web cutting pattern is focused on first cutting the lower 90% of the seam to relieve the stress as the shearer travels from the headgate to the tailgate. The web depth during the headgate to tailgate pass is typically in the range of 70% to 80% and varies with conditions to maximize production rates. The top and bottom of the seam in the remaining 20 to 30% of the web are then cut out to allow the shields and face conveyor to advance. 100% of the web is cut at each gate end for a distance of approximately 19 shields. This paper addresses some general mine geology and the procedures and benefits of partial web cutting with respect to safety, production and maintenance on a high production longwall face.

Jan 1, 2004

By Gilbert Davis

MR. DAVIS: When the Secretary asked me to continue our accident experience in safety work at Dawson to cover the year just closed, I rather felt that he was asking 'a good deal, for we had said about everything that we could last year. I am not going to say very much, but in line with his request I have merely brought the figures up to date. I want to say, to start, that 1934 was, rather disappointing. It was the poorest year since 1930, as you will notice (indicates on diagram). This first column represents the accidents per thousand shifts worked. We cannot assign any real valid reason for the increase. We think we worked just as hard, but we are rather inclined to lay it onto the times; in other words, to lay it to the unrest and the changing conditions that are existent not only in this country but probably all over the world. We had twelve lost time accidents last year. As I explained last year, a lost time accident with us is an accident wherein the injured man is not able to return to his regular work, the next day-the day following the injury. So this represents (indicating) the lost time accidents per thousand shifts worked. We had one fatality in the twelve accidents which is reflected in the severity rates, which are also based upon thousand shifts worked instead of per million hours. The reason we are on the thousand shifts worked is be¬cause the Copper Branches of the Phelps-Dodge Corporation are all kept that way, and we are on the same basis for easy comparison.

Jan 1, 1935

By Fredrick D. Palmer

U.S. ENERGY: PUTTING PEOPLE FIRST Assessing Goals, Needs and Resources ?Decision-makers must balance the needs of average Americans with the need for: ?A strong economy ?A clean environment ?A secure nation ?Events of recent years ?terrorist acts, multiple energy crises and a global focus on sustainable development ?magnify the need to balance these principles ?Coal ?domestic, abundant, affordable and increasingly clean ?meets these needs like no other energy source

Jan 1, 2003