Search Documents

By James J. Bryja

The production capabilities of today?s longwall systems have resulted in significant increases in retreat rates. This has in turn resulted in a heightened demand on panel development rates to assure that subsequent panels are completed in time to avoid a longwall production outage. As a means of reducing the pressure on the panel development activity a trend has developed towards the use of wider face lengths. The aim of using a wider face is to reduce the longwall retreat rate without sacrificing productivity and thereby reduce the pressure on increasing panel development rates. However, as the face width increases so too does the number of hydraulically powered roof supports that are required to control the longwall face roof. This increase in the number of units inherently translates into increases in the level of required maintenance relative to the multitude of mechanical and hydraulic components, and an increase in the time required for tear-down and installation time during the moves between panels. An obvious method of mitigating the maintenance and move-time impacts of wider faces is to employ the use of individual roof supports having a wider center-to-center spacing. This practice would serve to minimize the number of roof supports and maximize the time availability for longwall face production. With this target in mind a joint research project with DBT was initiated in 1998 to study the feasibility of using 2 m wide shields to replace the then standard 1.75 m wide shields. After four years of comprehensive work, the technical team from DBT and RAG American Coal completed the design and development of a prototype shield that would later become part of the world?s widest longwall face employing the use of shields having a spacing of +2 meters. The final spacing of the shields actually became 2.058m in order to match the standard pitch of the rack bar shearer haulage elements on the conveyor. In July 2002, the 2 m wide shields were successfully installed in LW-46 panel at RAG Cumberland mine in the U. S. The authors in this paper summarize the design considerations of and operational experiences with the world?s widest longwall face using +2 meter wide roof supports.

Jan 1, 2008

The morning session opened at 9:00 a.m. and was presided over by Carlyle F. Gronning, Chairman, Industrial Commission, State of Utah, Salt Lake City, Utah. The first speaker was John A. Fagnant, Vice President-Sales, Kemmerer Coal Company, Frontier, Wyoming. Subject - "Open Pit Coal Mining, Western States." Mr. Fagnant is a graduate of Colorado School of Mines, 1937 Degree, Metalurgical Engineer His career in the mineral industry began at the Arthur Mill of Kennecott Copper Company. For nine years he was with Allis Chalmer Company in Milwaukee, Wisconsin as a Sales Engineer in the Mining Machinery Division. Following five years in private business, he joined The Kemmerer Coal Company as a special projects engineer specializing in coal carbonization. He was assigned the job of Sales Manager in 1968 and promoted to Vice President of Sales in 1970. Member of A.I.M.M.E.

Jan 1, 1975

[ ]

Jan 1, 1996

By NA N/A

Jan 1, 1931

Jan 1, 1994

The final session on Wednesday morn¬ing was given over to a panel discussion of safety questions submitted by members of the institute. Mr. Murray presided, and Lyman Fearn, chief, Wyoming Dept. of Mines & Minerals, Rock Springs, Wyo., was moderator. Members of the panel were: John A. Garcia, chief mine inspector, New Mexico; Leonard Ford, mine foreman, Frederick- mine, CF&I, Valdez, Colo.; A. C. Moschetti, chief, coal mine inspection branch, USBM, Denver; Kirk V. Cammack, mining engineer, USGS, Denver; Joel N. Van Sant, chief engineer, St. Louis, Rocky Mountain & Pacific Coal Co., Raton, N. M.; Emery Olsen, safety engineer, coal mine and quarries, U. S. Steel Corp., Dragerton, Utah; F. J. Peternell, safety engineer, Union Pacific Coal Co., Rock Springs; and J. J. Reddy, mine inspector, Colorado Dept. of Mines, Grand Junction, Colo. On a question concerning the effect of roof-bolting on the maintenance of a breakline in pillar removal, Mr. Van Sant reported that some experience at his company's mines indicate that wood supports are not necessary to make the break although shooting is sometimes done to get it. Furthermore, bolting improves the roof in these pillar areas and extraction has increased about 20%. Mr. Fearn concurred in describing operations in parts of Wyoming.

Jan 1, 1953

The Tuesday morning session opened at 9:00 a.m. and was presided over by Mr. Homer Hyatt, Safety Director, North American Coal Corporation, Western Division, Castle Gate, Utah. Mr. Hyatt introduced Mr. Richard F. Walker, Vice President, Engineer & Planning, Electric Department, Public Service Company of Colorado, Denver, Colorado. Mr. Walker is a native of the State of Nebraska, a graduate of the University of Colorado with a BSEE degree in 1949. He has been associated with the Public Service Company of Colorado for almost twenty years and in the above capacity for the last one and one-half years. Mr. Walker?s subject was "Our New Plants and Coal. (See index for printed text of Mr. Walker's paper.) Mr. John F. O'Leary, Director, U.S. Bureau of Mines, Washington, D. C. spoke on the ?High Cost of Economy.? Mr. O'Leary graduated from George Washington University in 1950 with a degree in Economics. In 1950, he joined the Bureau of Mines. In 1963 he was appointed Deputy Assistant Secretary, Mineral Resources, U.S. Department of the Interior. In 1967, he was appointed Chief, Bureau of Natural Gas, Federal Power Commission. In 1968, appointed Director, U.S. Bureau of Mines, Washington, D.C.

Jan 1, 1969

By George A. Brown

Flexoid tubing for ventilation and some of the reasons for its use in re-opening old workings at the Union Pacific Coal Company's mines at Cumberland, Wyoming. , These mines are located on a branch line off the Oregon Short Line Railroad, about sixteen miles south of Kemmerer. The seam averages from 16 feet to 20 feet thick and is split about six feet from the bottom with from six inches to four inches of fire, clay; and is covered by a heavy sandstone roof about 45 feet thick and a fire clay floor about 15 feet thick. Pitch of seam 21 degrees. These mines were opened up with 5 openings on the pitch to the west, with main slope, north and south manways and north and south aircourses on 50-foot centers with parallel entries driven north and south at right angles to the slope and rooms turned on 50-foot centers up the pitch ; entries being 350 feet apart and chutes used in the rooms. Several years ago there was a heavy, squeeze came on these mines which necessitated shutting down all of No. I Mine below the third entry, the slope being down to 12 entry; also shutting the lower end of No. 2 Mine down from the twelfth entry to fifteenth entry and from the third entry down to the tenth entry, so as not to work too much territory at the one time. These mines are very gassy and were subject to heavy bumps during the squeeze ; also at the present time. In reopening these slopes, aircourses and entries for the recovery of the pillars, ventilation was quite a problem, as the squeeze had caused them to be practically tight; also the rooms for about 50 feet from the entry and the face of the rooms for about fifty feet. These rooms in the open space being either filled with Methane or depleted air. It was found in opening up these entries that in driving back entries parallel with the top entries for ventilation. which had to be skipped along the barrier pillar left from the face of the rooms of the entry below, that we had more bumps or bounces which made it a dangerous proposition to nine, as it will be noted as stated that the entries, room necks and face of rooms were more or less squeezed tight, showing that all the weight was centered on these points and the more they were disturbed the more it relieved the overlying pressure and something had to give; hence the bumps or bounces which have filled slopes, aircourses, entries and rooms with coal from the ribs and face, for hundreds of feet, throwing cars off the track, both loads and empties, and throwing track up to the roof and discharging timbers. We found it necessary to abandon driving back entries and have used Flexoid tubing with small blower fans to open up these slopes, aircourses and entries which has proved a success. We have carried air for distances that would have been impossible with brattice cloth or with

Jan 1, 1921

President Schloss called the third session of the fifty-eighth annual meeting of the Rocky Mountain Coal Mining Institute to order at 9:30 a.m. and introduced James Westfield, Assistant Director, Health and Safety, U. S. Bureau of Mines, Washington, D. C., who presided over the session. First speaker of the session was S. L. Jewell, Vice President, Peabody Coal Company, St. Louis, Missouri, who spoke on "Our Three Main Routes From Here." (Biographical sketch of Mr. Jewell, see index.) (For the printed text of Mr. Jewell's paper see index.) Mr. Westfield introduced Marling J. Ankeny, Director, U. S. Bureau of Mines, Washington, D. C., who served as moderator on the panel, "How Do We Go From Here in Safety?"

Jan 1, 1962

Jan 1, 1935

Jan 1, 1924

Jan 1, 1959

Jan 1, 1924

Jan 1, 1922

Jan 1, 1986

[JOHN B. MARKS President Boston Bldg., Denver, Colorado BENEDICT SHUBART Secretary-Treasurer 521 Boston Bldg., Denver, Colorado H. H. BUBB Vice-President for Colorado Cokedale, Colorado W. J. REID Vice-President for Utah Wattis, Utah WM. MOORHEAD Vice-President for New Mexico Dawson, N. M. GOMER REESE Vice-President for Wyoming Frontier, Wyoming EXECUTIVE BOARD COLORADO: E. H. McCLEARY Alamo SAMUEL TESCHER Denver UTAH: DAVE BROWN :Storrs JOHN JENNINGS Hiawatha NEW MEXICO: JAS. McDOUGALL Van Houten GEO. MIKSCH Gallup WYOMING: T. H. BUTLER Hanna L. A. NORMAN Sheridan]

Jan 1, 1925

T. W. BUTLER JAMES CAMERON WILLIAM MORGAN J. F. CALLBREATH FRANK C. MILLER J. T. RYAN BENEDICT SHUBART Fading away like the stars of the morning, Losing their light in the glorious sun: Thus would we pass from earth and its toiling, Only remembered by what we have done.

Jan 1, 1941

By Stanley C. Suboleski

Overview ? Ten minutes or ?the hook? ? Focus on Appalachia, productivity and production ? Message: ? Appalachian mining scene has fundamentally changed

Jan 1, 2007

Jan 1, 1923

This session was devoted to Surface Mining. Presiding was Virgil W. Carmichael, Vice President- Exploration, North American Coal Corporation, Bismarck, North Dakota, and John (Jack) F. Ratchye, Manager of Marketing and Resources, Peter Kiewit Sons' Co. Mining District, Sheridan, Wyoming. Subject-The new Federal Surface Mining Regulations-a thorough briefing as to content of law and how it will affect western mining. Introductory Speaker: William Hynan, Senior Vice President, National Coal Association, Washington, D.C. (See index for printed text of Mr. Hynan's paper.) Panel Members: The first speaker was George M. L. Robinson, Senior Hydrologist, Peabody Coal Company, Denver, Colorado. Mr. Robinson has a B.S. Degree from New Mexico University, Portales; Masters in Hydrology, Kent State, Ohio.

Jan 1, 1978