Search Documents

Many stress measuring instruments use overcoring stress-relief principles but adopt different sensing techniques. Every technique is subject to certain limitations of rock types and conditions. To investigate the performance and reliability of the instruments in field measurement, a simple and practical approach has been developed to allow comparable laboratory results to be obtained which simulate in-situ rock and stress conditions. Four commonly used devices, the USBM deformation gauge, the CSIRO HI cell,the CSIR triaxial cell and the UNSW SI cell were thoroughly tested in the laboratory. Some conclusions have been drawn as to their suitability and reliability in different field conditions. Recommendations are provided for the choice of an appropriate technique for a given rock type and condition. A new thin-wall cell that overcomes the disadvantages of earlier devices has been developed and tested. Its laboratory performance shows that it has good prospects.

Jan 1, 1990

Mineral resource estimation is commonly based on the accumulation of a series of local estimates. At times, the distribution of these grade estimates is not appropriate to the grade distribution of the data on which the estimates are based. Mineral resource grade estimation has an increased potential of being in error as the grade variability increases. As the mineral commodity value increases, greater grade variability within the mineral resource is tolerated. This paper directs its attention to mineral properties where the data average grade is 20 per cent or more than the data median grade at a specific cut-off grade. A mineral resource estimate is enhanced if it is supported by graphs which demonstrate that the sample data have been separated into appropriate geological domains. Each geological domain has a unique grade distribution signature, which can be graphically demonstrated simply and objectively. This signature will usually be evident well before the Indicated mineral resource estimates are available. The paper looks at the use of the log probability and MedAve plots to assess how effective domaining has been. It further outlines how the MedAve plot can be used to assess the integrity of the mineral resource grade estimate within a geological domain with the data on which it is based. The paper suggests that the overall grade of a mineral resource at any cut-off grade will be closer to the data median grade rather than the data average grade. Tips are provided to ensure that the odds reflected in the data grade distribution are not ignored and hence the risk that the project is affected by unrealistic estimates of the overall mineral resource grade is reduced.

Jan 1, 2003

Examples are given of the different management approaches used to improve a mine's profitability and the view is put that attention to mine design is very important but easily overlooked. The need for humans to use graphics to ccanprehend and develop strategies to exploit ore deposits is discussed. The use of two and three dimensional representations for geology, mine design and survey data is reviewed. The current use of computers in mining is discussed and reasons for the limited use of ccanputer graphis are proposed. Suggestions are made as to how more extensive use may be made of catputer graphics in mining by using recent and possibly forthcoming advances in computer hardware and by adopting certain software approaches.

Jan 1, 1983

The Beaconsfield Gold Mine within the township of Beaconsfield in northern Tasmania has been established in recent years to exploit a known resource in the Tasmania Reef which was mined to a depth of 450 m below surface between 1877 and 1914 yielding 850 000 ounces of gold. Activity at Beaconsfield over the past 30 years has involved drilling to assess the resource and rehabilitation of the top 100 m of the Hart Shaft that had collapsed since the original closure. More recently the mine has been dewatered to the 375 m Level and work is well advanced establishing infrastructure aimed at recommencing production during 1998 - 99. This paper reviews geotechnical studies undertaken to-date and provides a brief overview of some practical methods of analysing ground conditions. It pursues simple observation and analysis as a tool for assessing mine design and ground support options without recourse to extensive monitoring and measurement and avoids the use of elaborate models before the basics are understood.

Jan 1, 1997

The evolution of mineral sand mine rehab ilitation techniques have been techniqually based. Research and investigations have been carried out by government authorities, mining companies and academic institutions. Protection of the physical and biological environments is a vital part of any mine oper- ation. The Mineral Sands Mining Industry in New South Wales is successfully working within the State's environmental framework and is meeting; community requirements and expectations concerned with the environment and mine rehab- ilitation. Keywords: Environment, mineral sands mining, mine rehabilitation, revegetation.

Jan 1, 1986

By Collins BJ

Basic principles of stack injection are outlined and supported by calculations of thermal, chemical and aerodynamic requirements of an ideal 4000 tpd furnace. Calculated results show that these requirements vary with conversion of FeO, and that best performance may be expected with XFeO = 1.0 for which calculated production is 6919 tpd and coke rate is only 211 kg/thm. Calculations are also presented for a cycled injection. Discussions show that stack injection is a good way of overcoming softening problems and meeting the demand for iron in a fluctuating demand situation when it exceeds the maximum capacity of a furnace.

Jan 1, 1975

The State of Western Australia has a land area of 2 525 000 km2, and is well endowed with minerals and petroleum products. In 1989 - 90 these products were valued at nearly A$10 500 million.

Jan 1, 1992

A number of suggestions have been made to improve the design of cells used for electro winning and electro refining of metals. Most of these designs have been aimed at increasing the current density used in order to improve cell capacity, although the purpose of some has been to produce electro deposited metals in a continuous manner. Improvements in the electrolyte flow pattern in conventional cells have resulted in an increase in the rate of mass transport of metal ions to the electrode surface; giving rise to lower concentrat- ion polarization and an improvement in the nature of the product obtained, Other cell designs are based on a moving electrode, usually a rotating disk, and these may include provision for removal of the product in a continuous manner, The maximum current density which can be used in an electro- lytic deposition process is determined by the limiting diffusion current, the physical nature of the, product, the purity of the product required and by the increase in power costs which result from the higher cell voltages, This paper examines the properties of an agitated bed of particles as an electrode system when used for a metal deposition Process,

Jan 1, 1969

This paper describes the new legislative regime that will apply to the regulation of the minerals industry in New Zealand.The reform of New Zealands minerals legislation was initiated in January 1988 when the Minister for the Environment, Rt Hon Geoffrey Palmer, announced the Governments intention to review all the major laws governing New Zealands resources. The Resource Management Bill is scheduled for to the House in December 1989 and its date of enactment is scheduled for June 1990.With some matters still to be determined (at the time of writing), this paper cannot be a definitive review and description of the new legislation, it is instead an attempt to outline the major features of the Bill, to date, that are seen as important to the mining industry.

Jan 1, 1990

The paper reviews recent valuations of mineral properties, many of which are at an early stage of exploration. The various methods used are outlined. The problem of comparing, in terms of whether it is fair and reasonable, a highly subjective opinion of the present value of a portfolio of exploration tenements with a vendor consideration, the real value of which, in most cases, lies at some indeterminate time in the future because of the application by the Australian Stock Exchange (ASX) of escrow conditions, is highlighted. Examples are given of some of the questionable logic used by consultants in handling this difficult issue. A proposal for revision to current flotation and listing practice which, the author believes, would circumvent the problem and at the same time provide better protection for the investing public is offered for Consideration.

Jan 1, 1994

Stereological transformation relies on knowledge of the textural characteristic that governs the relationship between the one-, two- and three-dimensional liberation spectrum. Transformation functions can be built from fractionation of real mineralogical particles. Alternatively, transformation functions can be built from simulated textures, geometrical textures or artificial textures. These transformation functions can be useful when the texture of an ore has not yet been characterised for the preliminary assessment of liberation. Recently, Lin et al (1995) developed a methodology for generating such an artificial texture. The artificial texture can be used to produce broken particles of known volumetric composition. Data from image analysis on several artificially generated samples is readily available, and can be used to build the associated stereological transformation function. In this work, the methodology for calculating the transformation function from LinÆs artificial texture is presented. The new texture is implemented for stereological transformation applications.

Jan 1, 2008

By Ross T. J

Renison Limited operates an underground tin mine employing both cut and fill and open stope methods, at Renison Bell on the west coast of Tasmania. Mining in the region commenced in the 1890's. Development of the current mining operation commenced in 1965. The ventilation system used at Renison in its present configuration is a function of current mining methods, orebody characteristics and prevailing Tasmanian Department of Mines Inspection Regulations.

Jan 1, 1988

By W J. Bruckard

In Australia, ilmenite is produced from beach sand deposits. These deposits contain varying quantities of the valuable minerals zircon, rutile and ilmenite, along with a variety of other minerals. The valuable minerals are upgraded using combinations of gravity, magnetic and electrostatic processing techniques to yield high-grade products. One of the penalty elements present in ilmenite concentrates is chromium, present mostly as chrome spinels. This mineral is particularly difficult to separate from ilmenite, as the properties of the two minerals are very similar in relation to the traditional separation processes. While the deposits which have been treated in Australia in the past have had only low levels of chromium present, many of the newer deposits contain much higher levels of contamination and, thus, there is an increasing need to develop robust processes to separate chrome spinel from the ilmenite. Flotation, which is a unit process with the potential to solve this problem, has surprisingly received little attention for this application. The literature suggests the research effort to characterise the general flotation properties of chromite (chrome spinel with high chromium content) has been extensive and a substantial amount of data is available. However, the problem of separating a small amount of chrome spinel from a large amount of ilmenite requires a different approach to that from separating chromite from siliceous gangue, which has been the main commercial focus of chromite flotation in the past. Much of the work done has been fundamental in nature and the results obtained are fairly inconsistent, as is the testwork completed at batch and pilot plant scale. While these inconsistencies have been attributed to the variable composition of the mineral, there is little evidence supporting this premise. Just as chrome spinel and ilmenite have similar physical characteristics, the flotation response of both minerals is also similar. This paper reviews the literature relating to the flotation of chrome spinel and presents a considered approach to the development of a robust flotation method to separate chrome spinel from ilmenite.

Jan 1, 2001

By R D. Morrison

This paper reviews the need for, and potential of, dry technologies in mineral processing, and considers the problems that will have to be solved for such technologies to be economic. The need for water in conventional mineral processing is reviewed, together with the advantages and disadvantages of operating wet and dry. A wide range of dry processing techniques have been developed in the past, some of which are in routine use either in mineral processing or in allied industries. However more information is needed to determine which of these is appropriate to replace conventional wet processing. It is concluded that a new paradigm is required for the design of processing flow sheets, which will need to extend to innovative ways of valuing particular process routes. Research is also required to develop current dry methods to increase throughput and overcome other disadvantages, and to develop new or refined dry separation methods, perhaps exploiting alternative mineral properties.

Jan 1, 2003

By Y Zhang

Being analysed systematically, the factors influencing the production of fully-mechanised coal face have been divided into geological, mining technical, and management groups. Artificial neural network-expert systems (ANN-ES) are established to decide the influencing factorsÆ membership grade; genetic algorithm-artificial neural network (GA-ANN) are used to decide the weights; fuzzy comprehensive evaluation method is used to calculate the integration indexes. Finally, the GA-ANN model is established to forecast the production of fullymechanised coal face. It is proved that the model is reliable with higher precision. The production of fully-mechanised coal face is influenced by many factors. However, some influencing factors are neglected by the traditional forecasting methods, the results of which are not precise and hardly be used as a guide for mine production and management. The relation between the production of fully-mechanised coal face and its effecting factors is analysed, and the meta-synthetic AI approaches are used to forecast the production of fully-mechanised coal face.

Jan 1, 2003

The development of paraprofessional courses in metallurgy and related disciplines, by the Department of Technical and Further Education in New South Wales, is outlined in this paper. The changing nature of metall- urgical educational requirements is summarised, and various attendance patterns discussed. The potential advantages of the sandwich system of College attendance, to the more distant sectors of the mineral processing and metallurgical industry is outlined. Some of the likely future trends in technician education are presented. These include the need to respond to the changing expectations of technician employers, as shown by industrial surveys, the role of experiential learning, the need to integrate courses so that students can build on prev- iously completed courses, the possibility that future technicians will require a multi- disciplinary background and the provision of easier access to technical college facilities by potential students and industries.

Jan 1, 1978

Lithocaps are potentially voluminous zones of advanced argillic and associated argillic alteration located above the subvolcanic intrusive environment. They constitute exploration objectives for epithermal and porphyry-type deposits. High-sulphidation epithermal deposits may be sought within lithocaps, whereas low-sulphidation deposits may exist on their edges. Porphyry Cu-Au/Au deposits may be accessible beneath lithocaps if systems are telescoped sufficiently. Oxidation of the basal, pyritic parts of lithocaps may promote supergene sulphide enrichment under appropriate tectonic and climatic conditions.

Jan 1, 1995

The use of ammonium nitrate/fuel oil explosives is.now well established in most open cut mining operations. Its use. is extending to underground mining. This has been due in a large measure to improvements in the nature of the ammonium nitrate made available from various sources. The addition of surface active agents and water in controlled amounts to the fuel oil has been found to increase the sensitivity of the ANJFO mixture with consequent better explosive properties. It is considered that the surface active agent increases the bond between the ammonium nitrate and fuel oil giving a more, intimate physical and chemical mixing of the oxidising and reducing agent. This results in increased sensitivity and a faster rate of reaction. The increase in sensitivity has been accomplished without any diminution of safety. Tests which demonstrate the safety of this type of explosive are given in the appenuix.

Jan 1, 1964

Mount Gibson Iron Limited (æMount Gibson IronÆ) has made the difficult transition from a privately owned company with an iron resource to a publicly listed company owning and operating a profitable iron ore mine in the mid-west of Western Australia. The development of the company is described with particular emphasis on the Tallering Peak operations, resources, associated infrastructure and logistical arrangements; the Mt Gibson hematite and magnetite resources and the proposals to develop the magnetite resource as part of an integrated project through to iron pellet production. The concept of tailoring the relatively small ship capacity of the outturn port of Geraldton to appropriately sized inturn ports in China to allow direct delivery of product is discussed. The companyÆs philosophy of building shareholder value by progressive development of its relatively modest resources (compared with the Pilbara) is discussed. In pursuit of long-term business success Mount Gibson Iron has formed symbiotic relationships with strong business partners whose aims and objectives mirror or complement those of Mount Gibson Iron.

Jan 1, 2005

Economic and environmental pressures are shifting the world balance of titanium dioxide production away from sulphate based. manufacture towards the more cost effective and cleaner chloride route. In the chloride process for titanium dioxide pigment manufacture, TiOz and other metal oxides in the feed ore are reacted at high temperature with chlorine in the presence of carbon. These gases are cooled after they leave the reaction zone, upon which solid contaminants precipitate and are substantially removed. The liquid titanium tetrachloride is purified by distillation before again being vaporised and interacting with hot oxygen to form pigmentary titanium dioxide and regenerate chlorine for recycle. The base pigment is wet milled, surface treated (by coating with hydrous oxides of silica, alumina and others) and redispersed before packaging. Optical properties of TiO2 pigments are reviewed and the role of refractive index and particle size explained in brief. Pigment related factors affecting the opacity, colour, undertone, gloss and durability of coatings are examined with respect to manufacturing requirements. The superior performance of chloride based pigments is briefly reviewed.

Jan 1, 1991