Search Documents

Haematite Recovery from a Tailings Stream Laboratory and pilot scale testing were carried out in 1999 on a tailing sample from a North American iron ore plant using gravity, magnetic and flotation techniques. The ore contained 16 per cent iron mainly in the fine (-38 ¦m) size fraction. Two methods of evaluating the separation efficiency were used; Selectivity Index and Z factor analysis. Tabling and magnetic separation produced poor results, with flotation testing showing some promise, generating concentrates assaying more than 40 per cent Fe. High grade concentrates containing more than 67 per cent Fe were generated using the Kelsey Centrifugal Jig, and it was recommended that this technique be pursued at a larger scale to verify the results obtained.

Sep 13, 2010

The rare earths market is relatively small and slow growing. Three applications using mainly cerics rare earths : catalysts, glass-ceramics and metallurgy are volume market. Inside this slow moving frame, fast growing niches can be found lamp phosphors, permanent magnets, fine cera- mics... There is no specific ore for one given element, and the natural occurence of any ele- ment is almost constant in both monazite and basnaesite. This creates the "balance problem" that consists in the best compromise between shortage and over production. The general trend of prices is downward in constant money. Despite this difficult environment (price decrease, technology changes, etc...) lots of company have always been attrac- ted by the rare earth business.

Jan 1, 1986

The impact of computers on the mining industry has increased for the past twenty years in most parts of the world. The application of computers in the mining industry has been demonstrated in areas such as geological data analysis, ore reserve estimation, mine planning, and manpower training. There is also a general concern in this country regarding the computing background of graduating mining engineers from the Australian higher institutions of learning. This paper describes specific steps which have been taken at the Department of Civil and Mining Engineering, The University of Wollongong to provide adequate computing background to mining engineering graduates. Specific topics discussed include hardware and software available to students and how "computers" have been integrated into the mining engineering course.

Jan 1, 1986

There has been considerable attention in the literature to coarse sizing by wet and dry screening, but these methods have not proven to be applicable to the calculation of screen capacities for fine wet sizing, desliming and media recovery: A method is presented for the calculation of the size of screens for such duties, being based on the mean particle size of the oversize material on the screen which reflects the surface area from which the fines or media must be removed. Similarly for dewatering, it is the area from which the water must be drained. Desliming, media recovery and dewatering are each considered along with water require- ments both with the feed and as wash water.

Jan 1, 1984

By Miskelly N

The Joint Committee of The Australasian Institute of Mining and Metallurgy (AusIMM) and the Australian Mining Industry Council (AMIC) have published a Code for the Reporting of Identified Mineral Resources and Ore Reserves. The Code is the result of an initiative begunin 1971 to achieve industry self regulation of Resources and Ore Reserves reporting which resulted first in guidelines for reporting standards but which have now been incorporated in ASX Listing Rules as a Code withsignificant sanctions ensuring compliance. This paper describes the background to the Code, its key provisions, and comments on practical aspects of1 working with the Code and compliance issues.

Jan 1, 1990

By Chen B

In recent years great efforts have been made in the optimisation of ball mill operation. This paper describes a methodology developed for modelling and optimising the steady-state grinding process. Thirteen basic similarity numbers of the process are derived. Based on these similarity numbers, we build a group of mathematical models which give a full description of the relation between dependent and independent variables. The parameter estimation and multi-objective optimisation of the grinding process have been done using these models, and validated with experiments in a continuous laboratory-scale ball mill.

Jan 1, 1993

This session comprises six papers: One paper is specifically on advances in drilling techniques, a paper presents a classification for water inrush rich with corresponding guidelines for protection, two papers are concerned with mining impacts in integrated catchment management - one from the quality viewpoint and the other from the quality viewpoint, and the final two papers are case studies of mine dewatering - one for an underground mine threatened by a karst limestone aquifer and the other of an open-cut mine threatened by interbedded sand aquifers. The paper entitled, Practical mine dewatering by means of surface drilled wells by Sides is innovative in presenting the case for wells as cost effective and appropriate for a number of purposes including exploration, re-opening old mines, dewatering, grout emplacement and monitoring.

Jan 1, 1988

By H El-Shall, R Stana a

An innovative process for the separation of carbonaceous minerals from bulk ores is presented. In this process, the surface of carbonate minerals is reacted with acid used to nucleate CO2 bubbles at the particle solution interface. Entraining the liberated CO2 gas at the surface via coating agent renders the particle more buoyant providing for a selective separation from non-carbonate containing masses. Different surfactants were tested to stabilise the bubbles and float the particles. In this paper, separation of dolomite from apatite using PVA (polyvinyl alcohol) as a coating agent, is discussed. Interestingly, up to 10 mm particle sizes can be floated. Moreover, flotation of a phosphate and dolomite mixture was carried out and MgO content

Jan 1, 2005

The accurate estimation of ore reserves is the most crucial element in a financier's assessment of the risks associated with funding a mining project. It is crucial because any deficiencies in the estimation of a company's ore reserves will be later reflected in the cash flows derived from the production and sale of the commodity. Bankers must rely on the advice of members of your institute in assessing the quality and quantity of reserves. This information helps determine the cash flows which bankers use in their credit making decisions. It is against this background that this exposition has been prepared on "what bankers require in ore reserve statements" or put another way, "what does a bank require in ore reserve statements in order for it to provide the necessary credit Approvals".

Jan 1, 1987

By West R

Since its introduction in 1989, the Australasian Joint Ore Reserves Code (the JORC Code or the Code) has been one of the success stories of the informational interface between the mining industry and investors. This is due variously to the user-friendly nature of the Code itself, to its practical approach to this complex subject, and to the way in which its requirements have been implemented in practice. Recognition of its utility and effectiveness has influenced a significant number of mining countries to re-assess their reporting standards with the positive outcome being that for the first time, a set of standard international definitions for reporting of mineral resources and reserves is a realistic possibility.

Jan 1, 1996

The discovery of magmatic nickel sulfide mineralisation within the Musgrave Block of Central Australia, in a region which has received virtually no exploration since the early 1970s, promoted a pegging rush throughout the region and provided a significant boost to the investor interest in resources sector companies. The discovery proved a significant success for the application of generic models for major magmatic nickel-copper sulfide deposits. The entry of junior explorers to the region is the principal mechanism by which the region will be explored, although significant social and physical challenges will impact on the ability of explorers to maintain investor confidence in the region.

Jan 1, 2002

In conjunction with a study on wear of drag bits the effect of clearance angle on penetration rate was studied.Increases in clearance angle from 24 1/2 up to 30° gave an increase in penetration rate. Thereafter the rate was apparently affected by partial clogging with cuttings.Analysis of results was by a linear regression model and the t-test was applied to assess the significance of parameters in the penetration equation.

Jan 1, 1969

The New Zealand experience has shown that the trend in technologi- cal change in gold extraction can be characterised by a systems approach which grows progressively broader with advances in understanding and allowing for an increasing number of factors. The Australian experience has demonstrated that the elements of developing an exportable process include allowing projects to prolifer- ate where substantial entrepreneural involvement is likely to occur. In both countries useful technological breakthroughs were invariably discarded when first tried at operations not well established and under great pressure of achieving and maintaining production. It required the efforts of persistent individuals at operations which had become bedded in and profitable, to follow the initial work up and commercialise it.

Jan 1, 1988

Mineral sands are being used as the source material for new "high-tech" engineering materials. One such material, Magnesia Partially Stabilized Zirconia (PSZ) has been developed and patented world-wide by CSIRO. Derived from zircon sands, the material is currently produced by Nilcra Ceramics in Australia and is exported world-wide.The properties of the material are contrary to those generally accepted for ceramics and are far more akin to those of steel. The material resists not only abrasive wear, impact and thermal shock, but does so under corrosive conditions that frequently cause early failure of metal and cemented carbide.While the consumption of mineral sands for the production of PSZ is not going to significantly increase the demand in the short term, the material itself may well assist the productivity and processing problems within the industry.

Jan 1, 1986

In a stipulated hard rock situation, drilling and blasting costs per tonne in open cutting or underground operations are comparable. In open cuts the drilling and blasting costs per tonne of ore are multiplied by the waste ratio.Conventional underground loading and haulage practices are so batch-oriented that the cost per tonne of ore handled is a large integral multiplier of open out costs per tonne loaded and hauled.If underground costs are to be reduced to compare favourably with open out costs then loading and hauling practices underground must be converted to a non-batch continuous system. This can be achieved by utilising gravity to control ore to mobile crushers feeding conveyors running direct to surface.

Jan 1, 1985

Interrelated data for five fundamental features of production processes would help promote the- development of the discipline and profession of extractive metallurgy. The features are the input materials, the products, equilibria, kinetics" and movement of materials within the reactor. Aspects of overall process performance that could be developed in these terms include quantitative comparison of reactor engineering options, process dynamics, interruptions to operations, and recycling. The ability to be able to forecast these and other aspects of process performance would be valued by most metallurgists. Although data have been reported for each of these aspects they have been more relevant to process economics than process fundamentals. The data have not often been interrelated via the fundamental features for a particular raw material-process system; nor have ~ similar data been related for different systems.

Jan 1, 1986

The Broken Hill orebodies have 'traditionally been mined by cut and fill trethods. In the mid-1950's New Broken Hill Consolidated Limited experimented with sublevel longhole open stoping but did not pursue the method due to inefficient loading and poor fragmentation. The introduction of longhole open stoping in 1968 was a radical change and was necessary to enable the profitable extraction of lower grade orebodies and this method is now used for 55% of the production from The Zinc Corporation, Limited and New Broken Hill Consolidated Limited mines.

Jan 1, 1982

By R A. Bearman

Recent demand pressures for iron ore should not distract from the longer term view that intense competition in the industry has demanded technological innovation of a high order. There is a long track record of successful innovation underpinned by a solid base of scientific research and knowledge. By comment on recent developments in trucks, comminution and direct smelting, this paper suggests that innovation is still a key attribute of the industry. The spending of the minerals industry on underlying science, however, is not particularly high. By looking at other industries we can ascertain that for step change technologies, it is particularly advantageous to have a solid base of science and technology underpinning developments.

Jan 1, 2005

Perseverance Mine is a part of Leinster Nickel Operation (LNO), a fully owned division of Western Mining Corporation (WMC). The town of Leinster is located 370 kilometres north west of Kalgoorlie. LNO operates an underground gold mine and mill at Agnew, 30 kilometres west of the town in addition to two nickel mines and a mill 15 kilometres east of Leinster. Both the Perseverance and Rocky's Reward nickel orebodies are mined by open pit and underground methods.The Perseverance orebody was discovered in the early-1970s. Decline development commenced in 1977 and the first ore was milled in 1978. The shaft sink started in 1979. The shaft was comissioned in 1983, four years after sinking commenced. The mine was placed on care and maintenance in 1986 and purchased in January 1989 by WMC.

Jan 1, 1992

By V S. Svinin, V V. Rybin, V A. Maltsev

In large-scale mining, large-sized intermediate pillars, or block-pillars, are generated on the horizon or between closely located mines. These pillars are mined under high rock pressure that results from the stress concentration zones superposition from closely located working excavations. This problem becomes much more complicated if high tectonic stresses occur in the rock mass inducing a rock-burst risk situation. Mining experience gained in mining seven block-pillars at three Khibiny mines in Russia under the geomechanical situation like that described aboveÆ is discussed in detail. It has been shown how safe mine of block-pillars depends on their width, location relative to significant geological failures and uncaved rocks of the hanging wall, the order of pillar recovery, and application of special measures for rock mass stress relieving. Basing on the analysis of the mining experience and special scientific researches, the basic principles are worked-out for safe block-pillar mining under rock-burst prone conditions.

Jan 1, 2000