Search Documents

The 1932 meeting will be held June 8, 9 and 10 in the western section, place to be announced later. If you have any suggestions for the place or program; send them to the Secretary at once.

Jan 1, 1931

The third session of the Rocky Mountain Coal Mining Institute was called to order by Edward G. Fox, President of the Bitumious Coal Operators' Association, Washington, D. C., at 9:M A.M. He stated he had enjoyed being present at the Institute the past two years, and was honored to be asked to preside at this morning's session. Mr. Fox introduced Cloyd M. "DOC" Smith, Vice President of World Mining Consultants, Inc., Washington, D. C., whose talk, "World Trade in Coal" was illustrated with a number of graphs. (See Index.) M. E. "Shorty" Wade, Assistant Purchasing Agent, Kaiser Steel Corporation, Fontana, California, was introduced and gave a paper on "What Is Required to Realize Profits Through Purchasing." (See Index.) Mr. Fox suggested that all members take an active part in their association. He stated that much more can be done in association work than as a lone wolf. He urged all to support their organization and stay with it. It is for each member's good and not for the good of a few. Carl G. Schilbe, District Manager, Jeffrey Manufacturing Company, Columbus, Ohio, was introduced, and he presented a paper on "Results of a Study in Belt Idler Design -The Perma-Seal Idler." This paper was illustrated with a number of slides. (See Index.) "Operation of A-C Mines," was the topic covered by W. C. Painter, Service Engineer, Joy Manufacturing Company, Price, Utah. (See Index.) Each of the papers was well received, and presented a number of things valuable to all who heard them. Mr. Fox then turned the meeting back to President von Storch who read several announcements of committee meetings, and the meeting was adjourned at 11:30 A.M. for an afternoon of recreation before the banquet and dance that evening.

Jan 1, 1958

James Westfield, Assistant Director, United States Bureau of Mines, Washing- ton, D. C., called the second morning session of the Rocky Mountain Coal Mining Institute to order, and promptly introduced John Peperakis, Manager of the Sunnyside Operations, Kaiser Steel Corporation. Sunnyside, Utah, who spoke on "Ground Control Developments, Sunnyside Mines, Kaiser Steel Corporation." Mr. Peperakis illustrated his talk with a number of slides which were not reproduced with the printed text. (For the printed text of Mr. Peperakis' paper see index.) James J. Diamanti, President of the Car- bon Fuel Company, Helper, Utah, was introduced by Mr. Westfield, and he spoke on "Small Mine Operators Help Themselves." Questions from the floor followed Mr. Diamanti's talk.

Jan 1, 1961

Winter Meeting Cosmopolitan Hotel DENVER, COLORADO February 27,28 and 29,1928 Business Meeting 10:OO a. m., February 27th Banquet 6:30 p. m., February 27th Dancing 9 :30 to 1 :00 a. m., February 27th Theatre Party, February 28th Special efforts will be made to care for lady guests

Jan 1, 1927

Jan 1, 1927

[ADAMS, JOHN P. 0. Box 560-No. 6, Rock Springs, Wyo. ADDISON, HERBERT Big Horn Collieries Co., Colo. Bldg., Denver, Colo. ALEXANDER, JOHN 825 South Gaylord St., Denver, Colo. ALLAN, DAVID Gorham, Colo. ALLEY, GERALD 1340 Steele St., Denver, Colo. AMBLER. J. B c-o Ambler & Riter. Kearns Blde.. Salt Lake Citv. Utah ANDERSON, A. E. Midland Savings Bldg., Denver, Colo. ANDERSON, ARTHUR E...Colo. Utilities Corp., 730 Equitable Bldg., Denver, Colo. ANDERSON. FRANK Crosb Wyo. APPERSON, A. B Tramway Bldg., Denver, Colo. ARNOLD, G. O .Oak Creek, Colo.]

Jan 1, 1930

Jan 1, 1974

Jan 1, 2005

Jan 1, 1926

PRESIDENT LITTLEJOHN: Until Mr. Wood comes back, we have a gentleman with us who has been sitting in one of the back seats. He has never gotten up and showed himself, and I think we ought to call on Mr. Ryan to stand up and say two words, or a half dozen words. Mr. Ryan! (Applause.)

Jan 1, 1925

PRESIDENT LITTLEJOHN: The paper of Mr. Emrick will now be open for discussion for about twenty minutes. The meeting is now open for discussion. MR. EMRICK: There is some question that may have occurred to you at different times, that is how are you going to tell when the bits are properly made? A fairly good rule to go by is when the used bits come out of the mine, if half of them are bent and half of them are broken, the average is pretty good MR. GEO. B. PRYDE (Union Pacific Coal Company): I would like to ask Mr. Emrick if he has any figures as to the saving of Dower with the different styles of its. MR. EMRICK: I suppose you mean chisel point bits and pick point bits? MR. PRYDE: Yes. MR. EMRICK: So far as I have been able to learn, the only reason why chisel point bits are used is to prevent coring that might be done by the cutter chain. The pick point bit, of course, is the proper thing to use. It can be used when the position of the cutter links in the cutter chain is right. I do not know of any figures which give power consumption ratings on the use of pick point and chisel point bits, but there are tests and ratings, etc., which have been taken- which have been tested as against different bits, which have been given proper clearances against bits not having been given proper clearances, and they will run,-in their saving in power, they will run 20 to 25 per cent. MR. A. C. WATTS (Chief Engineer, Utah Fuel Company) : I would like to ask Mr. Emrick if he has any record showing the saving in power on using the alloy steel chisel bits. I know that several experiments have been made; I do not recall the figures now, but we had a very decided saving in power. MR. EMRICK: I haven't any of the records. Do you think that is because of the steel that has been used? MR. WATTS: Well, they were all sharpened by the same man and used in the same machine, and at the same shop. I do not know the composition. It is "Red Star" Vanadium that I had in mind. MR. EMRICK: I have not seen any records. Some companies are using the tool steel bits because they stand up a little bit better. MR. BENEDICT SHUBART (Secretary) : I was going to ask Mr. Emrick about that question. There is one company that does not recommend tempering the bits. They recommend using not exactly self-hardening steel, but one that is bard enough without quenching-they use 80-90-point car- bon but about a 70-point manganese, not exactly self-hardening steel, but they do not temper this at all. Will Mr. Emrick state if a steel of that kind could be worked in the bit sharpening machine that his company makes, as it

Jan 1, 1925

Jan 1, 1921

Jan 1, 1986

The next meeting of the Institute will probably be in May, 1930. At the almost unanimous vote of the membership, there will be only one meeting a year, and that will be in May or June.

Jan 1, 1929

The Role of Partnerships ?Industry history ?Companies were their own kingdoms ?MSHA and NIOSH were out of touch and focused on enforcement with no direction ?Labor and management were constantly at odds with each other

Jan 1, 2002

Jan 1, 1987

Jan 1, 1923

Jan 1, 1951

Jan 1, 1985

Jan 1, 1982