Search Documents

[ ]

Jan 1, 1990

By Bob Burnham

Agenda 1 Overview of forecasting process 2 Review of Pre and Post Recession Forecasts 3 US Demand/Supply Summary 4 Coal Demand by Region 5 Coal Distribution by Census Region 6 Coal Price Outlook 7 Carbon Cases 8 Takeaways

Jan 1, 2009

The opening session of the Forty-seventh Meeting of the Rocky Mountain Coal Mining Institute was called to order at 10:00 o'clock a.m., Thursday, June 7, 1951, in the junior Ballroom of the Hotel Utah, Salt Lake City, Utah, with President Arthur B. Foulger presiding. PRESIDENT FOULGER: We are a little bit late getting started, gentlemen. We have a few more members out there to register and we will wait just a few minutes until they are finished and then we will begin. The Honorable Earl J. Glade won't be here until 2:00 o'clock this afternoon. I understand lie was unavoidably detained so we are going to go down this program pretty rapidly when we get started, but we want to wait until those gentlemen still unregistered come in. Gentlemen, we will try and start now. Mr. Whiteside suggests that the minutes for last year probably should be read. However, they were published in the proceedings for last year, so I presume it will be just as well to dispense with the minutes and get going here before we lose too much time.

Jan 1, 1951

Profiled below are the eight RMCMI 1999 Scholarship Award winners. Seven of the eight attended the 95th Regular Meeting and convention at Crested Butte, Colorado in late June. Each spoke during the Scholarship Awards Monday luncheon and shared their goals with attendees. In addition to receiving a $1,500 tuition credit, thanks to the Patrons of the Institute annual funding of scholarships, each received recognition at the luncheon with a brass plaque signifying this honor. The winners are guests of the Institute Sunday through Tuesday and have an incredible opportunity to meet many in the coal industry who could be potential employers. The state vice presidents host the winners and pay for their travel and hotel expenses. This is a continuing scholarship and may be renewed for tuition credit again in the senior year if they remain a full time student and if recommended by the dean of their college or university. A resident from each of the eight member RMCMI states is selected by the Scholarship committee from Board approved institutions. Criteria for these annual awards is that the recipient (1) is a full time sophomore student who will use the tuition credit the junior year. (2) Be both a U. S. citizen and a legal resident of the member stare. (3) Maintain good academic standing, be pursuing a degree in a mining related field and have an expressed interest in western coal as a possible career path. Contributions to this worthwhile project are tax deductible to each individual RMCMI member or his company. Through donations of $100 or more to the Patrons of the Institute, each Patron receives a plaque and a year bar for each additional year contributions are made. These may be directed to RMCMI Patrons, 3000 Youngfield Street, #324, Lakewood, CO 80215-6553. [ ] ARIZONA WINNER Jennifer Jannusch University of Arizona Jennifer is the daughter of Peggy and Larry Jannusch of Phoenix. She graduated from Shadow Mountain High School in the top 15% of her class. She has been on the Dean's List and won the National Collegiate Engineering Award. Jennifer belongs to the Association of Engineering Geologists, SME, Best Buddies, and enjoys running, painting and languages. [ ] COLORADO WINNER Alan S. Maste¬rs Colorado School of ties Alan is the son of Lee and Ellen Masters of Lakewood, Colorado. He graduated from Lakewood High School and has been on the Dean's List at CSM. He resides with his wife, Karen, and children Morgan, Nicole and Scott. Spending twelve years as a mechanic and semi-truck driver, Alan decided to return to school to pursue an engineering degree. Having maintained a 4.0 G.P.A. at Arapahoe Community College, he was accepted at CSM where he continues to excel. He firmly believes that the future of our country will be enhanced by our ability to utilize our natural resources. Alan enjoys time with his family, fishing, water skiing, bowling and reading Tom Clancy or John Grisham novels.

Jan 1, 1999

FEBRUARY 20TH. MORNING SESSION: The fourteenth regular meeting of the Rocky Mountain Coal Mining Institute was called to order in the Magnolia Room of the Albany Hotel. Monday, February 20th at 11 o'clock A. M., with the President, Mr. R. M. Magraw, in the chair, sixty-two members being present. The first number upon the program was the reading of the minutes of the previous meeting by the Secretary. There being no corrections or alterations, the minutes were approved as read. As Mr. Dan Harrington was unavoidably absent, his paper, subject: "Coal Mine Accidents and State Mining Law" was, by request of the President, read by Mr. J. Q. Lalor. Following this was a short discussion. There being no further business the meeting adjourned. AFTERNOON SESSION: The meeting was called to order in the Magnolia Room of the Albany Hotel at two-thirty o'clock P. M. with President R. M. Magraw presiding, fifty-eight members being present. Mr. Ben Shubart and Prof. J. C. Roberts were appointed a committee to draft and telegraph a message of condolence to Mr. E. S. Brooks of Rock Springs, Wyoming, on account of the recent death of his daughter. The com¬mittee submitted a copy of the following telegram, which was read by the Secretary: "E. S. Brooks, Rock Springs, Wyoming. We extend to you and your family our sincerest sympathies in your deep affliction. (Signed) THE ROCKY MOUNTAIN COAL MINING INSTITUTE." The following resolution was next presented by the Secretary and upon motion, duly seconded was carried by a unanimous vote: WHEREAS, it has come to the knowledge of this Institute that the Coal Mining Course of the Colorado School of Mines has been abolished; and

Jan 1, 1922

[JOHN B. MARKS President Boston Bldg., Denver, Colorado BENEDICT SHUBART Secretary-Treasurer 521 Boston Bldg., Denver, Colorado H. H. BUBB Vice-President for Colorado Cokedale, Colorado W. J. REID Vice-President for Utah Wattis, Utah WM. MOORHEAD Vice-President for New Mexico Dawson, N. M. GOMER REESE Vice-President for Wyoming Frontier, Wyoming EXECUTIVE BOARD COLORADO: E. H. McCLEARY Alamo SAMUEL TESCHER Denver UTAH: DAVE BROWN :Storrs JOHN JENNINGS Hiawatha NEW MEXICO: JAS. McDOUGALL Van Houten GEO. MIKSCH Gallup WYOMING: T. H. BUTLER Hanna L. A. NORMAN Sheridan]

Jan 1, 1925

The morning session opened at 9:00 a.m. and was presided over by Mr. George A. Nugent, Manager Mining Division, Peter Kiewit Sons' Company, Sheridan, Wyoming. The first speaker was Mr. Jack Huebler, Vice President Research, Institute of Gas Technology, Chicago, Illinois. Mr. Huebler joined IGT in 1961 as Director of IGT's contract research program, a major part of which is IGT's extensive coal gasification work. He is also an adjunct associate professor at Illinois Institute of Technology, teaching gas utilization. Before joining IGT, Mr. Huebler spent 20 years with Surface Combustion Corporation where he was chief research engineer. He developed, designed, and constructed a wide variety of heat processing equipment and the associated chemical processes and was involved in applied research in heat treating, gas chemistry, and gas-solids reactions. He has carried out extensive research on the heat treating of ferrous metals, oil gasification and gas combustion, and has made major contributions to the development, construction, and operation of large-scale industrial furnace equipment. He received B.S. degrees in 10th chemical engineering and mathematics from the University of Michigan in 1941. He has 60 publications including 15 patents. He is also a world traveler in the field of engineering. Mr. Huebler's subject "Gasification of Western Coals." (See Index for printed text of Mr. Huebler's paper.)

Jan 1, 1972

Earl W. Baker W. P. Bigler Lyman Fearn Leslie H. Johnson V. O. Murray Max C. Scheble Fred L. Smith who left the world better for their having lived in it . . .

Jan 1, 1986

By Fredrick D. Palmer

U.S. ENERGY: PUTTING PEOPLE FIRST Assessing Goals, Needs and Resources ?Decision-makers must balance the needs of average Americans with the need for: ?A strong economy ?A clean environment ?A secure nation ?Events of recent years ?terrorist acts, multiple energy crises and a global focus on sustainable development ?magnify the need to balance these principles ?Coal ?domestic, abundant, affordable and increasingly clean ?meets these needs like no other energy source

Jan 1, 2003

By Lyman Fearn

Men and institutions are what they are largely because of inheritance. Out of the past comes experience that enables men to build more wisely than did preceding generations. The field of possibilities has widened as the horizon of men's vision has been extended. The realization of these possibilities has depended largely on the application of men's natural endowments, brain and brawn, to the problems at hand. In the field of mechanized mining, Wyoming has a greater percentage of men with vision, who have a realization of the possibilities of mechanized mining, than any other state in proportion to tonnage production. With the introduction of mechanized mining systems have come problems that have caused the men who are connected with the safety work much thought. Discussions on mechanical drilling, cutting, loading, conveying, haulage, etc., have come in for their share of the debate. There have been a few attempts made to show that mechanical mining is safer than are the more primitive ways of doing underground work by man power. We also have a number of places in the coal producing States of the United States, where the mechanized systems have been abandoned chiefly on account of the safety element involved bringing about condemnation of the system by State inspection forces. Certain types of scraper systems have been condemned, and some have voiced opposition to long faces. This would lead us to believe that the question is still a debatable one as far as the safety element is concerned. It is only fair that we discuss the operations of mechanical systems and from the results obtained take analysis of conditions as they exist, basing our conclusions from the results obtained.

Jan 1, 1928

MR. LITTLEJOHN: Have you any maximum length that you make your dust barriers? What I mean by that is, your entries are 10 feet wide, and I believe if I remember right, in your single track entries you had only one dust barrier to cover the full width of the. entry in your double track entries, I believe you had two-I would like to know, have you any maximum length you make these barriers? MR. CHAS. LEGER, ROYAL FUEL CO., UTAH: It is stated that they shouldn't be over 8 feet long to obtain sensitiveness. If they make them over 8 feet they are not as sensitive as they should be. They should be made short for two reasons in order to keep the sagging out and to make them as sensitive as possible. MR. DAN HARRINGTON, U. S. BUREAU OF MINES: I didn't come here to enter into any extended discussion on rock dusting or to discuss in particular the situation at Dawson. At the February meeting at Denver, we made a complete study of this matter. Since that time a report was completed and reported to the Phelps-Dodge Corporation and Mr. Moorhead probably has a copy of it, which can give you more complete information as to what we found. We found that with the adobe dusting that they have done, they had six miles of entry pretty thoroughly dusted and of all the samples we took, at least 95 percent of them showed that not only the floor but the ribs and roof were in such a condition that an explosion could not originate in any part of this entry. In other words, this entry as it was dusted was absolutely protected from ignition and propagation. The adobe they used was of material that was non-combustible. In most instances there was not more than 3 per cent of moisture in it.

Jan 1, 1924

By Stuart A. Sanderson

Founded in 1876 - oldest continuously operating mining association in the United States 700 Members representing mineral resource industry in Colorado and the west Spokesman for the industry before the legislature, agencies, Congress, and the courts

Jan 1, 2010

President Ziolkowski called the meeting to order at 9:30 a.m. He called on the Auditing Committee to give its report. Jack Leech read the report and asked that it be approved. A motion was made, seconded and approved. The Resolution Committee was asked to give its report. The following was submitted: (1) RESOLVED, WHEREAS, in the year since the last convention of The Rocky Mountain Coal Mining Institute, the Institute and the Coal Mining Industry have suffered the loss through death of the services of the following: James A. Flint John L. Paynich Joseph E. Ward NOW, THEREFORE, BE IT RESOLVED, that there be spread upon the minutes of The Rocky Mountain Coal Mining Institute recognition of the passing of these members, who have so greatly contributed to the advancement of the industry, both nationally and in the Rocky Mountain area, and that a copy of this resolution be sent to the next of kin as evidence of the sincere regard and sympathy of the members of the Institute.

Jan 1, 1981

[Following is the Financial Report of the Treasurer from May 22, 1981 to May 21, 1982: RECEIPTS Cash on hand May 22, 1981 $21,815.81 Dues $ 6,800.00 Registrations 19,250.00 Banquet, luncheons, Buffet and Steak Fry Tickets $44,335.00 Less adjustment 831.68 43,503.32 Bank Interest and Certificate Interest 7,747.49 77,300.81 $99,116.62 DISBURSEMENTS Convention Expense - 1981 48,600.37 Convention Expense - 1982 2,146.65 Stamps & Stamped Envelopes 1,251.48 Stationery & Office Expense 1,259.22 Salary of Secretary-Treasurer 5,040.18 Social Security & Employment Tax 772.20 Proceedings $ 9,703.42 Less Advertising 2,290.00 7,413.42 Certificate Purchase 10,000.00 76,483.52 Cash on hand May 21, 1982 22,633.10 United Bank of Denver Savings Account 15,000.00 Money Market Certificates 40,000.00 Total Assets $77,633.10 AUGUSTA WHITESIDE Secretary-Treasurer Approved by Auditing Committee: Paul Hronich, Chairman Robert Anderson Allen E. Duncan Donald P. Huckeby Richard C. Mullins June 29, 1982]

Jan 1, 1982

[ ] Digital images of the highwall are taken from the spoils bench. Two images of the same highwall segment are are taken from two different locations. The resulting overlapping images are used to create a three-dimensional image of that section of highwall.

Jan 1, 2005

By Jeff Mattern

Topics of Discussion ?Navajo Mine General Information ?Mapping, Photogrammetryand Image Fans ?Planning: Equipment, Control Points, Targets ?Digital Photography ?Software Manipulations: Image Matching, Creating a 3d Image and Triangulation, ?Mapping? Geologic Structure, Data Analysis ?Conclusions ?Other Applications

Jan 1, 2005

The third session of the Rocky Mountain Coal Mining Institute was called to order by Edward G. Fox, President of the Bitumious Coal Operators' Association, Washington, D. C., at 9:M A.M. He stated he had enjoyed being present at the Institute the past two years, and was honored to be asked to preside at this morning's session. Mr. Fox introduced Cloyd M. "DOC" Smith, Vice President of World Mining Consultants, Inc., Washington, D. C., whose talk, "World Trade in Coal" was illustrated with a number of graphs. (See Index.) M. E. "Shorty" Wade, Assistant Purchasing Agent, Kaiser Steel Corporation, Fontana, California, was introduced and gave a paper on "What Is Required to Realize Profits Through Purchasing." (See Index.) Mr. Fox suggested that all members take an active part in their association. He stated that much more can be done in association work than as a lone wolf. He urged all to support their organization and stay with it. It is for each member's good and not for the good of a few. Carl G. Schilbe, District Manager, Jeffrey Manufacturing Company, Columbus, Ohio, was introduced, and he presented a paper on "Results of a Study in Belt Idler Design -The Perma-Seal Idler." This paper was illustrated with a number of slides. (See Index.) "Operation of A-C Mines," was the topic covered by W. C. Painter, Service Engineer, Joy Manufacturing Company, Price, Utah. (See Index.) Each of the papers was well received, and presented a number of things valuable to all who heard them. Mr. Fox then turned the meeting back to President von Storch who read several announcements of committee meetings, and the meeting was adjourned at 11:30 A.M. for an afternoon of recreation before the banquet and dance that evening.

Jan 1, 1958

The 64th Regular Meeting of the Rocky Mountain Coal Mining Institute convened at Jackson Lake Lodge, Grand Teton National Park, Wyoming, and was in session at 10:00 a.m. The meeting was called to order by Past President .Tames Westfield. He introduced Mr. Raymond C. Lillie, President of Grand Teton Lodge Company, who welcomed the members to Jackson Lake Lodge. Mr. Lillie stated he had been with the organization since the Lodge was built. They had a snowstorm the day before our meeting so stated it was perfect weather for coal miners. Mr. Westfield introduced President Joe T. Taylor, Superintendent, York Canyon Mine, Kaiser Steel Corporation, Raton, New Mexico. Mr. Taylor was born in Miami, Florida. Attended the Colorado School of Mines and graduated in 1952. He was associated with Sunnyside Operations of Kaiser Steel Corporation in Utah until 1962. Was then transferred to the Koehler Mine in Raton, New Mexico, as Superintendent, and had charge of opening the new mine, York Canyon, and at the present time is in charge of Kaiser operations there.

Jan 1, 1968

By C. A. Allen

In presenting a summary of the uses of fine and pulverized coal the writer has borne in mind that we are not trying to determine what a combustion engineer should know but we are only trying to find out in what ways the consumption of slack can be stimulated. First discussing the use of powdered coal it can be stated that it has passed the first experimental stage but is still capable of much development and improvement. It has already found successful application in stationary and locomotive boilers, cement kilns, calcining furnaces, reverberatory smelting furnaces and many other types of furnaces, such as open hearth furnaces and annealing furnaces. For stationary boilers it seems to have been thoroughly demonstrated that powdered coal is more efficient than stoker installations. Over-all efficiences of boiler and furnace in stoker installations of the best type run from 70 to 76 per cent; whereas the efficiency of powdered coal installations averages slightly over 80 per cent. However, due to the increased cost of pulverized coal, the increased efficiency of these installations over stokers, from a money stand-point, will not be more than 1 or 2 per cent. The fusing of the ash in pulverized coal installations has given some trouble but apparently is easily overcome, on the other hand the fine ash, which is carried along with the draft, causes trouble both in the boiler and by settling on surrounding buildings or ground. Offsetting the disadvantages the great advantages of pulverized coal for stationary boilers seem to be: First-the ease with which a change in the load on the boiler can be taken care of. Second-when a boiler is cut out for a short period the "stand-by" losses are much less and, Third-a much poorer grade of fuel can be used. In many cases where pulverized coal has been used it has replaced slack coal which is of little advantage to the coal operator. However,, in other places it has replaced gas or oil and this is where the coal man is interested. Pulverized coal has the same advantages as the liquid or gas fuel but the question as to which is preferable depends on their relative cost at the point of use. In small stationary boilers where stokers are not used, very frequently the larger sizes of coal are, and it would be an advantage to the coal industry for them to be converted so as to burn pulverized coal, but so far there are only records of a few of such small installations having been a success and there is apparently room for a large amount of experimentation. In furnaces, such as smelting and assaying furnaces, annealing furnaces, etc., slack coal is not used and where pulverized coal has been installed it nearly always replaces fuel oil or gas. Just how much increased consumtion of coal can be made by pulverizing it for use in furnaces of this type can not be determined but it seems worthy of investigation. For locomotive boilers pulverized coal has found some application up to date but where it was being used in the United States it was stopped when we entered the war. In Brazil, however, the Central Railway has been using pulverized coal for locomotives with excellent results. If it could be possible to apply it to locomotive use where fuel oil is now used, or the larger sizes of coal, it would certainly make a big difference in the slack situation. Now as to the uses of slack coal without pulverizing. The writer's investigations lead him to believe that the greatest opportunities in this direction are in the line of increasing its use by apartment houses and small home owners. In fact in looking into the subject I found that a number of men in Salt Lake City are using run of mine coal in the usual type of house furnaces, some of them by separating the fines and wetting them down before feeding to the furnace claim they get no loss whatever through the grate. However, for best results with fine coal different types of furnaces must be installed and for apartment houses it would seem necessary to have either a small automatic stoker or else spray the fine coal in with an air blast from

Jan 1, 1922

Jan 1, 1941