Search Documents

In North-West Nelson the Riwaka Complex, a linear basic intrusive complex, is exposed for approximately 45 kilometres. Some 500 kilometres south, across the Alpine Fault, a linear zone of similar but less well known basic intrusives that may be correlatives of the Riwaka Complex is exposed discontinuously for about 80 kilometres. The Complex was emplaced at several centers along a major tensional fracture zone that developed in upper Carboniferous to Lower Permian time. This fracture zone probably formed in response to the development of a west dipping subduction zone that gave rise to the Permian volcanic arcs in east Nelson and western Southland. The Riwaka Complex contains three rock suites. The Fractionation Suite, characterized by cyclic mineral layering and small scale cumulus banding is the largest and is divided into the Ultramafic, Hornblende and Plagioclase Series, each of which is subdivided into several units. The Cumulus Gabbros represent a restricted but important suite of unusual composition, while the third suite is the late phase Diorite Suite.

Jan 1, 1980

By Edmonds W, Giles C. W, Webb R. J, Gum J. C

Gold production from The Granites - Tanami Goldfield during 1993 is expected to exceed 8 t, eclipsing that of the traditional Northern Territory gold mining districts of Tennant Creek and Pine Creek. This is the result of dedicated and successful exploration, and the consequent discovery of new orebodies such as those at Dead Bullock Soak.Following granting of access to regional exploration areas in 1988 and identification of favourable host rocks in the Schist Hills area, North Flinders Mines (NFM) began a methodical exploration program of detailed geological mapping, rock chip sampling, costeaning and various types of drilling. The first resource of 600 000 t of 3.3 g/t gold was announced in mid-1989. This has grown progressively with systematic exploration to the currently published resource inventory of 6.6 mT @ 5.4 g/t, (as at 31.12.92) contained in six separate orebodies within the Dead Bullock Soak Mineral Lease at Schist Hills.

Jan 1, 1993

By Munive L

As a result of commissioning No.5 B F, 2670m3 inner volume, in March 1972, the largest B F in Australia; new expertise in maintenance, furnace operating practices and design have been obtained. This experience has also been extended to the other furnaces. A series of operating problems were con- fronted; all parts of the furnace, including the hearth side walls and bottom,were adversely affected. In December 1977, serious hearth wall wear was detected at No.5 B F, and a potential hearth breakout was averted. Hearth wear in No.4 B F was discovered in March 1979, and emer- gency underhearth cooling was installed to reverse an extremely advanced hearth bottom erosion. Hearth behaviour of No.5 B F oampaign 1972-1978 and`No.4 B F campaign commencing 1972, has been studied and discussions on the causes, effects and measures undertaken to protect the hearths are presented in this paper.

Jan 1, 1981

By K Knorr

Desktop X-ray powder diffraction using a D2 PHASER equipped with fast linear detector was performed on several iron ore and mill scale samples. Data were analysed using cluster analysis and Rietveld quantitative phase analysis. The quantitative mineralogy of both materials could be established. Thus the input is provided for understanding the energy consumption and the CO2 emission during iron production. Furthermore, tabletop XRD allows to distinguish iron ore from mill scales and to quantify their mixtures.

Jul 11, 2011

The object of this paper is to show in some detail the mining challenges that have been presented and overcome during the successful development of the main exhaust ventilation drive that will service the Ballarat East mine during its 20+ year lifespan. Topics to be discussed in this paper include the ground support regimes employed, the ground conditions encountered during construction, how the heading was recovered after falls of ground and the effectiveness of geotechnical probe drilling at Ballarat.

Jan 1, 2006

In the 25 years since Broken Hill's 75th Anniversary which was marked by an Australasian Institute and Mining and Metallurgy Conference in Broken hill, there have been some significant changes in the role of mines inspectors. This paper updates the information given by the then Chief Inspector of Mines, J.H. Burford, to that 1968 Conference, with an emphasis being placed on mines inspection, although it also reflects changes to mining legislation and regulatory bodies.

Jan 1, 1983

Minerals are of course important to our way of living and hence the search and exploitation of minerals has always had a high priority in Australia. Metal mining commenced in South Australian in the 1840s when silver-lead and copper were first mined. This was Australia's earliest mining era and led to the rush that never ended. This and subsequent mining periods have had significant, widespread impact on local and national economic development, settlement, and social conditions.

Jan 1, 1993

The traditional form of project financing for resource related projects has involved project financings structured with either recourse to the project sponsor(s) or commercial banks accepting the project's risks, usually after project completion, subject to, inter alia, the nature of the project, geographical location, quality of the projected cash flows and commodity price outlook. However, the concept of commodity-linked borrowings hasadded a new dimension for borrowing opportunities for resource-oriented projects and or companies.

Jan 1, 1985

Predictive chemical models facilitate the selection, design and assessment of aqueous chemical processes. The development of expertise in aqueous themochemistry has not matched the explosion in computer technology for modelling, which has placed pressure on the need for acquisition of skills to critically assess the appropriateness of the models produced. The 'blind faith' culture which appears to be developing must be arrested by appropriate programs at the tertiary level and professional development strategies in the minerals industry.

Jan 1, 1996

Contractors have penetrated all areas of the Australian mining industry over the last 15 years. The process started in the WA gold and nickel mines and has since spread around the nation to iron ore, base metals and coal mines.The mine contracting industry has progressed from tentative beginnings in the 80s to the current situation where it is now providing high standards of professional management, safety and workmanship with competent people and high quality plant and equipment.

Jan 1, 1998

The Granites Gold Mine has far exceeded the design capacity of 300,000 tonne per annum during its first sixteen months of operation. The presence of considerable free coarse gold has made it imperative that the gravity section operate at maximum efficiency. The inadequacy of acid digest- ing facilities and trying climatic conditions prompted management to initi- ate investigations into the use of Intensive Cyanidation as an alternative method for upgrading gravity concentrates prior to smelting.

Jan 1, 1988

The bureaucracy in Victoria has worked against exploration and mining development. There is no doubt that the new Mineral Resources development Act has simplified matters on the mining side of the system. However, WMC's Bendigo and Deep Lead experiences demonstrate that other parts of the bureaucracy can cause serious delays. The mining industry continues to view the approval process causal of excessive costs and delays compared with other States (and countries) and prohibitive to investment in Victoria.

Jan 1, 1992

Mathematical economic models for assess ment of technological progress in the mining industry in the USSR are discussed. The models are based on a simple index, TT which approxi- mates the rate of growth of the people's living standards. However, for application in the mining industry it is necessary to incorporate various parameters to account for the dynamic charges in the geological, mining and other technological conditions. Derivations of the models are shown and examples of results are Included.

Jan 1, 1977

The Cleveland Mine has an annual ore production of 400,000 tonnes at a grade of 0.79 per cent tin and 0.30 per cent copper. It is achieved by an open stoping method, mechanised overhead sub-level benching. The operation is trackless with a ramp access from all working places to the surf- ace. Broken material is loaded from the stope and development headings into diesel trucks and hauled to the surface crushing plant.

Jan 1, 1977

By Ketteridge IB, Mulcahy DE, Quast KB

The long term energy demands in South Australia are such that there is a distinct possibility that one of the lignite deposits in the State will be exploited to feed a pulver- ised-fuel power station. Bowmans lignite deposit is the largest lignite deposit in South Australia and is considered to be a contender. The deposit is ideally situated (100 km north of Adelaide) but the quality of the lignite is poor (see Table 1). TABLE 1

Jan 1, 1984

By Weber D, Knox PR

The criteria developed for the Argyle Diamond Mine process plant control system are reviewed. The control system installed is described along with a discussion of the method of implementation adopted. The control system was extensively tested prior to instal- lation at site. This approach led to signi- ficant time savings during plant commissioning and facilitated rapid escalation of plant production. The control system has performed satisfactorily with a high level of operator acceptance and basically satisfies the criteria Developed.

Jan 1, 1986

By McMahon DW

The major components of a mineral reserve estimate for project development purposes are described with respect to sampling, geology, estimation methods, mining factors, metallurgical factors, environmental factors, financial and other factors. Each of these components impact to varying degrees on the recoverable metal or product of a new mining project. The evaluation of a project is a complex process involving the best the profession can provide in terms of geological understanding, engineering ingenuity, metallurgical skills and financial evaluation.

Jan 1, 1983

By Woodcock J. T, Rummel P. H, Sparrow G. J, MacRae C. M

A rapid automated search method, developed for the location of native gold grains in polished sections with a scanning electron microscope (SEM), has been extended to locate platinum group elements (PGE), in particular platinum and palladium, and their minerals down to 1 ¦m in size. Problems associated with the search for PGE minerals are discussed and examples of PGE minerals located with the facility in drill core sections, crushed ores, and metallurgical test products are given.

Jan 1, 1991

By Turner T. M

The problem of metering fine particulate material at low flowrate is often encountered in metallurgical experiment. This note describes a feeder which wa developed to provide metered flows of copper sulphide concentrate in the range of 0'1-0'7 g/min.It is believed that the present device is easier to operate than previously described feeders (e.g. Hamor and Smith, 1971). It may have applications in the field of analytical chemistry, as well as in metallurgical investigations.

Jan 1, 1978

By Lynch P

Oaky Creek Coal Pty Ltd. currently mines high quality coking coal from both underground and open cut operations at its Oaky Creek Mine. Coal is transported by rail to the Dalrymple Bay Coal Terminal south of Mackay and to the Gladstone Coal Terminal. Oaky No.1 Underground Mine, Open Cut and Highwall Mine have concentrated on seams from the German Creek Formation, one of the major productive coal measure formations in the Bowen Basin Coalfields. (Fig. 1) location map.

Jan 1, 1998