Search Documents

By I. M. Charles

Mr. Chairman and Gentlemen: At the request of our Secretary, Mr. Shubart, I am pleased to present the following brief discussion of the Alamo Washery. In order to insure an excellent and uniform preparation of nut coal, the Alamo Coal Company erected last year a modern washery at a cost of about $50,000, in which, since the completion last December, all of the nut coal shipped from the Alamo Mine, has been washed. In part of the workings of the Alamo Mine, the coal is overlaid by a lenticular strata of slate, which invariably falls when the coal is shot down and breaks for the most part into fragments of such size as pass through three-inch round perforations, and are retained on plates having one and a fourth inch round holes with the nut coal. This "draw slate" comprises the principal impurity in the Alamo coal, and to remove it, some bone and a few small fragments of sandstone from the roof and floor, the washery was designed and erected. The few impurities contained in the lamp are readily re-

Jan 1, 1926

Jan 1, 1922

MR. DICKINSON: There is an increase of dust in machine loading, especially with the McKinlay loading and cutting machine which was extremely dusty. MR. FORRESTER: Declared more dust must be expected because when loading by machinery, the coal is shot harder in order to make it easier for the machine to pick it up. He believes however, that there was less hazard because of the closer supervision possible by reason of the concentration of operation. MR. McAULIFFE: Machine loading more dusty than hand loading. D. HARRINGTON: The hazard is greatly increased by modern methods of loading. Not only do the methods increase the quantity of dust, but they also increase the rapidity of mining and the increased quantity of coal broken down causes large quantities of gas to be released. The number of motors on loading machines and conveyors add to the hazard. No more dangerous places can be found for such motors than at the working face where there is excessive quantities of pure coal dust and where there is more gas than along any other point. Regarding Mr. Herres remarks that the machine loading was safer on account of the concentration and possibility of close supervision, Mr. Harrington said he believed concentration likely to prove a source of danger rather than its preventive. At Dolomite, Alabama, a number of men had assembled, and as a result what was a relatively small explosion killed a large number of men. Concentration is not without its dangers to mine operations. MR. McAULIFFE: These arguments do not appeal to me. Few places are better sprinkled than the working places in a machine loading mine. There is. more effective supervision, and there can be more ventilation. I believe machine loading will increase safety by that very concentration that Mr. Harrington deplores.

Jan 1, 1925

By T. H. Butler

The two most talked of questions in the mining industry today are rock dusting and mechanical loading. The one as a matter of safety, and the other as a matter of economy, and both are of vital interest to the mining fraternity. Rock dusting and other safety methods will be dealt with by others at this meeting, so I will confine my few remarks to the matter of mechanical loading. I will not attempt to tell you what mechanical loaders are doing in the different mining fields throughout the country, or what they should do, but will endeavor to give you an outline of the work being done with mechanical loaders in No. 4 Mine of the Union Pacific Coal Company, at Hanna, Wye. In order that you may better understand and be in a position to follow me it will be necessary to cite the conditions under which we are working. and the type of loaders in use. The seam pitches from 14 to 17 degrees, and is normally 32 feet in thickness, and is overlaid with a soft sandstone roof. The panel system of working is used, planes being driven on the pitch, and rooms driven on the strike. Owing to faults being encountered planes are driven between the faults, and the. rooms on either side are in some instances 800 to 1,000 feet in depth. Rooms are advanced eight feet in height, and 32 feet in width, by hand loaders and .Toy mechanical loaders, and when driven to the boundary,, 18 feet of the remaining 24 is loaded out with Thew electric shovels, and six feet left to protect the roof. In January, 1916 the company installed a Type 1 Thew shovel, equipped with a 1 1/4-yard dipper, and in July, 1917, they installed a Type 0 Thew electric shovel, equipped with a 1-yard dipper, and in the year 1918 two additional Type 0 Thew shovels, equipped with a 1-yard dipper, were installed, making a total of four Thew shovels for this mine. The introduction of these shovels caused the employees much concern, and like all departures from the old methods of mining, met with indifference by some and open antagonism by others, so that for some time they results obtained were not satisfactory. However, by constant supervision and changes in the method of haulage the results obtained at present, while not entirely satisfactory, are much better and the production and costs are reasonably good. The Thew shovels in use are mounted on traction wheels with swivel axle and move. in all directions by their own power, and while the weight of each is approxi¬mately 20 tons, they are not as cumbersome as. one would think and are easily operated. The system used in working these shovels is to shoot the coal clown ahead of the shovels and maintain two tracks, two cars being used on each track so that shovel is loading on one track while driver is, changing cars on the other. When place is finished the shovel is run back to the first cross-cut by its own power and lowered to the next room with block and tackle, the roof coal in cross-cut being shot down to a height of 16 feet to allow passage of the boom. With better results from the Thew shovels we soon realized that it was necessary to find some method of developing rooms faster than was being done with hand loaders in order to keep the Thew shovels in working places, and in November, 1923, the company purchased from the Joy Machine Company two Type 4 B U Joy loaders, and the installation of same met with the same indifference and antagonism from the employees as did the Thew

Jan 1, 1924

Jan 1, 1968

[ATZ, Inc. American Mining Congress Anaconda Minerals Company Andalex Resources, Inc Arapahoe Energy Consultants Atlas Powder Co Becor Western Inc. Mr & Mrs. Bernard Bernstrom Black Beauty Resouces British Mining Consultants (USA) Limited]

Jan 1, 1988

Jan 1, 1979

Jan 1, 1976

Jan 1, 1965

The Morning Session of the Forty-Eighth Meeting of the Rocky. Mountain Coal Mining Institute convened in the Little Theater of the Broadmoor Hotel, Colorado Springs, Colorado, at 9:30 a.m., June 3, 1952, Howard B. Crandell, President, presiding. PRESIDENT CRANDELL: Gentlemen, the meeting will come to order, and I would like to introduce to you your Chairman of this meeting, Mr. John B. Hughes, General Manager of the Union" Pacific Coal Company, Rock Springs... (Applause) CHAIRMAN HUGHES: From the activities around last night, I supposed there would be quite a few that would be unable to attend this morning. I am sorry there are not more here because I am sure we have some interesting papers. First on the program this morning is, The Effect of Continuous Mining on Today's. Coal Industry by Mr. William Wearly, Vice President of the Joy Manufacturing Company. Mr. Wearly: (Applause)

Jan 1, 1952

[ ]

Jan 1, 2000

Jan 1, 1977

Jan 1, 1942

Jan 1, 1971

Jan 1, 1958

Jan 1, 1948

Jan 1, 1938

Jan 1, 1967

Jan 1, 1969

Jan 1, 1973