Search Documents

By M Miettinen

That microorganisms, both living and dead, and products derived from the organisms, can function as flotation agents and flocculation agents is abundantly clear. They can modify the surfaces of minerals. They can function as flotation collectors and as flotation depressants and activators. In many cases they or their products can function as specific flocculation agents. Problems that must be solved before such microorganisms or products from the organisms can be used in commercial operations include culturing the organisms at a cheap cost and reduction in dosages required for various separations. These tasks are formidable. However, the concept of using such natural materials in place of various chemical reagents that may be toxic is very attractive. An attempt is made to show some of the promise of microorganisms in mineral bioprocessing and to consider the problems that must be overcome before commercial application of the technology is realised.

Jan 1, 2005

By S Brunt

A new elution process has been developed for the recovery of gold thiosulfate from ion exchange resins. This is a synergistic system which utilises a base eluent, such as nitrate or trithionate, along with an additive that improves the elution of gold. The use of the additive enables lower eluent concentrations to be adopted, as well as weaker eluents such as chloride. With the chloride + additive system, complete gold elution can be achieved within 12 BV when utilising an eluent flow of 5 BV/h. When the eluent flow is reduced to 2 BV/h, complete elution is achieved within 8 BV. Similar results are obtained when using nitrate or trithionate as the base eluent. A copper pre-elution process has also been developed, whereby the majority of copper can be stripped within 5 BV prior to gold elution. This method is a significant improvement on the ammonia + oxygen pre-elution previously suggested. The development of a new analytical procedure based on ion chromatography with UV detection is also described for the quantification of polythionates in leach solutions and loaded on resins. This enables analysis to be carried out for resin-in- leach type processes where the polythionates are being formed in solution and simultaneously adsorbed onto the resin.

Jan 1, 2007

The seventies was a decade of intensive hydrometallurgical activity, firstly for copper recovery, then uranium, and finally gold. In comminution, semi-autogenous grinding was applied to uranium and gold ores. In leaching there were extensive investigations into pressure and in-situ systems, and into ammonia and chloride leaching processes. Solvent extraction became a major unit operation for copper recovery. New reagents and equipment were introduced. There was a resurgence of ion exchange for uranium as low grade sources were tapped and continuous ion exchange systems developed. Carbon-in-pulp technology came to the fore for gold recovery with the development of desorption and electrowinning systems. Electrowinning was widely applied for copper in conjunction with solvent extraction. There was a continued move to greater mechanisation and higher current density. There were important developments in solid-liquid separation such as high capacity thickeners, belt filters and sand filters. Many of these trends will continue in the eighties. Interesting new developments can be expected.

Jan 1, 1981

By T Galvin

Drilling and blasting at Westside Mine near Wallsend, NSW, has presented a challenge for Orica Explosives, Australia. The colliery produces 600 000 tonnes of steaming coal per year from two seams using surface mining techniques. Tapping into underlying coal will greatly improve the yield, but there are many issues which make this an enormous challenge. Hunter Valley Earthmoving engaged Orica Explosives to supply the explosives products and to provide much of the blasting expertise that is needed on the minesite. Hunter Valley Earthmoving and Orica Explosives have proven to be an outstanding, unified technical team on this project. The success of the team is based on good communication, progressive attitudes, extensive expertise in blast design and most importantly, care and accuracy in implementing the agreed upon designs.

Jan 1, 1999

It has become increasingly clear in recent years that human kind has developed the capacity to alter the environment of the Earth on a global scale. The changes are often subtle. This is particularly true in the case of stratospheric ozone. Ozone is produced primarily in the stratosphere, at altitudes in excess of 20 km, initially through the action of ultraviolet sunlight dissociating molecular oxygen. According to theory as it existed up to a few years ago, ozone is removed mainly by reaction with atomic oxygen. In the unperturbed environment, this reaction proceeds both directly, and by paths catalyzed by trace quantities of nitrogen radicals. Molina and Rowland [Nature, 249, 810, 1974] pointed out that decomposition of industrial chloroflurocarbons could in-troduce an additional source of radicals to the strato-sphere. Chlorine radicals are even more efficient than nitrogen in catalyzing recombination of oxygen atoms with ozone; models suggested that we might expect reductions in the vertical column density of ozone of as much as a few per cent over the next several decades. A reduction in ozone of x¦/a, by increasing the flux of ultraviolet sunlight reaching the surface, was predicted to result in an increase of about 2x% in the number of cases of skin cancer, with other less well defined impacts on the non-human environment for life.

Jan 1, 1990

By S M. Mousavi

The issue of estimating evaporation in soils is central to the design of engineered soil caps for mine waste and landfill applications. In general, because evaporation from the soil is difficult to measure in the field, laboratory experiments and empirical methods have been used. Much of the earlier work has been conducted in soil science, although in recent years, geotechnical and geoenvironmental engineers have given great deal effort to this work. The result of this increased interest is the development of numerical models, such as UNSATH and SoilCover for estimating evaporation. In this study laboratory-measured evaporation from soil columns was compared with evaporation predicted using the computer program SoilCover, and the analytical method proposed by Gardner and Hillel. Good agreement among the results was observed. Also the sensitivity of the predicted evaporation to soil hydraulic and geotechnical properties, such as saturated hydraulic conductivity and coefficient of volume change was discussed and the practical implication of the sensitivity were highlighted. The work has application in the design and construction of soil covers over sulfide-bearing mine waste and landfills.

Jan 1, 2003

By D Stow, R Goodridge, K J. Molloy

A range of explosives has been specifically developed for soft ground blasting. These explosives can be used in both wet and dry blasting conditions, range in density from 0.3 - 1.2 g/cc and range in VoD from 2 - 4.5 km/s. This range of explosives has the potential to be tailored to ground type and is predicted to be suitable for a variety of applications which include: blasting in soft to medium overburden, coal blasting, wall control, and low vibration blasting. Trials have been conducted in several applications with encouraging results. Several cast/throw blasts have been conducted with these products partially replacing either ANFO or Heavy ANFO. The results from the blast have been equivalent in cast (per cent) and at reduced cost per unit volume. These products have also been used in presplit blasting and have again achieved equivalent or better results when compared to conventional presplit blasting at a lower cost per unit volume. This product has also been used in a vibration sensitive area replacing traditional explosive products, and generating excellent fragmentation and digging whilst maintaining vibration limits. This new range of products, NOVALITE, has shown great potential in many applications either reducing cost per unit volume, improving wall quality or improving productivity in environmentally sensitive areas.

Jan 1, 2001

This paper provides an expanded definition of industrial minerals that challenges the way we look at exploration, development and the understanding of mineral industry structure and profitability. Included in industrial minerals are bulk commodities such as iron ore and coal alongside the more traditional industrial minerals such as salt, soda ash, silica sand and clay. The profitability of industrial minerals is reviewed from a producerÆs perspective and shown in many instances to be significantly higher than for precious and base metal industries. The key drivers of profitability are examined along with some highly profitable industrial mineral industries such as borate, potash, chromite and natural soda ash. Demand for industrial minerals in Australia and Asia is reviewed, with a focus on supply bottlenecks and the opportunity this represents for investment by Australian companies. The establishment of new price benchmarks is considered and the possibility of new export grades for industrial mineral products. Investment opportunities in industrial mineral projects are outlined, including some exploration concepts in Australia and Asia. Industrial mineral project evaluation methods are discussed and the challenge issued to companies (exploration, production and finance) to become a part of the profitable action in the world of industrial minerals.

Jan 1, 2004

The Victorian State Government recognises that the extensive brown coal deposits in Victoria are one of the State's key competitive strengths for economic development. The unique properties of the coal, together with the ease of open cut mining, make it suitable for a variety of new applications. Research and development activities are centred around applications which take advantage of the natural attributes and unique properties of the coal. The high reactivity and low ash content of the coal led to its selection for the Japanese brown coal liquefaction pilot plant currently operating in the Latrobe Valley, with support from the Victorian Government and the Coal Corporation of Victoria. Research and development of new brown coal based products together with many other areas of applied and fundamental research are being conducted in Victoria by Government research organisations, tertiary insti- tutions and private industry, with the objective of establishing new indus- trial developments based on Victoria's vast brown coal resource.

Jan 1, 1989

The underwater test is now being used routinely to characterise explosives and initiators. However, several outstanding issues regarding the role of confinement and the usefulness of the test results in predicting expected blasting performance require further elucidation. This paper reviews the underlying principles governing the test, and highlights its relative advantages and disadvantages in product development and applications. It deals with topics of energy release, energy partitioning, confinement and efficiency, supported by illustrative examples from tests with various products and geometries. The results are analysed in terms of both the detonation parameters measured and their extension to predicting blasting performance in the field. It is emphasised, that just as with other performance tests, the results and conclusions are only valid under the particular test conditions employed, and over-generalisation of these results can lead to erroneous conclusions.

Jan 1, 1999

By A Quigley

The Northside Storage Tunnel Project in Sydney includes over 20 km of TBM driven tunnels, over 3 km of declines and major caverns and pump rooms. The paper describes methods used for design on the project. Emphasis is given to the refinement of the use of empirical rock mass classifications, and to the use of discontinuum numerical methods.The use of empirical rock mass classifications in Sydney sandstone has usually led to conservative design because the systems are based on a random orientation of joints in the rockmass. Because the joint sets are usually oriented in a way that is beneficial for tunnelling, limits must be placed on the parameters used in the classifications system. The paper discusses these limits and the derivation of the parameters.The use of numerical methods in Sydney sandstone is discussed. Continuum methods have their uses, but discontinuum methods are preferred. The use of UDEC has been validated against a previous project, the New Southern Railway. Recommendations are given for UDEC models.

Jan 1, 1999

By Mishra S. N, Mishra R, Sen P. K

Control of silicon in produced through the submerged-arc furnace can result in reduced power and coke consumption in addition to improving the quality of the hot metal. A thermo-chemical analysis of the production of ferro-chromium was carried out to devise strategies to control the recovery of silicon during the manufacture of ferro-chromium. The presence of three thermochemical zones in the furnace with respect to the reduction of silica was recognised from this analysis. Any strategy for the control of silicon recovery has to take cognizance of these thermochemical zones. The effect of various strategies on the silicon level in the hot metal have been evaluated. Possible strategies, such as the reduction of coke level in the charge; the replacement of quartz; pre-reduction of the ore and the control of the temperature profile are discussed in this paper.

Jan 1, 1999

By D Brennan, S Jahanshahi, F Jorgensen

The recycling of metals can be very efficient with careful selection of the material being recycled. The volume and value of recycled ferrous scrap has lead to the development of steel mini-mills which in turn has caused major changes to the steel industry. Although much smaller in volume, the recycling of lead is very significant, with battery recycling accounting for 60 per cent of annual world production. This high recycle rate can be attributed to the relatively uniform feed-stock from lead-acid batteries. The recycling rates of other metals are considerably lower due to longer use and non-uniform product usage that results in less efficient segregation and processing. It is clear that recycling of metals has advantages but its sustainability is uncertain. What are the key benefits of metal recycling? Metal recycling has technical, economic and social impacts. It is relatively easy to assess recycling on a technical basis, but the social impacts are harder to evaluate. This paper examines some of the issues in evaluating the sustainability of metal recycling.

Jan 1, 2002

Those involved in managing risk today are asking various questions: why is it so frustrating to discuss æriskÆ with communities? why do consultative processes around æriskÆ get more and more complex? where is all this going to end? These questions will be addressed by examining how our understanding of risk has changed from one based on biophysical hazard to a broader view that includes social and cultural factors. There is evidence to suggest that we are living in a ærisk societyÆ, where the goal of æsafetyÆ has replaced that of equality in a class based society. The global mining industry operates within this complex and politicised environment. The very meaning of ædevelopmentÆ has broadened from the narrow economic vision to include the social and environmental factors which make up æSustainable DevelopmentÆ. Corporate accountability now extends beyond traditional shareholders to wide groups of stakeholders. The mining industry is developing responses which look beyond traditional technocratic methods. At the industry level these responses have included the recent Mining Minerals and Sustainable Development global and regional reports It has proven challenging and difficult to operationalise these new understandings at the company level and it is time to look at the bigger picture.

Jan 1, 2003

Highwall mining commenced in the Appalachian region 50 years ago. With innovative equipment design introduced in more recent times, penetration distances over 300 m are now commonplace. It is only in the last three years that highwall mining has become part of the Australian coal industry. Geotechnical evaluation is an integral part of the Australian procedures, and although still being refined, has already proven its worth. Statutory guidelines have also been prepared for operations in Queensland. This paper explores trends in equipment design, geotechnical prediction, operating techniques and statutory requirements with regard to highwall mining Australia's coal deposits. A quick assessment guide to assist in the evaluation of potential sites is included.

Jan 1, 1992

By V F. Kucherov, V A, V M. Kirienko

In the paper the problems of elaboration and building up the computer engineering system æSafety and stability of underground buildingsÆ as subsystems of the common automated computer system of geomechanical monitoring for deposits of mineral resources are considered. The theoretical bases and techniques of calculation of underground buildings stability are considered. The example of elaboration of such system for a Starobin deposit of potash salts (Belarus) is considered.

Jan 1, 2003

Anglo Platinum recognised with its expanded operations the need to change its evaluation strategy due to increased sample volumes and the pressure it created at laboratories. The sender/receiver analytical scenarios had to change in order to curb costs and to prevent substantial investments in new sampling and analytical facilities. Given the high cost associated with correct sampling systems and sampling protocols and the shortage of technical resources a strategy of single point sampling and analysis was introduced. The analysis was then done at an ISO17025 accredited laboratory with ten per cent checks, subjected to careful statistical scrutiny. Logistical problems increased with respect to weighbridge congestion, maintaining sampling quality, throughput of samples in the sample preparation areas, manual quality control systems in place, audit trails and analytical capacity throughout all operations. This required the expedited improvement of existing sampling practices and the development of new sampling methods and equipment. Anglo Platinum is classifying and standardising sampling equipment, sample preparation and analytical procedures for all process streams with the view to minimise overall uncertainties. Major investments were made into a customised LIMS and automated equipment for data management, reduction of manual transcription errors and streamlining of sample processing. Anglo Platinum is committed in rolling out the enhancements to all sites as priority dictates.

Jan 1, 2008

A sequence of ultramafic units, very well exposed in Munro township in the Abitibi areal, of the Cahadian Shield, exhibit features which indicate that they are sub-aqueous extrusions. They occur within a sequence of tholeiitic pillow lavas, thin graphitic sediments. and large differentiated sills. The units range from a few metres to more than 250 m in length and less than 1 m to over 30 m in thickness. Over 60 individual units, occurring as flat pancakes on top of one another, make up a total exposed thickness of 150 m. The units have formed from a magma composed of a very olivine-rich picritic liquid carrying up,to 40 per cent olivine phenocrysts in suspension. Different units display a variety,of cross-sectional profiles. As an example of the most extreme type of profile, a typical unit 2 m thick consists of a cap of highly jointed fine-grained quenched rock, 10-30 cm thick, which becomes coarser downwards, grading into a zone composed of radiating and criss- crossing skeletal olivine crystals forming the well-known spinifex texture. This becomes even coarser-grained downwards, with "books" of parallel platey olivine crystals developing sub-perpendicular to the plane of the units. Beneath this zone, which may be up to 1 m thick, there is an abrupt transition to a cumulus-textured rock composed of rounded

Jan 1, 1973

Most internationally traded iron ore resources are derived from multiple mine sites, transported to a port facility where they are blended and possibly further processed prior to shipping. Provided the proportion of contributions varies over a number of shipments an estimate can be made of the bias introduced by mine site sampling, analysis and materials handling systems, using zero-intercept multiple linear regression. Further regression applied to the residuals allows the error variances for the source mines to be estimated. Various sampling strategies are used by the industry. All have shipment-loading sampling on which payment or at least provisional payment is based. In most cases sampling prestockpile is used at mine sites to verify estimated production grades. Train grades are estimated from mine stockpile grades and in some cases train grades are verified by port input sampling. The methodology used is presented in this paper. Simulated data have been used and do not reflect the actual performance of any operator. The merits of the various systems and the implementation and potential limitations of our method are discussed more fully in a companion paper (Ziegelaar and Everett, 2010).

Mar 1, 2010

SASOL Synthetic Fuels has recently completed the design of sampling systems for raw and blended coal feeding the gasifiers at Secunda, South Africa. The new systems will replace manual, stopped belt sampling and have been designed to achieve specific accuracy targets on a daily basis. The sampling system is unusual in the coal industry in that the fines content (-5.5 mm nominal) of the coal is very critical and is to be determined with high accuracy.The sampling system was designed to meet carefully considered target accuracies using methods of modern sampling theory. The heterogeneity of the coal streams involved with respect to the critical analytes was determined by appropriate sampling and sample analysis. The statistical characterisation of the time variation of analytes in the process streams was based on variograms derived from on-line ash gauges. From this point, the design was completed using fundamental statistical sampling theory and some simulation studies. The paper discusses the development of the sampling system design in detail as well as the plans to use the data stream to provide timely alarms when the coal quality deviates from the target specification.

Jan 1, 2002