Search Documents

Authorisation No.66 (to Prospect) was allocated to R.W. Miller & Co. Pty. Ltd. on 1st November, 1976. Exploration has brought coal reserves to measured status in the Jerry's Plains sub-group which are about 550m. thick. The immediately lower Vane Sub-group, about 200m. thick, includes about 20 seams. The total measured and indicated reserves of the two sub-groups based on the criteria adopted by the company amount to 1362 million tonnes in situ. This very large resource is subject to very many mining constraints both physical and economic which limit the saleable reserves under present conditions to about 120 million tonnes. The results of the calculation of reserves after exploration is complete in a deep multiple seam situation is dependent upon the criteria used to include or exclude seams in the reserves. These criteria are state- ments of the miner's expectations of the market, mining and coal preparation technology, local and national politics and the law as it may be applied in the future.

Jan 1, 1979

Development of the Greenvale orebody, containing 40,000,000 tonnes of nickel ore, began in 1971 and production commenced in 1974. Annual capacity is 2,800,000 wet tonnes. The variations in ore grade and physical characteristics which occur throughout the ore- body had a major influence on the selection of mining methods, grade control procedures, and equipment. After removal of overburden by scrapers, ore is excavated by draglines sidecasting into windrows. Feed to the crushing plant is .reclaimed by front end loaders into rear dump trucks according to a grade selection pro- gramme. After crushing, ore is stockpiled into blended units of ore of required quality. Ore is stacked and reclaimed for train loading using techniques designed to give maximum mixing of ore characteristics through Bach unit. These procedures are repeated on discharge at the plant site at Yabulu. The railway, constructed by Queensland Nickel Pty. Ltd. to Q.G.R. standard, and operated by the Q.G.R., is 216 km long and includes eight major bridges and three tunnels. Two trains per day, one of four locomotives and 92 waggons, and one of three locomotives and 69 waggons, haul crushed ore to Yabulu. Train loading is semi-automatic. A small township and associated services have been constructed for employees at Green- Vale.

Jan 1, 1974

By E Villaescusa

This paper describes a methodology for the design of mine pillars at the McArthur River Mine. The pillar strength is calculated using a method that accounts for confinement, pillar geometry and intact rock properties. The average pillar stress was calculated using in situ measurements of vertical stresses at shallow depth and the tributary area method in conjunction with numerical modelling. Observations of pillar behaviour indicate that an existing pillar stability graph may be slightly conservative and further adjustments for the local rockmass conditions are needed. The results to-date indicate that all mine pillars are stable for a range of mining geometries at McArthur River Mine.

Jan 1, 1998

By A I. M Ritchie, G P. Timms

Monitoring of water infiltration into WhiteÆs waste rock dump at the Rum Jungle mine site in the Northern Territory, Australia, started in 1983, and has since produced a unique and long-running data set. Following closure of the uranium mining operations at the site, a soil cover was constructed on the dump in 1984 primarily to reduce water infiltration into, and the quantity of low quality effluent out of, the waste material. The performance of the cover in reducing water infiltration has been monitored using ten lysimeters installed across the dump prior to construction of the cover. Over the past eight years or so, the average infiltration rate as measured by the ten lysimeters appears to have risen compared to the early years of monitoring. The significance of this apparent increase is discussed given the variability observed in the data from individual lysimeters, and the variability in the rainfall. Estimates of the infiltration rate as measured by each of the lysimeters are examined using statistical tools. It is concluded that the infiltration rate has increased with time and with increasing rainfall. The increase with time is a stronger factor than the increase with rainfall. It is further surmised that the cover system at the locations of the lysimeters is less effective now at reducing infiltration into the dump than it was when newly installed.

Jan 1, 2003

By F De Beurs, S Davies

With the emphasis on CO2 emission legislation and the increasing price of traditional fossil fuels like coal, oil and gas, the use of alternative fuels is becoming more and more attractive for the industry, particularly for the cement industry. The variety of materials burnt in the kiln is enormous and varies from tyres, to animal meal and other waste material or by-products that would otherwise end up in an incinerator or landfill facility. This wide variety in materials demands thorough analysis to determine what elements are present in the organic matrix. The elements present may have an influence on the process or the quality of the cement. Toxic or environmental unfriendly elements may be incorporated or dissolved in the clinker phases; whereas volatile components may be present in stack emission to the atmosphere. X-ray analysis is already the key to elemental analysis in cement production, and is used here to determine the composition of these alternative fuels. The XRF spectrometer configuration used in this study is designed to overcome the difficulties associated with the analysis of strongly varying light organic matrices containing heavier elements in minor and trace-level quantities. Heavy element specific excitation conditions and three-dimensional polarised optical geometry increased the signal to background ratio and improved detection limits compared to conventional XRF spectrometers.

Jan 1, 2008

BHP Billiton Mitsubishi Alliance, or BMA, is AustraliaÆs largest coal miner and exporter, and is currently responsible for around a quarter of AustraliaÆs total annual coal exports. BMA and its predecessors have been part of the Queensland mining scene for around 40 years, developing world-class mines, a port, overseas markets, and an international reputation for quality and reliability. From its production base in QueenslandÆs Bowen Basin, BMA produces a broad suite of coals which are supplied to 73 customers in 24 countries. BMA was formed in June 2001 as a partnership between BHP Billiton and Mitsubishi Development Pty Ltd, under which the two companies share equal ownership and management of eight Central Queensland coal mines û Goonyella Riverside, Broadmeadow, Peak Downs, Saraji, Norwich Park, Gregory, Crinum and Blackwater û and the Hay Point coal export terminal near Mackay. This case study focuses on Peak Downs Mine, which was the second largest open cut mining operation to be developed in the northern Bowen Basin for the original CQCA Joint Venture. The first coal was mined in April 1972 and today, Peak Downs has a production capacity of over nine million tonnes of coking coal per annum. The mine is located 30 km south of Moranbah and 195 km south west of the Hay Point port facilities. Coal is mined by open cut mining methods using six draglines and two truck/shovel stripping fleets for overburden removal. Coal seams are mined using excavators and front-end loaders and 210 tonne capacity coal haulers.

Jan 1, 2007

By Smitham J. B

A selection of Australian washed coal samples was examined to determine the effect of sample hydrophobicity (rank) and particle size on froth stability in the flotation process. The results indicate distinct rank-based variations in froth volume and stability for flotation tests conducted without the use of collector, over a series of particle size distributions.High-rank coals showed a greater tendency to generate stable, high-volume froths than coals of lower rank. Implications for circuit design and operation are outlined.

Jan 1, 1988

Although the bromo-cyanide or Diehl process for the extraction of gold from its ores is used on several of the Kalgoorlie mines, very little information has been published on the original process, and no details are available from the various mines now using it. The following description of the process as carried on at the Hannan's Star plant, where several modifications were introduced by the author, will therefore be of interest to mining men, and it is hoped that some discussion on this paper will provide further useful information to the mining community.The process was first installed on the Hannan's Star mine, where a full working plant was erected by the London-Hamburg Co. In their contract they guaranteed a 91 per cent. extraction on a sulphide ore of 15 dwt value. This was considered a very high extraction at the time, and the plant successfully carried out its work.The new features in the process were the finer grinding of the ore, for which purpose the tube mill was introduced, and the addition of a solution of bromo-cyanide to the vats under ordinary cyanide treatment, whereby a higher extraction was obtained in a shorter time. The main difficulty in the process was the easy manufacture of the bromo-cyanide solution, but this was eventually overcome. The mixed salts now supplied by the LondonHamburg Co. are in every way satisfactory, and are supplied at such a price that the process compares favourably with any other from a cost point of view.

Jan 1, 1907

In this paper, a subtle, but important, difference has been drawn between responsibility and mandate. Responsibility has a connotation of financial involvement assigned to an organ- isation as a result of some action it takes, the ramifications of which can be ascribed directly to the organisation. In contrast mandate relates to the power and authority to act. The paper outlines the role of poli- ticians as community decision-makers and the need for Government policy to be flexible in an advanced industrial society so that decision- making options are kept open for as long as necessary. Further, broad community objectives need to be understood and defined so that plans and policies can be consistent. Co-ordination through communication at all levels, especially at the public administration interfaces and with the private sector,is essential for effective resource allocation and efficient implementation. The paper discusses several aspects of the infrastructure responsibility question and some considerations which might be viewed as important by the community decision-makers in considering what responsibility the "community" should accept in providing infrastructure.

Jan 1, 1974

By A D. Ferreira, A E. C, A D. Padovezi

The increasing market requirements regarding the quality of products, the enhanced predictability from detailed mine planning, the need for process consolidation and upgrading require continuous investigation on the characteristics of different ore types to be concentrated. This paper addresses the mineralogical and technological characterisation of several itabirite iron ore types and the influence of the composition and mineralogical associations on desliming and flotation. Pellet feed quality and the influence on the major performance indicators, such as weight recovery of slimes, selectivity index, metallurgical recovery, flotation kinetics of iron minerals and gangue is also emphasised. The investigation resulted in a classification of iron ores according to their mineralogical composition, morphology of the crystals, and/or texture and microstructure of mineral particles with respect to desliming and flotation performances.

Jan 1, 2005

By W Mackinnon

Coal mining operations require the expenditure of appreciable start up and working capital in order to produce saleable coal for domestic or export markets. The competitive nature of the coal business restricts margins, and so it is imperative that downside risks, in terms of production outcomes, are minimised. The major risks identified for a coal mining operation, aside from sales volumes and coal price, are generally thought to be confined to the geology of the deposit and the mining process. However, the impact of product quality and yield can be very significant. If product coal is inferior to projections, then it will need to be sold at a discounted price and this can dramatically impact on margins. Equally, if yield is five to ten per cent less than planned, then this will have a huge effect on profitability. This paper will look at issues relating to in situ moisture and density, resource quality evaluation, modelling of washability and dilution, and simulation techniques, and how best practice approaches can be incorporated into mine planning and feasibility studies. Risks are best modelled and understood by adopting a detailed approach that is fully documented and auditable. This is particularly needed for multi-seam and multi-product operations. Once a well defined systematic approach is established the potential risks can be evaluated by testing different scenarios, carrying out sensitivity analyses, variability modelling and examining extreme operating conditions. These have been discussed in the paper, along with some related issues such as the cost of quick fixes and the value of spending a little more in the coal preparation area.

Jan 1, 2003

The Canadian mining industry was in turmoil in the early 1980s. The post-war era based on reconstruction faded away after the high demands for minerals in the 1950s and 1960s. Also, the industry had the misconception that the demand growth would continue for ever but the rapid growth of resource industries in the third world in the 60s and 70s, resulted in worldwide production overcapacity. The Canadian mining industry eventually recognised the facts and took drastic action for cost control and innovation in technology. The cost control had an immediate effect on the survival of the industry but resulted in only limited incremental gains. The economic problems that the Canadian mining industry faced in the early 1980s can be viewed now as a blessing in disguise. It was realised that for the Canadian mining industry to survive in the 21st century further gains were possible only through innovative technology. This conclusion led to a flurry of activity to establish mechanisms and delivery systems for innovative technology in the mining industry. Despite the initial difficulties in accepting high technology in the mining industry, it is being used increasingly in mining operations and will make future mining operations unrecognizable to present day mining engineers. The concept of an underground mine without underground staff seems to be far fetched, but it is possible that mines of the 21st century will approach the concept of very few underground operating personnel.

Jan 1, 1988

By S C. Dominy

A high nugget effect and the presence of coarse gold characterises many vein-gold deposits. The effective sampling of these deposits is often difficult because of the relatively low concentrations involved and erratic nature of the gold. Geological complexity often compounds this effect. Underground development, in-fill drilling and bulk sampling/trial mining are often required to delineate Ore Reserves. Winzing is an historical technique that was used to gather geological and sampling data during underground exploration. It permits access to the mineralised structure below the current datum to help determine viability. Winzing has always been considered an arduous and dangerous task. Modern technology has led to the development of the Mobile Supersucker, essentially a giant vacuum cleaner. This system permits safe and efficient winzing activities, and allows the collection of bulk samples for grade estimation. Bulk samples from horizontal development have long been collected to help define mineable grade. However, when defining blocks below current development, there has been over-reliance on ineffective æsmall sampleÆ drill data. The Mobile Supersucker permits safe and cost-effective development of winzes and off-winze sublevels.

Jan 1, 2003

By M Zaluski, D Bless

An innovative, biological treatment process has been designed by MSE Technology Applications, Inc to treat and control acid mine drainage (AMD). A field-scale demonstration is being conducted under the Mine Waste Technology Program using water flowing from a historic mine in Montana. A successful demonstration of an in situ process will allow it to be employed at numerous other abandoned or remote mines, which discharge AMD, an acidic, metal-contaminated water. Conventional treatment methods are costly and are often impossible to use at remote locations. MSEÆs technology uses a biological system to clean up AMD. The In situ Passive Biological Treatment Process utilises nonpathogenic bacteria, which are able to neutralise acidic mine water and remove contained toxic metals. These bacteria live within a series of pile-type reactors inside the mine. The bacteria are fed inexpensive waste products. The resulting discharge is clean water flowing from the mine. This presentation will show that this technology offers a natural cleanup method for the nationÆs numerous abandoned mines. Work on this project was conducted under Interagency Agreement No DW899388-70-01-1 between the US Environmental Protection Agency and the US Department of Energy (DOE), and was performed at the Western Environmental Technology Office through the DOE National Environmental Technology Laboratory (DOE Contract No. DE-AC22-96EW96405).

Jan 1, 2003

Cleaner Production stands for a proactive and preventive approach to industrial environmental management and aims for process- and/or product-integrated solutions that are both ecologically and economically efficient (æeco-efficiencyÆ). Pioneers in the field were large manufacturing and processing industries in the USA (since the late-1970s), but it took until the early-1990s before Cleaner Production was generally recognised as a valuable approach for large and medium sized enterprises. The application of Cleaner Production in mining and minerals, metals and energy production appears to lag behind other sectors, such as manufacturing and processing. This paper starts with a discussion of the Cleaner Production concept and provides examples of its application from a few selected Australian mining and minerals processing industries. This evidences that Cleaner Production can achieve significant reductions in environmental impact, in terms of reduced waste and emission generation and in terms of conservation of materials, energy and water, while simultaneously reducing operating costs. The paper then investigates a number of key issues pertaining to the implementation of Cleaner Production; ie organisation and management of Cleaner Production activities, effective tools for mastering the Cleaner Production concept as a way of life, and performance measurement.

Jan 1, 2002

By Reilly SY, Green TH, O&apos

Alkali feldspar meggacrysts are commonly found (with aluminous clinopyroxene, kaersutitic amphibole, titanomagnetite, ilmenite and apatite, and more rarely with zircon and corundum) in alkalic basalts and their derivatives as discrete crystals and fragments. They are commonly euhedral or subhedral and may be up to 15 cm in size. Their occurrence has been reported from many localities around the world, e.g., Africa, Antarctica, eastern Australia, eastern China, East Fife (Scotland), Eifel (Germany), Massif Central (France), Mongolia, New Zealand, New Mexico (USA) and Siberia (USSR). These megacrysts are relatively homogeneous and belong to the Na-rich anorthoclase group, although Kutolin and Frolova (1970) called them sanidine due to their monoclinic nature. The majority of megacrysts have a molar orthoclase content (Or%) between 20 and 30 (Fig.1). These anorthoclase megacrysts possess a high degree of disorder, with the structural state belonging to the high albite-high sanidine series (Hoffer and Hoffer, 1973; Chapman, 1976).Published interpretations of the origin of anorthoclase megacrysts fall into the following two categories: either (1) Anorthoclase together with the associated pyroxene and amphibole crystallized from basaltic magmas as phenocrysts (cumulate phases) at high pressure and the present host basaltic rocks are the parent magmas for the anorthoclase megacrysts (Binns,l969; Binns et al. 1970; Kutolin and Frolova, 1970; Hoffer and Hoffer, 1973; Laughlin et al. 1974); or (2) Anorthoclase probably crystallized from a more evolved liquid at relatively lower pressure and was then picked up and carried to the surface by a later

Jan 1, 1990

By Evans RH, Todd G

Statistical thinking and statistical process ppq;ro4 are essential adjuncts of total quality management aqd too continuous improvement of operating efficiency arid, p*Nc; a4 W,

Jan 1, 1991

Erratic, though spatially localised occurrences of gold particles are a common feature of high-nugget gold systems. In many cases, gold is present as isolated or clustered, often coarse particles. The nugget effect is a part consequence of small-scale geologically controlled enrichment, and the inclusion or exclusion of gold particles from samples. Economic zones are generally contained within discrete structurally-controlled ore shoots which are surrounded by, and may include barren to low-grade background material. Problems are often encountered where small sample types (eg drill core and channel samples) of a few kilograms mass understate in situ grade by up to a few orders of magnitude, due to their general inability to represent the true gold particle distribution. This leads to uncertainty in mineral resource estimates. This contribution presents case studies where geologically-based parameters have been collected from drill core and underground faces to support grade determination. These parameters - or proxies - are based on mineralogical and/or geochemical (eg specific elemental ratios, fluid inclusion compositions and elemental correlations) criteria. Such criteria can be correlated with different grade domains to provide an indication of true grade within a geologically-controlled context. Proxies have recently been used to support resource estimates reported in accordance with the JORC Code.

Mar 1, 2010

By R Grogan

The Ungay-Malabago polymetallic deposit, currently owned by Lafayette Mining, is located on the eastern end of the island of Rapu-Rapu which lies east of the city of Legazpi in the Philippines. The island is sparsely populated and has largely been deforested by extensive logging some 30-40 years ago.The deposit is situated on a plateau some 200 m asl and lies about one kilometre inland from the coast. The site topography is difficult with minimal flat areas for plant facilities. The region around Legazpi is subject to volcanic activity and though the island is not affected it is in a seismic zone. There is no other mining or other industrial activity on the island, the local inhabitants being engaged in subsistence farming and fishing. These activities place a high level of responsibility on the mine operator with regard to the environment and the provision of employment and training to the local inhabitants. Although no previous mining was carried out at Ungay, shallow pit mining for high-grade direct smeltable copper ore has occurred during the mid-1900s in an area, known as Hixbar, some 2 km west of the deposit This area is currently being explored by Lafayette.

Jan 1, 2002

By J E. Everett, M L. James

When iron ore is crushed and split into lump and fines components, there are systematic differences between the lump and fines grades. Generally the lump product is richer in iron and lower in the other minerals, compared to the fines product. The grade differences between lump and fines, together with the lump percentage, are referred to as the ælump algorithmÆ. Mine estimates of grade, based on exploration or blasthole drilling, relate to head grade. The ælump algorithmÆ predicts lump and fines product grades from the head grade. This knowledge is important when developing mine plans. Different ore types can be expected to have systematically different lump algorithms. Previously, lump algorithms for specific ore types have been estimated by running the crusher with a single ore type over a sample period. This method is costly, interferes with production, and yields results of limited statistical power. It has been found that weighted-least-squares (WLS) multiple regression can be used to ascribe lump algorithms to different ore types, provided sample periods have sufficiently varied ore type mixes. This study discusses the method and its application to the analysis of Mining Area C crusher production records to estimate the separate lump algorithms, which could be applied to the different ore types. The analysis has enabled the set up of lump algorithms in the production system, to improve the grade control of lump and fines product. Some other relevant applications of the WLS multiple regression approach are also considered.

Jan 1, 2005