Search Documents

By J. M. Shafer

Jan 1, 2005

Jan 1, 1957

Jan 1, 1951

PRESIDENT BOTTOMLEY: Gentlemen, the next order of business, if you wish to discuss it is Mechanical Loading. We still have a little time left that could be devoted to that subject, and the meeting will be open now for that purpose. Where is Mr. Edge- worth? J. E. EDGEWORTH (Foreman, Union Pacific Coal Company, Rock Springs, Wyoming): Here. PRESIDENT BOTTOMLEY: Yon start the ball rolling. Tell us what you are doing in the Rock Springs District, on the mechanical loading. SECRETARY SHURART Mr. Edgeworth is the man at the face handling the coal. He never sees the light of day these late winter mornings.

Jan 1, 1927

Jan 1, 2008

By Todd A. Myers

Forward Looking Statement Disclaimer This presentation may include forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including statements about the Company's vision, strategy, operations, growth, development and any other statements containing the words, "believes, " "expects, " "anticipates, " "plans, " "estimates, " and similar expressions. There are a number of factors that could cause Westmoreland Coal Company's actual results to differ materially from those indicated by such forward-looking statements including, but not limited to: general economic and business conditions; healthcare cost trends; the Company's ability to manage growth and significantly expanded operations; the ability of the Company to implement its business strategy; the Company's ability to pay the preferred stock dividends that are accumulated but unpaid; the Company's ability to retain key senior management; the Company's access to financing; the Company's ability to maintain compliance with debt covenant requirements; the Company's ability to successfully identify new business opportunities; the Company's ability to achieve anticipated cost savings and profitability targets; the Company's ability to utilize its tax net operating losses; demand for electricity; the effect of regulatory and legal proceedings; and other factors identified in the Company's most recent Annual Report on Form 10-K and subsequent reports filed with the SEC. The Company disclaims any intention or obligation to update any forward-looking statements as a result of developments occurring after the date such statement was first made.

Jan 1, 2008

Jan 1, 1973

By J. J. Welch

The thought and practices in the field of accounting in the past two or three years are undergoing far-reaching changes, but more important than this is the changing viewpoint of business managers toward accounting reports and statistics. Accounting is no longer considered a necessary burden of business, for progressive managers and operating officials everywhere look upon it as a service. A service of supplying operating men and executives with information on their affairs which enables closer and more effective supervision, to the end that business may be conducted more satisfactorily and more profitably. This service is the real function of accounting in business management. Of the many treatises on accounting published in recent years, the great majority deal with principles and procedures, and were written purely from the accountant's point of view, thus they appeal, and are of interest, chiefly to accountants. Recently, however, the interest displayed by the operating man, be he president, general manager, superintendent, mine foreman or potential mine executive, calls upon the accounting department to serve him in furnishing him with figures showing the financial position and economic progress daily. In order to effectively render this service the necessary co-operation between management, operating and accounting -forces must exist. Satisfactory services may be developed only on a basis of close contact and pulling together between these departments. It is not a one-man job, the responsibilities necessarily rest on all. This co-operation contemplates:

Jan 1, 1932

By J. J. Wilson

To explain in detail the manufacture of seamless pipe and tubes is something I venture to say that has never been done to a point entirely satisfactory. The manufacture of seamless tubes dates back to 1885, when Mannesmann Brothers invented the roll-piercing mill. Ten years later R. C. Stiefel invented the disc-piercer, which first came into general use in this country. At the present time the Mannesmann roll and the Stiefel disc-piercers are used, the Mannesmann rolls particularly for the larger size billets. Sizes produced at first were relatively small and the product was cold drawn to provide a smooth surface. The early uses of seamless material were chiefly for mechanical purposes, such as boiler tubes and bicycle tubing, and the latter for some years taking the heaviest tonnage. Improvements in the hot process were gradually made; the early Pilger type rolls were largely superseded by the two-high rolling mill for rolling out the tube after being pierced, the reeling machine for diagonal rolling, the sizing mill for giving exact outside diameter, and finally the sinking mill for reducing larger diameter tubes to smaller diameters.

Jan 1, 1932

By Franklin P. Wood

Unnumbered ages have passed since the time when nature's laboratories were working without the aid of capital or labor unions assisted only by earth's cooling crust and old Sol's rays, to lay the prodigious coal beds of the earth and distil the oils which now furnish the basis for the world's great industries. Strangely enough rays from the same old sun probably somewhat diminished in intensity are still drawing from earth to clouds the water that will run down hill and through man-made devices produce energy to compete with that made with the products created in ages past. So now we find that within the past century vast human industries have grown up around the products of these agencies and here we are today discussing the many problems connected therewith and among the others the subject of this paper, which is essentially the relation of COAL to OIL in industry. The problems involved are those of human relationship and are not fundamentally unsolvable when engineering skill and knowledge is properly applied. The last few years has developed a brand of pessimism that is especially prevalent in the coal industry, at any rate in the west where we come in contact with it. In any general discussion with coal men, a very short time only is required to bring out the feeling or expression that the coal business is on the rocks and the reasons run the gamut of human deviltry. We have heard that in the not far distant past corn was so cheap that the farmers were compelled to burn it and thus deprive the coal mines of their well earned right to sell coal for this purpose. We have heard that the flood of oil is so vast that it was being burned in preference to coal, and to heap insult on injury that the rail- road locomotives were burning oil in order to pull coal away from the mines. We have heard that the union was responsible for all the woes to which the industry is subjected. We have heard that the family tin lizzie is so depleting the family exchequer that coal could not be purchased and if purchased could not be collected for. We have heard that producing mines are so numerous that the profits are a negligible quantity. These are but a few of the reasons assigned for making the coal producers a class of pessimists which is not good for the industry. All these reasons given and all the others must be taken collectively and these are not the cause but the effect of a rapidly changing civilization. An analogy may be found in the experience of many of us in the electric industry a few years ago. You may remember that less than 20 years ago the high efficiency Tungsten electric globe was introduced. It was so much more efficient than the old carbon lamp that only one-third of the current previously required was needed to produce the same illumination. Consternation seized the ranks of electrical men who had little or no vision, for the out- look was that so little current would be sold that everyone would be bankrupt. This limited vision, however, did not prevail, for all engaged in the industry spurred on by necessity, accomplished many of the things that we are now enjoying the fruits of be- cause the electric industry has grown and is growing by leaps and bounds and every highly efficient improvement is greeted with rejoicing. It is well known that when the old type of carbon arc lamp began to be replaced by modern units the manufacturer of carbon rods thought his doom was sealed and yet these same manufacturers have so adjusted them- selves to conditions that the dry battery business of today is of vastly greater volume and profit than was the carbon rod business of the past. Of course, there are industries that should not have survived anyway that have gone down and out to makeway for vastly improved conditions and can

Jan 1, 1925

MR. TESCHER (Disaster at Dawson) : I move that you appoint a committee of nine members of this Institute to draft a set of resolutions that we can send out to all members of this Institute, to the mine officials in all four states, that might go towards preventing these disasters; that we reach all men, all mining men, mine officials of all kinds. I think we have enough brains to carry out a few suggestions of that kind. I think you are fully familiar or know men who are fully qualified to act on this committee. The only qualification that I have is to ask that Mr. Harrington be appointed a member of this committee. PRESIDENT WHITESIDE: You have heard the motion, and I believe it was seconded. Is there any discussion? That is a subject that really needs a great deal of thought. MR. LAMB: Things like that can't be handled in a minute. What Mr. Tescher suggested is all right, but to my mind, going into a great many of these different properties, seeing the conditions, such things hit pretty close to home. I would suggest that you put this off; lay it over until such time as the people who had the disaster have some time to think these things over. It is too soon to offer even a suggestion. Suggestions are all right, but there are no nine living men in the United States who can stand up or sit down and talk it over and give you any reasonable answer, in one hour or six months. First, you would naturally have to go down there and converse with the men who were at the camp at the time. You are all operators; all you operators would -like to talk it over today. You realize that anything that is good for the camp is always acceptable in disasters of this kind. I say, do it gracefully and not by publication. MR. TESCHER: I feel that the men present know these suggestions by heart and they don't have to discuss them. They know them instinctively and they know they will apply to any mine. It must be understood that if these suggestions are not carried out, they ought to be; and there is a motion before the house. PRESIDENT WHITESIDE: Mr. Murphy, you started to rise to your feet a moment ago. Have you anything to say on the subject? MR. MURPHY: I have just returned from a visit to Mr. Brennan. Mr. Brennan and I have worked together for twenty years. The manager of our company asked me to go down there and express his sympathy. Those things come to all men if they live long enough, in the coal business, and he wanted me to express to Mr. Brennan personally his sympathy and deep regret. What I had in mind when I started to rise, was to suggest that the Institute as a whole express its sympathy to Mr. Brennan. I don't think there is a man in Utah, Wyoming, Colorado or New Mexico who has done more in safety' lines than Mr. Brennan, and it just seems bad luck that he had this disaster, and I am in hearty sympathy with the gentleman who spoke about not appointing this committee. I believe a resolution to Mr. Brennan would be very much better. JAMES DALRYMPLE: I am in sympathy with this gentleman here. I think it is going to hurt the feelings of those connected with the mines in which this disaster occurred. If you will give me the privilege for a few minutes, I will gladly express myself and the action that has been taken in the past by this Institute, and my opinion combined with a great many other opinions. And what I am going to say is going to be said by the-well, I am going to say it as I see it. I am going to say it not in an unfriendly spirit, but from a spirit of not undue criticism. I happen to be one of the original members who organized this Institute. I did what I could to obtain memberships. I remember very well when we had our first meeting that we had a very large membership. I think I have a photograph of the members which was taken on the steps of the Capitol building at that time. Our membership at that time was composed largely of underground officials. I mean by "underground" officials, the superintendents to some extent, the mine foremen, their assistants,

Jan 1, 1923

Jan 1, 1964

PRESIDENT MOSES: I thank you, Mr. Emrick. Mr. Shubart would like to supplement your paper with another article. SECRETARY SHUBART: My paper really should not supplement Mr. Emrick's paper, because I secured some data from him, I knew Mr. Emrick had had a great deal of experience in shearing and I thought he could give you some useful data. (Here Mr. Shubart read the following:) "For the past two years, there has been considerable discussion among coal mining men concerning the advantages of a shearing cut in addition to the undercut, in mine work. We have had a number of requests for information on sheared coal. We were asked questions like these: What percentage increase in lump can be obtained from sheared coal? What has been the experience of mine men who have employed the shearing cut? Is the shearing cut a means of increasing the lump content? If so, is it increased to such an extent as to warrant the installation of shearing machines? Upon investigation it was found that no one could give us any definite information on the subject as no one had weighed separately the grades of coal produced from' the shearing cut. With a view of getting this information first-hand, the Goodman Manufacturing Company built up a shearing machine to be used in experimental work only. The officials of the Troy Coal Company were eager to share in the expense of obtaining this information, so that in May of this year we shipped to their mines our first type 319 shearing machine. The Troy Coal Company operates a mine at Troy, Illinois, in the No. 6 seam and produces about 275 tons daily. The coal seam averages five and one-half feet in thickness. Previous to the arrival of the shearing machine the coal was undercut six feet deep by a' Goodman Shortwall Machine. To break down the coal required two shots in the entries and three in the rooms. The percentage of lump measured over two-inch screens, averaged 58.2 per cent. The conditions of the mine were very favorable for obtaining accurate weights on the amount of lump and slack coal run over the shaker screens. The shearing machine easily cut the entire tonnage of the mine so that all coal dumped into the railroad cars had been produced from a shearing cut, in addition to an undercut. Accurate records were kept of the railroad weights and front this data the percentages of lump and slack were computed. During the month of June the percentage of lump produced over two-inch shaker screens was 69.9 per cent. This result demonstrated that the introduction of the shearing cut had increased the percentage of lump twenty per cent. The entries were driven ten feet wide and the rooms thirty feet wide The shearing cut was made near the center of the face in all places. A hole was drilled in each rib and the coal shot down with one-half the powder required when the places had been undercut only. The coal was broken down to the back of the cut so that very little pick work was necessary to load it out. The benefits derived from the shearing cut were as follows: 1. Increased percentage of lump, thus increasing the average price of coal per ton. 2. Preservation of a tender top due to the decreased amount of explosive used. 3. Facilitated handling of coal by the miner thus increasing the tonnage per man. 4. Eliminated coal yardage in entries and crosscuts of ten feet or less in width for the reason that the shearing cut provides a loose end from which to shoot the coal. This applies to the union fields only, as the non-union mines do not pay for coal yardage. Based on a price of $2.50 for lump coal and $1.25 for slack coal, the average price per ton was increased

Jan 1, 1926

[ ]

Jan 1, 1990

By Gilbert Davis

MR. DAVIS: When the Secretary asked me to continue our accident experience in safety work at Dawson to cover the year just closed, I rather felt that he was asking 'a good deal, for we had said about everything that we could last year. I am not going to say very much, but in line with his request I have merely brought the figures up to date. I want to say, to start, that 1934 was, rather disappointing. It was the poorest year since 1930, as you will notice (indicates on diagram). This first column represents the accidents per thousand shifts worked. We cannot assign any real valid reason for the increase. We think we worked just as hard, but we are rather inclined to lay it onto the times; in other words, to lay it to the unrest and the changing conditions that are existent not only in this country but probably all over the world. We had twelve lost time accidents last year. As I explained last year, a lost time accident with us is an accident wherein the injured man is not able to return to his regular work, the next day-the day following the injury. So this represents (indicating) the lost time accidents per thousand shifts worked. We had one fatality in the twelve accidents which is reflected in the severity rates, which are also based upon thousand shifts worked instead of per million hours. The reason we are on the thousand shifts worked is be¬cause the Copper Branches of the Phelps-Dodge Corporation are all kept that way, and we are on the same basis for easy comparison.

Jan 1, 1935

[Addison, Herbert Big Horn Colleries Co., Colo. Bldg., Denver, Colo. Aleshire, N. C c-o Roberts & Schaefer Co., Wrigley Bldg., Chicago, Ill. Alexander, John Dacona, Colo. Allan, David Lafayette, Colo. Allen, John Ludlow, Colo. Allen, Thomas Box 420, Glenwood Springs, Colo. Alley, Gerald C. F. &I. Co., Pueblo, Colo. Allison, ArchieBox 562, Walsenburg, Colo. Allison, D. S 1331 Roberta St., Salt Lake City, Utah Allison, Park Engineer, Standard Coal Co., Standardville, Utah Allonier, Howard R c-o Lunkenheimer Co., Cincinnati, Ohio Ambler, J. B c-o Ambler & Riter, Kearns Bldg., Salt Lake City, Utah Anderson, A. E 403 Ideal Bldg., Denver, Colo. Andrews, Sam 503 Pike Ave., Canon City, Colo.. Angster, Joe Walsen, Colo. Angus, William B. W. Snodgrass, 1575 Lafayette St., Denver, Colo. Apperson, A. B Tramway Bldg., Denver, Colo. Armstrong, C. D Apperson Vallery Co., Tramway Bldg., Denver, Colo. Arnoldi,, Victor Ideal, Colo. Autrey, J. S Perrenaud Apts., Denver, Colo. Bachman, W. H 1601 Alcott St., Denver, Colo. Bailey, R. E Utah Power & Lt. Co., Kearns Bldg., Salt Lake City, Utah Baird, Elmer A Equitable Bldg., Denver, Colo. Bartlett, G. F 311 Ernest & Cranmer Bldg., Denver, Colo. Baxter, John M 3748 Lafayette St., Denver, Colo. Becker, J. A Box 682, Rock Springs, Wyo. Beebe, John. D 1414 Court Place, Denver, Colo. Bennett, F. C Colorado Fuel & Iron Co., Berwind, Colo. Benson, Geo Cumberland, Wyo. Betcher, B. L Standardville, Utah Beuchat, Charles Pryor, Colo. Bevan,John 1625 North Corona St., Colorado Springs, Colo. Bisch, James L Van Houten, N., M. Boissier, A. H. C Boston Bldg., Denver, Colo. Bottomley, Edward Kleenburn, Wyo. Bowen, James V Union Coal & Coke Co., Colorado Bldg., Denver, Colo. Bowie, Alex R Bowie, Colo. Bowie, John S Bowie, Colo. Bowie, Wallace D Bowie, Colo. Bowns, W. J Castle Gate, Utah Boyer, F. E 631Jackson St., Denver, Colo. Boyle, Chas Sweetwater, Wyo. Brandenburger, L 59 W. Broadway, Salt Lake City, Utah Brennan, W. D Dawson, N. M. Brewster, Burt B Walker Bank Bldg., Salt Lake City, Utah Brockman, A. L Sugarite, N. M. Brooks, Ed 513 Second St., No. 1 Hill, Rock Springs, Wyo. Brown, Geo. A Cumberland, Wyo. Brown, L. E :.1212 Walker Bldg., Salt Lake City, Utah Brown, Mark Y 629 East Main St., Trinidad, Colo. Bubb, H. H Cokedale, Colo. . Bullock, W. H 1052 Gas & Electric Bldg., Denver, Colo. Bunning, P. C Rock Springs, Wyo. Burnite, Thomas B 523 Boston Bldg., Denver, Colo. Butler, T. H Hanna, Wyo.]

Jan 1, 1924

Please note all Proceedings of the Institute were taken verbatim by stenotypists from Hyatt & Associates of Denver and editing has been minimal. MR. MORTENSEN: On behalf of the Rocky Mountain Coal Mining Institute, I take great plea¬sure in saying good morning to you at Vail. With a few clouds in the sky, at least we won't get sunburned. We won't have to worry about our kids in the swimming pool, perhaps. It is delightful for me to have been able to have represented the Rocky Mountain Coal Mining Institute for the year 1982-1983. This has been our 71st year and this is our 79th meeting. In recognizing the attendance here, that dinner we had last night, and some of our entertainment must have gotten to some of us, or it is a little early. But I'm sure as the day goes on, and with the speakers outlined, it will be very beneficial for those who do attend. We do appreciate your attendance. I'd first like to make an introduction of our head table. Doris Finnie, she is our executive secretary. As most of you are aware, Gussie Whiteside retired as secretary. This will be the first time since the Institute started that there has not been a Whiteside present at one of our conventions. I'm sure Gussie would appreciate any calls or letters that any of you would care to make to her. Doris, I might add, has been a great help to me and all of the people who have been working on the program for the Institute this past year. There's been lots of reorganization and we are very pleased with Doris's ability to take hold from Gussie without any waves. Much credit must be given to you Doris for this and we do appreciate the help you have given us and believe me she has kept us out of trouble. Next, we have Art Neill. He is our vice president of the Institute from Montana and he also works with Western Energy Company. We appreciate the help that all of these session leaders and chairmen give to us. We have other names on the head table, but they will fill in as the morning goes on, so we won't bother you with any of those at this time. To set the stage for business, first I would like to call on Doris for a motion to approve the minutes of last year. MS. FINNIE: Thank you, Vernal. Mr. President, I suggest that the reading of the minutes be dispensed with and that the members refer to pages 9 through 80 of the Proceedings for the 78th regular meeting of RMCMI, as published MR. MORTENSEN: Thank you, Doris. Do we have a motion to so approve? MR. LINVILLE: I so move. MR. MORTENSEN: Loren Linville so approved. Do we have a second? MR. GARR: Second. MR. MORTENSEN: All in favor say aye. (Audience responded affirmatively.) MR. MORTENSEN: Those opposed? Hearing none, the motion is carried. I'm sure glad we didn't have to read those 80 pages. Is Doug Hammer in the audience? He was going to give us a list of new members of the Coal Institute and ask for your approval. But because of his absence, the names will be listed so that you can read them at a later date, I will entertain a motion that we approve the new members who have joined the Institute. Do I so have a motion? MR. BERNSTROM: I would make that motion. MR. GARR: I second. MR. MORTENSEN: Do we have any questions? All in favor¬ (Audience responded affirmatively.) MR. MORTENSEN: Any opposed? Hearing none, the motion is carried. Next, we'd like to proceeed with our Nominating committee report from the chairman, George Nugent, and the election of next year's officers. George, would you please take the stand? MR. NUGENT: Mr. President, and members of the Institute, your Nominating committee consists of five past presidents of the Rocky Mountain Coal Mining Institute. From Colorado Roy Coulson; from New Mexico, Bob Wilson; from Utah, Bob

Jan 1, 1983

President Loren V. Linville opened the meeting at 930 a.m. He called on the Auditing Committee to give its report. Bob Wilson, Chairman, read the report and asked that it be approved. A motion was made, seconded and carried. The Resolutions Committee was asked to present its report. Mr. Herman Van Houten submitted the following: (I) RESOLVED, WHEREAS, in the year since the last convention of The Rocky Mountain Coal Mining Institute, the Institute and the Coal Mining Industry have suffered the loss through death of the services of: Thomas L. Gambill William G. Gray W. S. Landers J. O. Lively J. Vaughn Wilcox NOW, THEREFORE, BE IT RE- SOLVED, that there be spread upon the minutes of The Rocky Mountain Coal Mining Institute recognition of the passing of these members, who have so greatly contributed to the advancement of the industry, both nationally and in the Rocky Mountain area, and that a copy of this resolution be sent to the next of kin as evidence of the sincere regard and sympathy of the members of the Institute.

Jan 1, 1980

By Wm. Monay

MR. MONAY (Vice President Kinney Coal Co., Scofield, Utah): The past year and a half has witnessed a series of coal mine disasters in Utah and Wyoming, concentrated into the short space of a few months, following a long period of years in which the industry was comparatively free from devastating calamities. The natural result has been a hysterical activity on the part of bureaus, commissions and professional reformers who know little about coal mining from a practical standpoint. This activity has been met by the industry in Utah with an attitude of submission, no doubt the result of the fear of being misunderstood by the public. But it is my firm conviction that the lives and property of the coal industry will find their surest guaranty of protection in the humanity, and in the self interest of those operating and working in the mines, rather than in governmental regulation. Inelastic, inflexible blanket statutes and rules will simply stifle and hamper the initiative and progress of our industry in working out its own salvation, under the varying and changing conditions of different localities, different conditions, and in different mines. We who have spent our lives in digging in the mines and operating them, know more about this business than anyone else and I believe it is time for us to speak up and no longer sit meekly by while inexperienced bureaus and unskilled commissions make up laws, rules and regulations for us which when made are on the books to stay, even though in a short time they may prove inapplicable, in whole or in part, or be superseded by something different, and which in some cases create new dangers or lull us into a false sense of security. Shortly after the Castle Gate explosion in March, 1924, a new set of safety rules was issued by the Indus- trial Commission of the State of Utah to become effective July 1st of the same year, the most important of which prohibits the use of black powder in any mine--gaseous or non-gaseous; prohibits the use of open flame lamps in any mine-gaseous or non-gaseous; and requires that rock dusting in all main haulage ways as far as the freezing point and required that all mining machines be equipped with water to be applied while cutting. These rules have been characterized as "Utah's Monument to her Dead Miners" in a large poster spread broadcast over the country from an office in New York that styles itself the Association for Labor Legislation. In reviewing the coal mining history of the State of Utah, in the year 1900, a serious disaster occurred at Winter Quarters. The cause of the same is believed to be an explosion of powder that was stored in the mine, which was a common practice in the early days, and from that time until the Castle Gate disaster, March 8, 1924, a period of some twenty-four years, no explosion of any kind occurred in this district. During all this period open lamps were used, considerable black powder was used, rock dusting was unheard of, sprinkling with water was very generally done-all without any catastrophe. Since the adoption of the new rules, we have 'had a very violent explosion at the Carbon Fuel mine in Spring Canyon. At the time of this explosion, 3,000 feet of the main slope had been rock dusted several times between July 1st and September 21st. The second left entry, which is a main haulage way, a distance of 3,000 feet was completely rock dusted on the date of the explosion. This mine is not considered extremely gaseous, yet an explosion as violent as that of the Castle Gate mine occurred. Some thirty men who had been loading coal in various parts of the mine on this Sun- day, the day of the explosion, and other men employed in rock dusting the second left entry, had just left the mine a little while before it occurred, and no abnormal condition in the mine was noted. At the time of the explosion five machine men were in the mine.

Jan 1, 1925

Past President Shirl McArthur opened the meeting at 9:30 a.m. He called on the Auditing Committee to give its report. Stan Shubart, who checked the financia1 report of the treasurer, read the report. He asked that it be approved. A motion was made, seconded and carried. Shirl thanked all the committees for an excellent job in making this meeting a most successful one. Special thanks to Park Lamborn for a fine program and to Gussie Whiteside for all her efforts in behalf of the Institute. An increase in salary was voted for the secretary-treasurer. It was decided to return to Vail for the 1979 convention. The Resolutions Committee was called upon to give its report. Roy Coulson, Chairman, submitted the following: (I) RESOLVED, Whereas, in the year since the last convention of The Rocky Mountain Coal Mining Institute, the Institute and the coal mining industry have suffered the loss through death of the services of: O. F. Bridwell C. L. Book O. F. Lewis Frank Kolar O. H. Littrell L. B. Phillippi Weston L. Potter George C. Trevorrow

Jan 1, 1978